Abstract
Background
The identification of genomic biomarkers is a key step towards improving diagnostic tests and therapies. We present a reference-free method for this task that relies on a k-mer representation of genomes and a machine learning algorithm that produces intelligible models. The method is computationally scalable and well-suited for whole genome sequencing studies.
Results
The method was validated by generating models that predict the antibiotic resistance of C. difficile, M. tuberculosis, P. aeruginosa, and S. pneumoniae for 17 antibiotics. The obtained models are accurate, faithful to the biological pathways targeted by the antibiotics, and they provide insight into the process of resistance acquisition. Moreover, a theoretical analysis of the method revealed tight statistical guarantees on the accuracy of the obtained models, supporting its relevance for genomic biomarker discovery.
Conclusions
Our method allows the generation of accurate and interpretable predictive models of phenotypes, which rely on a small set of genomic variations. The method is not limited to predicting antibiotic resistance in bacteria and is applicable to a variety of organisms and phenotypes. Kover, an efficient implementation of our method, is open-source and should guide biological efforts to understand a plethora of phenotypes (http://github.com/aldro61/kover/).
Similar content being viewed by others
Background
Despite an era of supercomputing and increasingly precise instrumentation, many biological phenomena remain misunderstood. For example, phenomena such as the development of some cancers, or the lack of efficiency of a treatment on an individual, still puzzle researchers. One approach to understanding such events is the elaboration of case-control studies, where a group of individuals that exhibit a given biological state (phenotype) is compared to a group of individuals that do not. In this setting, one seeks biological characteristics (biomarkers), that are predictive of the phenotype. Such biomarkers can serve as the basis for diagnostic tests, or they can guide the development of new therapies and drug treatments by providing insight on the biological processes that underlie a phenotype [1–4]. With the help of computational tools, such studies can be conducted at a much larger scale and produce more significant results.
In this work, we focus on the identification of genomic biomarkers. These include any genomic variation, from single nucleotide substitutions and indels, to large scale genomic rearrangements. With the increasing throughput and decreasing cost of DNA sequencing, it is now possible to search for such biomarkers in the whole genomes of a large set of individuals [2, 5]. This motivates the need for computational tools that can cope with large amounts of genomic data and identify the subtle variations that are biomarkers of a phenotype.
Genomic biomarker discovery relies on multiple genome comparisons. Genomes are typically compared based on a set of single nucleotide polymorphisms (SNP) [2, 6, 7]. A SNP exists at a single base pair location in the genome when a variation occurs within a population. The identification of SNPs relies on multiple sequence alignment, which is computationally expensive and can produce inaccurate results in the presence of large-scale genomic rearrangements, such as gene insertions, deletions, duplications, inversions, or translocations [8–12].
Recently, methods for genome comparison that alleviate the need for multiple sequence alignment, i.e., reference-free genome comparison, have been investigated [8–12]. In this work, we use such an approach, by comparing genomes based on the k-mers, i.e., sequences of k nucleotides, that they contain. The main advantage of this method is that it is robust to genomic rearrangements. Moreover, it provides a fully unbiased way of comparing genomic sequences and identifying variations that are associated with a phenotype. However, this genomic representation is far less compact than a set of SNPs and thus poses additional computational challenges.
In this setting, the objective is to find the most concise set of genomic features (k-mers) that allows for accurate prediction of the phenotype [1]. Including uninformative or redundant features in this set would lead to additional validation costs and could mislead researchers. In this work, we favor an approach based on machine learning, where we seek a computational model of the phenotype that is accurate and sparse, i.e. that relies on the fewest genomic features. Learning such models from large data representations, such as the k-mer representation, is a challenging problem [13]. Indeed, there are many more genomic features than genomes, which increases the danger of overfitting, i.e., learning random noise patterns that lead to poor generalization performance. In addition, the majority of the k-mers are uninformative and cannot be used to predict the phenotype. Finally, due to the structured nature of genomes, many k-mers occur simultaneously and are thus highly correlated.
Previous work in the field of biomarker discovery has generally combined feature selection and predictive modeling methods [1, 14]. Feature selection serves to identify features that are associated with the phenotype. These features are then used to construct a predictive model with the hope that it can accurately predict the phenotype. The most widespread approach consists in measuring the association between the features and the phenotype with a statistical test, such as the χ 2 test or a t-test. Then, some of the most associated features are selected and given to a modeling algorithm. In the machine learning literature, such methods are referred to as filter methods [13, 15].
When considering millions of features, it is not possible to efficiently perform multivariate statistical tests. Hence, filter methods are limited to univariate statistical tests. While univariate filters are highly scalable, they discard multivariate patterns in the data, that is, combinations of features that are, together, predictive of the phenotype. Moreover, the feature selection is performed independently of the modeling, which can lead to a suboptimal choice of features. Embedded methods address these limitations by integrating the feature selection in the learning algorithm [14, 15]. These methods select features based on their ability to compose an accurate predictive model of the phenotype. Moreover, some of these methods, such as the Set Covering Machine [16], can consider multivariate interactions between features.
In this study, we propose to apply the Set Covering Machine (SCM) algorithm to genomic biomarker discovery. We devise extensions to this algorithm that make it well suited for learning from extremely large sets of genomic features. We combine this algorithm with the k-mer representation of genomes, which reveals uncharacteristically sparse models that explicitly highlight the relationship between genomic variations and the phenotype of interest. We present statistical guarantees on the accuracy of the models obtained using this approach. Moreover, we propose an efficient implementation of the method, which can readily scale to large genomic datasets containing thousands of individuals and hundreds of millions of k-mers.
The method was used to model the antibiotic resistance of four common human pathogens, including Gram-negative and Gram-positive bacteria. Antibiotic resistance is a growing public health concern, as many multidrug-resistant bacterial strains are starting to emerge. This compromises our ability to treat common infections, which increases mortality and health care costs [17, 18]. Better computational methodologies to assess resistance phenotypes will assist in tracking epidemics, improve diagnosis, enhance treatment, and facilitate the development of new drugs [19, 20]. This study highlights that, with whole genome sequencing and machine learning algorithms, such as the SCM, we can readily zero in on the genes, mutations, and processes responsible for antibiotic resistance and other phenotypes of interest.
Machine learning for biomarker discovery
The problem of distinguishing two groups of living organisms based on their genomes can be formalized as a supervised learning problem. In this setting, we assume that we are given a data sample \({\mathcal {S}}\) that contains m learning examples. These examples are pairs (x,y), where x is a genome and y is a label that corresponds to one of two possible phenotypes. More specifically, we assume that x∈{A,T,G,C}∗, which corresponds to the set of all possible strings of DNA nucleotides and that y∈{0,1}. In this work, the label y=1 is assigned to the case group and y=0 to the control group. The examples in \({\mathcal {S}}\) are assumed to be drawn independently from an unknown, but fixed, data generating distribution D. Hence \({\mathcal {S}} \overset {\text {\tiny {def}}}{=} \{({\mathbf {x}}_{1}, y_{1}), \ldots, ({\mathbf {x}}_{m}, y_{m})\} \sim D^{m}.\)
Most learning algorithms are designed to learn from a vector representation of the data. Thus, to learn from genomes, we must define a function \({\boldsymbol {\phi }}: \{A, T, G, C\}^{*} \rightarrow \mathbb {R}^{d}\), that takes a genome as input and maps it to some d dimensional vector space (the feature space). We choose to represent each genome by the presence or absence of every possible k-mer. This representation is detailed in the “Methods” section.
