Abstract
La1 − xAl x FeO3 (x = 0.0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders were prepared by polymerization complex method. All prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and UV-vis spectrophotometry (UV-vis). The magnetic properties were investigated using a vibrating sample magnetometer (VSM). The X-ray results of all samples show the formation of an orthorhombic phase with the second phase of α-Fe2O3 in doped samples. The crystallite sizes of nanoparticles decreased with increasing Al content, and they are found to be in the range of 58.45 ± 5.90 to 15.58 ± 4.64 nm. SEM and TEM images show the agglomeration of nanoparticles with average particle size in the range of 60 to 75 nm. The FT-IR spectra confirm the presence of metal oxygen bonds of O-Fe-O and Fe-O in the FeO6 octahedra. The UV-vis spectra show strong absorption peaks at approximately 285 nm, and the calculated optical band gaps are found to be in the range of 2.05 to 2.09 eV with increasing Al content. The M-H loop of the pure sample is antiferromagnetic, whereas those of the doped samples tend to be ferromagnetic with increasing Al content. The magnetization, remanent magnetization, and coercive field of the Al-doped sample with x = 0.5 are enhanced to 1.665 emu/g, 0.623 emu/g, and 4,087.0 Oe, respectively.
Background
LaFeO3 with an orthorhombic phase of the ABO3-type perovskite structure has become a currently attractive research topic because it is proposed for various applications in several advanced technologies such as catalysts [1–3], various kinds of chemical and gas sensors [4–9], and electrode materials in solid oxide fuel cells [10]. In general, LaFeO3 consists of FeO6 octahedral units with La3+ ions at the corners [11, 12]. The advantage of this structure is the replaceability of metallic ions at both A and B sites by various transition metals. Pure and doped LaFeO3 (Pd, Al, Zn, Ag, Sr, Ir, Ca, Co, etc.) were studied for various purposes and aspects with reports of optical, electrical, and magnetic properties [13–25].
Research on pure and doped LaFeO3 nanostructures reveal that the property and quality of the materials are strongly influenced by the synthesis method. The synthesis method is usually related to the specific preparation conditions which can result in various properties of the end products. Various techniques were employed for the synthesis of pure and doped LaFeO3 such as sol-gel/combustion method [26–40], microwave-assisted method [41–43], solid-state reaction method [14, 44–46], thermal decomposition [47, 48], microemulsion method [49], hydrothermal method [50–52], hot soap method [53], spray drying [54], electrospinning [55], drip pyrolysis [19], and polymerization complex method [56–59]. However, polymerization complex method based on polyesterification between citric acid (CA) and ethylene glycol (EG) is the most attractive because it is simple, cost effective, time saving, and environmentally benign.
Thus, we propose in this research the synthesis of La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders using a simple polymerization complex method. The magnetic and optical properties of the products were studied. The magnetization, coercive field, and remanent magnetization are measured, and they are expected to be enhanced due to the substitution of small-radius ions of Al on the La site.
Methods
La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) were synthesized by polymerization complex method. Stoichiometric amounts of iron nitrate (Fe(NO3)3.9H2O, Kanto Chemical Co., Chuo-ku, Japan, 99.9%), lanthanum nitrate (LaN3O9.6H2O, Fluka, Seelze, Germany, 99.0%), and aluminum nitrate (Al(NO3)3.9H2O, Carlo Erba Reagenti, Milan, Italy, 99.0%) in the ratio of 1 – x:x:1 (La:Al:Fe) with 1 g of citric acid (C6H8O7.H2O, VWR International Ltd., Radnor, PA, USA, 99.7%) were dissolved in 40 mL ethylene glycol and 20 mL deionized (DI) water. The mixture was magnetically stirred for 1 h in order to obtain stable metal-citric acid complexes. The obtained solution was continuously stirred at 70°C for 1 h. This solution was dried at 120°C on a hot plate. The obtained powders were pre-calcined at 400°C for 3 h to burn out the polymer. The pre-calcined powders were ground and further calcined at 900°C for 3 h in air.
