Abstract
Plant aquaporins (AQPs) play vital roles in several physiological processes. Plasma membrane intrinsic proteins (PIPs) belong to the subfamily of plant AQPs. They are further subdivided into two closely related subgroups PIP1s and PIP2s. While PIP2 members are efficient water channels, PIP1s from some plant species have been shown to be functionally inactive. Aquaporins form tetramers under physiological conditions. PIP2s can enhance the water transport of PIP1s when they form hetero-tetramers. However, the role of monomer-monomer interface and the significance of specific residues in enhancing the water permeation of PIP1s have not been investigated at atomic level. We have performed all-atom molecular dynamics (MD) simulations of homo-tetramers and four different hetero-tetramers containing ZmPIP1;2 and ZmPIP2;5 from Zea mays. ZmPIP1;2 in a tetramer assembly will have two interfaces, one formed by transmembrane segments TM4 and TM5 and the other formed by TM1 and TM2. We have analyzed channel radius profiles, water transport and potential of mean force profiles of ZmPIP1;2 monomers. Results of MD simulations clearly revealed the influence of TM4-TM5 interface in modulating the water transport of ZmPIP1;2. MD simulations indicate the importance of I93 residue from the TM2 segment of ZmPIP2;5 for the increased water transport in ZmPIP1;2.
Similar content being viewed by others
Introduction
Plant aquaporins constitute an important component in the superfamily of Major Intrinsic Proteins (MIPs)1,2. They are diverse and a large number of plant MIPs have been identified in several plants including Arabidopsis thaliana3, Zea mays4, Populus tricocarpa5, Oryza sativa6, Gossypium hirsutum7, Solanum lycopersicum8 and many others. Plant MIPs have been shown to be involved in several important physiological processes. They play a major role in regulating plant-water homeostasis9 and thus are instrumental in responding and adapting to various types of abiotic stress10,11. Aquaporins in plant root and shoot mediate tissue hydraulics and can impact transpiration in plants12,13,14. Key roles of plant aquaporins in other important plant-related function include nutrient transport, seed germination and emergence of lateral roots12,15,16. Apart from water, plant MIPs have been shown to transport diverse neutral solutes such as glycerol, carbon dioxide, hydrogen peroxide, urea, ammonia, silicic acid, arsenite and boron1,17,18. With large number of plant MIPs identified, phylogenetic analyses have contributed significantly to identify and understand the different subgroups within plants and characterize them19. Plant MIPs can be largely classified into five major groups: plasma membrane intrinisic proteins (PIPs), tonoplast intrinsic proteins (TIPs), nodulin 26-like intrinsic proteins (NIPs), small and basic intrinsic proteins (SIPs) and X-intrinsic proteins (XIPs)3,4,5. They differ in subcellular localization, transport properties and stress response2,20. Subcellular localization of several plant MIPs has been determined to be the plasma membrane (PIPs, XIPs and NIPs)21,22,23, tonoplast (TIPs)24, nodule (NIPs)25 and endoplasmic reticulum (SIPs)26. In terms of transport, NIPs have been shown to transport silicon and boron27,28. A few PIPs seem to be involved in carbon dioxide permeability29,30. TIP members facilitate urea and ammonia transport across the membrane31,32.
Three-dimensional structures of at least two plant MIPs have been determined. X-ray structures of spinach plasma membrane aquaporin SoPIP2;133 and tonoplast intrinsic protein from Arabidopsis thaliana AtTIP2;134 show that the plant aquaporins adopt a similar hourglass helical bundle fold found in other MIP superfamily members across the three kingdoms35. Under physiological conditions, MIP members form homotetramers with each monomer forming a functional channel.
Among the plant MIP subfamilies, PIP subfamily members are one of the most extensively studied group. They are highly conserved and are further classified into two groups phylogenetically, namely, PIP1s and PIP2s. Sequences of plant PIPs are highly conserved. For example, the sequence identity between PIP members of maize varies between 64 to 100%4. However, members belonging to PIP1 and PIP2 subgroup differ in many aspects including subcellular localization and transport properties. Among the two groups, mainly members belonging to PIP2 subgroup have been shown to be involved in water transport36,37. In the case of PIP1s, reports regarding their ability to transport water are not conclusive. While in some species they are shown to be efficient water channels13,38,39,40, other PIP1 members exhibit relatively low water transport41,42. In plants like maize, PIP1s do not seem to increase the osmotic water permeability coefficient (Pf) prompting the authors to conclude that these channels are non-functional43,44.
