Abstract
In recent years, transcatheter aortic valve replacement (TAVR) has become the leading method for treating aortic stenosis. While the procedure has improved dramatically in the past decade, there are still uncertainties about the impact of TAVR on coronary blood flow. Recent research has indicated that negative coronary events after TAVR may be partially driven by impaired coronary blood flow dynamics. Furthermore, the current technologies to rapidly obtain non-invasive coronary blood flow data are relatively limited. Herein, we present a lumped parameter computational model to simulate coronary blood flow in the main arteries as well as a series of cardiovascular hemodynamic metrics. The model was designed to only use a few inputs parameters from echocardiography, computed tomography and a sphygmomanometer. The novel computational model was then validated and applied to 19 patients undergoing TAVR to examine the impact of the procedure on coronary blood flow in the left anterior descending (LAD) artery, left circumflex (LCX) artery and right coronary artery (RCA) and various global hemodynamics metrics. Based on our findings, the changes in coronary blood flow after TAVR varied and were subject specific (37% had increased flow in all three coronary arteries, 32% had decreased flow in all coronary arteries, and 31% had both increased and decreased flow in different coronary arteries). Additionally, valvular pressure gradient, left ventricle (LV) workload and maximum LV pressure decreased by 61.5%, 4.5% and 13.0% respectively, while mean arterial pressure and cardiac output increased by 6.9% and 9.9% after TAVR. By applying this proof-of-concept computational model, a series of hemodynamic metrics were generated non-invasively which can help to better understand the individual relationships between TAVR and mean and peak coronary flow rates. In the future, tools such as these may play a vital role by providing clinicians with rapid insight into various cardiac and coronary metrics, rendering the planning for TAVR and other cardiovascular procedures more personalized.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Introduction
Since the first procedure in 2002, transcatheter aortic valve replacement (TAVR) has revolutionized the landscape of interventional cardiology1. It has made heart valve replacement accessible to a wider spectrum of patients with aortic stenosis (AS), especially previously inoperable or high-risk populations1. Since the initial Food and Drug Administration approval, the number of TAVR surgeries has increased each year and in 2019, TAVR surpassed conventional surgical aortic valve replacement in the United States (72,900 procedures vs. 57,600 respectively)2. Similar trends are present globally, with over 450,000 patients in 65 countries undergoing TAVR3. However, as is the case with most medical developments, TAVR is associated with some complications and drawbacks. Although the procedure has improved considerably in the past decade, patients still suffer from post-intervention complications such as vascular complications4, coronary obstruction5, acute coronary syndrome6, cerebrovascular events7, paravalvular leakage8 and others.
Furthermore, a large fraction of patients undergoing TAVR also have comorbid diseases such as coronary artery disease (CAD)9,10. Given the high prevalence of concomitant CAD in patients undergoing TAVR (40–70%11) and the widespread impact of heart disease and CAD (leading cause of death globally)12,13, additional insight into how the procedure would impact coronary blood flow is crucial. Being able to understand, quantify and predict how TAVR would impact coronary blood flow and global hemodynamics on a patient specific basis during the procedure planning may help to prevent adverse coronary related incidences post-TAVR. Acute coronary syndrome for instance, which is caused by a significant reduction in blood flow to the myocardium, has been reported in roughly 5% of patients who underwent TAVR and is associated with a high 30 day morality rate6. With rapidly available and quantitative data about coronary hemodynamics, clinicians may be able to better personalize and optimize TAVR planning.
Moreover, as younger and lower risk patients receive TAVR, it is increasingly likely that they will need a follow up valve replacement in their lifetime (valve in valve TAVR for example)13,14. Recently though, it has become clear that in a substantial number of these cases, invasive coronary catheter access becomes unfeasible due to the leaflet re-location from the first valve implantation13,14. Having a tool that could non-invasively simulate coronary blood flow behaviour would allow clinicians to better plan the follow up procedure and screen for possible coronary related complications when invasive access is not possible.
While medical imaging has allowed clinicians to visualize parts of the cardiovascular system, modalities to capture hemodynamics are relatively limited and are usually restricted to larger arteries and ventricles15. Furthermore, they are typically limited to imaging velocity instead of blood flow rate and pressure. Angiography (invasive) and CT-angiography (minimally/non-invasive) are the primary imaging methods used to evaluate coronary arteries but are limited to capturing the structure of the vessels16. Echocardiography has shown promise in visualizing and quantifying hemodynamics in the coronary arteries but is often limited to just the left main or left anterior descending branch and has seen limited clinical adoption in this domain17. Furthermore, it is not possible in all patients and requires extensive technician training to obtain reliable measurements17. Recently 4D flow MRI has been applied to capture coronary flow but was limited to only the left main coronary artery and required long scan times18. Functional coronary hemodynamic data is predominantly obtained from invasive catheterization to evaluate the severity of CAD and guide coronary interventions, but it is not always collected in the pre/post-TAVR settings19.
In the past decade, researchers have paired medical imaging and routine clinical data with the power of computing to generate non-invasive personalized cardiovascular hemodynamics models20,21. The marriage of computational science and cardiology has yielded tools capable of simulating possible interventions22,23,24,25 studying cardiovascular diseases in-silico26,27,28,29 and generating patient specific metrics30,31,32,33. While many of these models are aimed at the coronary arteries and compute clinically relevant parameters (such as fractional flow reserve34,35), few are designed to simulate or predict the patient-specific impact of TAVR or other non-coronary interventions on coronary hemodynamics. Furthermore, many of these advanced 3D simulation tools require pre-processing and computation time in the order of days for each patient, making the automation and implementation into a clinical workflow challenging36. Alternatively, lumped parameter modelling (LPM) offers a simpler, but computationally quicker method to simulate patient specific cardiology models. It relies on using electronic circuits (and the hydraulic-electrical analogy) to simulated waveforms such as blood flow or pressure over time in different regions of the heart37. By combining a variety of medical imaging techniques, circuit layouts, element tuning, and optimization techniques, patient-specific waveforms can be obtained37. While there exist a series of pure LPMs designed to estimate coronary blood flow37, none of them are highly patient specific and utilize multiple clinical modalities to rapidly estimate both cardiac, circulatory and coronary parameters simultaneously. Moreover, none have been directly applied to study patients undergoing TAVR.
In this paper, we developed a novel lumped parameter computational model to simulate blood flow waveforms in the main proximal coronary branches: LAD, LCX and RCA as well as other global cardiovascular hemodynamic parameters. The model was designed to only utilizes limited, non-invasive clinical inputs. The computational model was then applied to 19 patients with AS who underwent TAVR to examine the impact of the procedure on coronary blood flow rate and various cardiovascular metrics. The coronary flow results from the model were compared with those from a patient specific 3D fluid structure interaction (FSI) model (n = 19) along with a model sensitivity analysis.
Methods
A novel, proof-of-concept patient-specific, image-based LPM was developed, validated, and tested in this study (Fig. 1, Schematic Diagram; Table 1). The model was aimed at: (1) quantifying metrics of circulatory function (global hemodynamics); (2) quantifying metrics of cardiac function (global hemodynamics); (3) providing non-invasive insight into coronary blood flow patterns in the pre-intervention and in the post-intervention states (local hemodynamics). The computational model used Doppler echocardiography (DE), computed tomography (CT) and sphygmomanometer data to generate patient-specific cardiovascular models. The developed computational model was tested on a retrospective dataset of 19 patients who underwent transcatheter aortic valve replacement (TAVR). The aim was to quantify the impact of the procedure on circulatory, cardiac and coronary artery blood flow metrics without the use of invasive catheters.
