Abstract
The influence of nonmetallic inclusions in Э76Ф rail steel on the high-temperature plasticity is considered. In terms of the shear strain, a plasticity maximum is observed in all three zones of the continuouscast billet: the crust, the columnar-crystal zone, and the central zone of the billet. The high-temperature torsion of samples heated to 950–1250°C with 10-min holding is studied for continuous-cast billet of electrosmelted rail steel. Oxides and silicates are present in the crust; oxides and oxysilicates are found in the columnar-crystal zone; and sulfides, oxides, silicates, and alumosilicates are found in the central zone of the billet. The concentration of inclusions that impair the plasticity is greatest in the central zone of the billet.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Pavlov, V.V., Temlyantsev, M.V., Korneva, L.V., Oskolkova, T.N., and Gavrilov, V.V., Defekty i kachestvo rel’sovoi stali (Defects and Quality of Rail Steel), Moscow: Teplotekhnik, 2006.
Feiler, S.V., Polevoi, E.V., and Dement’ev, V.P., The study of the phase separation processes in continuous casting of rail steel, Probl. Chern. Metall. Mater., 2014, no. 2, pp. 23–25.
Lutsenko, V.A., Borovik, I.V., Zablodskii, I.N., and Kuberskii, S.V., Modeling of an unsteady-state process of hot rolling of continuously cast slabs subject to the liquidation, in Resursozberigayuchi tekhnologii virobnitstva ta obrobki tiskom materialiv u mashinoubuduvanni (Resource-Saving Production Technologies and Material Pressure Processing in Mechanical Engineering), Lugansk, 2010, pp. 10–17.
Elanskii, G.N., Linchevskii, B.V., and Kal’menev, A.A., Osnovy proizvodstva i obrabotki metallov (Principles of Production and Treatment of Metal), Moscow: Mosk. Gos. Vechern. Metall. Inst., 2005.
Dzugutov, M.Ya., Plastichnost’ i deformiruemost’ vysokolegirovannykh stalei i splavov (Plasticity and Deformability of High-Alloy Steels and Alloys), Moscow: Metallurgiya, 1990.
Poirier, G.-P., Plasticite a Haute Temperature des Solides Eristallins, Paris: Eyrolles, 1976.
Golubtsov, V.A., Shubya, L.G., and Usmanov, P.G., Out-of-furnace processing and steel modifi cation, Byull. Chern. Metall., 2006, no. 11, pp. 47–51.
Gubenko, S.I., Parusov, V.V., and Derevyanchenko, I.V., Nemetallicheskie vklyucheniya v stali (Nonmetal Inclusions in Steel), Dnepropetrovsk: Art-Press, 2005.
Simachev, A.S., The study of the influence of nonmetallic inclusions on high-temperature plasticity of continuously cast ingot of E76F rail steel, in Tr. IV-oi Mezhd. nauchno-prakt. konf. “Sovremennye innovatsii v nauke i tekhnike” (Trans. IVth Int. Sci.-Pract. Conf. “Modern Innovations in Science and Engineering”), Kursk, 2014, vol. 4, pp. 122–124.
Protopopov, E.V., Ganzer, L.A., and Feiler, S.V., Metal hydrodynamics in the intermediate ladle of a continuous-casting machine, Steel Transl., 2010, vol. 40, no. 6, pp. 517–521.
Simachev, A.S., Temlyantsev, M.V., Oskolkova, T.N., Peretyat’ko, V.N., and Bazaikin, V.I., High-temperature plasticity of the solidification zones of continuouscast E76F rail-steel billet, Steel Transl., 2014, vol. 44, no. 10, pp. 719–722.
Roshchin, V.E. and Roshchin, A.V., Elektrometallurgiya i metallurgiya stali: uchebnik (Electrometallurgy and Steel Metallurgy: Handbook), Chelyabinsk: Yuzh.Ural. Gos. Univ., 2013.
Roshchin, V.E. and Roshchin, A.V., Defekty stal’nykh slitkov i zagotovok: uchebnoe posobie dlya vuzov (Defects of Steel Ingots and Billets: Manual for Higher Education Institutions), Chelyabinsk: Yuzh.-Ural. Gos. Univ., 2008.
Velikanov, A.V., Reikhart, V.A., and Kaportsev, V.N., Influence of out-of furnace treatment methods on the rail quality from oxygenconverter steel, in Nemetallicheskie vklyucheniya v stalyakh (Nonmetal Inclusions in Steels), Moscow: Metallurgiya, 1983, pp. 35–42.
Gubenko, S.I., Peculiarities of steel local destruction processes near non-metallic inclusions, Nov. Nauki Pridnepr., 2002, nos. 1–2, pp. 75–84.
Simachev, A.S., Temlyantsev, M.V., Oskolkova, T.N., Peretyat’ko, V.N., and Bazaikin, V.I., Hightemperature plasticity of the solidification zones of continuous-cast E76F rail-steel billet, Steel Transl., 2015, vol. 44, no. 10, pp. 719–722.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Simachev, T.N. Oskolkova, M.V. Temlyantsev, 2016, published in “Izvestiya VUZ. Chernaya Metallurgiya,” 2016, No. 2, pp. 134–137.
About this article
Cite this article
Simachev, A.S., Oskolkova, T.N. & Temlyantsev, M.V. Influence of nonmetallic inclusions in rail steel on the high-temperature plasticity. Steel Transl. 46, 112–114 (2016). https://doi.org/10.3103/S0967091216020133
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091216020133