Several experimental studies have demonstrated that when PIP1 members are co-expressed with PIP2s, an increase in Pf is observed. This was first shown in maize PIP1 and PIP2 members. Fetter et al. concluded that PIP1 and PIP2 members physically interact with each other resulting in hetero-tetramerization of both isoforms45. Using confocal and FRET/fluorescent lifetime imaging microscopy, it has been shown that maize PIP2s help in relocalizing the PIP1s from endoplasmic reticulum (ER) to plasma membrane21. Interactions involving the C-terminal part of loop E and possible disulfide bond between monomers formed by a cystine residue from loop A are some of the regions/residues that could potentially impact the formation and stability of such hetero-oligomers45,46,47. The role of PIP1s as a modulator of membrane water permeability has also been demonstrated in PIPs of garden strawberry48.
To find out whether there is any preference in the stoichiometry of PIP1-PIP2 hetero-tetramers, BvPIP1;1 and BvPIP2;2 from Beta vulgaris have been co-expressed in Xenopus oocytes. It has been shown that all hetero-tetrameric configurations (3:1, 2:2, 1:3) exist and all produced active channels in plasma membranes with equivalent efficiency in transporting water49. Similarly, a large number of mutants have been generated for the Arabidopsis PIP2;1 channel and certain residues within and between monomers have been found to be important for the heteromer formation and for the trafficking of the protein from endoplasmic reticulum to plasma membrane50. Modeling studies involving ZmPIP1;2 and ZmPIP2;5 hetero-tetramers have identified residues occurring at the monomer-monomer interface51. Mutation of many of these interface residues either inactivates or activates the individual channels within the oligomeric assemblies. The role of specific residues at the monomer-monomer interface in the water transport and subcellular localization has been established in these mutagenesis studies.
Experimental studies have shown the importance of hetero-tetramer formation for the trafficking of PIP1 and PIP2 isoforms from ER to plasma membrane. Individual residues at the interface seem to have significant contribution in the heteromer formation and in the increased water transport of PIP1s. However, this phenomenon has not been investigated at atomic level. Oligomerization of water channels and glycerol facilitator and the role of specific residues have been investigated for several members of MIP channel family including AQP4, AQP11, GlpF and AQPcic52,53,54,55. However, when plant aquaporins like maize ZmPIPs form heterotetramers, then they can interact with two different adjacent monomers. ZmPIP1;2 s in hetero-tetramers have two interfaces, one involving the TM1-TM2 helical segments and the other formed by TM4-TM5 transmembrane helices. Previous experimental studies have reported the increase in water transport in PIP1s when they are part of hetero-tetramers with PIP2s56. In this paper, we have performed extensive molecular dynamics simulations of PIP1 and PIP2 tetramers in explicit lipid bilayers. We have investigated two types of tetramers: homotetramers of PIP1s and PIP2s and hetero-tetramers involving both the PIP1s and PIP2s with different stoichiometries. For each type of tetramer, we have analyzed the channel properties, water transport and inter-monomer interactions. Based on our results, we have also generated in silico mutants of residues at the interface and compared with the wild-type tetramers. Our studies demonstrate that the interface formed by TM4-TM5 region of PIP1 can modulate the water transport when it interacts with PIP2. However, the TM1-TM2 interface of PIP1 does not seem to influence the function of the channel even if it interacts with PIP2 in hetero-tetramers.
Results and Discussion
The mechanism of water permeation and glycerol selectivity has been investigated in aquaporin and aquaglyceroporin using molecular dynamics approach57,58,59. To investigate the differences in the water transporting properties of homo- and hetero-tetramers comprising PIP1 and PIP2 monomers, we have first performed molecular dynamics simulations of six oligomers with different combinations of ZmPIP1;2 and ZmPIP2;5 (Table 1). For each system, two independent simulations each for a period of 200 ns were carried out. Water permeation events, osmotic permeability, temporal channel radius profiles and potential of mean force are some of the properties analyzed to find the channel behavior of individual monomers. Analyses of interfacial contacts and essential dynamics motions were performed to understand the influence of neighboring monomers on the water transport. Table 1 summarizes the tetramers considered and the transport properties of both homo- and hetero-tetramers. Water permeation events and osmotic permeability of an individual monomer from two independent simulations for all the simulated systems are provided in the Supplementary Information (Figs S1 and S2). As reported in the experimental studies49, the homotetramers formed by ZmPIP1;2 resulted in the lowest water transport. This is evident from the average number of water permeation events and the osmotic permeability calculated by combining the two independent simulations and all monomers. When the same data was compared for the homotetramers of ZmPIP2;5, there is a significant increase in the water permeability, again agreeing with the previously reported experimental studies49. All four hetero-tetramers exhibit higher water permeability compared to the ZmPIP1;2 homo-tetramers. Water-transporting efficiency of two of the hetero-tetramers has surpassed even the ZmPIP2;5 homo-tetramers indicating that the ZmPIP1;2 in these oligomers are involved in higher water transport than that found in the homo-tetramers of ZmPIP1;2. The osmotic permeabilities of two of the ZmPIP2;5 heterotetramers (3:1 and 1:3) are comparable to the recently reported pf value of the water transporting channel AQP5 obtained from MD simulations60.