Electrical and anatomical schematic diagrams of the LPM. (a) Anatomical illustration showing the different circuit meshes and their relationship to the cardiovascular system; (b) Electrical diagram with data inputs. The model includes the following sub-models: LAD, LCX and RCA, left ventricle, aortic valve, left atrium, mitral valve, aortic valve regurgitation, mitral valve regurgitation, systemic circulation, pulmonary circulation. Abbreviations in the schematic are the same as in Table 1.
Our lab previously developed a non-invasive diagnostic computational-mechanics framework for complex valvular, vascular and ventricular disease (called C3V-LPM for simplicity)41. The method was described in detail elsewhere41. In this study, we further developed C3V-LPM to enable the quantification of local and global hemodynamics in patients with mixed and complex valvular, vascular, mini-vascular and ventricular diseases (known as C3VM-LPM) (Fig. 1, Table 1). The developed computational model uses limited input parameters that can all be reliably measured non-invasively using DE, CT and a sphygmomanometer. Currently, none of the above metrics (global and local hemodynamics) can be obtained noninvasively in patients and when invasive procedures are performed, the gathered metrics cannot be by any means as complete as the results that C3VM-LPM provides. The previously created model, C3V-LPM, was validated against clinical catheterization data in forty-nine AS patients with a substantial inter- and intra-patient variability with a wide range of disease41. In addition, some of the sub-models of the patient-specific LPM algorithm have been used and validated previously30,31,42,43,44,45,46,47,48,49,50,51,52, with validation against in vivo cardiac catheterization53,54 in patients with vascular diseases, in vivo MRI data55 in patients with AS, and in vivo MRI data56,57,58 in patients with coarctation and mixed valvular diseases.
The major development with the new C3VM-LPM is the additional capability to non-invasively capture and quantify patient-specific hemodynamics in the following left and right coronary artery branches: (1) LAD, (2) LCX, (3) RCA. The following sections outline the different compartments and tuning approaches developed for this patient specific model (see Fig. 1 for the complete electrical representation).
Study population and data acquisition
19 patients who underwent TAVR in 2020 at St. Joseph's Healthcare and Hamilton Health Science (Hamilton, Canada) were considered in this study. The study protocols were reviewed and approved by the Hamilton Integrated Research Ethics Board (HiREB) for Hamilton Health Science and St. Joseph’s Healthcare. Informed consents were obtained from all human participants. All methods and measurements were performed in accordance with all relevant guidelines and regulations including guidelines from the American College of Cardiology and American Heart Association. Data was collected at 2 time points: pre-procedure and post-procedure. Table 2 outlines the demographic and procedural data of the patients. All data and results are expressed as mean ± standard deviations (SD).
Coronary arteries
Each of coronary branches is modeled using a circuit comprised of 3 resistors (\({\mathrm{R}}_{\mathrm{cor},\mathrm{p}},{\mathrm{R}}_{\mathrm{cor},\mathrm{ m}},{\mathrm{R}}_{\mathrm{cor},\mathrm{d}})\), 2 capacitors (\({\mathrm{C}}_{\mathrm{cor},\mathrm{p}}, {\mathrm{C}}_{\mathrm{cor},\mathrm{ m}})\) and an embedded pressure (voltage) source (\({P}_{im})\). This circuit representation was initially proposed by Mantero et al.59 and further advanced and popularized by Kim et al.60. It has been used in numerous LPMs34,61,62,63,64 and has been shown to capture the bi-phasic nature of coronary flow, in which peak blood flow occurs during the diastole phase rather than during systole59,60. While inductors are including in the ventricle and valvular portion of the model, they were not included in the coronary branches since the inertial phenomena is not significant in the coronary arteries59. The following ODEs are obtained from the circuit layout to model each of the coronary branches63:
where \({\mathrm{q}}_{\mathrm{in}}\), \({\mathrm{P}}_{\mathrm{in}}, {\mathrm{q}}_{\mathrm{out}}\) and \({\mathrm{P}}_{\mathrm{out}}\) are the blood flow and pressure into and out of the coronary branch. \({\mathrm{R}}_{\mathrm{cor},\mathrm{p}},{\mathrm{R}}_{\mathrm{cor},\mathrm{m}},{\mathrm{R}}_{\mathrm{cor},\mathrm{d}}\) are the proximal, medial, and distal resistors while \({\mathrm{C}}_{\mathrm{cor},\mathrm{p}}, {\mathrm{C}}_{\mathrm{cor},\mathrm{m}}\) are the proximal and medial capacitors. \({\mathrm{P}}_{\mathrm{p}}\), \({\mathrm{P}}_{\mathrm{m}}\) and \({\mathrm{P}}_{\mathrm{im}}\) are the proximal, medial and intramyocardial pressures.
\({\mathrm{P}}_{\mathrm{im}}\) is set to be either the left ventricle (LV) or right ventricle (RV) pressure, depending on the coronary artery that it is coupled to. In this study, we used the LV pressure for the left branches (LAD and LCX) and 0.5PLV32 to create the RV pressure for the right branch (RCA).
Determining arterial resistance and compliance in coronaries
Total coronary resistance
The mean flow rate to the coronary arteries was assumed to be 4.0% of the cardiac output (CO)60. The total coronary resistance was then estimated based on a relationship between pressure and flow34:
where \({R}_{cor,total}\) is the total coronary resistance and mean arterial pressure (MAP) is calculated based on systolic blood pressure (SBP), diastolic blood pressure (DBP) and heart rate (HR)65:
Coronary vessel resistance and compliance
The total coronary resistance was divided between each of the branches based on a variation of Murray’s law66, which relates resistance to vessel diameter:
where \({R}_{cor,j}\) is the total coronary resistance in the desired branch and \({A}_{i}\) is the cross sectional area of each of the coronary vessels60. Further division of the total vessel resistance into the 3 resistive elements in the circuit was based on the work of Sankaran et al.67:
where \({R}_{cor,j,p }{, R}_{cor,j,m }{, R}_{cor,j,d}\) are the proximal, medial, and distal resistors.
To account for the cases with coronary vessel stenoses or vessels with considerable reductions in diameters, the following approach was used68:
where \({A}_{sten}\) represents the cross-sectional area of the stenosis/diameter reduction and \({A}_{0}\) represents the normal cross-sectional area (non-stenotic area). The original resistance for the vessel (\({R}_{cor, j}\)), assuming no stenosis, is then multiplied with an area reduction factor (\(\alpha\)) to yield the new branch resistance (\({R}_{cor, red, j}),\) which can then be further divided into the sub resistors.
The left coronary compliance was computed by dividing up the total left coronary compliance based on vessel diameter:
where \({C}_{cor,j}\) is the left coronary vessel compliance, \({C}_{cor,total }^{L}\) is the total left coronary compliance and \({A}_{i}\) is the cross sectional area of each of the left coronary branches60. A manual tuning process was utilized to determine total left coronary compliance value that lead to physiological coronary flow waveforms69,70,71.
The compliances were then divided across the 2 capacitors based on the following relationship, developed by Sankaran et al.67:
where \({C}_{cor,j,p}\) and \({C}_{cor,j,m}\) are the proximal and medial capacitors. The same process was applied for the right coronary vessels.