The calcined powders were characterized using an X-ray diffractometer (XRD; XRD-6100, Shimadzu, Kyoto, Japan) with CuKα1 radiation (λ = 1.5405 Å). The morphologies of the synthesized products were observed using a scanning electron microscope (SEM; 1450VP, LEO, Hurley, UK) and a transmission electron microscope (TEM; Tecnai G2 20, FEI, Hillsboro, OR, USA). The components of the powders were analyzed by energy-dispersive X-ray spectroscopy (EDX; Tecnai G2 20, FEI). Fourier transform infrared spectroscopy (FT-IR; Spectrum One FT-IR, Perkin Elmer Instrument, Waltham, MA, USA) was employed to investigate functional groups in all samples. The optical properties were studied by ultraviolet-visible spectroscopy (UV-vis; UV-3101PC, Shimadzu). The magnetizations of all samples were measured using a vibrating sample magnetometer (VSM; VersaLab™ Cryogen-free, Quantum Design, San Diego, CA, USA).
Results and discussion
XRD analysis
The XRD patterns of La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders are shown in Figure 1. The results indicate that the products are a perovskite oxide of an orthorhombic structure with the second phase of α-Fe2O3 in the doped samples of x = 0.2 to 0.5. The XRD results are in good agreement with the standard data of LaFeO3 (JCPDS card no: 37-1493) and α-Fe2O3 (JCPDS card no: 89-0595). The average crystallite size is determined from the X-ray line broadening of the (101), (121), (220), (202), (240), (242), and (204) diffraction peaks using the Scherrer equation, and it is found to be decreased with increasing Al content, as summarized in Table 1. The lattice parameters a, b, and c of the doped samples decreased with the increase of Al content due to the replacement of the larger La3+ ion (radius approximately 1.36 Å) by a smaller Al3+ ion (radius approximately 0.535 Å) [22], as summarized in Table 1. The significant change in the decrease of lattice parameters with increasing Al content is confirmed by the shift of the diffraction peaks to a higher diffraction angle. On the other hand, Al3+ ions can be substituted on B sites of Fe3+ ions because the ionic radius of Al3+ is close to that of the Fe3+ ion (radius approximately 0.78 Å), resulting in the formation of the impurity phase of α-Fe2O3.
SEM analysis
The SEM micrographs of La1 − xAl x FeO3 (x = 0.0, 0.1, 0.3, and 0.5) nanopowders are shown in Figure 2. In Figure 2a, the powders are almost irregularly nanoagglomerated with a mean size of approximately 60 to 75 nm. In Figure 2b,c,d, agglomeration of nanoparticles with a size larger than 100 nm and grain growth can be observed in doped samples. Moreover, the SEM images reveal a uniform grain size distribution and homogeneous nanostructure.
TEM analysis
Figure 3a,b,c,d shows bright-field TEM images with the corresponding selected area electron diffraction (SAED) patterns and EDX spectra of La1 − xAl x FeO3 (x = 0.0, 0.1, 0.3, and 0.5) nanopowders. It is obvious in Figure 3a1,b1,c1,d1 that the particulates consist of the agglomeration of numerous nanocrystallite particles of irregular shape, corresponding to the SEM observation in Figure 2. The average particle size is estimated and found to be approximately 60 to 75 nm. The SAED patterns in Figure 3a2,b2,c2,d2 show ring patterns, indicating that all doped samples are polycrystalline. Each SAED pattern can be indexed to a certain crystalline plane which is found to be consistent with that of the XRD results in Figure 1. The EDX spectra of these samples are shown in Figure 3a3,b3,c3,d3. The EDX results clearly show that all samples contain La, Fe, Al, and O with higher intensity peaks of Al in samples of high Al content. The Cu peaks that appeared come from the copper grid.
FT-IR analysis
Figure 4 shows the FT-IR spectra of La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders. All spectra show broad absorption peaks at approximately 3,449.13 cm−1, corresponding to the symmetric and asymmetric stretching modes of water molecules. The observed broad band at approximately 1,600 cm−1 corresponds to the bending mode of O-H bond. The strong absorption peaks in the range of 500 to 600 cm−1 reveal the presence of metal oxygen bonds which can be assigned to the vibrations of Fe-O and O-Fe-O bonding in the octahedral structure of La1 − xAl x FeO3. These results are in good agreement with the FT-IR spectra of pure and doped LaFeO3 reported in the literature [14, 41, 43, 47, 50].
