Abstract
Catalysis is the essential technology for chemical transformation, including production of fuels from the fossil resources petroleum, natural gas, and coal. Typical catalysts for these conversions are robust porous solids incorporating metals, metal oxides, and/or metal sulfides. As efforts are stepping up to replace fossil fuels with biomass, new catalysts for the conversion of the components of biomass will be needed. Although the catalysts for biomass conversion might be substantially different from those used in the conversion of fossil feedstocks, the latter catalysts are a starting point in today’s research. Major challenges lie ahead in the discovery of efficient biomass conversion catalysts, as well as in the discovery of catalysts for conversion of CO2 and possibly water into liquid fuels.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. Ertl, H. Knözinger, J. Weitkamp, F. Schüth, Eds., Handbook of Heterogeneous Catalysis (Wiley-VCH, Weinheim, Germany, ed. 2, 2008).
This section is based in part on B.C. Gates, Catalytic Chemistry (Wiley, New York, 1992).
D. Kalakkad, S.L. Anderson, A.D. Logan, J. Pena, E.J. Braunschweig, C.H.F. Peden, A.K. Datye, J. Phys. Chem. 97, 1437 (1993).
Q. Xu, K.C.C. Kharas, A.K. Datye, Stud. Surf. Sci. Catal. 139, 157 (2001).
This section is based in part on J.G. Speight, The Chemistry and Technology of Petroleum, 4th Edition (CRC Press, New York, 2006).
G.A. Olah, A. Goeppert, G.K. Surya Prakash, Beyond Oil and Gas: The Methanol Economy (Wiley-VCH, Weinheim, Germany, 2006).
R.D. Perlack, L.L. Wright, A.F. Turhollow, R.L. Graham, B.J. Stokes, D.C. Ehrbach, “Biomass as Feedstocks for a Bioenergy and Bioproducts Industry: The Technical Feasibility of a Billion-Ton Annual Supply” (U.S. Department of Energy and U.S. Department of Agriculture, Washington, DC, April 2005; http://feedstockreview.ornl.gov/pdf/billion_ton_vision.pdf) (accessed January 2008).
This section is based on G.W. Huber, J.A. Dumesic, Catal. Today 111, 119 (2006).
This section and the next are based in part on G.W. Huber, S. Iborra, A. Corma, Chem. Rev. 106, 4044 (2006).
J.R. Salge, B.J. Dreyer, P.J. Dauenhauer, L.D. Schmidt, Science 314, 801 (2006).
P.J. Dauenhauer, B.J. Dreyer, N.J. Degenstein, L.D. Schmidt, Angew. Chem., Int. Ed. 46, 5864 (2007).
A. de Klerk, R.J.J. Nel, R. Schwarzer, Ind. Eng. Chem. Res. 46, 2377 (2007).
A. de Klerk, Energy Fuels 21, 625 (2007).
R.R. Soares, D.A. Simonetti, J.A. Dumesic, Angew. Chem., Int. Ed. 45, 3982 (2006).
J.N. Chheda, J.A. Dumesic, Catal. Today 123, 59 (2007).
Y. Roman-Leshkov, C.J. Barrett, Z.Y. Liu, J.A. Dumesic, Nature 447, 982 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gates, B.C., Huber, G.W., Marshall, C.L. et al. Catalysts for Emerging Energy Applications. MRS Bulletin 33, 429–435 (2008). https://doi.org/10.1557/mrs2008.85
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs2008.85