Input parameters and geometry reconstruction
The C3VM-LPM used the following patient specific measurements as inputs: forward left ventricle outflow tract stroke volume (Forward LVOT-SV), cardiac cycle time (T), ejection time (TEJ), effective orifice area of the aortic valve (\(EO{A}_{AV}\)), effective orifice area of the mitral valve (\(EO{A}_{MV}\)), area of left ventricle outflow tract (\({A}_{LVOT}\)), aortic regurgitant effective orifice area (\(EO{A}_{AR}\)), mitral regurgitant effective orifice area (\(EO{A}_{MR}\)) and paravalvular leakage volume (\({V}_{leak}\)) measured by DE. Branchial systolic and diastolic blood pressure were measured by a sphygmomanometer.
ITK-SNAP (version 3.8.0-BETA)72 and the collected CT data were used to re-construct the 3D geometries of the main coronary arteries (left main coronary artery (LMCA), proximal LAD, LCX and RCA) in both the pre-TAVR and post-TAVR cases. Figure 1b outlines how the inputs parameters are related to the lumped parameter sub-models.
Computational algorithm
The ordinary differential equations which govern the LPM circuit were formulated and solved in Matlab Simscape (MathWorks Inc, Natick USA). Addition functions were written in Matlab and Simulink to enhance the Simscape code. The Matlab Optimization Toolbox and Simulink Design Optimization Toolbox were also used to implement part of the parameter tuning algorithms based on in-house code. The trapezoid rule variable step solver (ode23t) was used with an initial step time of 0.1 ms. The initial voltages and currents of the capacitors and inductors in the circuit were set to zero and the convergence residual criterion was set to 10–6. On average, the model had a computation time in the order of 10–15 s (on a workstation with the configurations of Intel Core™ i7-10700 CPU @2.90 GHz and 64 GB Ram). Table 3 outlines all the model parameters and their values or formulas.
Results
Model verification
In many cases, during the pre-TAVR workup, invasive flow and pressure data in the coronary arteries are not collected and angiography images are often used to decide if the coronary arteries should be re-vascularized before, during or after TAVR19. Since this invasive coronary data in the pre- and post-TAVR cases is limited and not routinely collected, we used our patient-specific 3D FSI model results to validate our newly developed LPM. While this approach is not true gold-standard validation, using a complex FSI model offers a strong proof-of-concept verification method to examine the performance of the LPM. This full 3D modelling technique was applied to the 19 patients and the mean and peak flows for the LAD, LCX and RCA were computed.
The 3D FSI model used individual CT images to reconstruct the geometry of the coronary arteries, proximal ascending aorta, and aortic valve leaflets. Our lab previously developed a non-invasive diagnostic computational-mechanics framework for complex valvular, vascular and ventricular disease (called C3V-LPM for simplicity)41. The method was described in detail elsewhere41. In this study, we further developed C3V-LPM to enable the quantification of local and global hemodynamics in patients with mixed and complex valvular, vascular, mini-vascular and ventricular diseases (known as C3VM-LPM) (Fig. 1). Boundary conditions were obtained from C3VM-LPM (Fig. 1) to provide the ascending aorta and left ventricle pressure waveforms. The FSI interface wall was defined as the interface between the coronary arteries walls and the tissue as the solid domain (please see the supplementary Fig. S1). The 3D coronary arteries flow was simulated using FSI method73,74,75 using finite volume method—the details of FSI algorithm can be found elsewhere22,23,76. Due to the complexity of heart valve motions during full cardiac cycle, the FSI model simulated blood flow in the structure during the diastole phase (main filling phase for coronaries) assuming rigidly closed aortic valve. As the majority of coronary blood flow occurs in diastole (due to the impact of extravascular ventricle compression in systole77), this allows for a relatively complete validation of the total blood flow during the cardiac cycle. The patient-specific lumped parameter model (C3V-LPM) and 3D FSI modelling was previously validated against in-vivo Doppler echocardiography data as explained in Khodaei et al.22,23 and Keshavarz-Motamed et al.30.
Figures 2 and 3 outline the blood flow waveforms in the pre- and post-TAVR settings for all 3 coronary branches for two samples patients according to the LPM developed in this paper (C3VM-LPM) along with the 3D FSI model results. Overall, there is a strong agreement in the waveforms between the modelled coronary blood flow rates from the CV3M-LPM (lumped) and the FSI (3D) model. Table 4 outlines the average mean and peak flow rate error between the two models in pre- and post-TAVR (n = 19).
To better understand how the C3VM-LPM responded to possible independent variations in parameters and inputs, a sensitivity analysis was conducted. The focus of this analysis was on the coronary branches as previous parameter analyses have been conducted on the values in the cardiac and circulatory regions; see42,43 and46 for more details. Table 3 outlines the parameters that control the mean flow rate and shape of the coronary flow curves in the model (see Eqs. 6–12). Each parameter was independently varied by ± 20% and the maximum relative error percentage in the computed mean flow rate for the LAD, LCX and RCA was tabulated (Table 3). Following the approach of Tran et al.78, the heart rate was assumed to a deterministic parameter.
Table 3 outlines the results from the coronary branch sensitivity analysis. The mean coronary flow rates estimated from the model are relatively sensitive to changes in MAP (27.4% max relative error averaged across all 3 branches), CO (22.0%) and branch cross sectional area (LAD—14.2%, LCX—12.6% and RCA—11.5%). Conversely, the mean coronary flow rate is not significantly impacted by changes in the left and right coronary compliance (5.1% and 0.7% respectively). Vessel compliance tends to impact the shape the waveform rather than the mean flow rate directly78. When the left and right coronary compliances were varied by ± 20%, the max relative error in the peak flow rates were only 7.1% and 7.4% respectively.
In addition to above mentioned analysis, we performed another sensitivity analysis for coronary diameter to determine the possible impact of segmentation error on the predicted coronary blood flow from the LPM model. In the analysis, a post-TAVR subject without CAD was selected (Patient #12) to emphasize the impact of segmentation error. The diameter of the LCX branch (originally measured at 1.5 mm) was varied by ± 0.5 mm and the impact on the predicted coronary flow rate in all the 3 coronary branches was tabulated (Table S1). In the case of the mean LCX blood flow, there is a proportional response between diameter and flow while there is an inversely proportional response in the other two branches. Since the blood flow to coronary arteries is relatively constant (~ 4% of the cardiac output), if the diameter of one coronary vessel is increased, flow in this branch will also increase, leading to decreased blood flow in the other branches.
Cardiac and circulatory function and hemodynamics (global hemodynamics)
Using the lumped model, pre- and post-TAVR cardiac and ventricular indices were calculated for the patients (Fig. 4). All the patients who underwent the procedure had aortic stenosis and the severity was assessed by senior cardiologists based on aortic valve flow dynamics according to the European Association of Cardiovascular Imaging and American Society of Echocardiography guidelines79.
The reduction in valve area caused by aortic stenosis led to the formation of high velocity jets driven by the pressure gradient across the valve. In all but 1 patient, valve pressure gradient decreased (61.5% on average) after TAVR. While the valvular pressure reduced for almost all patients, this reduction is not always associated with improved global hemodynamics and better prognosis30.