UV-vis analysis
The UV-vis spectra of La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders are shown in Figure 5. In Figure 5, broad absorption peaks are observed in all samples at approximately 285 nm with the infinitesimal redshifted to approximately 290 nm. From the plot of (αhν)2 vs. hν in Figure 6a,b,c,d, the optical band gaps (Eg) of the samples can be determined by extrapolating the slope to the zero value of (αhν)2, and the obtained values are summarized in Table 2. It is found that the optical band gaps do not significantly vary with increasing Al content.
VSM analysis
Figure 7a,b,c,d,e,f,g shows the magnetization curves of La1 − xAl x FeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders measured at room temperature by VSM. As can be seen in Figure 7a, the magnetization curve of the pure sample is very narrow, indicating the antiferromagnetic behavior of the sample, while those of the doped samples show larger loops of ferromagnetic behavior with higher magnetization according to higher Al content (Figure 7b,c,d,e,f,g). In addition, the values of coercive field (Hc), magnetization (M), and remanent magnetization (Mr) are enhanced with increasing Al content, as summarized in Table 2. In general, it is well known that pure LaFeO3 exhibits antiferromagnetic behavior. This behavior is due to the anti-alignment of the magnetic moments of the Fe3+ ions. However, LaFeO3 can behave ferromagnetically due to the small crystallite size. The decrease of crystallite size can increase the uncompensated spins at the surface [60, 61]. In our work, it is evident in Table 1 that the crystallite size of La1 − xAl x FeO3 decreases for higher Al content, resulting in the enhancement of ferromagnetism with higher M value. In addition, the second phase of α-Fe2O3 detected in the XRD measurements may also be attributed to the ferromagnetism in La1 − xAl x FeO3. Figure 8 shows the temperature-dependent magnetization of La0.5Al0.5FeO3 nanopowder investigated by field-cooled (FC) measurement in the temperature range of 50 to 390 K. The M decreases as the temperature increases because of the thermal fluctuations causing the randomization of polarization direction. It is clearly seen in Figure 8 that the zero value of magnetization cannot be observed in the temperature range of measurement, implying that the Curie temperature (Tc) is above 400 K.
Conclusions
In summary, La1 − xAlxFeO3 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) nanopowders were successfully synthesized by polymerization complex method at a temperature of 900°C for 3 h in air. XRD analysis reveals an orthorhombic phase of the nanopowders with average crystallite size in the range of 15.58 ± 4.64 to 58.54 ± 5.90 nm. The impurity phase of α-Fe2O3 is found in doped samples of x ≥ 0.2. SEM and TEM images show agglomerated nanoparticles of irregular shape with estimated particle sizes in the range of 60 to 75 nm. The lattice parameters are found to decrease with increasing Al content. The EDX results clearly show only the main peaks of La, Fe, Al, and O in all samples. The UV-vis spectra show the infinitesimal shift from 285 to 290 nm as the Al content is increased. The increase of Al content does not significantly affect the optical band gaps which are found to be in the range of 2.05 to 2.09 eV. Al3+ substitution in LaFeO3 crystals can enhance the magnetization (M), coercive field (Hc), and remanent magnetization (Mr) of Al-doped samples by a factor of 8, 11, and 89, respectively. The ferromagnetism in La1 − xAl x FeO3 is due to the size effect and impurity.
References
Mawdsley JR, Krause TR: Rare earth-first-row transition metal perovskites as catalysts for the autothermal reforming of hydrocarbon fuels to generate hydrogen. Appl Catal A-Gen 2008, 334(1–2):311–320.