This brings into the question the capability of ZmPIP1;2 in transporting more water molecules when it is present as part of a hetero-tetramer in comparison to homo-oligomers. In the tetramer assembly, each monomer interacts with two adjacent monomers and hence has two interfaces. The transmembrane helices TM4 and TM5 form one interface while TM1 and TM2 form another interface through which interactions with the neighboring monomers take place (Fig. 1). In homotetramers, all the monomers are of the same type and hence the interfaces formed by them do not differ from one monomer to another. However in a hetero-tetramer, at least one monomer will have interfaces formed by two different PIP subtypes. We have investigated the transport properties of ZmPIP1;2 in both kinds of environments by considering the effects of neighboring interactions of monomers in homo- and hetero-tetramers.
ZmPIP1;2 homo-tetramer showing two different monomer-monomer interfaces formed by TM1-TM2 (orange) and TM4-TM5 (blue) segments. The monomer under consideration is shown in opaque and the other three monomers are displayed as transparent. The convention for naming the interfaces is explained in the main text. Unless otherwise stated, the molecular plots in this figure and subsequent figures were generated using VMD software81.
Interfaces of ZmPIP1;2 in homo- and hetero-tetramers
There are four possible interface pairs for any given ZmPIP1;2 monomer in a homo- or hetero-tetrameric configuration and they are as follows.
Type I
Both the interacting neighbors are ZmPIP1;2. In this case, the interfaces will be:
TM4-TM5(I)/TM1-TM2(I) and TM1-TM2(I)/TM4-TM5(I).
Transmembrane segments of monomer under consideration are depicted in bold and those of adjacent interacting neighbors are either shown in italics (when in the interface is formed with TM4-TM5 helices) or underlined (when the TM helices interact with TM1-TM2 segments). The Roman (I) or (II) indicates ZmPIP1;2 or ZmPIP2;5 respectively. This notation will be followed throughout the paper.
Type II
The TM4-TM5 helices of ZmPIP1;2 interacts with TM1-TM2 of ZmPIP2;5 while TM1-TM2 helices of ZmPIP1;2 interacts with the neighboring TM4-TM5 segments which is also ZmPIP1;2. The notation for the interface in this case is:
TM4-TM5(I)/TM1-TM2(II) and TM1-TM2(I)/TM4-TM5(I).
Type III
The TM4-TM5 helices of ZmPIP1;2 interact with TM1-TM2 of ZmPIP1;2 while TM1-TM2 helices of ZmPIP1;2 interact with the neighboring TM4-TM5 of ZmPIP2;5. The interfaces in this case will be denoted as:
TM4-TM5(I)/TM1-TM2(I) and TM1-TM2(I)/TM4-TM5(II).
Type IV
Both the interacting neighbors are ZmPIP2;5. The interfaces here are represented as:
TM4-TM5(I)/TM1-TM2(II) and TM1-TM2(I)/TM4-TM5(II).
For the populations of monomers with different types of interfaces described above, we have compared water permeation events, osmotic permeability, PMF profiles and channel radius profiles to find out the influence of interacting neighbors on water transport. Analyses of the monomers with different types of interfaces are discussed below.
ZmPIP1;2 monomers: Type-I category
All the monomers within the homo-tetramers of ZmPIP1;2 belong to Type-I category and they show minimum water transport (on an average only 14 water permeation events) amongst all the systems studied. The only other monomer with this type of interface is in the tetramer with 3:1 combination of ZmPIP1;2 and ZmPIP2;5 (Table 2). In this system, the adjacent interacting monomers are ZmPIP1;2 while the lone ZmPIP2;5 is located diagonal to this monomer. Overall, the 3:1 hetero-tetramer is one of the highest water-transporting systems with average number of water permeation nearly 98 and osmotic permeability 3.12 (Table 1). However, the monomer with Type-I interface in this system shows reduced permeation events and pf value indicating that the interacting interfaces from the neighboring monomers make it behave almost like a monomer in ZmPIP1;2 homo-oligomer. It provides the first evidence that the interfaces with the neighboring monomers influence the water transport. To further elucidate the factors responsible for the reduced water transport, we have plotted the temporal channel radius profiles calculated for the monomer under investigation. This property was compared with that of ZmPIP1;2 homo-tetramers which shows that the channel is severely constricted near the aromatic/arginine selectivity filter throughout the simulation time in the homo-oligomer (Fig. 2A). The same radius profile analysis of the monomer in the 3:1 system with the Type-I interface displays a profile similar to that of ZmPIP1;2 homotetramer showing that both ar/R selectivity filter and the region near the NPA motif are very narrow preventing the water molecules to pass these regions (Fig. 2B).
