Abstract
Background
The tooth morphology course is an important basic dental course. However, it is difficult to fully reflect the three-dimensional (3D) morphological characteristics of tooth structure in two-dimensional pictures in traditional textbooks. The aim of this study was to assess the effect of 3D-printed plastic model teeth in the teaching of tooth morphology.
Methods
Twenty-two undergraduate students who matriculated at the School of Stomatology, the Fourth Medical University, in 2014 and 23 who matriculated in 2016 participated in the study. Each student who matriculated in 2016 was given a full set of fourteen standard 3D-printed plastic model teeth for use during the learning process, and an anonymous questionnaire was used to evaluate the usefulness of the 3D-printed plastic model teeth from the perspective of the students.
Results
There was no significant difference between the two groups in the scores of the theoretical examination or the total score. However, for the score of the sculpted gypsum teeth, the students who used the 3D-printed plastic model teeth in their studies scored significantly higher (P = 0.002). More than 90% of the students thought that the 3D-printed plastic model teeth were of great help or were very helpful for mastering the anatomy of teeth and for carving the gypsum teeth.
Conclusion
Standard 3D-printed plastic teeth can effectively assist students in learning tooth morphology by transforming two-dimensional pictures and descriptions in the textbook into a 3D conformation, effectively promoting students’ learning and mastery of tooth morphology and structure. Additionally, the results suggest that 3D-printed plastic model teeth are of great help to the students in mastering and improving their carving skills.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
The tooth morphology course is an important basic stomatology course that mainly covers the composition, classification and anatomical features of a single tooth [1]. To master tooth morphology, students need to actually carve gypsum or wax to deepen their understanding of the characteristic shape of each tooth, establish a 3D concept of teeth, and improve their carving skills for future clinical courses (such as dental prosthetics and cariology/endodontics) and clinical work [2]. Therefore, the teaching of tooth morphology has always been an important but difficult aspect of the teaching of dentistry. A large number of new designs and methods for teaching tooth morphology have been widely used in various stomatological schools [2,3,4,5]. However, it is difficult to fully reflect the 3D morphological characteristics of tooth structure in two-dimensional pictures in traditional textbooks.
3D printing is a rapid prototyping technology that is based on digital model files and uses powdery adhesive materials to construct 3D objects through layer-by-layer printing. 3D printing is implemented by a digital printer and is widely used in industrial design, architecture, engineering and construction, automotive design, aerospace engineering and other fields. In dentistry, 3D printing has also been introduced in surgical planning [6, 7] and the production of bone implants [8]. This study compared the application effect of 3D-printing technology in the teaching of tooth morphology by using 3D-printed plastic model teeth that matched the traditional tooth morphology textbooks and conducted a questionnaire survey of the students’ feelings about the use of the 3D-printed plastic model teeth.
Methods
The study was approved by the Institutional Review Board (IRB) at the Fourth Military Medical University ZL201425.
Tooth morphology teaching process
At the Fourth Military Medical University, dentistry professional undergraduates take courses on tooth morphology in their second year. The “Dental Gypsum Sculpture Training Course”, published by People’s Medical Publishing House in 2008, is used as teaching material. The courses are composed of 70 credit hours, including seven credit hours of theory on a pandect of tooth morphology and the anatomical features of incisors, canines, premolars and molars. During the 61 credit hours of gypsum dental carving practice, central incisors, lateral incisors, canines, first premolars, second premolars, first molars and second molars of the right maxilla and mandible are carved, with 3–6 credit hours allotted for each tooth. The theoretical examination is worth two credit hours.
In the online classroom at our school, the chapter on tooth morphology in the online course “Oral Anatomy and Physiology”, which was developed by our teaching and research office, is used for instruction. In the class, the teacher first explains the main morphological characteristics of each tooth to the students in approximately 1 h by using a combination of multi-media materials available in the online course. Then, the students work independently to learn according to their own mastery of the relevant knowledge. They can choose their own learning methods from text descriptions, dental pictures, videos, dental animations and other materials. During this process, the teachers are responsible for answering questions. Before the end of the class, the teacher takes 10 to 15 min to summarize the main points of the morphology of each tooth.