Pecchi G, Reyes P, Zamora R, Cadus LE, Fierro JLG: Surface properties and performance for VOCs combustion of LaFe1−yNi y O3 perovskite oxides. J Solid State Chem 2008, 181(4):905–912. 10.1016/j.jssc.2008.01.020
Delmastro A, Mazza D, Ronchetti S, Vallino M, Spinicci R, Brovetto P, Salis M: Synthesis and characterization of non-stoichiometric LaFeO3 perovskite. Mater Sci Eng B 2001, 79: 140–145. 10.1016/S0921-5107(00)00570-5
Toan NN, Saukko S, Lantto V: Gas sensing with semiconducting perovskite oxide LaFeO3. Physica B 2003, 327: 279–282. 10.1016/S0921-4526(02)01764-7
Lantto V, Saukko S, Toan NN, Reyes LL, Granqvist CG: Gas sensing with perovskite-like oxides having ABO3 and BO3 structures. J Electroceram 2004, 13: 721–726. 10.1007/s10832-004-5182-z
Martinelli G, Carotta M, Ferroni M, Sadaoka Y, Traversa E: Screen-printed perovskite-type thick films as gas sensors for environmental monitoring. Sensor Actuat B-chem 1999, 55: 99–110. 10.1016/S0925-4005(99)00054-4
Inoue T, Seki N, Eguchi K, Arai H: Low‒temperature operation of solid electrolyte oxygen sensors using perovskite‒type oxide electrodes and cathodic reaction kinetics. J Electrochem Soc 1990, 137: 2523. 10.1149/1.2086980
Alcock CB, Doshi RC, Shea Y: Perovskite electrodes for sensors. Solid State Ionics 1992, 51: 281. 10.1016/0167-2738(92)90210-G
Zhao J, Liu Y, Li X, Lu G, You L, Liang X, Liu F, Zhang T, Du Y: Highly sensitive humidity sensor based on high surface area mesoporous LaFeO3 prepared by a nanocasting route. Sensor Actuat B Chem 2013, 18: 802–809.
Minh NQ: Ceramic fuel cells. J Am Ceram Soc 1993, 76: 563–588. 10.1111/j.1151-2916.1993.tb03645.x
Fossdal A, Menon M, Warnhus I, Wiik K, Einarsrud M, Grande T: Crystal structure and thermal expansion of La1-xSr x FeO3 materials. J Am Ceram Soc 2004, 87: 1952–1958.
Bellakki MB, Manivannan V, McCurdy P, Kohli S: Synthesis, and measurement of structural and magnetic properties, of La1-xNa x FeO3 (0.0 ≤ x ≤ 0.3) perovskite oxides. J Rare Earth 2009, 27: 691–697. 10.1016/S1002-0721(08)60318-X
Yao T, Ariyoshi A, Inui T: Synthesis of LaMeO3 (Me = Cr, Mn, Fe, Co) perovskite oxides from aqueous solutions. J Am Ceram Soc 1997, 80(9):2441.
Kaiwen Z, Xuehang W, Wenwei W, Jun X, Siqi T, Sen L: Nanocrystalline LaFeO3 preparation and thermal process of precursor. Adv Powder Technol 2013, 24: 359–363. 10.1016/j.apt.2012.08.009
Eyssler A, Winkler A, Mandaliev P, Hug P, Weidenkaff A, Ferri D: Influence of thermally induced structural changes of 2 wt% Pd/LaFeO3 on methane combustion activity. Appl Catal B-Environ 2011, 106: 494–502. 10.1016/j.apcatb.2011.06.008
Ahmed MA, Okasha N, Hussein B: Enhancement of the magnetic properties of Al/La multiferroic. J Magn Magn Mater 2012, 324: 2349–2354. 10.1016/j.jmmm.2012.02.036
Bhat I, Husain S, Khan W, Patil SI: Effect of Zn doping on structural, magnetic and dielectric properties of LaFeO3 synthesized through sol–gel auto-combustion process. Mater Res Bull 2013, 48: 4506–4512. 10.1016/j.materresbull.2013.07.028
Desai PA, Athawale AA: Microwave combustion synthesis of silver doped lanthanum ferrite magnetic nanoparticles. Defence Sci J 2013, 63: 285–291. 10.14429/dsj.63.2387
Kindermann L, Das D, Bahadur D, Nickel H, Hilpert K: Influence of iridium on the reactivity of LaFeO3 base perovskites. Solid State Ionics 1998, 106: 165–172. 10.1016/S0167-2738(97)00348-2
Li F, Liu Y, Liu R, Sun Z, Zhao D, Kou C: Preparation of Ca-doped LaFeO3 nanopowders in a reverse microemulsion and their visible light photocatalytic activity. Mater Lett 2010, 64: 223–225. 10.1016/j.matlet.2009.10.048
Haron W, Thaweechai T, Wattanathana W, Laobuthee A, Manaspiya H, Veranitisagul C, Koonsaeng N: Structural characteristics and dielectric properties of La1-xCo x FeO3 and LaFe1-xCo x O3 synthesized via metal organic complexes. Energy Procedia 2013, 34: 791–800.