Temporal channel radius profiles of (A) ZmPIP1;2 homo-tetramer and (B) ZmPIP1;2 monomer from Type-I category in the 3:1 hetero-tetramer system. The point ‘0’ along the channel axis represents the NPA region. The ar/R selectivity filter is located at approximately 10 Ǻ. Each point along the channel axis is the average calculated from 2 ns bin for all the monomers considered. For example, for the homo-tetramer system, all four monomers from the two independent simulations (total 8 monomers) were considered and a point along the channel axis in this 2D-profile is an average over 8 monomers in a 2 ns bin at that time.
ZmPIP1;2 monomers: Type II category
There are two types of tetramers (3:1 and 2:2) in which a ZmPIP1;2 has interfaces that belong to Type II category. In this group of monomers, TM4-TM5 of ZmPIP1;2 interacts with TM1-TM2 of ZmPIP2;5 whereas the other interface is formed with another ZmPIP1;2 and there is one such monomer in both hetero-tetramers. The average water permeation events of the monomers of Type II group in 3:1 and 2:2 systems is the highest among all the monomers indicating that the PIP1:PIP2 interface of this type has a greater role in efficient water transport. The same is also reflected in the osmotic permeability (Table 2). This also explains as to why the overall water transport of both tetramers, 3:1 and 2:2, is higher than that of homotetramer 4:0. To further illustrate the increase in the water transport, we have plotted the temporal channel radius profiles calculated for both the monomers with the Type II interface from 3:1 and 2:2 tetramers (Fig. 3A). Although initially the channel was narrow in the ar/R selectivity filter region till 50 ns, it becomes wider for the rest of the simulation. This can explain why the monomers from the Type II group could conduct large number of water molecules across the channel.
Temporal channel radius profiles of ZmPIP1;2 monomers (A) Type II, (B) Type III and (C) Type IV categories from hetero-tetramers. The number of monomers used to generate the 2D channel radius profiles for each category is 4, 4 and 6 respectively for Type II, Type III and Type IV from two independent simulations. For all other details, see caption of Fig. 2 and Table 2.
ZmPIP1:2 monomers: Type III category
In this type, the TM1-TM2 side of the ZmPIP1;2 monomer under consideration interacts with the TM4-TM5 of ZmPIP2;5 while the other interface is formed with another ZmPIP1;2 monomer. Two monomers with 3:1 and 2:2 tetramers have interfaces that belong to Type III group and the average water permeation events in these monomers is only 49 which is similar to the monomer in 3:1 system with Type I interface. This indicates that the interface formed by the interaction of TM1-TM2 of ZmPIP1;2 with the TM4-TM5 of ZmPIP2;5 does not influence the water transport of the ZmPIP1;2 monomer. In contrast, the interface formed between the TM4-TM5 of ZmPIP1;2 and TM1-TM2 of ZmPIP2;5 has the greatest influence in increasing the efficiency of ZmPIP1;2’s water transport as observed in the monomers from Type II group. This is also evident from the temporal channel radius profiles of ZmPIP1;2 monomers that belong to Type III group from 3:1 and 2:2 systems (Fig. 3B). There will be clearly an energy barrier due to the narrow channel width (<1.0 Ǻ) near the ar/R selectivity filter region.
ZmPIP1;2 monomers: Type IV category
Three monomers belong to Type IV group among all the configurations investigated and are present in 2:2(d) and 1:3 tetramers. In this category, both neighbors of ZmPIP1;2 are ZmPIP2;5 and thus both TM4-TM5 and TM1-TM2 regions of ZmPIP1;2 interact respectively with TM1-TM2 and TM4-TM5 of ZmPIP2;5. Average water permeation of the three monomers from the two systems calculated from two independent simulations is about 134 during the simulation period. This is the second highest rate of water transport next to the ZmPIP1;2 monomers from Type II group. Corresponding pf value of 3.98 is also the second highest next only to the monomers belonging to Type-II category (Table 2). This again can be attributed to the interaction of TM4-TM5 side of ZmPIP1;2 with the TM1-TM2 region of ZmPIP2;5. Analysis of temporal channel radius profiles also illustrates that the channel is relatively wider in the ar/R selectivity filter region compared to that found for the monomers from Type I or Type III categories (Fig. 3C). This could explain why ZmPIP1;5 monomers from Type IV group conduct larger number of water molecules.
TM4-TM5 interfacial region of ZmPIP1;2 monomers seems to be important for regulating water transport
The above analyses clearly demonstrate that whenever the TM4-TM5 of ZmPIP1;2 interacts with TM1-TM2 of ZmPIP2;5, there is a significant increase in the water permeability of ZmPIP1;2. Hence, we combined the data from all the monomers from Type II and Type IV categories. The average and standard deviation of the number of water molecules transported through the ZmPIP1;2 monomers of Type II or Type IV group is 147 ± 115. When we compare the monomers of Type I or Type III category in hetero-tetramers, they transport 49 ± 43 water molecules. When the same analysis was performed on ZmPIP1;2 homotetramers, they transport on an average of only 14 water molecules. Since the data is not normally distributed, we performed Mann-Whitney U test to find whether the difference observed in the water transport between the three categories of monomers has any significance. The difference between the homotetramers and the monomers from Type II/Type IV group is statistically extremely significant with p value 0.00062. However, the number of water permeation events between homotetramers and the monomers of Type I/Type III category from hetero-tetramers does not show any significance with p value 0.139. This implies that the permeation behavior of Type I/Type III monomers is similar to that of homotetramers further confirming that TM4-TM5 interface plays a crucial role in modulating ZmPIP1;2 water transport. Temporal channel radius profiles consolidated for all the monomers from the two categories are shown in Fig. 4A and B. We can see that the Type I/Type III monomers and the monomers from homotetramers (Fig. 2A) have significant constriction near the ar/R selectivity filter. This constriction has largely disappeared in monomers from Type II/Type IV category.