LV workload is a measure of the required work by the left ventricle to eject blood and overcome the opposing cardiovascular systemic load22,55. The workload was computed through the integral of the left ventricle pressure–volume loop generated by the lumped model. On average, the workload decreased by 4.5% after TAVR (but increased in 9 of the 19 subjects). Similarly, the presence of aortic stenosis pre-TAVR led to elevated LV pressure and impaired LV function for the patients. By surgically implanting the valve, TAVR led to the reduction in LV pressure for 16 of the 19 patients and decreased the pressure by 13.0% on average.
SBP increased in 13 patients (7.3% average increase across all patients) and DBP increased in 13 patients (5.5% average increase). Mean atrial pressure, which represents a weighted average between SBP and DBP, increased by 6.9% on average after TAVR, while increasing for 13 of the patients. Sustained increase in blood pressure after TAVR is often associated with better prognosis while decreased BP may be linked to less favourable prognoses80,81. Similarly, cardiac output increased by 9.9% on average (increased in 12 patients) and a 1.9% increase in resting heart rate was observed (increase in 12 patients—not shown in Fig. 4).
Coronary blood flow dynamics (local hemodynamics)
Coronary blood flow is crucial for delivering oxygen to the myocardium and is heavily governed by numerous physiological factors including cardiac output, heart rate, ventricular pressure, coronary perfusion pressure, vessel diameter, aortic valve area, disease status (such as AS or CAD) as well as other biological regulation factors82,83.
As there was patient-specific variation in many of these parameters (Fig. 4), there was also large individual variations in the impact of TAVR on coronary artery blood flow across the 3 branches (Fig. 5). Of the 19 patients, 7 had increases in coronary blood flow in all branches, 6 patients had decreases in all branches, while the remainder had increases and decreases in difference branches. Across all the patients, mean flow increased by 2.8% on average post-TAVR (5.4%, − 3.0% and − 0.1% for the LAD, LCX and RCA branches, respectively; N = 19). When broken down into the cardiac phases, the coronary blood flow increased by 17.5% post-TAVR during systole (15.7%, 22.6% and 14.3% for the LAD, LCX and RCA branches, respectively; N = 19) while decreasing by 7.1% during diastole (− 1.2%, − 7.6% and − 12.4% for LAD, LCX and RCA branches; N = 19).
Similar trends were observed for the peak coronary flow rate. After TAVR, there was an 8.4% increase during systole (3.8%, 6.8% and 14.5% LAD, LCX and RCA branches; N = 19) but a 11.1% decrease during diastole (-5.1%, -11.8% and -16.3% LAD, LCX and RCA branches; N = 19). Overall, we observed that the mean coronary blood flow rate was predominantly impacted during systole, whereas the peak coronary blood flow rate was primarily influenced during diastole.
Patient specific coronary hemodynamics
Coronary artery blood flow dynamics are impacted by various physiological factors and diseases82. For a computational tool to appropriately predict these waveforms, it must be able to capture the patient specific impacts between the various cardiac and circulatory interactions. Since the C3VM-LPM is designed to include not only the coronary arteries but also the pulmonary circulation, left atrium, mitral valve, aortic valve, ascending aorta and systemics circulation, it can simulate a portion of the cardiovascular system. Furthermore, it can provide a window to examine various aspects of the system in both the pre- and post-intervention setting for individual patients.
Figures 6, 7 and 8 illustrate patient specific cardiovascular data for various regions of the heart and coronary arteries in both the pre- and post-TAVR cases. Patients #18, #13 and #16 were selected to illustrate cases in which the procedure led to varying outcomes in coronary flow rates and cardiac dynamics.
Patient #18 was suffering from severe aortic stenosis prior to receiving a TAVR procedure, which had led to an increased burden on the left ventricle. After TAVR, the mean pressure gradient and max aortic valve velocity decreased and all the other predicted hemodynamic metrics increased, including myocardial blood flow. Following TAVR, the aortic valve area increased from 0.80 to 2.30 cm2 and the ejection fraction improved from 69 to 71%. Based on the model, the intervention led to an increase in peak LV pressure (+ 4.7%), an increase in the MAP (+ 35.2%), an increase in LV workload (+ 24.0%), an increase in cardiac output (+ 28.3%), and an increase in resting heart rate (+ 2.9%). Overall, an increase in the LAD (+ 31.1%), LCX (+ 32.4%) and RCA (+ 30.8%) flow rates were observed post-TAVR. Additionally, the total estimated myocardial blood flow (coronary blood flow per gram of cardiac mass) increased from 2.36 to 4.06 mL/min/g.
Patient #13 was also suffering from severe aortic stenosis prior to receiving TAVR. After TAVR, the mean pressure gradient, max aortic valve velocity, cardiac output, MAP, max LV pressure and myocardial blood flow all decreased while ejection fraction and resting heart rate increased. Similar to patient #18, the intervention increased the aortic valve area from 0.90 to 1.04 cm2 and the ejection fraction increased slightly from 60 to 64%. According to the model, the intervention led to a decrease in the peak LV pressure (− 21.8%), a decrease in LV workload (− 53.4%), a decrease in MAP (− 2.9%), an increase in resting heart rate (+ 9.1%) and a decrease in cardiac output (− 31.4%). The coronary flow in the LAD, LCX and RCA decreased by 22.5%, 20.7% and 85.7% after surgery, respectively. The total estimated myocardial blood flow also decreased from 2.42 to 2.39 mL/min/g.
Patient #16 suffered from the same condition and severity as the other subjects. After TAVR, the mean pressure gradient, max aortic valve velocity, ejection fraction, resting heart rate and max LV pressure decreased while cardiac output and MAP increased. Coronary blood flow rate increased while the overall myocardial blood flow increased slightly after TAVR. As with the other subjects, the aortic valve area increased after TAVR (0.5 to 0.9 cm2) and the ejection fraction remained relatively unchanged (64% to 62%). Interestingly though, even though the total coronary flow increased after TAVR (+ 21.5%), the total myocardial blood flow rate barely changed after the surgery (2.05 to 2.06 mL/min/g). This is likely due to the increase in the left ventricle mass index (77 to 93 g/m2) which may be a by-product of the increase in left ventricle work (1.06 to 1.37 J).
The examples illustrated by patients #18, #13 and #16 provide insight into the capabilities of the C3VM-LPM to compute patient specific cardiovascular data, including non-invasive insight into the hemodynamics in the coronary arteries. It also further highlights the patient specific nature of treating aortic stenosis and the resulting hemodynamics.
Discussion
As medicine becomes more patient centered, there is a strong motivation to create patient specific treatment approaches and design tools capable of capturing individual health data84. The union between computational science, medical imaging, and cardiology has opened the doors to numerous new patient specific cardiovascular tools. “Cardiology is flow”85 and providing clinicians with a non-invasive window into coronary blood flow and global cardiovascular parameters can be advantageous in helping clinicians and cardiologists make treatment decisions36,86,87. Furthermore, the development of computationally efficient methods to non-invasively quantify blood flow may be useful in high volume clinical settings.
In this paper, we develop a novel LPM which utilizes non-invasive inputs to simulate blood flow waveforms in the main proximal coronary branches (LAD, LCX and RCA) as well as other global cardiovascular hemodynamic parameters. The model was then applied to 19 patients undergoing TAVR to examine the impact of the procedure on various cardiovascular metrics. The coronary flow results from the computational model were compared with those from a patient specific 3D FSI model (n = 19) and a model sensitivity analysis was conducted.