Acharya S, Deb AK, Das D, Chakrabarti PK: Enhanced magnetic behavior of Al substituted LaFeO3 (La(1 − x)Al x FeO3, x = 0.10 and 0.30). Mater Lett 2011, 65: 1280–1282. 10.1016/j.matlet.2011.01.049
Ahmed MA, El-Dek SI: Extraordinary role of Ca2+ ions on the magnetization of LaFeO3 orthoferrite. Mater Sci Eng B 2006, 128: 30–33. 10.1016/j.mseb.2005.11.013
Isupova LA, Yakovleva IS, Tsybulya SV, Kryukova GN, Boldyreva NN, Vlasov AA, Alikina GM, Ivanov VP, Sadykov VA: Physicochemical and catalytic properties of La1-xCa x FeO3–0.5x perovskites. Kinet Catal 2000, 41: 287–291. 10.1007/BF02771432
Traversa E, Nunziante P, Sangaletti L, Allieri B, Depero LE, Aono H, Sadaoka Y: Synthesis and structural characterization of trimetallic perovskite-type rare-earth orthoferrites, La x Sm1–xFeO3. J Am Ceram Soc 2000, 83(5):1087.
Köferstein R, Jäger L, Ebbinghaus SG: Magnetic and optical investigations on LaFeO3 powders with different particle sizes and corresponding ceramics. Solid State Ionics 2013, 249–250: 1–5.
Bellakki MB, Kelly BJ, Manivannan V: Synthesis, characterization, and property studies of (La, Ag)FeO3 (0.0 ≤ x ≤ 0.3) perovskites. J Alloy Compd 2010, 489: 64–71. 10.1016/j.jallcom.2009.08.059
Feng J, Liu T, Xu Y, Zhao J, He Y: Effects of PVA content on the synthesis of LaFeO3 via sol–gel route. Ceram Inter 2011, 37: 1203–1207. 10.1016/j.ceramint.2010.11.045
Qi X, Zhou J, Yue Z, Gui Z, Li L: A simple way to prepare nanosized LaFeO3 powders at room temperature. Ceram Inter 2003, 29: 347–349. 10.1016/S0272-8842(02)00119-0
Parida KM, Reddy KH, Martha S, Das DP, Biswal N: Fabrication of nanocrystalline LaFeO3: an efficient sol–gel auto-combustion assisted visible light responsive photocatalyst for water decomposition. Int J Hydrogen Energy 2010, 35: 12161–12168. 10.1016/j.ijhydene.2010.08.029
Liu T, Xu Y: Synthesis of nanocrystalline LaFeO3 powders via glucose sol–gel route. Mater Chem Phys 2011, 129: 1047–1050. 10.1016/j.matchemphys.2011.05.054
Qi X, Zhou J, Yue Z, Gui Z, Li L: Auto-combustion synthesis of nanocrystalline LaFeO3. Mater Chem Phys 2002, 78: 25–29.