Temporal channel radius profiles of ZmPIP1;2 monomers consolidated for (A) Type I/Type III and (B) Type II/Type IV categories from different hetero-tetramer systems. A total of 6 and 10 monomers were considered for Type I/Type III and Type II/Type IV respectively from two independent simulations. (C) Average PMF profiles calculated for ZmPIP1;2 monomers from homo-tetrameric system, ZmPIP1;2 monomers belonging to Type I/Type III and Type II/Type IV groups. The regions corresponding to the aromatic/arginine selectivity filter (SF) and the conserved NPA motif (NPA) are indicated.
A similar exercise was carried out for ZmPIP2;5 monomers as well. We have considered the ZmPIP2;5 monomers whose TM4-TM5 region interacted with TM1-TM2 of ZmPIP1;2. Average water permeation events were found to be 31 ± 29. For all the ZmPIP2;5 monomers whose TM4-TM5 region interacted with the TM1-TM2 surface of another ZmPIP2;5, the average number of transported water molecules is 86 ± 58. When the ZmPIP2;5 monomers from the homotetramers were considered, the water permeability is 64 ± 59. We found that the difference in the water permeability between the three groups is not significant (p > 0.01). This implies that there is no significant change in water permeation of ZmPIP2;5 whether it is present in a hetero-tetramer versus or homo-tetramer further implicating the regulatory role of TM4-TM5 interface in modulating the water transport applicable only to ZmPIP1;2.
To further demonstrate the importance of TM4-TM5 interface in the hetero-tetramers, we evaluated the potential of mean force (PMF) profiles of water transport for homo- and hetero-tetramers in which the TM4-TM5 interface of ZmPIP1;2 s interacts with TM1-TM2 of either ZmPIP2;5 or ZmPIP1;2. As explained above, there are three categories of ZmPIP1;2 monomers in the context of ZmPIP1;2’s transport efficiency; (i) ZmPIP1;2 monomers from Type II/Type IV group, (ii) ZmPIP1;2 monomers from Type I/Type III category and (iii) ZmPIP1;2 monomers within homo-oligomers. PMF profiles for all the three ZmPIP1;2 groups are plotted in Fig. 4C. Average PMF profile calculated for the ZmPIP1;2 monomers from Type I/Type III group exhibit a larger energy barrier near the NPA motif and also in the ar/R selectivity filter region. ZmPIP1;2 monomers from the homo-tetramers also display a large energy barrier in the ar/R selectivity filter region. However, PMF profile of ZmPIP1;2 monomers from Type II/Type IV group indicates that the energy barrier in the same selectivity region has come down by 2 to 2.5 kJ/mol. Unlike Type I/Type III ZmPIP1;2 monomers, there is no peak next to NPA region for ZmPIP1;2 monomers from Type II/Type IV group. Both the number of instances of water permeation and PMF profiles show that the ZmPIP1;2 monomers from Type II/Type IV category are more efficient in transporting water molecules. This analysis reiterates that the interface involving interactions of TM4-TM5 from ZmPIP1;2 with TM1-TM2 of ZmPIP2;5 plays a major role in regulating the water transport of ZmPIP1;2 monomers.
For the purpose of comparison, we also plotted the PMF profiles of ZmPIP2;5 monomers belonging to all three categories (Fig. S3 in Supporting Information). There is no major difference between the three types of ZmPIP2;5 monomers. This indicates that the interactions between ZmPIP1;2 and ZmPIP2;5 monomers in the hetero-tetramers at the TM4-TM5 interface of ZmPIP1;2 can enhance the water transport of ZmPIP1;2 monomers only and similar phenomena may be absent in ZmPIP2;5. Although the TM1-TM2 interface of ZmPIP1;2 can also have interactions with ZmPIP2;5, our simulation studies have unambiguously demonstrated that TM4-TM5 interface is more important in modulating the water transport properties of ZmPIP1;2 monomers when they form hetero-tetramers with ZmPIP2;5.
