Abstract
It has been established that in order to obtain a high-quality image of a surface structure in polarized light with crossed nicols and to accurately quantify the bainitic fraction in Kh2G2S2MF grade structural steel, alongside with the LePera reagent, Nital reagent can be used. It has been established that the brightness level of martensite in polarized light does not depend on the etching time of 22Kh2G2S2MF and 44Kh2G2S2MF grade steel being at the background level.
REFERENCES
Yurchenko, A.N. and Simonov, Yu.N., Structural features, mechanical properties, and heat treatment of bainitic steels, Vestn. Permsk. Nats. Issled. Politekh. Univ. Mashinostr. Materialoved., 2016, vol. 18, no. 3, pp. 160–181.
Bhadeshia, H.K.D.H., Bainite in Steels: Theory and Practice, London: CRC Press, 2001. https://doi.org/10.1201/9781315096674
Yurchenko, A.N., Simonov, Yu.N., Panov, D.O., and Zhitenev, A.I., Transformations, structure and properties of steel 22Kh2G2S2MF under continuous cooling, Met. Sci. Heat Treat., 2019, vol. 61, nos. 9–10, pp. 617–621. https://doi.org/10.1007/s11041-020-00469-5
Yurchenko, A.N., Simonov, Yu.N., and Efimova, O.V., Determination of the complex structure of structural steel by the method of color etching, Met. Sci. Heat Treat., 2019, vol. 61, nos. 9–10, pp. 622–627. https://doi.org/10.1007/s11041-020-00470-y
Yurchenko, A.N. and Simonov, Yu.N., A method for revealing bainite in steel, RF Patent 2734878, Byull. Izobret., 2020, no. 30.
A method for qualitative evaluation of needle-like bainite in structural steels of type Kh2G2S2MF, RF Patent 2769111, Byull. Izobret., 2022, no. 10.
Yurchenko, A.N. and Simonov, Yu.N., Application of polarized light to estimate the bainite fraction in 44Kh2G2S2MF steel after isothermal hardening. Part 1, Steel Transl., 2023, vol. 53, no. 1, pp. 86–91. https://doi.org/10.3103/S0967091223010151
Kazakov, A.A., Kazakova, E.I., Kiselev, D.V., and Kurochkina, O.V., Method for studying the structure of pipe steels, RF Patent 2449055, Byull. Izobret., 2012, no. 12.
Kazakov, A., Kiselev, D., Sych, O., and Khlusova, E., Quantitative assessment of microstructural inhomogeneity by thickness of hot-rolled plates made of cold-resistant low-alloy steel for Arctic applications, CIS Iron Steel Rev., 2012, no. 1, pp. 41–49. https://doi.org/10.17580/cisisr.2020.02.10
Van der Voort, G., Identifying isothermally-transformed steel microstructural constituents, Tech. Notes, 2015, vol. 5, no. 4, pp. 1–5.
Simonov, Yu.N., Simonov, M.Yu., Panov, D.O., Vylezhnev, V.P., and Kaletin, A.Yu., Formation of structure of lower carbide-free bainite due to isothermal treatment of steels of types Kh3G3MFS and KhN3MFS, Met. Sci. Heat Treat., 2016, vol. 1, no. 58, pp. 61–70. https://doi.org/10.1007/s11041-016-9965-z
Kaletin, A.Yu., Kaletina, J.V., and Ryzhkov, M.A., Carbide-free-bainite in low carbon construction steels, Lett. Mater., 2020, vol. 10, no. 3, pp. 249–253. https://doi.org/10.22226/2410-3535-2020-3-249-253
Pashangeh, S., Ghasemi Banadkouki, S.S., Besharati, F., Mehrabi, F., Somani, M., and Kömi, J., Color light metallography versus electron microscopy for detecting and estimating various phases in a high-strength multiphase steel, Metals, 2021, vol. 11, no. 6, p. 855. https://doi.org/10.3390/met11060855
Pashangeh, S., Banadkouki, S.S.G., and Somani, M.C., Abnormal mechanical response in a silicon bearing medium carbon low alloy steel following quenching and bainitic holding versus quenching and partitioning treatment, J. Mater. Res. Technol., 2020, vol. 9, no. 3, pp. 5007–5023. https://doi.org/10.1016/j.jmrt.2020.03.019
Van der Voort, G., Color Metallography, ASM Handbook: Metallogr., Microstruct., 2004, vol. 9, pp. 493–512.