Shabbir G, Qureshi AH, Saeed K: Nano-crystalline LaFeO3 powders synthesized by the citrate–gel method. Mater Lett 2006, 60: 3706–3709. 10.1016/j.matlet.2006.03.093
Tijare SN, Joshi MV, Padole PS, Mangrulkar PA, Rayalu SS, Labhsetwar NK: Photocatalytic hydrogen generation through water splitting on nano crystalline LaFeO3 perovskite. Int J Hydrogen Energy 2012, 37: 10451–10456. 10.1016/j.ijhydene.2012.01.120
Li F, Liu Y, Sun Z, Liu R, Kou C, Zhao Y, Zhao D: Facile preparation of porous LaFeO3 nanomaterial by self-combustion of ionic liquids. Mater Lett 2011, 65: 406–408. 10.1016/j.matlet.2010.10.049
Jadhav AD, Gaikwad AB, Samuel V, Ravi V: A low temperature route to prepare LaFeO3 and LaCoO3. Mater Lett 2007, 61: 2030–2032. 10.1016/j.matlet.2006.08.009
Wang Y, Zhu J, Zhang L, Yang X, Lu L, Wang X: Preparation and characterization of perovskite LaFeO3 nanocrystals. Mater Lett 2006, 60: 1767–1770. 10.1016/j.matlet.2005.12.015
Zhong Z, Chen K, Ji Y, Yan Q: Methane combustion over B-site partially substituted perovskite-type LaFeO3 prepared by sol–gel method. Appl Catal A 1997, 156: 2941.
Cho YG, Choi KH, Kim RY, Jung JS, Lee SH: Characterization and catalytic properties of surface La-rich LaFeO3 perovskite. Bull Korean Chem Soc 2009, 30: 6.
Kondakindi RR, Karan K, Peppley BA: A simple and efficient preparation of LaFeO3 nanopowders by glycine–nitrate process: effect of glycine concentration. Ceram Inter 2012, 38: 449–456. 10.1016/j.ceramint.2011.07.026
Tang P, Tong Y, Chen H, Cao F, Pan G: Microwave-assisted synthesis of nanoparticulate perovskite LaFeO3 as a high active visible-light photocatalyst. Curr Appl Phys 2013, 13: 340–343. 10.1016/j.cap.2012.08.006
Farhadi S, Momeni Z, Taherimehr M: Rapid synthesis of perovskite-type LaFeO3 nanoparticles by microwave-assisted decomposition of bimetallic La[Fe(CN)6] 5H2O compound. J Alloy Compd 2009, 471: 15–18.
Ding JLX, Shu H, Xie J, Zhang H: Microwave-assisted synthesis of perovskite ReFeO3 (Re: La, Sm, Eu, Gd) photocatalyst. Mater Sci Eng B 2010, 171: 31–34. 10.1016/j.mseb.2010.03.050
Chu X, Zhou S, Zhang W, Shui H: Trimethylamine sensing properties of nano-LaFeO3 prepared using solid-state reaction in the presence of PEG400. Mater Sci Eng B 2009, 164: 65–69. 10.1016/j.mseb.2009.06.014
Idrees M, Nadeem M, Atif M, Siddique M, Mehmood M, Hassan MM: Phase structure, microstructure and dielectric properties of (K0.5Na0.5)NbO3-LaFeO3 high-temperature dielectric ceramics. Acta Mater 2011, 59: 1338–1345. 10.1016/j.actamat.2010.10.066
Ivanov SA, Tellgren R, Porcher F, Ericsson T, Mosunov A, Beran P, Korchagina SK, Anil Kumar P, Mathieu R, Nordblad P: Preparation, structural, dielectric and magnetic properties of LaFeO3–PbTiO3 solid solutions. Mater Res Bull 2012, 47: 3253–3268. 10.1016/j.materresbull.2012.08.003
Wei ZX, Xu YQ, Liu HY, Hu CW: Preparation and catalytic activities of LaFeO3 and Fe2O3 for HMX thermal decomposition. J Hazard Mater 2009, 165: 1056–1061. 10.1016/j.jhazmat.2008.10.086
Sadaoka Y, Aonoa H, Traversa E, Sakamoto M: Thermal evolution of nanosized LaFeO3 powders from a heteronuclear complex, La[Fe(CN)6] n H2O. J Alloy Compd 1998, 278: 135–141. 10.1016/S0925-8388(98)00602-1
Giannakas AE, Ladavos AK, Pomonis PJ: Preparation, characterization and investigation of catalytic activity for NO + CO reaction of LaMnO3 and LaFeO3 perovskites prepared via microemulsion method. Appl Catal B-Environ 2004, 49: 147–158. 10.1016/j.apcatb.2003.12.002
Thirumalairajan S, Girija K, Ganesh I, Mangalaraj D, Viswanathan C, Balamurugan A, Ponpandian N: Controlled synthesis of perovskite LaFeO3 microsphere composed of nanoparticles via self-assembly process and their associated photocatalytic activity. Chem Eng J 2012, 209: 420–428.