In the class on gypsum dental carving practice, the teacher first spends approximately 5 min reviewing the main morphological characteristics and details that need attention in carving. Another 30 min are used for instruction on gypsum tooth carving or watching videos of tooth carving. Then, the students carve a tooth according to the teacher’s instructions and the step carving methods in the textbook while the teacher moves around the classroom and answers questions.
Tooth morphology examination process
Theoretical assessment is carried out by means of a closed-book written examination. The main assessment content is the anatomical morphological characteristics of each tooth and the morphological comparison between different teeth. The question types vary, with 30% being multiple choice questions, 20% being noun interpretation (explanation or description of a given word or glossary term), and 50% being short-answer questions. The full score of the theoretical assessment is 100, accounting for 50% of the total score of the course.
After the theoretical assessment, students are required to hand in a set of sculpted gypsum teeth. The score is based on the accuracy of the shape and the precision of the detail carving in the gypsum teeth. The score of each tooth is as follows: 6 points for each maxillary central incisor/lateral incisor/canine and mandibular central incisor/lateral incisor/cusp (shape: 4 points, details: 2 points); 7 points for each maxillary first premolar/second premolar and mandibular first premolar/second premolar (shape: 5 points, details: 2 points); and 9 points for each maxillary first/second molar and mandibular first/second molar (shape: 6 points, details: 3 points).
Research object and method
Twenty-two undergraduate students who matriculated in 2014 and 23 students who matriculated in 2016 at the School of Stomatology, the Fourth Medical University, participated in the study. All students were engaged with the above teaching and assessment methods.
The two groups of students had the same teachers in the theoretical course and the same teachers in the practical course on gypsum tooth carving (the teachers were recording videos of gypsum tooth carving for a national textbook titled “Dental Gypsum Sculpture Training Course”). The theoretical examination questions were set by the same teacher for both groups (the proportion of the different types of questions was the same, and the overall difficulty was basically the same). The gypsum tooth carvings were assessed by two teachers independently. The average score of each tooth with a score difference of less than 2 points was taken as the score of that tooth. If the score difference was more than 2 points, a third teacher independently scored the tooth again, and the average of the two scores with the most similar values was taken as the score of the tooth.
Before the beginning of this course, each student who matriculated in 2016 was given a set of 3D-printed plastic model teeth. At the end of the course, the students were given an anonymous questionnaire to investigate the usefulness of the 3D-printed plastic model teeth in the course.
Preparation of the 3D-printed plastic model teeth
Before the course, the teacher carved a full set of 14 standard gypsum teeth as models and used the models in a model scanner (3shape) to obtain the data for the tooth printing. 3D printers (Shaanxi hengtong R200) using PLA plastic were used to print the plastic model teeth according to the data information from the model.
Statistics
SPSS Software for Windows version 24.0 was used for statistical analysis of the data. The scores of the two groups of students in the theoretical assessment and gypsum tooth carving and the total scores were in line with the normal distribution and homogeneity of variance. The scores of the two groups of students in the theoretical assessment and gypsum tooth carving as well as the total scores were tested by a t test, and P < 0.05 was considered statistically significant.
Results
Comparison of scores between the two groups of students
Between the two groups of students, there was no significant difference in the theoretical examination scores and the total score. However, for the scores of the sculpted gypsum teeth, the students who matriculated in 2016 who used the 3D-printed plastic model teeth in their class scored significantly higher than those who did not use the model teeth. (Table 1).
Survey results of students who matriculated in 2016
In this survey, only 13.04% of the students thought that the traditional two-dimensional pictures in the textbook clearly expressed dental morphological features. Only 39.13% of the students could identify the correct locations and names of the anatomical structures in the two-dimensional picture, and 65.22% of the students could not completely match the pictures with the corresponding text description in the textbook. These findings suggest that there are still many defects and deficiencies in traditional textbooks regarding 3D structures, such as the anatomy of tooth morphology.