Kannan, R., Wang, Yi., and Li, L., A dilatometric analysis of inverse bainite transformation, J. Mater. Sci., 2018, vol. 53, no. 5, pp. 3692–3708. https://doi.org/10.1007/s10853-017-1752-8
Ben Fredj, E., Ghazemi Nanesa, H., Jahazi, M., and Morin, J.B., Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings, Iron Steel Res. Int., 2018, vol. 25, pp. 554–562. https://doi.org/10.1007/s42243-018-0070-y
Lin, S., Borggren, U., Stark, A., Borgenstam, A., Mu, W., and Hedström, P., In-situ high-energy X-ray diffraction study of austenite decomposition during rapid cooling and isothermal holding in two HSLA steels, Metall. Mater. Trans. A, 2021, vol. 52, no. 5, pp. 1812–1825. https://doi.org/10.1007/s11661-021-06192-x
Skoblo, T.S., Klochko, O.Yu., Belkin, E.L., et al., Development of the methods for evaluating the structure of rails quenched with HF currents, Stal’, 2014, no. 3, pp. 74–82.
Skoblo, T.S., Klochko, O.Yu., Belkin, E.L., and Sidashenko, A.I., Studying the structure of high-chromium cast irons, Zavod. Lab. Diagn. Mater., 2017, vol. 83, no. 5, pp. 27–38.
Shchegolev, A.V., Kletsova, O.A., Firsova, N.V., Gryzunov, V.I., and Svechnikova, V.V., Kinetics of phase transformations in roll steel 8Kh3SMF, Met. Sci. Heat Treat., 2020, vol. 61, nos. 9–10, pp. 527–533. https://doi.org/10.1007/s11041-020-00457-9
Šebestová, H., Horník, P., Mrňa, L., Doležal, P., and Mikmeková, E., The effect of arc current on microstructure and mechanical properties of hybrid lastig welds of high-strength low-alloy steels, Metall. Mater. Trans. B, 2018, vol. 49, no. 6, pp. 3559–3569. https://doi.org/10.1007/s11663-018-1385-6
Kormyshev, V.E., Polevoi, E.V., Yur’ev, A.A., Gromov, V.E., and Ivanov, Yu.F., The structural formation in differentially-hardened 100-meter-long rails during long-term operation, Steel Transl., 2020, vol. 50, no. 2, pp. 77–83. https://doi.org/10.3103/s0967091220020047
Kolbasnikov, N.G., Zotov, O.G., Shamshurin, A.I., and Luk’yanov, A.A., Study of lath morphology bainite in high-strength pipe steel, Met. Sci. Heat Treat., 2013, vol. 55, nos. 5–6, pp. 287–293. https://doi.org/10.1007/s11041-013-9621-9
Akhnazarova, S. and Kafarov, V., Metody optimizatsii eksperimenta v khimicheskoi tekhnologii. Ucheb. posob. dlya khim.-tekhnol. spets. vuzov (Methods for Optimizing Experiments in Chemical Technology: Textbook for Chemical Technological Specialties of Universities), Moscow: Vysshaya Shkola, 1985.
Skoblo, T.S., Klochko, O.Yu., and Belkin, E., Application of computer analysis of metallographical images in studying the structure of high-chromium cast iron, Zavod. Lab. Diagn. Mater., 2012, vol. 78, no. 6, pp. 35–42.
Funding
The experimental studies with the help of a transmission electron microscope were performed using the equipment belonging to the Center for Scientific Equipment Collective Use “Composition, Structure and Properties of Structural and Functional Materials” at the National Research Center Kurchatov Institute, Prometey Central Scientific Research Institute for Structural Materials.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by O. Polyakov
About this article
Cite this article
Yurchenko, A.N., Golubeva, M.V., Svyatisheva, E.V. et al. Applying Polarized Light to the Estimation of Bainitic Fraction in Kh2G2S2MF Steel Grades. Part 2. Steel Transl. 53, 707–714 (2023). https://doi.org/10.3103/S096709122308017X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S096709122308017X