In silico mutants of residues at the TM4-TM5 interface
When we compared the sequences of ZmPIP1;2 and ZmPIP2;5, we found 64.4% sequence identity and 79.5% sequence similarity between these two sequences. The alignment in the TM1 and TM2 regions between these two sequences is shown in Fig. 5A. Five positions in the transmembrane helical segments at the monomer-monomer interfacial region exhibit differences between ZmPIP1;2 and ZmPIP2;5 sequences. We generated in silico mutants of ZmPIP2;5 substituting these five residues corresponding to those from ZmPIP1;2 in the heteromeric system 2:2(d). Two additional positions in the C-terminus of TM1 of ZmPIP2;5 were also mutated in this system to ascertain if the residues just outside the transmembrane region were also involved. The hetero-tetramer 2:2(d) was chosen for the mutant system so that one ZmPIP2;5 will be mutated and the other will be the wild-type ZmPIP2;5 and can serve as a control. The interfacial regions at the TM4-TM5 of ZmPIP1;2 interacting with ZmPIP1;2 and ZmPIP2;5 are shown in Fig. 5B and C respectively. We first substituted these seven interfacial residues of ZmPIP2;5 corresponding to that of ZmPIP1;2 and the starting structure of this mutant system is shown in Fig. 6A. In the wild-type 2:2(d) tetramer, both ZmPIP1;2s will have interface that can be classified as Type IV. In the mutant 2:2(d), one ZmPIP1;2 will have interface similar to Type-III monomer. We performed two independent MD simulations of this mutated system following the same protocol used to simulate wild-type homo- and hetero-tetramers. We calculated the number of water permeability events and pf for all the monomers. The ZmPIP1;2 with Type IV category interface transported on an average 168 water molecules while the ZmPIP1;2 which acquired Type III-like interface in the mutant system transported only an average of 26 water molecules. In the wild-type 2:2(d) system, the average number of water molecules transported by both ZmPIP1;2 members is 87 and is comparable to Type IV ZmPIP1;2 monomer in the mutant system. The ZmPIP1;2 with Type III-like interface behaved more like ZmPIP1;2s in wild-type homotetramer or Type I/Type III ZmPIP1;2 in wild-type hetero-oiligomers. The corresponding pf values for ZmPIP1;2 with Type IV and Type III-like interfaces are 3.90 and 1.98 respectively confirming that the transport property of ZmPIP1;2 in Type III-like interface is compromised.
(A) Pairwise sequence alignment of TM1 and TM2 helical segments along with the linker region are shown for ZmPIP1;2 and ZmPIP2;5. Residues that are at the interface and are different between the two sequences are marked. The transmembrane helical regions are indicated. The seven marked positions are mutated in the 2:2(d) heteromer system and the mutant oligomer was simulated to understand the influence of the interfacial residues. Molecular plots showing the interfaces formed by TM4-TM5 of ZmPIP1;2 with TM1-TM2 of (B) ZmPIP1;2 and (C) ZmPIP2;5 monomers. The helices of TM1 and TM2 are shown in green and pink for ZmPIP1;2 and ZmPIP2;5 respectively. Residues occurring at the monomer-monomer interface that are different between ZmPIP1;2 and ZmPIP2;5 are labeled and are shown in space-filling representation.
Initial configuration of two mutant systems. (A) One of the ZmPIP2;5 monomer (solid pink) in the 2:2(d) hetero-tetramer was mutated at 7 positions to mimic ZmPIP1;2 so that the adjacent ZmPIP1;2 monomer will have Type III-like interface. The mutated helix in ZmPIP2;5 is shown in solid green. (B) ZmPIP1;2 homo-tetramer with a single mutation of A103I at the TM2 position in one ZmPIP1;2 (solid green) is shown. All the wild-type monomers are shown transparent in green (ZmPIP1;2) or pink (ZmPIP2;5). The red and blue dots show the expected water permeation behavior of the corresponding monomers, with the red dot (Type I/Type III interface) indicating low expected permeation and the blue (Type II/Type IV interface) indicating high expected permeation.
We have also plotted the temporal channel radius profiles of both ZmPIP1;2 monomers in the mutant 2:2(d) system (Fig. S4 in Supporting Information). While the Type IV ZmPIP1;2 shows slight constriction in the ar/R selectivity filter region, the Type III-like ZmPIP1;2 is occluded right from the extracellular side up to the ar/R selectivity filter. This explains the poor conductivity of the Type III-like ZmPIP1;2 monomer. MD simulations of the system in which the interfacial residues of ZmPIP2;5 were mutated to that corresponding to ZmPIP1;2 reiterated that the TM4-TM5 interface of ZmPIP1;2 in a hetero-tetramer has a major role in modulating the water transport in ZmPIP1;2 channels.
