Abstract
The high-temperature plasticity of electrosmelted Э76Φ rail steel is investigated in the range 950–1250°C. The best plasticity is obtained at 1150°C, with satisfactory microstructure.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bernshtein, M.L., Dobatkin, S.V., Kaputkina, L.M., and Prokoshkin, S.D., Diagrammy goryachei deformatsii, struktura i svoistva stalei: Spravochnoe izdanie (Hot-Deformation Diagrams, Structure, and Properties of Steel: A Handbook), Moscow: Metallurgiya, 1989.
Temlyantsev, M.V., Gavrilov, V.V., Korneva, L.V., et al., Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2005, no. 5, pp. 47–49.
Temlyantsev, M.V., Gavrilov, V.V., Korneva, L.V., et al., Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2005, no. 6, pp. 51–53.
Temlyantsev, M.V., Gavrilov, V.V., Korneva, L.V., and Kozheurova, L.T., Steel Transl., 2005, vol. 35, no. 12, pp. 51–55.
Dzugutov, M.Ya., Plasticheskaya deformatsiya vysokolegirovannykh stalei i splavov (Plastic Deformation of Highly Alloyed Steel and Alloys), Moscow: Metallurgiya, 1977.
Simachev, A.S., Mezhdun. Nauch.-Issled. Zh., 2014, no. 3A(22), part 2, pp. 63–64.
Bashnin, Yu.A., Ushakov, B.K., and Sekei, A.G., Tekhnologiya termicheskoi obrabotki stali. Uchebnik dlya vuzov (Heat Treatment of Steel: A University Textbook), Moscow: Metallurgiya, 1986.
Peretyat’ko, V.N., Temlyantsev, M.V., and Filippova, M.V., Razvitie teorii i praktiki metallurgicheskikh tekhnologii. T. 2. Plastichnost’ i razrushenie stali v protsessakh nagreva i obrabotki davleniem (Theoretical and Practical Developments in Metallurgical Technology, Vol. 2: Plasticity and Failure of Steel in Heating and Pressure Treatment), Moscow: Teplotekhnik, 2010.
Simachev, A.S., Temlyantsev, M.V., and Oskolkova, T.N., Vestn. Gorn.-Metall. Sekts. RAEN, 2013, issue 16, pp. 79–82.
Simachev, A.S., Temlyantsev, M.V., and Oskolkova, T.N., Vestn. Gorn.-Metall. Sekts. RAEN, 2013, issue 32, pp. 23–27.
Pavlov, V.V., Temlyantsev, M.V., Korneva, L.V., et al., Defekty i kachestvo rel’sovoi stali: spravochnik (Defects and Quality of Rail Steel: A Handbook), Moscow: Teplotekhnik, 2006.
Dzugutov, M.Ya., Plastichnost’ i deformiruemost’ vysokolegirovannykh stalei i splavov (Plasticity and Deformability of Highly Alloyed Steel and Alloys), Moscow: Metallurgiya, 1990.
Temlyantsev, M.V., Kolotov, E.A., Syusyukin, A.Yu., and Gavrilov, V.V., Stal’, 2006, no. 12, pp. 33–35.
Simachev, A.S., Sovrem. Innov. Nauke Tekhn., 2014, vol. 4, pp. 122–124.
Velikanov, A.V., Reikhart, V.A., and Kaportsev, V.N., in Nemetallicheskie vklyucheniya v stalyakh (Nonmetallic Inclusions in Steel), Moscow: Metallurgiya, 1983, pp. 35–42.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Simachev, M.V. Temlyantsev, T.N. Oskolkova, V.N. Peretyat’ko, V.I. Bazaikin, 2014, published in “Izvestiya VUZ. Chernaya Metallurgiya,” 2014, No. 10, pp. 33–37.
About this article
Cite this article
Simachev, A.S., Temlyantsev, M.V., Oskolkova, T.N. et al. High-temperature plasticity of the solidification zones of continuous-cast Э76Φ rail-steel billet. Steel Transl. 44, 719–722 (2014). https://doi.org/10.3103/S0967091214100167
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091214100167