A total of 91.37% of the students thought that the use of the 3D teaching aids and video animation in tooth morphology was more helpful; 95.65 and 91.37% of the students thought that the 3D-printed plastic model teeth were of great help or were very helpful, respectively, for mastering the anatomy of teeth and for carving the gypsum teeth. The students believed that the main advantage of the 3D-printed plastic model teeth was that the anatomical morphology and characteristics of the teeth were clear. Compared with the two-dimensional pictures in the textbook, the 3D-printed plastic model teeth could be used as direct examples when carving, which facilitated the direct comparison between different teeth. (Table 2).
Discussion
Dentistry is a subject with strong practical components, and the cultivation of students’ practical abilities is incorporated into the whole teaching process [9, 10]. According to a survey, 98.63% of dental students in China had not been exposed to relevant knowledge of tooth morphology before their sophomore year, and 82.19% of dental students had not received hands-on training on the same subject [11]. In contrast, in the United States, Japan, Europe and other developed countries, dental courses such as clinical probation and tooth carving are arranged towards the beginning of the curriculum, soon after entrance into the school, so that students can have access to dental knowledge and relevant skills as early as possible [12,13,14,15,16].
In 2001, our university was the first in China to start offering “tooth morphology” as an extension course for second-year dental students. This offering mainly improved the students’ practical ability through the carving of gypsum teeth, and the course simultaneously gave students a basic grasp of the anatomy of teeth, thus laying a solid foundation for later relevant professional courses and clinical work [17]. Previous teaching experience suggests that by the time a student completes 70 credit hours on tooth morphology, the student’s manipulative ability will have greatly improved, and he or she will have a degree of mastery over the anatomical features of the teeth. However, when limited by traditional teaching materials, including the limitations of two-dimensional pictures, students find it difficult to form 3D tooth structural configurations in their minds. A previous questionnaire also indicated the following major problems: (1) Students could not mentally convert the two-dimensional pictures of teeth in the textbook into 3D tooth forms. When carving gypsum teeth, they could not score well because their overall understanding of the teeth was poor. (2) Depending on the teacher and the availability of physical samples after class when practising carving, it was difficult to complete the tooth carving independently. (3) Due to the poor quality of the printed pictures in the textbook and the interference of light and shadow in the pictures, the dental structural details in the pictures were insufficient, and it was difficult for students to master the morphological characteristics of teeth when carving.
Aware of the above problems, our teaching and research section has been carrying out teaching reform in tooth morphology for a long time, including introducing 3D animated demonstrations of teeth into the learning process, increasing the number of contact hours during the carving of the details of gypsum sculptures and giving students highly precise images of teeth as examples [11, 17]. However, it is still difficult to solve the abovementioned three major problems. The emergence of 3D-printing technology has provided new methods for solving these problems in the learning process. After the model scanner and 3D printer were installed in our teaching and research office, we began to explore the possibility of 3D printing in teaching tooth morphology. Our teaching and research section is tasked with compiling a unit for the national textbook titled “Dental Gypsum Sculpture Training Course”. The pictures in the textbook and the videos of the tooth-carving process were created by senior faculty in the teaching and research section who had long-term experience in teaching tooth morphology. Using 3D-printing technology to print completely standard teeth in accordance with the pictures and videos used in national textbooks is of mutual advantage for our teaching and research sections.
After applying the standard 3D-printed plastic model teeth in the daily instruction on tooth morphology for students who matriculated in 2016, we found the following: (1) When taught the theoretical and morphological characteristics of teeth, the students all consciously held the standard 3D-printed plastic model tooth in their hands and compared it with the pictures, textbook and teaching materials. (2) In the practical training in gypsum tooth carving, the students all used the standard 3D-printed plastic model teeth as carving references and regularly compared the gypsum teeth they carved with the 3D-printed plastic model teeth during each step of the carving process to adjust their carving appropriately. Thus, the 3D-printed plastic model teeth can effectively assist students in learning tooth morphology by transforming the two-dimensional pictures and descriptions in the textbook into 3D conformations, effectively promoting students’ learning and mastery of tooth morphology and structure. Compared with the scores of the students who matriculated in 2014, the average dental gypsum sculpture score improved significantly (by 4.39 points) for the students who matriculated in 2016 after the 3D-printed plastic model teeth were added to the learning process. In particular, the quality of the carved teeth details improved significantly, with a more suitable ratio of dental crown and root, more accurate position of cusps and ridges, more precise area and depth of fossa, smoother dental cervical line and clearer grooves and pits in occlusal surfaces. The study showed that the 3D-printed plastic model teeth were also of great help for the students in mastering and improving their carving skills. In addition, the 3D-printed plastic model teeth could effectively overcome the past weaknesses of tooth morphology instruction. The students were able to use the intuitive 3D structure and clear details of the teeth as a reference for equal proportions when carving. It was also easy to directly compare the characteristics of different teeth, which was widely accepted and welcomed by the students.