Zheng W, Liu R, Peng D, Meng G: Hydrothermal synthesis of LaFeO3 under carbonate-containing medium. Mater Lett 2000, 43: 19–22. 10.1016/S0167-577X(99)00223-2
Ji K, Dai H, Deng J, Song L, Xie S, Han W: Glucose-assisted hydrothermal preparation and catalytic performance of porous LaFeO3 for toluene combustion. J Solid State Chem 2013, 199: 164–170.
Fujii T, Matsusue I, Nakatsuka D, Nakanishi M, Takada J: Synthesis and anomalous magnetic properties of LaFeO3 nanoparticles by hot soap method. Mater Chem Phys 2011, 129: 805–809. 10.1016/j.matchemphys.2011.05.015
Fossdal A, Einarsrud MA, Grande T: Mechanical properties of LaFeO3 ceramics. J Eur Ceram Soc 2005, 25: 927–933. 10.1016/j.jeurceramsoc.2004.04.009
Lee WY, Yun HJ, Yoon JW: Characterization and magnetic properties of LaFeO3 nanofibers synthesized by electrospinning. J Alloy Compd 2014, 583: 320–324.
Popa M, Moreno JMC: Lanthanum ferrite ferromagnetic nanocrystallites by a polymeric precursor route. J Alloy Compd 2011, 509: 4108–4116. 10.1016/j.jallcom.2010.12.162
Liu X, Ji H, Gu Y, Xu M: Preparation and acetone sensitive characteristics of nano-LaFeO3 semiconductor thin films by polymerization complex method. Mater Sci Eng B 2006, 133: 98–101. 10.1016/j.mseb.2006.06.027
Popa M, Frantti J, Kakihana M: Lanthanum ferrite LaFeO3+d nanopowders obtained by the polymerizable complex method. Solid State Ionics 2002, 154–155: 437–445.
Popa M, Frantti J, Kakihana M: Characterization of LaMeO3 (Me: Mn, Co, Fe) perovskite powders obtained by polymerizable complex method. Solid State Ionics 2002, 154–155: 135–141.
Kodama RH, Makhlouf SA, Berkowitz AE: Finite size effects in antiferromagnetic NiO nanoparticles. Phys Rev Lett 1997, 79: 1393–1396. 10.1103/PhysRevLett.79.1393
Winkler E, Zyster RD, Mansilla MV, Fiorant D: Surface anisotropy effects in NiO nanoparticles. Phys Rev B 2005, 72: 132409.
Acknowledgements
The authors would like to thank the Department of Physics of the Faculty of Science, Ubon Ratchathani University for providing the XRD facility and Khon Kaen University for providing the SEM, TEM, FT-IR, UV-vis, and VSM facilities. This work is partially supported by the Nanotec-KKU Center of Excellence on Advanced Nanomaterials for Energy Production and Storage and the Integrated Nanotechnology Research Center and Department of Physics, Faculty of Science, Khon Kaen University.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
YJ designed and carried out all the experiments and data analysis and participated in preparing the draft of the manuscript. SH co-supervised the research and gave discussion. ES, the project coordinator, supervised the research, designed the experiment, participated in preparing the draft of the manuscript, and revised the manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Janbutrach, Y., Hunpratub, S. & Swatsitang, E. Ferromagnetism and optical properties of La1 − xAl x FeO3 nanopowders. Nanoscale Res Lett 9, 498 (2014). https://doi.org/10.1186/1556-276X-9-498
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-9-498