Abstract
The microstructures of a commercial aluminum foil and an aluminum foil alloyed by 0.001 wt % scandium are studied before and after electrochemical etching. The strength properties, the capacitance, and the weldability of the foils subjected to electrochemical etching are investigated. We are the first to show that the alloying of aluminum by such a low amount of scandium affects the microstructure of a foil and is sufficient for increasing the strength properties, the capacitance, and the weldability of the aluminum foil used for capacitors.
Similar content being viewed by others
REFERENCES
“Technical Note: aluminum foil for aluminum electrode capacitor,” in KDK Corporation Catalog (2016), No. F-159.
V. I. Elagin, V. V. Zakharov, and T. G. Rostova, “Aluminum alloys alloyed with scandium,” Metalloved. Term. Obrab. Met., No. 1, 24–28 (1992).
V. G. Davydov, V. I. Elagin, V. V. Zakharov, and T. G. Rostova, “Alloying of aluminum alloys with scandium and zirconium additions,” Metalloved. Term. Obrab. Met., No. 8, 25–30 (1996).
V. V. Zakharov and T. G. Rostova, “Hardening of scandium-alloyed aluminum alloys,” Metalloved. Term. Obrab. Met., No. 12, 24–29 (2013).
J. Royset and N. Ryum, “Scandium in aluminum alloys,” Int. Mater. Rev., No. 1, 19–43 (2005).
L. L. Rokhlin, N. R. Bochvar, E. V. Lysova, and N. I. Leonova, “Scandium and yttrium solubilities in an al-based solid solution at 500–600°C,” Russ. Metall. (Metally), No. 2, 180–184 (2006).
V. I. Napalkov and S. V. Makhov, in Alloying and Modification of Aluminum and Magnesium (Izd. MISiS, Moscow, 2002), pp. 358–359.
V. I. Napalkov, G. V. Cherepok, S. V. Makhov, and Yu. M. Chernovol, in Continuous Casting of Aluminum Alloys (Intermet Inzhiniring, Moscow, 2005), pp. 152–178.
I. M. Stroiman, Cold Welding of Metals (Mashinostrroenie, Leningrad, 1985).
Physical Metallurgy. Vol. 3. Lattice Defects. Mechanical Properties of Metals and Alloys, Ed. by R. Cahn (Mir, Moscow, 1968).
V. I. Lad’yanov, S. P. Starostin, O. V. Karban’, B. E. Pushkarev, V. P. Lebedev, and O. M. Kanunnikova, “Surface micro- and nanostructure and the cathode capacitance of an aluminum foil at the sequential stages of etching,” Khim. Fiz. Mesoskop. 18 (3), 421–427 (2016).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Pushkarev, B.E., Mikhailova, S.S., Lad’yanov, V.I. et al. Effect of Small Scandium Additions on the Properties of an Aluminum Foil for Oxide-Electrolytic Capacitors. Russ. Metall. 2019, 517–523 (2019). https://doi.org/10.1134/S0036029519050070
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519050070