Subsequently, a learning algorithm can be applied to the set \(S' \overset {\text {\tiny {def}}}{=} \left \{({\boldsymbol {\phi }}({\mathbf {x}}_{1}), y_{1}), \ldots, ({\boldsymbol {\phi }}({\mathbf {x}}_{m}), y_{m})\right \}\) to obtain a model \(h: \mathbb {R}^{d} \rightarrow \{0, 1\}\). The model is a function that, given the feature representation of a genome, estimates the associated phenotype. The objective is thus to obtain a model h that has a good generalization performance, i.e., that minimizes the probability, R(h), of making a prediction error for any example drawn according to the distribution D, where
Application specific constraints
Biomarker discovery leads to two additional constraints on the model h. These are justified by the cost of applying the model in practice and on the ease of interpretation of the model by domain experts.
First, we strive for a model that is sparse, i.e., that uses a minimal set of features to predict the phenotype. This property is important, as it can greatly reduce the cost of applying the model in practice. For example, if the model relies on a sufficiently small number of features, these can be measured by using alternative methods, e.g., polymerase chain reaction (PCR), rather than sequencing entire genomes.
In addition, the model must be easily interpretable by domain experts. This is essential for extracting useful biological information from the data, to facilitate comprehension, and is critical for adoption by the scientific community. We make two observations in an attempt to obtain a clear definition of interpretability. The first is that the structure of a model can affect its interpretability. For example, rule-based models, such as decision trees [21], are naturally understood as their predictions consist in answering a series of questions; effectively following a path in the tree. In contrast, linear models, such as those obtained with support vector machines [22] or neural networks [23], are complex to interpret, as their predictions consist in computing linear combinations of features. The second observation is that, regardless of the structure of the model, sparsity is an essential component in interpretability, since models with many rules are inevitably more tedious to interpret.
The set covering machine
The SCM [16] is a learning algorithm that uses a greedy approach to produce uncharacteristically sparse rule-based models. In this work, the rules are individual units that detect the presence or the absence of a k-mer in a genome. These rules are boolean-valued, i.e., they can either output true or false. The models learned by the SCM are logical combinations of such rules, which can be conjunctions (logical-AND) or disjunctions (logical-OR). To predict the phenotype associated with a genome, each rule in the model is evaluated and the results are aggregated to obtain the prediction. A conjunction model assigns the positive class (y=1) to a genome if all the rules output true, whereas a disjunction model does the same if at least one rule outputs true.
The time required for learning a model with the SCM grows linearly with the number of genomes in the dataset and with the number of k-mers under consideration. This algorithm is thus particularly well suited for learning from large genomic datasets. Moreover, as it will be discussed later, we have developed an efficient implementation of the SCM, which can easily scale to hundreds of millions of k-mers and thousands of genomes, while requiring a few gigabytes of memory. This is achieved by keeping the data on external storage, e.g., a hard drive, and accessing it in small contiguous blocks. This is in sharp contrast with other learning algorithms, which require that the entire dataset be stored in the computer’s memory.
The SCM algorithm is detailed in Additional file 1: Appendix 1. In the “Methods” section, we propose algorithmic and theoretical extensions to the SCM algorithm that make it a method of choice for genomic biomarker discovery.
Results
Data
Antibiotic resistance datasets were acquired for four bacterial species: Clostridium difficile, Mycobacterium tuberculosis, Pseudomonas aeruginosa, and Streptococcus pneumoniae. Each dataset was a combination of whole genome sequencing reads and antibiotic susceptibility measurements for multiple isolates. The M. tuberculosis, P. aeruginosa, and S. pneumoniae data were respectively obtained from Merker et al. [24], Kos et al. [25] and Croucher et al. [26]. The C. difficile data were obtained from Dr. Loo and Dr. Bourgault. The genomes were submitted to the European Nucleotide Archive [EMBL:PRJEB11776 (http://www.ebi.ac.uk/ena/data/view/PRJEB11776)] and the antibiotic susceptibility measurements are provided in Additional file 2.
The sequencing data, which are detailed in Additional file 3: Table S1, were acquired using a variety of Illumina platforms. The genomes were assembled and subsequently split into k-mers of length 31 (“Methods”). Guidelines for selecting an appropriate k-mer length are provided in “Methods”.
Each (pathogen, antibiotic) combination was considered individually, yielding 17 datasets in which the number of examples (m) ranged from 111 to 556 and the number of k-mers (\(|\mathcal {K}|\)) ranged from 10 to 123 millions. Figure 1 shows the distribution of resistant and sensitive isolates in each dataset. The datasets are further detailed in Additional file 3: Table S2.
The SCM models are sparse and accurate
The models obtained using the SCM were compared to those obtained using other machine learning algorithms based on their generalization performance and sparsity. Comparisons were made with rule-based models: the CART decision tree algorithm [21], linear classifiers: L 1-norm and L 2-norm regularized linear support vector machines (L1SVM, L2SVM) [22], and kernel methods: polynomial and linear kernel support vector machines (PolySVM, LinSVM) [27, 28]. CART and support vector machines are state-of-the-art machine learning algorithms that have been abundantly used in biological applications [29, 30]. Publicly available implementations of these algorithms were used: Scikit-learn [31] for CART, LIBLINEAR [32] for L1SVM and L2SVM, and LIBSVM [33] for PolySVM and LinSVM.
The following protocol was used to compare the algorithms. Each dataset was split into a training set (2/3 of the data) and a separate testing set (1/3). 5-fold cross-validation was performed on the training set to select the best hyperparameter values. Finally, each algorithm was trained on the training set and predictions were computed on the held-out testing set. For each algorithm, the generalization performance was measured by the error rate on the independent testing set and sparsity was measured by the number of k-mers that contributed to the model. This procedure was repeated 10 times, on different partitions of the data, and the algorithms were compared based on the average error rate and sparsity. A Wilcoxon signed-rank test [34] was used to assess the statistical significance of the comparisons.
The algorithms were also compared to a baseline method that predicts the most abundant class in the training set (resistant or sensitive).
Our implementation of the SCM was able to learn from the entire feature space, that is, all the k-mers. The time required for training the algorithm varied between 33 seconds and two hours, depending on the dataset, and the memory requirements were always inferior to eight gigabytes. In contrast, the CART, L1SVM, and L2SVM algorithms were unable to learn from the entire feature space. For these algorithms, the entire dataset had to be stored in the computer’s memory, generating massive memory requirements. Hence, these algorithms were combined with a feature selection step that reduced the size of the feature space.
The next two sections compare the SCM to two categories of methods: those that require feature selection and those that learn from the entire feature space. In both cases, the SCM was found to yield the sparsest and most accurate models.
Feature selection
Feature selection was performed using a univariate filter that measured the association between each feature and the phenotype [1, 14, 15]. Using the χ 2 test of independence, the 1 000 000 most associated features were retained. Results comparing the SCM, which uses all features, to the univariately filtered algorithms: χ 2+CART, χ 2+L1SVM, and χ 2+L2SVM, are shown in Table 1.
