Abstract
This article describes the resource-saving assembly of continuous casting and deformation for production of three-layer bimetallic strips based on dissimilar steels and alloys. The results describe the theoretical analysis of the metal’s stress and strain state in the deformation zone upon bimetal strip production by sequential combining the layer thickness in the form of steel grades 09G2S–13KhFA–09G2S. Metallographic studies of bimetal structure and hardness along the distance of cyclic deformation zone in various sheet thickness areas are described.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
Kobelev, A.G., Potapov, I.N., and Kuznetsov, E.V., Tekhnologiya sloistykh metallov (Technology of Layered Metals), Moscow: Metallurgiya, 1991.
Sudnik, A.V., Petrov, I.V., Galinovskii, A.L., et al., Advanced use of bimetals in machine engineering, Fundam. Prikl. Probl. Tekhn. Tekhnol., 2015, no. 2, pp. 80–88.
Sirotenko, L.D., Use of bimetal materials in machine engineering, Sovrem. Probl. Nauki Obraz., 2015, no. 2-1. http://scince-education.ru/ru/article/view?id=20462. Accessed August 31, 2019.
Golovanenko, S.A. and Meandrov, L.V., Proizvodstvo bimetallov (Production of Bimetals), Moscow: Metallurgiya, 1966.
Charukhina, K.E., Golovanenko, S.A., Masterov, V.A., et al., Bimetalicheskie soedineniya (Bimetal Compounds), Moscow: Metallurgiya, 1970.
Shlyakhova, G.V., Barannikova, S.A., Bochkareva, A.V., et al., Structure of a carbon steel–stainless steel bimetal, Steel Transl., 2018, vol. 48, no. 4, pp. 219–223.
Zaitsev, A.I., Rodionova, I.G., Amezhnov, A.V., et al., Modern development of production and use of double-layer steels, Tekhnol. Kolesnykh Gusenichnykh Mash., 2013, no. 3 (7), pp. 17–22.
Golovanenko, S.A., Svarka prokatkoi bimetallov (Welding of Rolling Bimetals), Moscow: Metallurgiya, 1977.
Slyusarev, M.V., Quality parameters of bimetal sheets, Vestn. Volgograd. Gos. Univ., Ser. 9: Issled. Molodykh Uch., 2007, no. 6, pp. 176–184.
Smirnov, S.V., Gladkovskii, S.V., Golubkova, I.A., et al., Analysis of explosion welding–batch rolling process for production of composite materials, Materialy VI mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov” (Proc. VI Int. Sci.-Tech. Conf. “Modern Methods and Technologies for Creation and Processing of Materials), Minsk: Fiz.-Tekh. Inst., Nats. Akad. Nauk Bel., 2009, pp. 17–22.
Lekhov, O.S., Turlaev, V.V., and Lisin, I.V., Ustanovka sovmeshchennogo protsessa nepreryvnogo lit’ya i deformatsii. Teoriya i raschet (Installation for Combined Processes of Continuous Casting and Deformation: Theory and Calculation), Yekaterinburg: Ural. Fed. Univ., 2014.
Lekhov, O.S., Guzanov, B.N., Lisin, I.V., and Bilalov, D.Kh., The combined process of continuous casting and cyclic deformation for production of steel sheets, Stal’, 2016, no. 1, pp. 59–62.
Lekhov, O.S., RF Patent 2064364, Byull. Izobret., 1996, no. 87.
Pertsev, A.S., Panov, D.O., Smirnov, A.I., and Simonov, Yu.N., Mechanothermal processing of construction low-carbon steel 09G2S, Sovrem. Probl. Nauki Obraz., 2013, no. 6. http://scienceeducation.ru/ru/article/view?id=10860. Accessed September 18, 2019.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by I. Moshkin
About this article
Cite this article
Lekhov, O.S., Guzanov, B.N., Mikhalev, A.V. et al. Production of Composite Steel Strips on Continuous Casting and Deformation Assembly. Steel Transl. 49, 819–823 (2019). https://doi.org/10.3103/S0967091219110093
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091219110093