Abstract
By using homogeneous electron-beam (EB) irradiation, rapid adhesion between nylon-6 film and polymethyl methacrylate (PMMA) was successfully developed. Effects of homogeneous irradiation of electron beam with low potential (HIEBL) on adhesive strength of different polymers without glue were investigated. HIEBL less than 0.216MJ kg-1 (MGy) increased the adhesive strength and its strain of composites constructed with nylon-6 film and PMMA, although additional HIEBL at more than 0.432 MGy apparently decreased the adhesive strain. HIEBL less than 0.432 MGy also enhanced the elasticity (ds/de)o of composites. To evaluate the influence of HIEBL on the adhesive strength, electron spin resonance signals that relate to dangling bonds were observed. Because EB irradiation generated dangling bonds in polymethyl methacrylate and nylon-6, dangling bonds probably acted reactive and bonding sites to each polymer at interface. Therefore, HIEBL enhanced the adhesive strength as well as elasticity of the composites.
Similar content being viewed by others
References
M. Kobayashi: Bonding of plastics. Heat seal processing. Plastics 41, 84 (1990).
T. Nakayasu and Y. Ohhashi: Cyanoacrylate adhesive. Technology on Adhesion & Sealing 46, 451 (2002).
K. Oguri, K. Fujita, M. Takahashi, Y. Omori, A. Tonegawa, N. Honda, M. Ochi, K. Takayama, and Y. Nishi: Effect of electron beam irradiation on time to clear vision of misted dental mirror glass. J. Mater. Res. 13, 3368 (1998).
K. Oguri, N. Iwataka, A. Tonegawa, Y. Hirose, K. Takayama, and Y. Nishi: Misting-free diamond surface created by sheet electron beam irradiation. J. Mater. Res. 16, 553 (2001).
Y. Nishi and K. Oguri: Electron beam processed silica glass with multi-property. Mater. Trans. 45, 1903 (2004).
R. Suenaga, M. Kanda, N. Hironaka, K. Iwata, A. Tonegawa, and Y. Nishi: Influence of sheet electron beam irradiation with low potential on water absorption in nylon6. J. Jpn. Inst. Met. 72, 35 (2008).
T. Shimaru: Theory of adhesion. Technology on Adhesion & Sealing 3, 121 (1959).
H. Sato, Y. Inoue, K. Iwata, A. Tonegawa, and Y. Nishi: Influence of electron beam irradiation on impact value of acryl resin. J. Jpn. Inst. Met. 72, 520 (2008).
A. Kasashima, N. Iwataka, J. Kawano, N. Honda, and Y. Nishi: Sterilization process by sheet electron beam irradiation for medical glass. J. Adv. Sci. 9, 70 (1997).
S. Kinoshita: The use of UV light for total or partial sterilization. J. Illum. Engi. Inst. Jpn. 91, 210 (2007).
R. Christenhusz and L. Reimer: Film thickness dependence of the heat generation by electron beam irradiation in the energy range between 9 and 100 ke V. Z. Angew. Phys. 23, 396 (1967).
W.F. Libby: Measurement of radioactive tracers. Anal. Chem. 19, 2 (1947).
N. Tsoulfanidis: Measurement and Detection of Radiation (Houshasen Keisoku no riron to ensyu, Gendai Kougakusha, Tokyo, 1983), p. 543.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nishi, Y., Sato, H., Takei, H. et al. Effects of homogeneous irradiation of electron beam with low potential on adhesive strength of polymethyl methacrylate composite sheet covered with nylon-6 film. Journal of Materials Research 24, 3503–3509 (2009). https://doi.org/10.1557/jmr.2009.0429
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2009.0429