Abstract
Coatings with an ultradispersed structure and a nanostructure, which have a high wear resistance, corrosion resistance, and a satisfactory ductility, are fabricated by electron-beam vacuum-free deposition of a powder mixture of chromium carbide, chromium, and titanium carbide using a relativistic electron accelerator. The increase in the wear resistance and the ductility is shown to be associated with the modifying influence of titanium carbide, which manifests itself in sharp structure refinement the presence of numerous nucleation centers in it in the form of disperse TiC precipitates.
Similar content being viewed by others
References
I. L. Pobol’, “Electron-beam modification of metals and alloys,” Metalloved. Term. Obrab. Met., No. 7, 42–47 (1990).
M. V. Radchenko, N. I. Batyrev, and V. N. Timoshenko, “Structure and properties of induction and electron-beam facing made of powder materials,” Metalloved. Term. Obrab. Met., No. 7, 58–60 (1987).
M. V. Radchenko, E. V. Berzon, and E. N. Kosonogov, “Vacuum electron-beam facing of powder tool steel,” Izv. Sib. Otd. Akad. Nauk SSSR, Ser. Tekhn. Nauk, No. 4, 115–118 (1989).
V. E. Panin, V. G. Durakov, G. A. Pribytkov, et al., “Electron-beam facing of powder carbide steels,” Fiz. Khim. Obrab. Mater., No. 6, 53–59 (1998).
N. K. Gal’chenko, S. I. Belyuk, V. E. Panin, et al., “Electron-beam facing of composite coatings based on titanium diboride,” Fiz. Khim. Obrab. Mater., No. 4, 68–72 (2002).
V. L. Auslender and R. A. Salimov, “Electron accelerator of the Institute of Nuclear Physics of SO AN SSSR for national economy,” At. Energ. 44 (5), 403–405 (1978).
M. E. Veis, N. K. Kuksanov, B. M. Korabelnikov, et al., “High voltage electron accelerators at a power of up to 90 kW,” Radiation Physics and Chemistry 35 (4–6), 658–661 (1999).
L. P. Fominskii and P. S. Shishkhanov, “Melting of surfaces and coatings by an electron beam,” Svar. Proizvod., No. 4, 25–27 (1984).
I. M. Poletika, M. D. Borisov, G. V. Kraev, et al., “Formation of the structure and properties of the surface layer in steel during irradiation by a relativistic electron beam,” Metalloved. Term. Obrab. Met., No. 4, 13–16 (1997).
I. M. Poletika, M. G. Golkovskii, M. D. Borisov, et al., “Formation of hardening coatings by facing with a relativistic electron beam,” Fiz. Khim. Obrab. Mater., No. 5, 29–41 (2005).
T. A. Krylova, I. M. Poletika, and M. G. Golkovskii, “Effect of modification and heat treatment on the structure of the coating metal formed by electron-beam facing of tungsten carbide,” Upr. Tekhnologii Pokrytiya, No. 10, 39–45 (2009).
I. M. Poletika, Yu. F. Ivanov, M. G. Golkovskii, et al., “Structure and properties of coatings formed by vacuum-free electron-beam facing,” Fiz. Khim. Obrab. Mater., No. 6, 48–56 (2007).
I. M. Poletika, T. A. Krylova, M. V. Perovskaya, et al., “Structure and mechanical properties of vacuum-free electron-beam facing before and after heat treatment,” Upr. Tekhnologii Pokrytiya, No. 4, 44–53 (2008).
I. M. Poletika, M. G. Golkovskii, T. A. Krylova, et al., “Structure and properties of the chromium-containing coatings produced by electron-beam facing in atmosphere,” Metalloved. Term. Obrab. Met., No. 3, 15–22 (2009).
I. M. Poletika, Yu. F. Ivanov, M. G. Golkovskii, et al., “Structure and properties of the corrosion-resistant coatings produced by electron-beam facing in air atmosphere,” Metalloved. Term. Obrab. Met., No. 12, 33–39 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.M. Poletika, S.F. Ivanov, S.F. Gnyusov, M.V. Perovskaya, 2015, published in Tekhnologiya Metallov, 2015, No. 11, pp. 35–44.
Rights and permissions
About this article
Cite this article
Poletika, I.M., Ivanov, S.F., Gnyusov, S.F. et al. Electron-beam deposition of chromium carbide–based coatings with an ultradispersed structure or a nanostructure. Russ. Metall. 2016, 1275–1282 (2016). https://doi.org/10.1134/S0036029516130127
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029516130127