In terms of error rate, all the algorithms surpass the baseline method, indicating that relevant information about antibiotic resistance was found in the genomes. The error rate of the SCM is smaller or equal to that of χ 2+CART on 12/17 dataset (p=0.074), χ 2+L1SVM on 11/17 datasets (p=0.179), and χ 2+L2SVM on 16/17 datasets (p=0.001). Moreover, the SCM was found to learn sparser models than these algorithms (χ 2+CART: p=0.003, χ 2+L1SVM: p=0.0003, χ 2+L2SVM: p=0.0003).
In addition, the SCM was compared to a variant which uses univariate feature selection (χ 2+SCM). This comparison revealed that the SCM surpasses the χ 2+SCM in terms of accuracy (p=0.001) and sparsity (p=0.054), highlighting the importance of multivariate patterns in the data (Table 1).
The ability to consider the entire feature space is thus critical and eliminates the selection biases of feature selection methods. However, for most machine learning algorithms, this remains impossible due to computational limitations and the danger of overfitting. The next section compares the SCM to two methods that learn from the entire feature space.
Entire feature space
By means of the kernel trick, kernel methods can efficiently learn from very high dimensional feature spaces [27, 28]. However, as opposed to the SCM, they do not yield sparse models that can be interpreted by domain experts.
The SCM was compared to support vector machines coupled with linear (LinSVM) and polynomial (PolySVM) kernels. When learning from our binary genomic representation (“Methods”), the LinSVM yields a linear model that considers the presence or absence of each k-mer. Moreover, the PolySVM yields a linear model that considers all possible conjunctions of 1 to d k-mers, where d is a hyperparameter of the kernel. The obtained models are thus akin to those of the SCM, making this comparison particularly interesting.
The results, shown in Table 2, indicate that the SCM models are both more accurate (LinSVM: p=0.0003, PolySVM: p=0.0003) and sparser (LinSVM: p=0.001, PolySVM: p=0.006) than those of the aforementioned algorithms. Further analysis revealed that the poor performance of LinSVM and PolySVM is due to overfitting (Additional file 3: Table S3), which likely occurs due to the immensity of the feature space. In contrast, the SCM was not found to overfit. This is consistent with the theoretical result described in “Methods”, which indicates that the SCM is not prone to overfitting in settings where the number of features is much larger than the number of examples.
In summary, it is not only its ability to consider the entire feature space, but also its sparsity and high resistance to overfitting that make for the strong performance of the SCM. In complement to these results, the mean and standard deviation of the sensitivity, specificity, and error rate for each algorithm are provided in Additional file 3: Tables S4, S5, S6.
The SCM models are biologically relevant
The biological relevance of the SCM models was investigated. To achieve this, the algorithm was retrained on each dataset, using all the available data. This yielded a single phenotypic model for each dataset. Then, the k-mer sequences of the rules in the models were annotated by using Nucleotide BLAST [35] to search them against a set of annotated genomes.
Moreover, for each rule in the models, rules that the SCM found to be equally predictive of the phenotype (equivalent rules) were considered in the analysis. Such rules are not used for prediction, but can provide insight on the type of genomic variation that was identified by the algorithm (see “Methods”). For example, a small number of rules targeting k-mers that all overlap on a single or few nucleotides, suggests a point mutation. Alternatively, a large number of rules, that target k-mers which can be assembled to form a long sequence, suggests a large-scale genomic variation, such as a gene insertion or deletion.
The annotated models for each dataset are illustrated in Additional file 4: Figure S1. Below, a subset of these models, which is illustrated in Fig. 2, is discussed. For each genomic variation identified by the algorithm, a thorough literature review was performed, with the objective of finding known, and validated, associations to antibiotic resistance.
Antibiotic resistance models: Six antibiotic resistance models, which are all disjunctions (logical-OR). The rounded rectangles correspond to antibiotics. The circular nodes correspond to k-mer rules. A single border indicates a presence rule and a double border indicates an absence rule. The numbers in the circles show to the number of equivalent rules. A rule is connected to an antibiotic if it was included in its model. The weight of the edges gives the importance of each rule as defined by Eqs. (3) and (4). The models for all 17 datasets are illustrated in Additional file 4: Figure S1
For M. tuberculosis, the isoniazid resistance model contains a single rule which targets the katG gene. This gene encodes the catalase-peroxidase enzyme (KatG), which is responsible for activating isoniazid, a prodrug, into its toxic form. As illustrated in Fig. 3, the k-mers associated with this rule and its equivalent rules all overlap a concise locus of katG, suggesting the occurrence of a point mutation. This locus contains codon 315 of KatG, where mutations S315I, S315G, S315N and S315T are all known to result in resistance [36, 37]. A multiple sequence alignment revealed that these variants were all present in the dataset. The SCM therefore selected a rule that captures the absence of the wild-type sequence at this locus, effectively including the presence of all the observed variants.
Going beyond k-mers: This figure shows the location, on the katG gene, of each k-mer targeted by the isoniazid model (rule and equivalent rules). All the k-mers overlap a concise locus, suggesting that it contains a point mutation that is associated with the phenotype. A multiple sequence alignment revealed a high level of polymorphism at codon 315 (shown in red). The wild-type sequence (WT), as well as the resistance conferring variants S315G, S315I, S315N and S315T, were observed. The rule in the model captures the absence of WT and thus, includes the occurrence of all the observed variants
The rifampicin resistance model contains two rules, which target the rifampicin resistance-determining region (RRDR) of the rpoB gene. This gene, which encodes the β-subunit of the RNA polymerase, is the target of rifampicin. The antibiotic binds to RpoB, which inhibits the elongation of messenger RNA. Mutations in the RRDR are known to cause conformational changes that result in poor binding of the drug and cause resistance [37]. Furthermore, one of the rules has a much greater importance than the other. This suggests the existence of two clusters of rifampicin resistant strains, one being predominant, while both harbor mutations in different regions of the RRDR.
For S. pneumoniae, the first and most important rule of the erythromycin resistance model targets the mel gene. The mel gene is part of the macrolide efflux genetic assembly (MEGA) and is known to confer resistance to erythromycin [38, 39]. Of note, this gene is found on an operon with either the mefA or the mefE gene, which are also part of the MEGA and associated with erythromycin resistance [38]. It is likely that the algorithm targeted the mel gene to obtain a concise model that includes all of these resistance determinants. The second rule in the model is an absence rule that targets the wild-type version of the metE gene. This gene is involved in the synthesis of methionine [40]. Alterations in this gene could lead to a lack of methionine in the cell and impact the ribosomal machinery, which is the drug’s target. However, further validation is required to confirm this resistance determinant.
For C. difficile, the resistance models for azithromycin and clarithromycin, two macrolide antibiotics, share a rule with the resistance model for clindamycin, a lincosamide antibiotic. These three antibiotics function by binding the 50S subunit of the ribosome and interfering with bacterial protein synthesis [41]. Cross-resistance between macrolide and lincosamide antibiotics is caused by the presence of the ermB gene that encodes rRNA adenine N-6-methyltransferase, an enzyme that methylates position 2058 of the 23S rRNA within the larger 50S subunit [41–43]. The shared rule for the macrolide and the lincosamide models rightly targets the ermB gene. This rule has 616 equivalent rules, all of the presence type, targeting ermB. Arguably, the algorithm correctly found the presence of this gene to be a cross-resistance determinant, in agreement with the literature [41–43].