Contacts between residues at the monomer-monomer interface
To investigate the structural basis for increased water permeation in ZmPIP1;2 monomers from Type II/Type IV group, we calculated the contacts between heavy atoms of the interacting monomers that are within 4 Ǻ distance and contact maps were generated as described in the Methods section. Interfaces formed by both the TM4-TM5 and TM1-TM2 regions of a monomer were considered for this purpose. Contact maps for the ZmPIP1;2 monomers in homotetramers (4:0) and ZmPIP1;2 monomers from Type II/Type IV category were generated (Fig. S5 in the Supporting Information) and were used to obtain the difference maps between the contacts formed by the two ZmPIP1;2 groups mentioned above (Fig. S6 in the Supporting Information). The most striking feature observed in the difference map obtained from ZmPIP1;2 homo-tetramer and the hetero-tetramer in which ZmPIP1;2s have the Type II/Type IV interface is due to the contacts formed by the residue Ile-93 from TM2 of ZmPIP2;5 (Fig. 7A). This residue is substituted by Ala (the equivalent position is Ala-103) in ZmPIP1;2. Ile-93 in ZmPIP2;5 participates in multiple contacts with the TM4-TM5 region of ZmPIP1;2 in the monomer-monomer interface. It shows enhanced interactions with Ile-190, Thr-194, Phe-220 and Ala-221 from the TM4-TM5 region of ZmPIP1;2 (Fig. 7A). Such extensive interactions are not possible for the small residue Ala. Based on the mutation studies, Yoo et al.50 have concluded that Ile-93 is important to stabilize the TM5 conformation at the monomer-monomer interface. However, they studied the importance of residues in tetramer formation of AtPIP2;1 homotetramers. The role of Ile-93 in influencing water transport in the hetero-tetramer environment remains to be elucidated.
(A) The residue I93 from TM2 of ZmPIP2;5 at the monomer-monomer interface exhibit enhanced interactions with several bulky residues (I190, I194 and F220) from TM4 of ZmPIP1;2 in hetero-tetramers belonging to Type II or Type IV category. Interacting residues are labeled and are displayed in stick representation. Only two of the interacting monomers in the tetrameric system are shown. (B) Average PMF profiles calculated for monomers of ZmPIP1;2 homo-tetramers, ZmPIP1;2 monomers of Type I category from the A103I mutant homo-tetramers and ZmPIP1;2 monomer which acquired Type II-like interface in the mutant homo-tetramer. The regions corresponding to the aromatic/arginine selectivity filter (SF) and the conserved NPA motif (NPA) are indicated in the figure. Temporal channel radius profiles of (C) Type I ZmPIP1;2 monomers and (D) ZmPIP1;2 monomer with Type II-like interface from two independent simulations of the mutant homo-tetramer systems.
To test the importance of Ile-93, we mutated Ala-103 in one of the ZmPIP1;2 monomers of the wild-type homotetramer to Ile (Fig. 6B). We performed two independent simulations using the same protocol as described in the Methods section. We examined the water permeability and calculated the pf values. We compared the transport properties of ZmPIP1;2 monomer whose TM4-TM5 region interacts with the TM1-TM2 of mutant ZmPIP1;2. Our results show that this ZmPIP1;2 monomer in contact with the mutant ZmPIP1;2 resulted in an average number of 226 water permeation events in the two simulations and a mean osmotic permeability of 6.2. In comparison with this monomer, the other wild-type monomers transported only 4 to 15 water molecules with the pf values ranging from 1.04 to 1.61. This is very similar to the ZmPIP1;2 s in the wild-type homotetramer system which transported, on an average, only 14 water molecules. To further consolidate the conclusions from this study, we have plotted PMF profiles of ZmPIP1;2 monomers from homotetramers and the three ZmPIP1;2 s from the mutant homotetramers (Fig. 7B) along with their temporal channel radius profiles (Fig. 7C and D). PMF profiles reveal that the large energy barrier found in the ZmPIP1;2 s of homotetramers and the two Type I category ZmPIP1;2 s of the mutant homotetramers at the ar/R selectivity filter region has drastically decreased in the ZmPIP1;2 whose TM4-TM5 forms the interface with the mutant ZmPIP1;2 in the mutant tetramer. The above observations are supported by the temporal channel radius profiles of ZmPIP1;2 monomers in the A103I mutant homotetramer. The two ZmPIP1;2 monomers with Type I interface show severe constriction near the ar/R selectivity filter (Fig. 7C) similar to that observed in ZmPIP1;2 wild-type homotetramer (Fig. 2A). However, the ZmPIP1;2 monomer whose TM4-TM5 region is in contact with the A103I mutant ZmPIP1;2 does not exhibit any such behavior and its ar/R selectivity region is wider (Fig. 7D). This enables this monomer to transport more number of water molecules similar to other Type II monomers. In summary, we have elucidated that a single mutation from Ala103 −>Ile at the monomer-monomer interface has a dramatic effect on the water permeation of the neighboring monomer with which it interacts at the monomer-monomer interface. Our in silico mutation studies have thus identified a key residue in ZmPIP2;5 which may be sufficient to enhance water permeation of neighboring ZmPIP1;2 monomers in a hetero-tetramer.