Coronary blood flow increase or decrease varies in patients after TAVR
The coronary waveforms from the lumped model for patients with and without aortic stenosis were very consistent with the waveforms reported in literature70,83,88,89. For patients without aortic stenosis, a clear bi-phasic flow pattern was present with lower flow during systole and more flow occurring in diastole. In the presence of aortic stenosis, the blood flow during systole decreased considerably (in some cases resulting in zero or negative retrograde flow) and most of the blood flow was delivered to the coronaries in diastole. Garcia et al.70, Hongo et al.88 and others83,89 have observed very similar flow patterns in healthy and aortic stenosis cases.
After TAVR, the model yielded an increase in both the mean and peak flow rates during systole but a decrease during diastole. This trend has been observed in numerous other studies regarding the relationship between coronary flow and TAVR83,90,90,92. In patients with aortic stenosis, systolic blood flow from the ventricle can be limited due to the obstruction caused by the stenotic valve, thus limiting coronary flow. Additionally, the elevated LV pressure enhances the impact of extravascular compression, further restricting systolic coronary flow. After TAVR, the increase in valve orifice area and reduction in ventricular pressure leads to increased blood flow during systole, resulting in an increase in systolic coronary flow. Since aortic stenosis is a systolic phenomenon that impacts the opening rather than closing of the valve, TAVR has been shown to have a smaller impact on the diastolic phases and thus less impact on coronary flow during diastole90,91.
This study demonstrated individual differences in terms of coronary blood flow increase or decrease for the full cardiac cycle after TAVR. This varying outcome has been previously noted, for instance, Ben-Dor et al.83 found that of the 90 patients in their clinical study, only 48% had a ≥ 10% increase in their left main coronary flow velocity after TAVR. Relative reduction in coronary blood flow has been associated with various negative cardiovascular events including decreased ventricle contractile function, ventricular dysfunction and increased risk of ischemic events93,94. Furthermore, moderate or prolonged reduction in coronary blood flow may lead to molecular and morphological changes in the myocardium and may worsen heart failure93.
There is currently uncertainty around the optimal management and treatment of AS and coexisting CAD95. There is a current debate about whether CAD should be treated before AS, alongside the AS or after the AS19,91,96. Additionally, some preliminary research indicates that negative coronary events after TAVR may be driven by impaired coronary flow dynamics and coronary hypoperfusion related to the TAVR prosthesis19. Currently clinicians have relatively limited options to examine coronary flow hemodynamics in a rapid and non-invasive fashion16. By using computational models like the one presented in this paper, clinicians may eventually be able understand, quantify, and predict adverse coronary related events surrounding TAVR that otherwise might be missed without this additional data and insight.
Global hemodynamic metrics vary in patients after TAVR
The increase or decrease in certain computed global hemodynamic parameters (LV workload, SBP, DBP and CO) varies from subject to subject after TAVR. LV workload for instance decreased in 10 patients while increasing for 9 subjects after TAVR. While the workload often decreases post-TAVR due to a reduction in afterload31, this only occurred in a subset of our subjects. This observed increase in workload may be driven by the interplay of various cardiovascular factors such as the presence of mixed valvular disease including mitral valve regurgitation or post-TAVR complications such as paravalvular leakage (2 patients had mild and moderate to severe PVL respectively)30. In regard to blood pressure, according to our model SBP, DBP and MAP all increased in 68% of the subjects. Similarly, Perlman et al.81 found that of 150 subjects who underwent TAVR, 51% had sustained increases in blood pressure after the procedure. Interestingly, in this study, subjects with increased blood pressure after TAVR had better a long-term prognosis and fewer adverse events after 30 days and 12 months81. While there are some disagreements regarding the benefits and drawbacks of increased blood pressure after TAVR, various studies have found that blood pressure increase or decrease after TAVR is highly dependant on the individual80.
Unlike the other global metrics, aortic valve pressure gradient decreased in all but one subject after TAVR. Since implanting the new valve (and increasing the valve effective orifice area) is one of the main aims this procedure, it is expected that the valve pressure gradient would decrease after TAVR31,41. In all, due to the highly interconnected and dynamic nature of cardiovascular system, this patient specific variability in global hemodynamics can likely help explain why coronary blood flow increase or decrease after TAVR also varies.
Limitation of current LPMs to capture coronary blood flow
While there exist some LPMs developed for the coronary arteries61,62,68,97,97,98,100 very few include patient specific coronary and cardiac segments. In work by Duanmu et al.68, the authors use CT images to extract details of the coronary branches to tune the circuit elements but use generic heart functions as inputs to the coronary arteries. Li et al.61 also used a similar approach but tuned the model parameters to match generic coronary artery flow patterns for a single patient. Calderan et al.100 applied both an in-vivo model and lumped model to characterize the impact of TAVR on coronary artery flow but relied on semi-generic parameters and did not divide the blood flow into the 3 main coronary arteries. Currently, none of the existing pure LPMs can simulate and examine the impact of TAVR on coronary blood flow in a patient specific manner.
In recent years, most of the developments related patient specific computational cardiology models have made use of 3D based modelling (computational fluid dynamics, FSI, Lattice-Boltzmann and others). These powerful models can provide detailed insight into parameters such as wall shear stress, multi-dimensional blood flow patterns, vortical structures and other key parameters. On the other end of the spectrum, LPM offers a simpler and computationally cheaper method to simulate a series of global cardiovascular metrics and flow/pressure waveforms. While LPM sacrifices the ability to compute many of the 3D based parameters, it reduces the computational time from hours or days to seconds and makes model automation easier.
Limitations
This study was performed and validated using 19 patients and showed strong agreement with both the pre- and post-TAVR results from the 3D FSI models. Future studies must be conducted on a larger population of patients (both pre- and post-TAVR) with a considerable inter- and intra-patient variability with a broad range of diseases to further confirm the clinical findings of this study. Numerous FSI models have been previously shown to accurately simulate blood flow in the cardiovascular system, including the coronary arteries26,60,69,101. Furthermore, the cardiac LPM was previously designed to capture complex valvular, vascular, and ventricular diseases and has been previously validated against 49 patients with a wide range of diseases41. Nevertheless, future studies must consider validating the coronary flow waveforms from the model for both systole and diastole phases against invasive coronary catheter data.
As outlined in the analysis, the model is relatively sensitive to changes in coronary vessel cross sectional area, which is currently computed from 3D CT-based reconstructions. While a standard segmentation and reconstruction process is applied to all patients, it is currently done manually and is prone to a small degree of human error. This error could be reduced by using coronary CT angiography or standard angiography which produce higher quality coronary images.
The model is also sensitive to changes in mean arterial pressure, an input parameter currently obtained using a clinical grade sphygmomanometer. As coronary perfusion pressure (which is partially based on MAP) increases in healthy patients, the body naturally adjusts coronary resistance to help regulate the coronary blood flow rate77. Although it is not fully clear how this autoregulation is impacted by the presences of AS and CAD and only occurs for range of pressures, future models could be enhanced through the addition of patient specific control loops to further regulate the relationship between coronary pressure and flow.
References
Bourantas, C. V. & Serruys, P. W. Evolution of transcatheter aortic valve replacement. Circ. Res. 114, 1037–1051 (2014).
Carroll, J. D. et al. STS-ACC TVT registry of transcatheter aortic valve replacement. J. Am. Coll. Cardiol. 76, 2492–2516 (2020).