Azithromycin and clarithromycin have similar mechanisms of action and, as expected, their resistance models are identical. They contain a presence rule that targets a region of the Tn6110 transposon, characterized in C. difficile strain QCD-6626 [44]. This region is located 136 base pairs downstream of a 23S rRNA methyltransferase, which is a gene known to be associated with macrolide resistance [45]. The next rule in the models targets the presence of the penicillin-binding protein, which plays a role in resistance to β-lactam antibiotics, such as ceftriaxone [46]. Among the azithromycin-resistant isolates in our dataset, 92.7 % are also resistant to ceftriaxone. Similarly, 92.2 % of the clarithromycin-resistant isolates are resistant to ceftriaxone. Hence, this rule was likely selected due to these strong correlations.
Finally, clindamycin resistance model contains a rule targeting a Tn6194-like conjugative transposon. This transposon contains the ermB gene, which is associated with resistance to this antibiotic [47]. Moreover, it is rarely found in clinical isolates, which could explain its smaller importance.
Spurious correlations can be overcome
One limitation of statistical methods that derive models from data is their inability to distinguish causal variables from those that are highly correlated with them. To our knowledge, it is very difficult to prevent this pitfall. However the interpretability and the sparsity of the obtained models can be leveraged to identify and circumvent spurious correlations.
One notable example of such a situation is the strong correlation in resistance to antibiotics that do not share common mechanisms of action. These correlations might originate from treatment regimens. For instance, Fig. 4 a shows, for M. tuberculosis, the proportion of isolates that are identically labeled (resistant or sensitive) for each pair of antibiotics. More formally, this figure shows a matrix C, where each entry C ij corresponds to a pair of datasets \((\mathcal {S}_{i}\), \(\mathcal {S}_{j})\) and
Overcoming spurious correlations: This figures shows how spurious correlations in the M. tuberculosis data affect the models produced by the Set Covering Machine. a For each M. tuberculosis dataset, the proportion of isolates that are identically labeled in each other dataset is shown. This proportion is calculated using Eq. (2). b The antibiotic resistance models learned by the SCM at each iteration of the correlation removal procedure. Each model is represented by a rounded rectangle identified by the round number and the estimated error rate. All the models are disjunctions (logical-OR). The circular nodes correspond to k-mer rules. A single border indicates a presence rule and a double border indicates an absence rule. The numbers in the circles show to the number of equivalent rules. A rule is connected to an antibiotic if it was included in its model. The weight of the edges gives the importance of each rule
Notice the large proportion of isolates in the streptomycin dataset that are identically labeled in the isoniazid dataset (95.6 %). Consequently, the models obtained for streptomycin and isoniazid resistance are identical (Additional file 4: Figure S1). However, these antibiotics have different mechanisms of action and thus, different resistance mechanisms.
The following procedure is proposed to eliminate spurious correlations and identify causal genomic variants:
-
1.
Learn a model using the SCM.
-
2.
Validate the association between the rules in the model and the phenotype using mutagenesis and phenotypic assays.
-
3.
If a rule is not rightly associated with the phenotype, remove the k-mer s of the rule and its equivalent rules from the data.
-
4.
Repeat until a causal association is found.
In practice, the models can be validated by genetically engineering mutants that match the k-mer variations targeted by the model. Such mutants can be engineered by diverse means, such as homologous recombination, the CRISPR-Cas9 approach [48], or standard molecular biology cloning. For a conjunction, a multilocus mutant can be engineered to test the synergy between the presence/absence of the k-mers. For a disjunction, the rules must be validated individually, by engineering one mutant for each rule in the model. Finally, the phenotypes of the mutants can be experimentally validated using phenotypic assays. For example, antibiotic resistance can be validated by using standard susceptibility testing protocols in the presence of the antibiotic.
Figure 4 b shows a proof of concept, where the iterative procedure was applied to streptomycin resistance. Resistance to this antibiotic is well documented and thus, a literature review was used in lieu of the experimental validation of mutants. Six rounds were required in order to converge to a known resistance mechanism, i.e., the rpsL gene [49]. The models obtained throughout the iterations contained rules targeting the katG and the rpoB genes, which are respectively isoniazid and rifampicin resistance determinants [36, 37]. Again, this occurs due to the large proportion of isolates in the streptomycin dataset that are identically labeled in the isoniazid (95.6 %) and rifampicin datasets (85.9 %).
Hence, should the algorithm identify variations that are correlated with, but not causal of the phenotype, one could detect and eliminate them, eventually converging to causal variants. The search for causality is therefore a feedback between machine learning and experimental biology, which is made possible by the high sparsity and interpretability of the models generated using the SCM.
The SCM can predict the level of resistance
To further demonstrate how the SCM can be used to explore the relationship between genotypes and phenotypes, it was used to predict the level of benzylpenicillin resistance in S. pneumoniae. For this bacterium, penicillin resistance is often mediated by alterations that reduce the affinity of penicillin-binding proteins [50]. Moderate-level resistance is due to alterations in PBP2b and PBP2x, whereas high-level resistance is due to additional alterations in PBP1a. Based on the antibiotic susceptibility data described in Additional file 3: Table S2, three levels of antibiotic resistance were defined and used to group the isolates: high-level resistance (R), moderate-level resistance (I) and sensitive (S). We then attempted to discriminate highly resistant isolates from sensitive isolates and moderately resistant isolates from sensitive isolates. The same protocol as in the previous sections was used.
An error rate of 1.3 % was obtained for discriminating highly resistant and sensitive isolates. The obtained model correctly targeted the pbp1a gene. Based on the protocol presented in Additional file 1: Appendix 2, all the k-mers located in this gene were removed and the experiment was repeated. This yielded a model with an error rate of 1.7 % that targeted the pbp2b gene. These results are consistent with the literature, since they indicate that alterations in both genes are equally predictive of a high-level of resistance and thus, that they occur simultaneously in isolates that are highly resistant to penicillin [50].
An error rate of 6.4 % was obtained for discriminating moderately resistant and sensitive isolates. The obtained model correctly targeted the pbp2b gene. Again, all the k-mers located in this gene were removed and the experiment was repeated. The obtained model had an error rate of 7.2 % and targeted the pbp2x gene. In accordance with the literature, this indicates that alterations in both genes are predictive of moderate-level resistance. However, our results indicate that alterations in pbp2b are slightly more predictive of this phenotype.
Discussion
We have addressed the problem of learning computational phenotyping models from whole genome sequences. We sought a method that produces accurate models that are interpretable by domain experts, while relying on a minimal set of biomarkers. Our results for predicting antibiotic resistance demonstrate that this goal has been achieved.
Biologically relevant insight was acquired for drug resistance phenotypes. Indeed, within hours of computation, we have retrieved antibiotic resistance mechanisms that have been reported over the past decades. Of note, we have shown that the k-mers in the SCM models can be further refined to determine the type of the underlying genomic variations. Hence, this method could be used to rapidly gain insight on the causes of resistance to new antibiotics, for which the mechanism of action might not be fully understood. Furthermore, as our results suggest, our method could be used to discover resistance mechanisms that are shared by multiple antibiotics, which would allow the development of more effective combination therapies.
In terms of accuracy, the method was shown to outperform a variety of machine learning-based biomarker discovery methods. For a majority of datasets, the achieved error rates are well below 10 %. Given the inherent noise in antibiotic susceptibility measurements, it is likely that these error rates are near optimal. For M. tuberculosis and P. aeruginosa, some datasets were shown to have contrasting results, where none of the evaluated methods produced accurate models. A FastQC [51] analysis revealed that, of the four species considered, these two species have the lowest sequencing data quality (Additional file 3: Table S1). Moreover, for these species only, the data were acquired using a combination of MiSeq and HiSeq instruments, which could undermine the comparability of the genomes [52].
