Abstract
A series of copolyimides were prepared by thermal imidization of polyamide acids derived from 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 2,3′,3,4′-biphenyltetracarboxylic dianhydride, pyromellitic dianhydride, p-phenylenediamine and 4,4′-oxydialinine commonly used for the production of commercial polyimides. The flexible copolyimide films characterized by ultra-low coefficient of thermal expansion were obtained and characterized by FTIR, WAXD, TG, DMA, TMA, FE-SEM and tensile properties measurement. The results showed that three copolyimides remained semi-crystalline and exhibited high glass transition temperature, high thermal stability, and great ultimate strength.
Similar content being viewed by others
References
D. J. Liaw, K. L. Wang, Y. C. Huang, K. R. Lee, J. Y. Lai, and C. S. Had, Prog. Polym. Sci. 37, 907 (2012).
J. W. Kim, M. H. Yi, and T. Ahn, Thin Solid Films 546, 147 (2013).
S. Mallakpour and M. Dinari, Prog. Org. Coat. 75, 373(2012).
Y. Song, Y. Jin, Q. Liang, K. Li, Y. Zhang, W. Hub, Z. Jiang, and B. Liu, J. Power Sources 238, 236 (2013).
E. Schab-Balcerzak, A. Sobolewska, J. Stumpe, L. Hamryszak, and P. Bujak, Opt. Mater. 35, 155 (2012).
M. Bazzar, M. Ghaemy, and R. Alizadeh, React. Funct. Polym. 73, 492 (2013).
S Kõytepe, H. Adιgüzel, and T. Seckin, J. Alloys Compd. 470, 347 (2009).
M. Hasegawa and R. Nomura, React. Funct. Polym. 71, 109 (2011).
C. A. Scholes, C. P. Ribeiro, S. E. Kentish, and B. D. Freeman, J. Membr. Sci. 450, 72 (2014).
M. Hasegawa, Y. Tsujimura, K. Koseki, and T. Miyazaki, Polym. J. 40, 56 (2008).
J. Ishii, S. Horii, N. Sensui, M. Hasegawa, L. Vladimirov, and M. Kochi, High Perform. Polym. 21, 282 (2009).
S. Ebisawa, J. Ishii, M. Sato, and L. Vladimirov, Eur. Polym. J. 46, 283 (2010).
M. Hasegawa, T. Matano, Y. Shindo, and T. Sugimura, Macromolecules 29, 7897 (1996).
M. Ree, Y. H. Park, K. Kim, and C. E. Park, Polymer 38, 6333 (1997)
K. Fukukawa, M. Okazaki, Y. Sakata, T. Urakami, W. Yamashita, and S. Tamai, Polymer 54, 1053 (2013).
M. B. H. Othman, M. R. Ramli, L. Y. Tyng, Z. Ahmad, and H. M. Akil, Mater. Design 32, 3173 (2011).
X. Jiang, J. Gu, Y. Shen, S. Wang, and X. Tian, Desali-nation 265, 74 (2011).
J. Peter, B. Kosmala, and M. Bleha, Desalination 245, 516 (2009).
A. Marcos-Fernández, A. Tena, A. E. Lozano, J.G.D.L. Campa, J. D. Abajo, L. Palacio, P. Prádanos, and A. Hernández, Eur. Polym. J. 46, 2352 (2010)
E. M. Maya, A. E. Lozano, J. D. Abajo, and J. G. D. L. Campa, Polym. Degrad. Stab. 92, 2294 (2007).
P. M. Hergenrother, K. A. Watson, J. G. Smith, J. W. Connell, and R. Yokota, Polymer 45, 5441 (2004).
E. Mazoniene, J. Bendoraitiene, L. Peciulyte, S. Diliu-nas, and A. Zemaitaitis, Prog. Solid State Chem. 34, 201 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Lei, Y., Shu, Y., Tang, Y. et al. Synthesis and properties of copolyimides based on ternary dianhydrides and dibasic diamines. Polym. Sci. Ser. B 57, 576–583 (2015). https://doi.org/10.1134/S1560090415070027
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1560090415070027