Elbaz-Greener, G. et al. Profiling hospital performance based on mortality after transcatheter aortic valve replacement in Ontario, Canada. Circ. Cardiovasc. Qual. Outcomes 11, e004947 (2018).
Mach, M. et al. Vascular complications in TAVR: Incidence, clinical impact, and management. J. Clin. Med. 10, 5046 (2021).
Ribeiro, H. B. et al. Coronary obstruction following transcatheter aortic valve implantation. JACC Cardiovasc. Interv. 6, 452–461 (2013).
Mentias, A. et al. Incidence and outcomes of acute coronary syndrome after transcatheter aortic valve replacement. JACC Cardiovasc. Interv. 13, 938–950 (2020).
Armijo, G., Nombela-Franco, L. & Tirado-Conte, G. Cerebrovascular events after transcatheter aortic valve implantation. Front. Cardiovasc. Med. 5, 104 (2018).
Eleid, M. Interventional management of paravalvular leak. Heart 104, 1797–1802 (2018).
Feldman, D. R. et al. Comorbidity burden and adverse outcomes after transcatheter aortic valve replacement. J. Am. Heart Assoc. 10, e018978 (2021).
O’Sullivan, C. J. & Wenaweser, P. Optimizing clinical outcomes of transcatheter aortic valve implantation patients with comorbidities. Expert Rev. Cardiovasc. Ther. 13, 1419–1432 (2015).
Dunbar, S. B. et al. Projected costs of informal caregiving for cardiovascular disease: 2015 to 2035: A policy statement from the American Heart Association. Circulation 137, e558–e577 (2018).
Cardiovascular diseases (CVDs). https://www.who.int/news-room/fact-sheets/detail/cardiovascular-diseases-(cvds).
Nai Fovino, L. et al. Coronary angiography after transcatheter aortic valve replacement (TAVR) to evaluate the risk of coronary access impairment after TAVR-in-TAVR. J. Am. Heart Assoc. 9, e016446 (2020).
Tarantini, G. & Nai Fovino, L. Coronary access and TAVR-in-TAVR. JACC Cardiovasc. Interv. 13, 2539–2541 (2020).
Kadem, M., Garber, L., Abdelkhalek, M., Al-Khazraji, B. K. & Keshavarz-Motamed, Z. Hemodynamic modeling, medical imaging, and machine learning and their applications to cardiovascular interventions. IEEE Rev. Biomed. Eng. 16, 403–423 (2023).
Adamson, P. D. & Newby, D. E. Non-invasive imaging of the coronary arteries. Eur. Heart J. 40, 2444–2454 (2019).
Ciampi, Q. et al. Functional, anatomical, and prognostic correlates of coronary flow velocity reserve during stress echocardiography. J. Am. Coll. Cardiol. 74, 2278–2291 (2019).
Blanken, C. P. S. et al. Coronary flow assessment using accelerated 4D flow MRI with respiratory motion correction. Front. Bioeng. Biotechnol. 9, 725833 (2021).
Faroux, L. et al. Coronary artery disease and transcatheter aortic valve replacement. J. Am. Coll. Cardiol. 74, 362–372 (2019).
Abdelkhalek, M. et al. Patterns and Structure of Calcification in Aortic Stenosis: An Approach on Contrast-Enhanced CT Images. JACC: Cardiovasc. Imag. https://doi.org/10.1016/j.jcmg.2023.02.011 (2023).
Keshavarz-Motamed, Z., Garcia, J. & Kadem, L. Fluid Dynamics of Coarctation of the Aorta and Effect of Bicuspid Aortic Valve. PLOS ONE 8(8), e72394. https://doi.org/10.1371/journal.pone.0072394 (2013).
Khodaei, S. et al. Personalized intervention cardiology with transcatheter aortic valve replacement made possible with a non-invasive monitoring and diagnostic framework. Sci. Rep. 11, 10888 (2021).
Khodaei, S. et al. Towards a non-invasive computational diagnostic framework for personalized cardiology of transcatheter aortic valve replacement in interactions with complex valvular, ventricular and vascular disease. Int. J. Mech. Sci. 202–203, 106506 (2021).
Primeaux, J., Salavitabar, A., Lu, J. C., Grifka, R. G. & Figueroa, C. A. Characterization of post-operative hemodynamics following the norwood procedure using population data and multi-scale modeling. Front. Physiol. 12, 603040 (2021).
Ceballos, A., Prather, R., Divo, E., Kassab, A. J. & DeCampli, W. M. Patient-specific multi-scale model analysis of hemodynamics following the hybrid norwood procedure for hypoplastic left heart syndrome: Effects of reverse Blalock-Taussig shunt diameter. Cardiovasc. Eng. Technol. 10, 136–154 (2019).
Vardhan, M. et al. Non-invasive characterization of complex coronary lesions. Sci. Rep. 11, 8145 (2021).
Mazzi, V. et al. Early atherosclerotic changes in coronary arteries are associated with endothelium shear stress contraction/expansion variability. Ann. Biomed. Eng. 49, 2606–2621 (2021).
Morris, P. D. et al. Computational fluid dynamics modelling in cardiovascular medicine. Heart 102, 18–28 (2016).
Mittal, R. et al. Computational modeling of cardiac hemodynamics: Current status and future outlook. J. Comput. Phys. 305, 1065–1082 (2016).
Keshavarz-Motamed, Z. et al. Mixed valvular disease following transcatheter aortic valve replacement: Quantification and systematic differentiation using clinical measurements and image-based patient-specific in silico modeling. J. Am. Heart Assoc. 9, e015063 (2020).
Ben-Assa, E. et al. Ventricular stroke work and vascular impedance refine the characterization of patients with aortic stenosis. Sci. Transl. Med. 11, eaaw0181 (2019).
Updegrove, A. et al. SimVascular: An open source pipeline for cardiovascular simulation. Ann. Biomed. Eng. 45, 525–541 (2017).
Arthurs, C. J. et al. CRIMSON: An open-source software framework for cardiovascular integrated modelling and simulation. PLOS Comput. Biol. 17, e1008881 (2021).
Taylor, C. A., Fonte, T. A. & Min, J. K. Computational fluid dynamics applied to cardiac computed tomography for noninvasive quantification of fractional flow reserve. J. Am. Coll. Cardiol. 61, 2233–2241 (2013).
Driessen, R. S. et al. Comparison of coronary computed tomography angiography, fractional flow reserve, and perfusion imaging for ischemia diagnosis. J. Am. Coll. Cardiol. 73, 161–173 (2019).
Holmes, J. W. & Lumens, J. Clinical applications of patient-specific models: The case for a simple approach. J Cardiovasc. Transl. Res. 11, 71–79 (2018).
Garber, L., Khodaei, S. & Keshavarz-Motamed, Z. The critical role of lumped parameter models in patient-specific cardiovascular simulations. Arch. Comput. Methods Eng. https://doi.org/10.1007/s11831-021-09685-5 (2021).
Tanné, D., Kadem, L., Rieu, R. & Pibarot, P. Hemodynamic impact of mitral prosthesis-patient mismatch on pulmonary hypertension: An in silico study. J. Appl. Physiol. 1985(105), 1916–1926 (2008).
Mynard, J. P., Davidson, M. R., Penny, D. J. & Smolich, J. J. A simple, versatile valve model for use in lumped parameter and one-dimensional cardiovascular models. Int. J. Numer. Methods Biomed. Eng. 28, 626–641 (2012).
