Abstract
The selection of coolants for rail quenching at OAO Nizhnetagil’skii Metallurgicheskii Kombinat (NTMK) is considered. Thermohardening in aqueous polymer solution or hot water has been developed and tested. Economically alloyed steel may be used for rail manufacture after thermal hardening by compressedair cooling. The microstructure of disperse plastic pearlite is formed in three-stage quenching, with pearlite production in the surface layers of the rail during the first two stages.
Similar content being viewed by others
References
Kolosova, E.L., Shcherbakova, L.P., Eismondt, Yu.G., and Zakharov, A.V., Polymer Quenching of Rails, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1988, no. 12, pp. 76–80.
Zakharov, A.V., Eismondt, Yu.G., Shcherbakova, L.P., et al., Quenching Rails and Rail Braces with Na-KMTs Polymer, Mekhan. Term. Obrab. Mater., 1991, no. 4, pp. 24–27.
Shlykov, A.A., Spravochnik termista (Heating Handbook), Moscow: Metallurgiya, 1956.
Konyukhov, A.D., Potapchenko, S.S., Naumov, B.N., et al., Calculating the Nonsteady Temperature Field in Bulk and Surface Quenching of Rails, Ostatochnye napryazheniya i prochnost zheleznodorozhnykh rel’sov: Trudy TsNII MPS (Residual Stress and Strength of Rails: Proceedings of the Central Research Institute of Railroad Communications), Moscow: Transport, 1973, issue 491, pp. 42–49.
Galitsyn, G.A., Dobuzhskaya, A.B., Murav’ev, E.A., et al., Russian Patent 208 119, Otkryt., Izobret., 1997, no. 16.
Galitsyn, G.A., Dobuzhskaya, A.B., and Murav’ev, E.A., Heat Treatment of Rails and Braces in Water Cooling, Materialy yubileinoi rel’sovoi komissii 2002 g. (2002 Proceedings of the Anniversary Rail Commission), Novokuznetsk: OAO Kuznetskii Metallurgicheskii Kombinat, 2002, pp. 156–157.
Galitsyn, G.A. and Dobuzhskaya, A.B., Determining the Cooling Temperature and Time of Rails in the New Heat Treatment Method, Sovremennye tekhnologii proizvodstva transportnogo metalla: materialy 3-i mezhdunar. konf. Transmet-2007 (Modern Production Technologies for Metal Used in Transportation: Proceedings of Transmet-2007 International Conference), Yekaterinburg: UGTU-UPI, 2008, pp. 119–124.
Snitko, Yu.P., Galyamov, F.Kh., and Nikitin, S.V., Rail Production Abroad, Materialy yubileinoi rel’sovoi komissii 2002 g. (2002 Proceedings of the Anniversary Rail Commission), Novokuznetsk: OAO Kuznetskii Metallurgicheskii Kombinat, 2002, pp. 10–30.
Binzeisler, N., Schmedders, H., and Wick, K., Moderne Schienerzeugung bei der Thyssen Stahl AG, Thyssen Techn. Ber., 1988, no. 1, pp. 147–159.
Burke, T.E., George, B., and St. John, B.E., An Off-Line Induction Heat Treatment System Produces Quality DHH Railroad Rails, Industr. Heating, 1992, no. 10, pp. 21–23.
Perrin, J.L. and Treuil, J.L., Optimization of Residual Stresses in High Strength Rails at Sogerail, Hayange, Thirty-Ninth MSWP Conference Proceedings, JSS, 1998, vol. XXV, pp. 1061–1070.
Dobuzhskaya, A.B., Galitsyn, G.A., Matveev, V.V., and Belokurova, E.V., Influence of Structure on the Resistance of Rails to Contact-Fatigue Defects, Sovremennye tekhnologii proizvodstva transportnogo metalla: materialy 3-i mezhdunar konf. Transmet-2007 (Modern Production Technologies for Metal Used in Transportation: Proceedings of Transmet-2007 International Conference), Yekaterinburg: UGTU-UPI, 2008, pp. 114–118.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Stakanchikov, G.A. Galitsyn, A.B. Dobuzhskaya, E.V. Belokurova, V.V. Matveev, 2010, published in “Stal’,” 2010, No. 5, pp. 122–126.
About this article
Cite this article
Stakanchikov, V.V., Galitsyn, G.A., Dobuzhskaya, A.B. et al. Development of new heat-treatment methods for rail at OAO Nizhnetagil’skii Metallurgicheskii Kombinat. Steel Transl. 40, 501–506 (2010). https://doi.org/10.3103/S0967091210050207
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210050207