We therefore hypothesize that the inability to learn accurate models on some datasets is either due to the quality of the sequencing data, an insufficient number of learning examples, or extra-genomic factors that influence the phenotype. For instance, epigenetic modifications have been shown to alter gene expression in bacteria and play a role in virulence [53, 54]. Assuming the availability of the data, future work could explore extensions to jointly learn models from genetic and epigenetic data.
In terms of sparsity, the SCM was shown to produce the sparsest models. Notably, this was achieved without negatively impacting the prediction accuracy of the models. We hypothesize that this is due to the small number of genomic variations that drive some genome-related phenotypes.
Hence, we presented empirical evidence that, in the context of genomic biomarker discovery, the SCM outperforms a variety of machine learning algorithms, which were selected to have diverse model structures and levels of sparsity. This suggests that the conjunctions and disjunctions produced by the SCM, in addition to being intuitively understandable, are more suitable for this task. In “Methods”, we provide tight statistical guarantees on the accuracy of the models obtained using our approach. Such theoretical results are uncommon for this type of tool and, together with the empirical results, indicate the SCM is a tool of choice for genomic biomarker discovery.
Conclusions
The identification of genomic biomarkers is a key step towards improving diagnostic tests and therapies. In this study, we have demonstrated how machine learning can be used to identify such biomarkers in the context of case-control studies. We proposed a method that relies on the Set Covering Machine algorithm to generate models that are accurate, concise and intelligible to domain experts. The obtained models make phenotypic predictions based on the presence or absence of short genomic sequences, which makes them well-suited for translation to the clinical settings using methods such as PCR. The proposed method is broadly applicable and is not limited to predicting drug response in bacteria. Hence, we are confident that this work will transpose to other organisms, phenotypes, and even to scenarios involving complex mixtures of genomes, such as metagenomic studies. The efficiency and the simplicity of the models obtained using our method could guide biological efforts for understanding a plethora of phenotypes.
To facilitate the integration of our method in genomic analysis pipelines, we provide Kover, an implementation that efficiently combines the modeling power of the Set Covering Machine with the versatility of the k-mer representation. The implementation is open-source and is available at http://github.com/aldro61/kover.
Methods
Genome assembly and fragmentation into k-mers
All genomes were assembled using the SPAdes genome assembler [55] and were subsequently split into k-mers using the Ray Surveyor tool, which is part of the Ray de novo genome assembler [56, 57]. Genome assembly is not mandatory for applying our method. Instead, one could use k-mer counting software to identify the k-mers present in the raw reads of each genome. However, with sufficient coverage, genome assembly can increase the quality of the k-mer representation by eliminating sequencing errors. This reduces the number of unique k-mers and thus, the size of the feature space.
Choosing the k-mer length
The k-mer length is an important parameter of the proposed method. Exceedingly small values of k will yield k-mers that ambiguously map to multiple genomic loci. Yet, an exceedingly large k will yield very specific k-mers that only occur in few genomes. To our knowledge, a general protocol for selecting the k-mer length does not exist. We therefore propose two approaches to selecting an appropriate length.
The first consists of using prior biological knowledge about the organism under study. For instance, the mutation rate is an important factor to consider. If it is expected to be high (e.g., viruses), small k-mers are preferable. Conversely, if the mutation rate is low, longer k-mers can be used, allowing the identification of additional genomic variations, such as DNA tandem repeats, which can be relevant for predicting the phenotype [58]. Extensive testing has shown that k=31 appears to be optimal for bacterial genome assembly [57] and recent studies have employed it for reference-free bacterial genome comparisons [19, 20]. Hence, this value was used in the current study.
The second method is better suited for contexts where no prior knowledge is available. It consists of considering k as a hyperparameter of the learning algorithm and setting its value by cross-validation. In this case, the algorithm is trained using various values of k and the best value is selected based on the cross-validation score. This process is more computationally intensive, since the algorithm needs to be trained multiple times. However, it ensures that the k-mer length is selected based on the evidence of a good generalization performance.
In this study, both approaches were compared and shown to yield similar results. Indeed, no significant variation in accuracy was observed for the models obtained with k = 31 and with k selected from {15,21,31,51,71,91} by cross-validation (Additional file 1: Appendix 3). This corroborates that k-mers of length 31 are well-suited for bacterial genome comparisons. Moreover, it indicates that cross-validation can recover a good k-mer length in the absence of prior knowledge.
Applying the set covering machine to genomes
We represent each genome by the presence or absence of each possible k-mer. There are 4k possible k-mers and hence, for k=31, we consider 431>4·1018 k-mers. Let \(\mathcal {K}\) be the set of all, possibly overlapping, k-mers present in at least one genome of the training set \({\mathcal {S}}\). Observe that \({\mathcal {K}}\) omits k-mers that are absent in \({\mathcal {S}}\) and thus non-discriminatory, which allows the SCM to efficiently work in this enormous feature space. Then, for each genome x, let \({\boldsymbol {\phi }}({\mathbf {x}}) \in \{0,1\}^{|\mathcal {K}|}\) be a \(|{\mathcal {K}}|\) dimensional vector, such that its component ϕ i (x)=1 if the i-thk-mer of \(\mathcal {K}\) is present in x and 0 otherwise. An example of this representation is given in Fig. 5. We consider two types of boolean-valued rules: presence rules and absence rules, which rely on the vectors ϕ(x) to determine their outcome. For each k-mer \(k_{i} \in \mathcal {K}\), we define a presence rule as \(p_{k_{i}}({\boldsymbol {\phi }}({\mathbf {x}})) \overset {\text {\tiny {def}}}{=} I[\phi _{i}({\mathbf {x}}) \,=\, 1]\) and an absence rule as \(a_{k_{i}}({\boldsymbol {\phi }}({\mathbf {x}})) \overset {\text {\tiny {def}}}{=} I[\phi _{i}({\mathbf {x}}) \! =\! 0]\), where I[a]=1 if a is true and I[a]=0 otherwise. The SCM, which is detailed in Additional file 1: Appendix 1, can then be applied by using {(ϕ(x 1),y 1),…,ϕ(x m ),y m )} as the set \({\mathcal {S}}\) of learning examples and by using the set of presence/absence rules defined above as the set \({\mathcal {R}}\) of boolean-valued rules. This yields a phenotypic model which explicitly highlights the importance of a small set of k-mers. In addition, this model has a form which is simple to interpret, since its predictions are the result of a simple logical operation.
Tiebreaker function
At each iteration of the SCM algorithm [16], the rules are assigned a utility score based on their ability to classify the examples for which the outcome of the model is not settled. The number of such examples decreases at each iteration. Consequently, it is increasingly likely that many rules have an equal utility score. This phenomenon is accentuated when considering many more rules than learning examples, which is the case of biomarker discovery. We therefore extend the algorithm by introducing a tiebreaker function for rules of equal utility. The tiebreaker consists in selecting the rule that best classifies all the learning examples, i.e., the one with the smallest empirical error rate. This simple strategy favors rules that are more likely to be associated with the phenotype.