Stergiopulos, N., Meister, J. J. & Westerhof, N. Determinants of stroke volume and systolic and diastolic aortic pressure. Am. J. Physiol. Heart Circ. Physiol. 270, H2050–H2059 (1996).
Keshavarz-Motamed, Z. A diagnostic, monitoring, and predictive tool for patients with complex valvular, vascular and ventricular diseases. Sci. Rep. 10, 6905 (2020).
Keshavarz-Motamed, Z., Garcia, J., Pibarot, P., Larose, E. & Kadem, L. Modeling the impact of concomitant aortic stenosis and coarctation of the aorta on left ventricular workload. J. Biomech. 44, 2817–2825 (2011).
Keshavarz-Motamed, Z., Edelman, E. R., Garcia, J., Dahdah, N. & Kadem, L. The role of aortic compliance in determination of coarctation severity: Lumped parameter modeling, in vitro study and clinical evaluation. J. Biomech. 48, 4229–4237 (2015).
Keshavarz-Motamed, Z. et al. Effect of coarctation of the aorta and bicuspid aortic valve on flow dynamics and turbulence in the aorta using particle image velocimetry. Exp. Fluids 55, 1696 (2014).
Keshavarz-Motamed, Z. et al. A new approach for the evaluation of the severity of coarctation of the aorta using Doppler velocity index and effective orifice area: In vitro validation and clinical implications. J. Biomech. 45, 1239–1245 (2012).
Benevento, E., Djebbari, A., Keshavarz-Motamed, Z., Cecere, R. & Kadem, L. Hemodynamic changes following aortic valve bypass: A mathematical approach. PLoS ONE 10, e0123000 (2015).
Baiocchi, M. et al. Effects of choice of medical imaging modalities on a non-invasive diagnostic and monitoring computational framework for patients with complex valvular, vascular, and ventricular diseases who undergo transcatheter aortic valve replacement. Front. Bioeng. Biotechnol. 9, 389 (2021).
Asaadi, M. et al. On left ventricle stroke work efficiency in children with moderate aortic valve regurgitation or moderate aortic valve stenosis. Pediatr. Cardiol. 43, 45–53 (2022).
Bahadormanesh, N. et al. A Doppler-exclusive non-invasive computational diagnostic framework for personalized transcatheter aortic valve replacement. Sci. Rep. 13, 8033. https://doi.org/10.1038/s41598-023-33511-6 (2023).
Khodaei, S., Abdelkhalek, M., Maftoon, N., Emadi, A., Keshavarz-Motamed, Z. Early detection of risk of neo-sinus blood stasis post-transcatheter aortic valve replacement using personalized hemodynamic analysis. Structural Heart. 100180. https://doi.org/10.1016/j.shj.2023.100180 (2023).
Bahadormanesh, N., Tomka, B., Kadem, M., Khodaei, S. & Keshavarz-Motamed, Z. An ultrasound-exclusive non-invasive computational diagnostic framework for personalized cardiology of aortic valve stenosis. Medical Image Analysis. 87, 102795 (2023).
Khodaei, S. et al. Long-term prognostic impact of paravalvular leakage on coronary artery disease requires patient-specific quantification of hemodynamics. Sci. Rep. 12, 21357. https://doi.org/10.1038/s41598-022-21104-8 (2022).
Keshavarz-Motamed, Z. et al. Elimination of transcoarctation pressure gradients has no impact on left ventricular function or aortic shear stress after intervention in patients with mild coarctation. JACC Cardiovasc. Interv. 9, 1953–1965 (2016).
Sadeghi, R., Khodaei, S., Ganame, J. & Keshavarz-Motamed, Z. Towards non-invasive computational-mechanics and imaging-based diagnostic framework for personalized cardiology for coarctation. Sci. Rep. 10, 9048 (2020).
Keshavarz-Motamed, Z. et al. Non-invasive determination of left ventricular workload in patients with aortic stenosis using magnetic resonance imaging and doppler echocardiography. PLoS ONE 9, e86793 (2014).
Sadeghi, R. et al. Reducing morbidity and mortality in patients with coarctation requires systematic differentiation of impacts of mixed valvular disease on coarctation hemodynamics. J. Am. Heart Assoc. 11, e022664. https://doi.org/10.1161/JAHA.121.022664 (2022).
Sadeghi, R., Gasner, N., Khodaei, S., Garcia, J. & Keshavarz-Motamed, Z. Impact of mixed valvular disease on coarctation hemodynamics using patient-specific lumped parameter and Lattice Boltzmann modeling. Int. J. Mech. Sci. 217, 107038 (2022).
Sadeghi, R. et al. Impact of extra-anatomical bypass on coarctation fluid dynamics using patient-specific lumped parameter and Lattice Boltzmann modeling. Sci. Rep. 12, 9718 (2022).
Mantero, S., Pietrabissa, R. & Fumero, R. The coronary bed and its role in the cardiovascular system: A review and an introductory single-branch model. J. Biomed. Eng. 14, 109–116 (1992).
Kim, H. J. et al. Patient-specific modeling of blood flow and pressure in human coronary arteries. Ann. Biomed. Eng. 38, 3195–3209 (2010).
Li, B., Wang, W., Mao, B. & Liu, Y. A method to personalize the lumped parameter model of coronary artery. Int. J. Comput. Methods 16, 1842004 (2019).
Mao, B. et al. Lumped parameter model based surgical planning for CABG. Med. Nov. Technol. Devices 2, 100014 (2019).
Yin, M., Yazdani, A. & Karniadakis, G. E. One-dimensional modeling of fractional flow reserve in coronary artery disease: Uncertainty quantification and Bayesian optimization. Comput. Methods Appl. Mech. Eng. 353, 66–85 (2019).
Tajeddini, F. et al. High precision invasive FFR, low-cost invasive iFR, or non-invasive CFR? Optimum assessment of coronary artery stenosis based on the patient-specific computational models. Int. J. Numer. Methods Biomed. Eng. 36, e3382 (2020).
Razminia, M. et al. Validation of a new formula for mean arterial pressure calculation: The new formula is superior to the standard formula. Catheter. Cardiovasc. Interv. 63, 419–425 (2004).
Zhou, Y., Kassab, G. S. & Molloi, S. On the design of the coronary arterial tree: A generalization of Murray’s law. Phys. Med. Biol. 44, 2929–2945 (1999).
Sankaran, S. et al. Patient-specific multiscale modeling of blood flow for coronary artery bypass graft surgery. Ann. Biomed. Eng. 40, 2228–2242 (2012).
Duanmu, Z., Yin, M., Fan, X., Yang, X. & Luo, X. A patient-specific lumped-parameter model of coronary circulation. Sci. Rep. 8, 874 (2018).
Coogan, J. S., Humphrey, J. D. & Figueroa, C. A. Computational simulations of hemodynamic changes within thoracic, coronary, and cerebral arteries following early wall remodeling in response to distal aortic coarctation. Biomech. Model. Mechanobiol. 12, 79–93 (2013).
Garcia, D. et al. Impairment of coronary flow reserve in aortic stenosis. J. Appl. Physiol. 106, 113–121 (2009).
Ofili, E. O. et al. Differential characterization of blood flow, velocity, and vascular resistance between proximal and distal normal epicardial human coronary arteries: Analysis by intracoronary Doppler spectral flow velocity. Am. Heart J. 130, 37–46 (1995).
