Abstract
The following article was contributed by Anthony G. Evans (Princeton Materials nstitute), recipient of the MRS David Turnbull Lecturer Award at the 2000 MRS Fall Meeting in Boston on November 29, 2000. Evans was cited for “outstanding contributions and leadership in bringing fundamental insights in mechanical behavior to materials engineering through research, teaching, mentoring, writing, and lecturing.”
Similar content being viewed by others
References
M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley, Metal Foams: A Design Guide (Butterworth-Heinemann, Boston, 2000).
M.F. Ashby, Materials Selection and Mechanical Design, 2nd ed. (Butterworth-Heinemann, Oxford, 1999).
J.P. Clark, R. Roth and F.R. Field, in ASM Handbook Volume 20: Materials Science and Design, edited by G.E. Dieter (ASM International, Materials Park, OH, 1997).
M.F. Ashby, Acta Mater. 48 (1) (2000) p. 359.
H.G. Allen, Analysis and Design of Structural Sandwich Panels (Pergamon Press, Oxford, 1969).
B.L. Agarwal and L.H. Sobel, AIAA J. 14 (1977) p.1000.
W.T. Koiter, Koninkl. Nederl. Akademie van Wetenschappen—Amsterdam, Ser. B, 66 (1963) p.265.
J.W. Hutchinson, Adv. Appl. Mech. 14 (1974) p.67.
B. Budiansky and J.W. Hutchinson, in Contributions to the Theory of Aircraft Structures (Delft University Press, Delft, The Netherlands, 1972) p.239.
B. Budiansky Int. J. Solids Struc. 36 (1999) p.3677.
E.J. Catchpole, J. R. Aeronaut. Soc. 58 (1954) p.765.
D.J. Farrar, J. R. Aeronaut. Soc. 53 (1949) p.1041.
G. Gerard Minimum Weight Analysis of Compression Structures (New York University Press, New York, 1956).
V. Tvergaard Int. J.Solids Struc. 9 (1973) p.177.
P.M. Weaver and M.F. Ashby, Prog. Mater. Sci. 41 (1997) p.61.
J.G. Parkhouse, in Proc. 3rd Int. Conf. on Space Structures, edited by H. Nooschin (Elsevier, London, 1984) p.367.
P.M. Weaver and M.F. Ashby, J.Eng. Design 7 (1996) p.129.
N. Wicks and J.W. Hutchinson, Int. J. Solid. Struc. 38 (2001) p.5165.
A.G. Evans, J.W. Hutchinson, N.A. Fleck, M.F. Ashby, and H.N.G. Wadley, Prog. Mater. Sci. 46 (2001) p.309.
V.S. Deshpande and N.A. Fleck, J. Mech. Phys. Solids 48 (6)(2000) p.1253.
R.B. Fuller, U.S. Patent No.2,986, 241 (1961).
A.G. Evans, J.W. Hutchinson, and M.F. Ashby, Prog. Mater. Sci. 43 (1999) p.171.
S. Chiras D.R. Mumm, A.G. Evans, N. Wicks J.W. Hutchinson, K. Dharmasena H.N.G. Wadley, and S. Fichter Int. J.Solids Struc. in press.
D.J. Sypeck and H.N.G. Wadley, J. Mater. Res. 16 (2001) p.890.
J.C. Wallach and L.G. Gibson, Int. J. Solids Struc. submitted for publication.
Bart-H. Smith, J.W. Hutchinson, and A.G. Evans, Int. J.Mech. Sci. 43 (2001) p.1045.
L.J. Gibson and M.F. Ashby, Cellular Solids: Structure and Properties, 2nd ed. (Cambridge University Press, Cambridge, 1997).
S. Hyun and S. Torquato J. Mater Res. 16 (2001) p.280.
D.R. Mumm, S. Chiras A.G. Evans, J.W. Hutchinson, D.J. Sypeck, and H.N.G. Wadley, Acta Mater. to be published.
N.A. Fleck (personal communication).
H.N.G. Wadley and D.J. Sypeck (personal communication).
J.W. Hutchinson and M.Y. He, Int. J. Solids Struc. 37 (2000) p. 6777.
Rights and permissions
About this article
Cite this article
Evans, A.G. Lightweight Materials and Structures. MRS Bulletin 26, 790–797 (2001). https://doi.org/10.1557/mrs2001.206
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs2001.206