Exploiting equivalent rules
When applied to genomic data, the tiebreaker does not always identify a single best rule. This is a consequence of the inherent correlation that exists between k-mers that occur simultaneously in the genome, such as k-mers that overlap or that are nearby in the genomic structure. The rules that the tiebreaker cannot distinguish are deemed equivalent. Our goal being to obtain concise models, only one of these rules is included in the model and used for prediction. This rule is selected randomly, but other strategies could be applied. As it has been demonstrated in the results, these rules provide a unique approach for deciphering, de novo, new biological mechanisms without the need for prior information. Indeed, the set of k-mers targeted by these rules can be analyzed to draw conclusions on the type of genomic variation that was identified by the algorithm, e.g., point mutation, indel or structural variation.
Measuring the importance of rules
We propose a measure of importance for the rules in a conjunction or disjunction model. Taking rule importance into consideration can facilitate the interpretation of the model. Importance should be measured proportionally to the impact of each rule on the predictions of the model. Observe that for any example x, a conjunction model predicts h(x)=0 if at least one of its rules returns 0. Thus, when a rule returns 0, it directly contributes to the outcome of the model. Moreover, a conjunction model predicts h(x)=1 if and only if exactly all of its rules return 1. Hence, in this case, all the rules contribute equally to the prediction and thus, we do not need to consider this case in the measure of importance. The importance of a rule r in a conjunction model is therefore given by:
where r(x) is the outcome of rule r on example x. In contrast, a disjunction model predicts h(x)=1 if at least one of its rules return 1. Moreover, it predicts h(x)=0 if and only if exactly all of its rules returns 0. The importance of a rule in a disjunction model is thus given by:
An upper bound on the error rate
When the number of learning examples is much smaller than the number of features, many machine learning algorithms tend to overfit the training data and thus, have a poor generalization performance [13]. Genomic biomarker discovery fits precisely in this regime. Using sample-compression theory [59–61], we obtained an upper bound on the error rate, R(h), of any model, h, learned using our proposed approach. Interestingly, this bound indicates that we are not in a setting where the SCM is prone to overfitting, even if the number of features is much larger than the number of example.
Formally, for any distribution D, with probability at least 1−δ, over all datasets \({\mathcal {S}}\) drawn according to D m, we have that all models h have R(h)≤ε, where
where m is the number of learning examples, |h| is the number of rules in the model, \({\mathcal {Z}}\) is a set containing \(m_{\mathcal {Z}} \leq |h|\) learning examples (genomes) in which each k-mer in the model can be found, \(|{\mathcal {Z}}|\) is the total number of nucleotides in \({\mathcal {Z}}\) and r is the number of prediction errors made by h on \({\mathcal {S}} \setminus {\mathcal {Z}}\). The steps required to obtain this bound are detailed in Additional file 1: Appendix 4.1.
This theoretical result guarantees that our method will achieve good generalization, regardless of the number of possible features under consideration (4k), provided that we obtain a sparse model (small |h|) that makes few errors on the training set (small r). Hence, the occurrence of overfitting is not influenced by the immensity of the feature space under consideration. This is theoretical evidence that the SCM is a method of choice for genomic biomarker discovery studies. Moreover, this is reflected in our empirical results, which indicate that using various k-mer lengths, and thus feature spaces of various sizes, does not significantly affect the accuracy of the obtained models (p=0.551) (Additional file 1: Appendix 3).
This result is counter-intuitive with respect to classical machine learning theory and highlights the benefits of using sample-compression theory to analyze the behavior of learning algorithms.
Finally, following the idea of Marchand and Shawe-Taylor [16], we attempted to use the bound value as a substitute for 5-fold cross-validation. In this case, the bound value was used to determine the best combination of hyperparameter values (Additional file 1: Appendix 4.2). This led to a sixfold decrease in the number of times the SCM had to be trained and yielded sparser models (p=0.014) with similar accuracies (p=0.463).
Efficient implementation
The large size of genomic datasets tends to surpass the memory resources of modern computers. Hence, there is a need for algorithms that can process such datasets without solely relying on the computer’s memory. Out-of-core algorithms achieve this by making efficient use of external storage, such as file systems. Along with this work, we propose Kover, an out-of-core implementation of the Set Covering Machine tailored for presence/absence rules of k-mers. Kover implements all the algorithmic extensions proposed in this work. It makes use of the HDF5 library [62] to efficiently store the data and process it in blocks. Moreover, it exploits atomic CPU instructions to accelerate computations. The details are provided in Additional file 1: Appendix 5. Kover is implemented in the Python and C programming languages, is open-source software and is available free of charge.
Future work
The proposed method is currently limited to the presence or absence of k-mers. This binary representation leads to desirable algorithmic properties and allows the use of highly efficient atomic CPU instructions in the implementation. Consequently, the proposed method scales linearly with the number of k-mers and genomes, something that would not be possible if k-mer frequencies were considered. In future work, we will explore ways to incorporate k-mer frequencies, while preserving the scalability of our method. This new type of model will allow the detection of k-mers at multiple genomic loci, which could prove important for modeling phenotypes that are affected by structural variations, such as copy number variations.
Abbreviations
- L1SVM:
-
L1-norm regularized support vector machine
- L2SVM:
-
L2-norm regularized support vector machine
- LinSVM:
-
linear kernel support vector machine
- MEGA:
-
macrolide efflux genetic assembly
- PolySVM:
-
polynomial kernel support vector machine
- PCR:
-
polymerase chain reaction
- RRDR:
-
rifampicin resistance-determining region
- SCM:
-
set covering machine
- SNP:
-
single nucleotide polymorphism
References
Azuaje F. Bioinformatics and Biomarker Discovery. “Omic” Data Analysis for Personalized Medicine. Chichester, United Kingdom: John Wiley & Sons; 2011.
Koboldt DC, Steinberg KM, Larson DE, Wilson RK, Mardis ER. The next-generation sequencing revolution and its impact on genomics. Cell. 2013; 155(1):27–38.
Mbianda C, El-Meanawy A, Sorokin A. Mechanisms of BK virus infection of renal cells and therapeutic implications. J Clin Virol. 2015; 71:59–62.
Simon R. Genomic biomarkers in predictive medicine: an interim analysis. EMBO Mol Med. 2011; 3(8):429–35.
van Dijk EL, Auger H, Jaszczyszyn Y, Thermes C. Ten years of next-generation sequencing technology. Trends Genet. 2014; 30(9):418–26.
Brookes AJ. The essence of snps. Gene. 1999; 234(2):177–86.
Nielsen R, Paul JS, Albrechtsen A, Song YS. Genotype and SNP calling from next-generation sequencing data. Nat Rev Genet. 2011; 12(6):443–51.
Bonham-Carter O, Steele J, Bastola D. Alignment-free genetic sequence comparisons: a review of recent approaches by word analysis. Brief Bioinform. 2014; 15(6):890–905.
Leimeister CA, Boden M, Horwege S, Lindner S, Morgenstern B. Fast alignment-free sequence comparison using spaced-word frequencies. Bioinformatics. 2014; 177:1991–1999.
Song K, Ren J, Reinert G, Deng M, Waterman MS, Sun F. New developments of alignment-free sequence comparison: measures, statistics and next-generation sequencing. Brief Bioinform. 2014; 15(3):343–53.
Vinga S, Almeida J. Alignment-free sequence comparison-a review. Bioinformatics. 2003; 19(4):513–23.
Vinga S. Biological squence analysis by vector-valued functions: revisiting alignment-free methodologies for dna and protein classification. Adv Comput Methods for Biocomputing Bioimaging. 2007:71–107.
