Abstract
The efficiency of using in a lithium battery transition metal sulfides electroplated on a metal support strongly depends on the kind and relief of the support. To make the nickel support rougher for enhancing the adhesion of sulfides, it was electroplated with a nickel–carbon composite, NiC. The discharge capacity and the efficiency of cycling of iron and cobalt sulfides electroplated with a NiC sublayer were higher than in the case when the sulfides were electroplated on a smooth nickel support without composite coating.
Similar content being viewed by others
References
Shembel’, E.M., Apostolova, R.D., Tysyachnyi, V.P., and Kirsanova, I.V., Russ. J. Electrochem., 2005, vol. 41, no. 12, pp. 1305–1315.
Shembel, E., Apostolova, R., Kirsanova, I., and Tysyachny, V., J. Solid State Electrochem., 2007, vol. 12, no. 9, pp. 1155–1157.
Apostolova, R.D., Shembel’, E.M., Talyosef, I., et al., Russ. J. Electrochem., 2009, vol. 45, no. 3, pp. 311–319.
Apostolova, R.D., Kolomoets, O.V., and Shembel’, E.M., Russ. J. Electrochem., 2013, vol. 49, no. 7, pp. 665–675.
Apostolova, R.D., Shembel’, E.M., and Strizhko, A.S., Zh. Prikl. Khim., 1989, vol. 62, no. 10, pp. 2232–2236.
Apostolova, R.D. and Shembel’, E.M., Elektrokhim., 1991, vol. 27, no. 9, pp. 1140–1147.
Ukrainian Patent 81846, Publ. 2008.
Apostolova, R.D., Kolomoyets, O.V., and Shembel’, E.M., Surface Eng. Appl. Electrochem., 2011, vol. 47, no. 5, pp. 465–470.
Apostolova, R.D., Kolomoets, O.V., and Shembel’, E.M., Russ. J. Appl. Chem., 2011, vol. 84, no. 4, pp. 607–614.
Funabiki, A., Inaba, M., Abe, T., and Ogumi, Z., J. Electrochem. Soc., 1999, vol. 146, no. 7, pp. 2443–2448.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © R.D. Apostolova, R.P. Peskov, O.V. Kolomoets, 2015, published in Zhurnal Prikladnoi Khimii, 2015, Vol. 88, No. 10, pp. 1454-1459.
Rights and permissions
About this article
Cite this article
Apostolova, R.D., Peskov, R.P. & Kolomoets, O.V. Enhancing the efficiency of using electroplated iron and cobalt sulfides with a sublayer of NiC composite in a lithium battery. Russ J Appl Chem 88, 1637–1642 (2015). https://doi.org/10.1134/S1070427215100134
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427215100134