Abstract
A computational and experimental thermophysical method has been developed for studying the operation of industrial furnaces. The method involves measurement of the metal’s surface temperature, mathematical models for calculating the heat transfer, and methods of determining rational heating conditions. The method is intended to minimize the labor required; at furnaces equipped with modern information systems, only a single researcher is needed.
Similar content being viewed by others
References
Denisov, M.A., Soft-Contact Method and Instruments for Measuring the Surface Temperature of Solids, Izmerit. Tekhn., 2003, no. 1, pp. 40–43.
Bulgak, L.I., Vol’fman, I.B., Efroimovich, S.Yu., et al., Avtomatizatsiya metodicheskikh pechei (Automation of Continuous Furnaces), Moscow: Metallurgiya, 1981.
Charikhov, L.A., Ostrovskii, L.A., Klimovitskii, M.D., and Vol’fman, I.B., Avtomatizatsiya metallurgicheskogo prozvodstva: temat. ortrasl. sb. No. 3 MChM SSSR (Automation of Metallurgical Production: Thematic Collection 3 of the Ministry of Ferrous Metallurgy of the USSR), Moscow: Metallurgiya, 1974, p. 129.
Gerashchenko, O.A., Gordov, A.N., Eremina, A.K., et al., Temperaturnye izmereniya. Spravochnnik: Institut problem energosberezheniya AN UkrSSR (Temperature Measurements: A Handbook from the Institute of Energy Conservation, Academy of Sciences of the Ukrainian SSR), Kiev: Naukova Dumka, 1989.
Denisov, M.A., Shklyar, F.R., and Mikhalev, G.A., Mathematical Model for the Calculation of Metal Heating in Stepping-Hearth Furnaces. Part 1, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1980, no. 10, pp. 96–99.
Denisov, M.A., Mikhalev, G.A., Shklyar, F.R., and Kuzovnikov, A.A., Mathematical Model for the Calculation of Metal Heating in Stepping-Hearth Furnaces. Part 2, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1980, no. 12, pp. 97–101.
Hausen, H., Heat Transfer in Counterflow, Parallel Flow, and Crossflow, New York: McGraw-Hill, 1983.
Denisov, M.A., Emchenko, V.S., Mikhalev, G.A., et al., Improving the Thermal Operation and Design of Stepping-Hearth Furnaces, Stal’, 1988, no. 2, pp. 98–102.
Author information
Authors and Affiliations
Additional information
Original Russian Text © M.A. Denisov, K.G. Solov’ev, 2010, published in “Stal’,” 2010, No. 2, pp. 90–95.
About this article
Cite this article
Denisov, M.A., Solov’ev, K.G. Selection of the best metal-heating conditions. Steel Transl. 40, 195–200 (2010). https://doi.org/10.3103/S0967091210020233
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210020233