It has been less than 20 years since tooth morphology was established as an independent course in China. Only a few colleges and universities have set up this course independently, and most of them adopt traditional teaching methods. Until now, no paper in English on the teaching and research of tooth morphology in China has been published in journals, but there are many foreign papers on the teaching and research of tooth morphology that provide good comparisons. Nance et al. [18] assessed the use of an instructional DVD on tooth carving compared to traditional laboratory instruction. The students positively assessed the use of the DVD as a teaching resource, but their carving ability did not improve. Kwon et al. [19] compared the feedback of two digital evaluation systems for assessing the carving projects of students with traditional teaching technologies and found no improvement in the carving performance of students. We used only video, pictures and other visual materials in the early teaching, similar to other studies [4, 20, 21]. However, due to the lack of a basic grasp of tooth morphology, it is difficult for beginner students to apply these materials to improve their tooth-carving skills. A technique in which the tooth was carved step-by-step alongside the professor was found to improve the quality of students’ carving in another study [22]. Therefore, in the later teaching, we mainly added a carving demonstration by the teacher and gave the students step-by-step instruction and guidance in tooth carving. However, due to the class period and the number of teachers, the students’ carving ability was only slightly improved. The 3D-printed plastic model teeth can make up for the above deficiencies. They can be used as an effective reference and at the same time allow students to practice carving freely in their spare time to improve their carving ability. In addition to acting as a teaching method, this approach improved the students’ self-directed learning and self-assessment. Previous studies have claimed that the main advantages of digital resources include unrestricted access to information regardless of place and time, thus allowing flexible study time [23, 24].
Interestingly, the average score of dental gypsum sculpture improved significantly (by 4.39 points) for students who matriculated in 2016, but the mean theoretical assessment score was no different than that for students who matriculated in 2014. Similar to our results, Alzahrani et al. [25] revealed that dental carving scores were higher for students of the experimental group taught by new methods, but the mean theoretical knowledge scores did not improve significantly compared with those for the traditional lecture group. It might be that in contrast to the test of carving skill, the test of theoretical knowledge examines students’ memorized information about tooth morphology, which is not based on carving ability.
In addition, some other teaching methods that do not focus on carving skill have also promoted mastery of dental carving. Chutinan et al. [26] implemented a flipped classroom teaching model involving a self-study period before each class, in-class activities, and discussion sessions and compared it to the previous existing model. The carving score of the traditional lecture group was significantly lower than that of the flipped classroom group. Obrez et al. [27] compared a revised dental anatomy module focusing on a review of content before class, small-group discussions of clinically relevant dental anatomy topics, and more clinically realistic exercises in the laboratory with the module before the revision (control group). The carving examination generated significantly higher scores in the experimental group than in the control group. In the above two studies, a variety of educational resources were explored in student-driven approaches. The authors used books, atlases, manuals, CD-ROMs, and video lectures as pre-class resources to produce significant improvement in students’ dental carving ability. The above data suggest that the combination of a flipped classroom and other teaching methods with standard 3D-printed teeth may further improve students’ mastery and carving skills, which is worth further experimental research in the future.
In the process of teaching tooth morphology at other colleges and universities in China, commercially produced model teeth have been used as a means of teaching exploration [28, 29]. However, the commercial model teeth have several major problems: (1) The size of the model teeth does not match the size of the gypsum blocks the students use in their carving. The commercial models are too large or too small, and it is therefore difficult to use them as an equal-scale reference when carving. (2) The production data used to create the commercial model teeth are derived mainly from tooth morphology measurements in foreign countries, which differ from the average data of adult tooth measurements in China that are used in the national textbooks, resulting in morphological differences between the commercial model teeth and the picture examples in the textbooks. (3) The price of the commercial model teeth is relatively high, usually more than ¥300 (approximately $45 or €38), which creates an economic burden for both the students and the teaching management departments. The above three problems can all be solved with our 3D-printed plastic model teeth.