Hastie T, Tibshirani R, Friedman J. The Elements of Statistical Learning. Berlin, Germany: Springer; 2013.
Saeys Y, Inza I, Larrañaga P. A review of feature selection techniques in bioinformatics. Bioinformatics. 2007; 23(19):2507–17.
Guyon I, Elisseeff A. An introduction to variable and feature selection. J Mach Learn Res. 2003; 3:1157–82.
Marchand M, Shawe-Taylor J. The set covering machine. J Mach Learn Res. 2002; 3:723–46.
World Health Organization. Antimicrobial Resistance: Global Report on Surveillance. Geneva, Switzerland: World Health Organization; 2014.
Davies J, Davies D. Origins and evolution of antibiotic resistance. Microbiol Mol Biol Rev. 2010; 74(3):417–33.
Earle SG, Wu CH, Charlesworth J, Stoesser N. Identifying lineage effects when controlling for population structure improves power in bacterial association studies. Nature Microbiology. 2016; 1:16041.
Bradley P, Gordon NC, Walker TM, Dunn L, Heys S, Huang B, Earle S, Pankhurst LJ, Anson L, de Cesare M, Piazza P, Votintseva AA, Golubchik T, Wilson DJ, Wyllie DH, Diel R, Niemann S, Feuerriegel S, Kohl TA, Ismail N, Omar SV, Smith EG, Buck D, McVean G, Walker AS, Peto TEA, Crook DW, Iqbal Z. Rapid antibiotic-resistance predictions from genome sequence data for Staphylococcus aureus and Mycobacterium tuberculosis. Nat Commun. 2015; 6:10063.
Breiman L, Friedman J, Stone CJ, Olshen RA. Classification and Regression Trees. New York: CRC press; 1984.
Cortes C, Vapnik V. Support-vector networks. Mach Learn. 1995; 20(3):273–97.
Cheng B, Titterington DM. Neural networks: a review from a statistical perspective. Stat Sci. 1994; 9:2–30.
Merker M, Blin C, Mona S, Duforet-Frebourg N, Lecher S, Willery E, Blum MGB, Rüsch-Gerdes S, Mokrousov I, Aleksic E, Allix-Béguec C, Antierens A, Augustynowicz-Kopeć E, Ballif M, Barletta F, Beck HP, Barry CE, Bonnet M, Borroni E, Campos-Herrero I, Cirillo D, Cox H, Crowe S, Crudu V, Diel R, Drobniewski F, Fauville-Dufaux M, Gagneux S, Ghebremichael S, Hanekom M, Hoffner S, Jiao WW, Kalon S, Kohl TA, Kontsevaya I, Lillebæk T, Maeda S, Nikolayevskyy V, Rasmussen M, Rastogi N, Samper S, Sanchez-Padilla E, Savic B, Shamputa IC, Shen A, Sng LH, Stakenas P, Toit K, Varaine F, Vukovic D, Wahl C, Warren R, Supply P, Niemann S, Wirth T. Evolutionary history and global spread of the Mycobacterium tuberculosis Beijing lineage. Nat Genet. 2015; 47(3):242–9.
Kos VN, Deraspe M, McLaughlin RE, Whiteaker JD, Roy PH, Alm RA, Corbeil J, Gardner H. The resistome of Pseudomonas aeruginosa in relationship to phenotypic susceptibility. Antimicrob Agents Chemother. 2015; 59(1):427–36.
Croucher NJ, Finkelstein JA, Pelton SI, Mitchell PK, Lee GM, Parkhill J, Bentley SD, Hanage WP, Lipsitch M. Population genomics of post-vaccine changes in pneumococcal epidemiology. Nat Genet. 2013; 45(6):656–63.
Schölkopf B, Tsuda K, Vert JP. Kernel Methods in Computational Biology. Cambridge, Massachusetts: MIT press; 2004.
Shawe-Taylor J, Cristianini N. Kernel Methods for Pattern Analysis: Cambridge university press; 2004.
Kingsford C, Salzberg SL. What are decision trees?Nat Biotechnol. 2008; 26(9):1011–3.
Noble WS. What is a support vector machine?Nat Biotechnol. 2006; 24(12):1565–1567.
Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, Blondel M, Prettenhofer P, Weiss R, Dubourg V, Vanderplas J, Passos A, Cournapeau D, Brucher M, Perrot M, Duchesnay É. Scikit-learn: machine learning in python. J Mach Learn Res. 2011; 12:2825–30.
Fan RE, Chang KW, Hsieh CJ, Wang XR, Lin CJ. LIBLINEAR: a library for large linear classification. J Mach Learn Res. 2008; 9:1871–4.
Chang CC, Lin CJ. Libsvm: a library for support vector machines. ACM Trans Intell Syst Technol (TIST). 2011; 2(3):27.
Wilcoxon F. Individual Comparisons by Ranking Methods. Biometrics Bulletin. 1945; 1(6):80.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990; 215(3):403–10.
Cade CE, Dlouhy AC, Medzihradszky KF, Salas-Castillo SP, Ghiladi RA. Isoniazid-resistance conferring mutations in mycobacterium tuberculosis katg: Catalase, peroxidase, and inh-nadh adduct formation activities. Protein Sci. 2010; 19(3):458–74.
Da Silva PEA, Palomino JC. Molecular basis and mechanisms of drug resistance in mycobacterium tuberculosis: classical and new drugs. J Antimicrob Chemother. 2011; 66(7):1417–30.
Daly MM, Doktor S, Flamm R, Shortridge D. Characterization and prevalence of MefA, MefE, and the associated msr(D) gene in Streptococcus pneumoniae clinical isolates. J Clin Microbiol. 2004; 42(8):3570–4.
Ambrose KD, Nisbet R, Stephens DS. Macrolide efflux in streptococcus pneumoniae is mediated by a dual efflux pump (mel and mef) and is erythromycin inducible. Antimicrob Agents Chemother. 2005; 49(10):4203–9.
Basavanna S, Chimalapati S, Maqbool A, Rubbo B, Yuste J, Wilson RJ, Hosie A, Ogunniyi AD, Paton JC, Thomas G, Brown JS. The effects of methionine acquisition and synthesis on streptococcus pneumoniae growth and virulence. PLoS ONE. 2013; 8(1):49638.
Tenson T, Lovmar M, Ehrenberg M. The mechanism of action of macrolides, lincosamides and streptogramin B reveals the nascent peptide exit path in the ribosome. J Mol Biol. 2003; 330(5):1005–14.
Farrow KA, Lyras D, Rood JI. The macrolide-lincosamide-streptogramin B resistance determinant from Clostridium difficile 630 contains two erm(B) genes. Antimicrob Agents Chemother. 2000; 44(2):411–3.
Vester B, Douthwaite S. Macrolide resistance conferred by base substitutions in 23S rRNA. Antimicrob Agents Chemother. 2001; 45(1):1–12.
Brouwer MSM, Warburton PJ, Roberts AP, Mullany P, Allan E. Genetic organisation, mobility and predicted functions of genes on integrated, mobile genetic elements in sequenced strains of Clostridium difficile. PLoS ONE. 2011; 6(8):23014.
Kaminska KH, Purta E, Hansen LH, Bujnicki JM, Vester B, Long KS. Insights into the structure, function and evolution of the radical-SAM 23S rRNA methyltransferase Cfr that confers antibiotic resistance in bacteria. Nucleic Acids Res. 2010; 38(5):1652–63.