Yushkevich, P. A. et al. User-guided 3D active contour segmentation of anatomical structures: Significantly improved efficiency and reliability. Neuroimage 31, 1116–1128 (2006).
Weller, H. G., Tabor, G., Jasak, H. & Fureby, C. A tensorial approach to computational continuum mechanics using object-oriented techniques. Comput. Phys. 12, 620–631 (1998).
Tuković, Ž, Karač, A., Cardiff, P., Jasak, H. & Ivanković, A. OpenFOAM finite volume solver for fluid-solid interaction. Trans. FAMENA 42, 1–31 (2018).
Khodaei, S., Fatouraee, N. & Nabaei, M. Numerical simulation of mitral valve prolapse considering the effect of left ventricle. Math. Biosci. 285, 75–80 (2017).
Khodaei, S. et al. Reducing long-term mortality post transcatheter aortic valve replacement requires systemic differentiation of patient-specific coronary hemodynamics. J. Am. Heart Assoc. 12, e029310. https://doi.org/10.1161/JAHA.123.029310 (2023).
Goodwill, A. G., Dick, G. M., Kiel, A. M. & Tune, J. D. Regulation of coronary blood flow. In Comprehensive Physiology (ed. Terjung, R.) 321–382 (Wiley, 2017). https://doi.org/10.1002/cphy.c160016.
Tran, J. S., Schiavazzi, D. E., Ramachandra, A. B., Kahn, A. M. & Marsden, A. L. Automated tuning for parameter identification and uncertainty quantification in multi-scale coronary simulations. Comput. Fluids 142, 128–138 (2017).
Baumgartner, H. et al. Recommendations on the echocardiographic assessment of aortic valve stenosis: A focused update from the European Association of Cardiovascular Imaging and the American Society of Echocardiography. Eur. Heart J. Cardiovasc. Imaging 18, 254–275 (2017).
Yeoh, J. & MacCarthy, P. The pressure is on: Implications of blood pressure after aortic valve replacement. J. Am. Heart Assoc. 8, e014631 (2019).
Perlman, G. Y. et al. Post-procedural hypertension following transcatheter aortic valve implantation. JACC Cardiovasc. Interv. 6, 472–478 (2013).
Ramanathan, T. & Skinner, H. Coronary blood flow. Contin. Educ. Anaesth. Crit. Care Pain 5, 61–64 (2005).
Ben-Dor, I. et al. Coronary blood flow in patients with severe aortic stenosis before and after transcatheter aortic valve implantation. Am. J. Cardiol. 114, 1264–1268 (2014).
Keshavarz-Motamed, Z., Del Alamo, J. C., Bluestein, D., Edelman, E. R. & Wentzel, J. J. Editorial: Novel methods to advance diagnostic and treatment value of medical imaging for cardiovascular disease. Front. Bioeng. Biotechnol. 10, 1501 (2022).
Richter, Y. & Edelman, E. R. Cardiology is flow. Circulation 113, 2679–2682 (2006).
Gray, R. A. & Pathmanathan, P. Patient-specific cardiovascular computational modeling: Diversity of personalization and challenges. J. Cardiovasc. Transl. Res. 11, 80–88 (2018).
Niederer, S. A., Lumens, J. & Trayanova, N. A. Computational models in cardiology. Nat. Rev. Cardiol. 16, 100–111 (2019).
Hongo, M. et al. Relation of phasic coronary flow velocity profile to clinical and hemodynamic characteristics of patients with aortic valve disease. Circulation 88, 953–960 (1993).
Hozumi, T. et al. Noninvasive assessment of significant left anterior descending coronary artery stenosis by coronary flow velocity reserve with transthoracic color Doppler echocardiography. Circulation 97, 1557–1562 (1998).
Ahmad, Y. et al. Coronary hemodynamics in patients with severe aortic stenosis and coronary artery disease undergoing transcatheter aortic valve replacement. JACC Cardiovasc. Interv. 11, 2019–2031 (2018).
Vendrik, J. et al. Long-term effects of transcatheter aortic valve implantation on coronary hemodynamics in patients with concomitant coronary artery disease and severe aortic stenosis. J. Am. Heart Assoc. 9, e015133 (2020).
Hildick-Smith, D. J. & Shapiro, L. M. Coronary flow reserve improves after aortic valve replacement for aortic stenosis: An adenosine transthoracic echocardiography study. J. Am. Coll. Cardiol. 36, 1889–1896 (2000).
Heusch, G. Myocardial ischemia: Lack of coronary blood flow, myocardial oxygen supply-demand imbalance, or what?. Am. J. Physiol. Heart Circ. Physiol. 316, H1439–H1446 (2019).
McConkey, H. Z. R. et al. Coronary microcirculation in aortic stenosis. Circ. Cardiovasc. Interv. 12, e007547 (2019).
Cangemi, S. et al. Management of concomitant coronary artery disease and aortic valve stenosis in the era of transcatheter aortic valve treatment. Mini-Invasive Surg. 6, 3 (2022).
Cavender, M. A. & Forrest, J. K. Planning for the next transcatheter aortic valve replacement starts today. Circ. Cardiovasc. Interv. 13, e010226 (2020).
Maasrani, M. et al. Simulations of fluxes in diseased coronary network using an electrical model. In The XIX International Conference on Electrical Machines-ICEM 2010 1–6 (2010)https://doi.org/10.1109/ICELMACH.2010.5608460
Mynard, J. P., Penny, D. J. & Smolich, J. J. Scalability and in vivo validation of a multiscale numerical model of the left coronary circulation. Am. J. Physiol. Heart Circ. Physiol. 306, H517–H528 (2014).
Pietrabissa, R., Mantero, S., Marotta, T. & Menicanti, L. A lumped parameter model to evaluate the fluid dynamics of different coronary bypasses. Med. Eng. Phys. 18, 477–484 (1996).
Calderan, J., Mao, W., Sirois, E. & Sun, W. Development of an in vitro model to characterize the effects of transcatheter aortic valve on coronary artery flow. Artif. Organs 40, 612–619 (2016).
Zhong, L. et al. Application of patient-specific computational fluid dynamics in coronary and intra-cardiac flow simulations: Challenges and opportunities. Front. Physiol. 9, 742 (2018).
Acknowledgements
This work was supported by NSERC Discovery Grant (RGPIN-2017-05349). NSERC (https://www.nserc-crsng.gc.ca/index_eng.asp) as the funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. The authors are highly thankful for the great comments of the two anonymous reviewers that helped us improve the quality of this article.
Author information
Authors and Affiliations
Contributions
L.G. Design, data collection and analysis, algorithm development (coronary LPM), interpretation of data, and manuscript writing; S.K. FSI modeling and development, data collection and analysis, interpretation of data, and manuscript writing; N.M. Optimization algorithm development (LPM), data analysis, critical revision; Z.K.M. Conception and design, data analysis, algorithm development (LPM), interpretation of data, critical revision, final approval of the manuscript and research supervision. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Garber, L., Khodaei, S., Maftoon, N. et al. Impact of TAVR on coronary artery hemodynamics using clinical measurements and image‐based patient‐specific in silico modeling. Sci Rep 13, 8948 (2023). https://doi.org/10.1038/s41598-023-31987-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-31987-w
- Springer Nature Limited