We have carried out only a preliminary exploration of 3D-printed plastic model teeth in the teaching of tooth morphology. The number of students using 3D-printed plastic model teeth is still lower than the number of those using more traditional methods. The current teaching methods and content need systematic improvement and are not yet completely compatible with the characteristics of the 3D-printed plastic model teeth used in the tooth morphology course. Teachers need additional experience with using 3D-printed plastic model teeth in their teaching process. In the future, it will be necessary to develop more explicit requirements for the use of 3D-printed plastic model teeth in the teaching of tooth morphology, and the teaching level and quality must be substantially improved through continuous improvements in practice.
Conclusion
In this study, the score of sculpted gypsum teeth was higher for the students who used 3D-printed plastic model teeth. More than 90% of the students thought that the 3D-printed plastic model teeth were of great help or were very helpful in mastering the anatomy of teeth and in carving the gypsum teeth. 3D-printed plastic model teeth can effectively assist students in learning tooth morphology by transforming the two-dimensional pictures and descriptions in the textbook into 3D conformations, effectively promoting students’ learning and mastery of tooth morphology and structure as well as being of great help to the students in mastering and improving their carving skills.
Availability of data and materials
All data will become available if requested.
References
Kellesarian SV. Flipping the dental anatomy classroom. Dent J (Basel). 2018;6:23.
Abu Eid R, Ewan K, Foley J, Oweis Y, Jayasinghe J. Self-directed study and carving tooth models for learning tooth morphology: perceptions of students at the University of Aberdeen, Scotland. J Dent Educ. 2013;77:1147–53.
Risnes S, Khan Q, Hadler-Olsen E, Sehic A. Tooth identification puzzle: a method of teaching and learning tooth morphology. Eur J Dent Educ. 2019;23:62–7.
Lone M, McKenna JP, Cryan JF, Downer EJ, Toulouse A. A survey of tooth morphology teaching methods employed in the United Kingdom and Ireland. Eur J Dent Educ. 2018;22:e438–43.
Kirkup ML, Adams BN, Reifeis PE, Heselbarth JL, Willis LH. Is a picture worth a thousand words? effectiveness of ipad technology in preclinical dental laboratory courses. J Dent Educ. 2019;83:398–406.
Aldaadaa A, Owji N, Knowles J. Three-dimensional printing in maxillofacial surgery: hype versus reality. J Tissue Eng. 2018;9:2041731418770909.
Prasad TS, Sujatha G, Muruganandhan J, et al. Three-dimensional printing in reconstructive Oral and maxillofacial surgery. J Contemp Dent Pract. 2018;19:1–2.
Tellisi N, Ashammakhi NA, Billi F, Kaarela O. Three dimensional printed bone implants in the clinic. J Craniofac Surg. 2018;29:2363–7.
Al-Asmar AA, Al-Nsour M, Alsoleihat F. Is there a correlation between students’ performance in dental anatomy and performance in operative dentistry? Int J Morphol. 2019;37:93–7.
Crothers AJ, Bagg J, Mckerlie R. The flipped classroom for pre-clinical dental skills teaching - a reflective commentary. Br Dent J. 2017;222:709–13.
Yu SB, Wang MQ, Xing XH, Wang XW, Zhang JH. The investigation of the application of plaster-tooth sculpture-courses and some reflections. Chin J Conserv Dent. 2008;18:56–9.
Miyatake Y, Kazama M, Isoda M, Nejima J. Internal medicine education in dentistry: knowledge required varies according to dental specialty. Eur J Dent Educ. 2004;8:18–23.
Woolfolk MW, Price SS. Dental education: evolving student trends. J Dent Educ. 2012;76:51–64.
Patel US, Tonni I, Gadbury-Amyot C, Van der Vleuten CPM, Escudier M. Assessment in a global context: an international perspective on dental education. Eur J Dent Educ. 2018;22(Suppl 1):21–7.