Waxman DJ, Strominger JL. Penicillin-binding proteins and the mechanism of action of beta-lactam antibiotics. Ann Rev Biochem. 1983; 52:825–69.
Wasels F, Spigaglia P, Barbanti F, Mastrantonio P. Clostridium difficile erm(B)-containing elements and the burden on the in vitro fitness. J Med Microbiol. 2013; 62(Pt 9):1461–7.
Hsu PD, Lander ES, Zhang F. Development and applications of crispr-cas9 for genome engineering. Cell. 2014; 157(6):1262–78.
Nair J, Rouse DA, Bai GH, Morris SL. The rpsL gene and streptomycin resistance in single and multiple drug-resistant strains of Mycobacterium tuberculosis. Mol Microbiol. 1993; 10(3):521–7.
Fani F, Leprohon P, Zhanel GG, Bergeron MG, Ouellette M. Genomic analyses of DNA transformation and penicillin resistance in Streptococcus pneumoniae clinical isolates. Antimicrob Agents Chemother. 2014; 58(3):1397–1403.
FastQC A Quality Control Tool for High Throughput Sequence Data (version 0.11.5). http://www.bioinformatics.babraham.ac.uk/projects/fastqc/. Accessed 30 June 2016.
Loman NJ, Constantinidou C, Chan J. High-throughput bacterial genome sequencing: an embarrassment of choice, a world of opportunity. Nat Rev. 2012; 10:599–606.
Adam M, Murali B, Glenn NO, Potter SS. Epigenetic inheritance based evolution of antibiotic resistance in bacteria. BMC Evol Biol. 2008; 8(1):1–12. doi:10.1186/1471-2148-8-52.
Casadesús J, Low D. Epigenetic gene regulation in the bacterial world. Microbiol Mol Biol Rev. 2006; 70(3):830–56.
Bankevich A, Nurk S, Antipov D, Gurevich AA, Dvorkin M, Kulikov AS, Lesin VM, Nikolenko SI, Pham SK, Prjibelski AD, Pyshkin A, Sirotkin A, Vyahhi N, Tesler G, Alekseyev MA, Pevzner PA. SPAdes: a new genome assembly algorithm and its applications to single-cell sequencing. J Comput Biol. 2012; 19(5):455–77.
Boisvert S, Laviolette F, Corbeil J. Ray: simultaneous assembly of reads from a mix of high-throughput sequencing technologies. J Comput Biol. 2010; 17(11):1519–33.
Boisvert S, Raymond F, Godzaridis É, Laviolette F, Corbeil J. Ray Meta: scalable de novo metagenome assembly and profiling. Genome Biol. 2012; 13(12):122.
Zhou K, Aertsen A, Michiels CW. The role of variable DNA tandem repeats in bacterial adaptation. FEMS Microbiol Rev. 2014; 38(1):119–41.
Floyd S, Warmuth M. Sample compression, learnability, and the Vapnik-Chervonenkis dimension. Mach Learn. 1995; 21(3):269–304.
Littlestone N, Warmuth M. Relating data compression and learnability. Technical report. 1986.
Marchand M, Sokolova M. Learning with decision lists of data-dependent features. J Mach Learn Res. 2005; 6:427–51.
The HDF Group. Hierarchical Data Format, Version 5. http://www.hdfgroup.org/HDF5/. Accessed 30 June 2016.
Acknowledgements
The authors acknowledge Dr. Éric Audemard, Dr. Sébastien Boisvert, Maia Kaplan, Dr. Sylvain Moineau, Dr. Jean-Louis Plouhinec and Dr. Paul H. Roy for helpful comments and suggestions. Computations were performed on the Colosse supercomputer at Université Laval (resource allocation project: nne-790-ae), under the auspices of Calcul Québec and Compute Canada.
Funding
AD is recipient of an Alexander Graham Bell Canada Graduate Scholarship Doctoral Award of the National Sciences and Engineering Research Council of Canada (NSERC). This work was supported in part by the NSERC Discovery Grants (FL; 262067, MM; 122405), the Canada Research Chair in Medical Genomics (JC) and an award from the Ministère de l’enseignement supérieur, de la recherche, de la science et de la technologie du Québec through Génome Québec (MT). The acquisition of the C. difficile data was supported by the Consortium de Recherche sur le Clostridium difficile, which consists of the following partners: Fonds de la Recherche en Santé du Québec, Canadian Institutes of Health Research, Ministre de la Santé et des Services Sociaux du Québec, Institut National de Santé Publique du Québec, Health Canada, Centre Hospitalier de l’Université de Montréal, McGill University Health Centre, CHU de Québec, and CHU de Sherbrooke (AMB, VL).
Availability of data and material
The datasets supporting the results of this article are available in the GenBank and EMBL repositories at [EMBL:PRJEB2632 (http://www.ebi.ac.uk/ena/data/view/PRJEB2632), EMBL:PRJEB11776 (http://www.ebi.ac.uk/ena/data/view/PRJEB11776), EMBL:PRJEB7281 (http://www.ebi.ac.uk/ena/data/view/PRJEB7281), GenBank:PRJNA264310 (http://www.ncbi.nlm.nih.gov/bioproject/PRJNA264310)].
Kover, an implementation of our method, is available at http://github.com/aldro61/kover.
Authors’ contributions
AD, FL, MM and SG designed the algorithmic extensions to the Set Covering Machine algorithm. AD, FL and MM derived the sample compression bound for the Set Covering Machine. AD designed the out-of-core implementation of the Set Covering Machine. AD, FL, JC, MM and SG designed the experimental protocols and AD conducted the experiments. AD, JC, MD and SG evaluated the biological relevance of the models. MD acquired the data and prepared it for analysis. AMB and VL acquired and provided the C. difficile genomes and the associated antibiotic susceptibility data. AD, FL, JC, MD, MM, MT and SG wrote the manuscript. All authors have read and approved the final manuscript.
Competing interests
The authors declare that they have no competing interests.
Consent for publication
Not applicable.
Ethics approval and consent to participate
Not applicable.
Author information
Authors and Affiliations
Corresponding author
Additional files
Additional file 1
Appendix. The appendix contains supporting information and detailed results that are not essential to the reader’s understanding of the key findings of this study. (PDF 258 kb)
Additional file 2
The antibiotic susceptibility data for the Clostridium difficile genomes. (XLSX 20.2 kb)
Additional file 3
Supplemental Tables. Table S1. A detailed overview of the sequencing data used in this study; Table S2. A detailed overview of the antibiotic resistance datasets used in this study; Table S3. An analysis of overfitting for the Set Covering Machine and support vector machines with linear and polynomial kernels; Table S4. Average and standard deviation of the sensitivities measured on the testing set for 10 random partitions of each dataset; Table S5. Average and standard deviation of the specificities measured on the testing set for 10 random partitions of each dataset; Table S6. Average and standard deviation of the error rates measured on the testing set for 10 random partitions of each dataset. (PDF 457 kb)
Additional file 4
Supplemental Figures. Figure S1. An illustration of the resistance models generated for each antibiotic. (PDF 54 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver(http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Drouin, A., Giguère, S., Déraspe, M. et al. Predictive computational phenotyping and biomarker discovery using reference-free genome comparisons. BMC Genomics 17, 754 (2016). https://doi.org/10.1186/s12864-016-2889-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12864-016-2889-6