Field J, Stone S, Orsini C, et al. Curriculum content and assessment of pre-clinical dental skills: a survey of undergraduate dental education in Europe. Eur J Dent Educ. 2018;22:122–7.
Chuenjitwongsa S, Oliver RG, Bullock AD. Developing educators of European undergraduate dental students: towards an agreed curriculum. Eur J Dent Educ. 2018;22:179–91.
Jiao K, Niu LN, Chai ZG. Practice and thinking of the gradually-advanced teaching on tooth anatomy. Chin J Conserv Dent. 2015;25:388–90.
Nance ET, Lanning SK, Gunsolley JC. Dental anatomy carving computer-assisted instruction program: an assessment of student performance and perceptions. J Dent Educ. 2009;73:972–9.
Kwon SR, Hernández M, Blanchette DR, et al. Effect of computer-assisted learning on Students' dental anatomy waxing performance. J Dent Educ. 2015;79:1093–100.
Roy E, Bakr MM, George R. The need for virtual reality simulators in dental education: a review. Saudi Dent J. 2017;29:41–7.
de Azevedo RA, da Rosa WL, da Silva AF, et al. Comparative effectiveness of dental anatomy carving pedagogy: a systematic review. J Dent Educ. 2015;79:914–21.
Kilistoff AJ, Mackenzie L, D’Eon M, et al. Efficacy of a step-by-step carving technique for dental students. J Dent Educ. 2013;77:63–7.
de Azevedo RA, Correa MB, Torriani MA, et al. Optimizing quality of dental carving by preclinical dental students through anatomy theory reinforcement. Anat Sci Educ. 2018;11:377–84.
Bakr MM, Thompson CM, Massadiq M. Anatomical sciences: A foundation for a solid learning experience in dental technology and dental prosthetics. Anat Sci Educ. 2017;10:395–404.
Alzahrani AA, Alhassan EM, Attia MA, et al. Enhancing dental carving skills of preclinical dental hygiene students using online dental anatomy resources. Open Dent J. 2019;13:499–504.
Chutinan S, Riedy CA, Park SE. Student performance in a flipped classroom dental anatomy course. Eur J Dent Educ. 2018;22:e343–9.
Obrez A, Briggs C, Buckman J, et al. Teaching clinically relevant dental anatomy in the dental curriculum: description and assessment of an innovative module. J Dent Educ. 2011;75:797–804.
Huang CJ, Zhang JH, Wang SY. Effect of natural teeth engraving on the improvement of Students' carved teething. Gen J Stomatol. 2016;3:47–9.
Zuo YP, Wang LM, Zhu Y, et al. The significance and measures of strengthening tooth carving skills in oral medicine education. Chin J Med Edu Res. 2014;13:797–801.
Acknowledgments
None are to be done.
Funding
The production cost of 3D-printed plastic teeth used in this work was supported by the National Natural Science Foundation of China grants (81700995).
Author information
Authors and Affiliations
Contributions
HW: conception, data analysis, writing, revising and manuscript approval. HX: data analysis, writing, revising and manuscript approval. JZ: data gathering and analysis, writing, revising and manuscript approval. SY: manuscript revising and approval. MW: manuscript revising and approval. JQ: conception, data gathering and analysis, writing, revising and manuscript approval. MZ: conception, data gathering and analysis, writing, revising, manuscript approval and submission processing. All the authors have read the manuscript and agree in its submission to BMC Medical Education and consent it is done.
Corresponding authors
Ethics declarations
Ethics approval and consent to participate
This study has had an ethics committee approval, by the Institutional Review Board (IRB) at the Fourth Military Medical University ZL201425. All participants signed the informed consent before participating in the program.
Consent for publication
All data were obtained after written informed consent to answer and for data to be analysed and published.
Competing interests
The authors have no conflicts of interest to disclose.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Wang, H., Xu, H., Zhang, J. et al. The effect of 3D-printed plastic teeth on scores in a tooth morphology course in a Chinese university. BMC Med Educ 20, 469 (2020). https://doi.org/10.1186/s12909-020-02390-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12909-020-02390-0