Essential dynamics of homo- and hetero-tetramers of PIP1 and PIP2
Essential Dynamics analysis, also known as Principal Component Analysis (PCA), captures the dominant modes of protein motion by transforming the high-dimensional protein motions into low-dimensional representations. Essential dynamics analysis of homotetramers and hetero-tetramers of ZmPIPs was performed as described in the Methods section. This analysis is to understand the factors at the molecular level that lead to ZmPIP1;2s in hetero-tetramers conducting high levels of water molecules. Results of MD simulation studies clearly implicated the monomer-monomer interface involving TM4-TM5 of ZmPIP1;2 for the high water permeability. To identify the biologically important motions in the PIP tetramers, we performed PCA on the ZmPIP1;2 monomers from homo-tetramers and ZmPIP1;2 monomers that belong to Type II/Type IV category in the heteromeric systems. Figure S7 (See Supporting Information) shows the cumulative contribution of eigenvectors to the overall motion of the protein. Eigenvectors describe the collective motions of the atoms and a small number of them are responsible for most of the protein dynamics. About 80% of the total mean square fluctuations can be described by the first 10 eigenvectors and the first eigenvector alone represents more than 40% of the total fluctuations. We visualized the direction and the extent of fluctuation in TM5 of ZmPIP1;2 using the first eigenvector (Fig. 8).
First eigenvectors, shown as arrows, depicting the direction of motion of TM5 (blue) for ZmPIP1;2 monomers from homo-tetramers viewed (A) parallel to the membrane and (B) down from the extracellular side. The direction of first principal component shown for TM5 (red) from ZmPIP1;2 monomers belonging to Type II/Type IV category viewed (C) parallel to the membrane and (D) down from the extracellular side.
In the case of ZmPIP1;2 s in homo-tetramer, the movement of TM5 is towards the center of the channel (Fig. 8A and B) while the TM5 of ZmPIP1;2 from Type II/Type IV group moves in parallel to the channel axis towards the extracellular side (Fig. 8C and D). This could explain why the channel radius profiles of ZmPIP1;2 s from homo-tetramers exhibit a pronounced constriction resulting in a narrow ar/R selectivity filter. Such narrow constriction makes the ZmPIP1;2 s in homo-tetramers poor water-conducting channels. However, we do not see the same behavior in ZmPIP1;2 s from Type II/Type IV group in which the TM4-TM5 regions have strong interactions with the TM1-TM2 region of ZmPIP2;5. Thus the essential dynamics analysis has helped to elucidate reasons for high water transport of ZmPIP1;2s that belong to Type II/Type IV category.
Conclusions
The biological significance of tetramer formation in the superfamily of major intrinsic proteins is an intriguing phenomenon that has been investigated experimentally. Although each monomer in the tetramer is a functional channel, the important question is whether the adjacent monomers have any influence on the transport properties of an individual channel within the tetramer assembly. Recently, molecular dynamics simulations have been performed on human AQP5 tetramers in which the influence of tetrameric state was investigated61. By simulating only single channels and comparing transport properties of tetramers, the authors observed that the pores of single channels are wider with much larger fluctuations. Their results indicate that the adjacent monomers might play a crucial role in regulating the water transport. Plant plasma intrinsic proteins (PIPs) have also been investigated using functional and mutational studies to address this specific issue. Although the PIP1s and PIP2s show very high sequence identity, the transport properties of PIP1s differ significantly from that of PIP2s. While PIP1 homo-tetramers are considered functionally inactive in some plant species, PIP2s are shown to be efficient water channels. However when present as part of hetero-tetramers, PIP1s become active and are involved in abundant water transport. What makes this transition for a PIP1 channel from inactive in a homo-tetramer to efficient water channels in hetero-tetramers has been the focus of many researchers. In the current study, we have carried out molecular dynamics simulations of homo- and hetero-tetramers of ZmPIP1;2 and ZmPIP2;5 with different stoichiometries and configurations and analyzed different properties including water permeation events, temporal channel radius profiles and PMF profiles. We focused on the two interfaces of ZmPIP1;2 formed by TM4-TM5 and TM1-TM2 helical segments. Their influences on water transport in both homo- and hetero-oligomers were examined. We clearly demonstrate that the interface formed by TM4-TM5 with ZmPIP2;5 in hetero-tetramer shows the greatest effect and results in dramatic increase in the number of water permeable events. The interface of ZmPIP1;2 formed by TM1-TM2 with ZmPIP2;5 does not produce the same effect and behaves very similar to PIP1s in homo-tetramers. Our MD simulation studies have offered a molecular explanation for the high water conductivity of PIP1s in hetero-oligomeric environment. We further demonstrated that the interface residues of ZmPIP2;5 in hetero-tetramer when substituted by those found in the equivalent positions in ZmPIP1;2 again resulted in reduced water transport. Furthermore, we have specifically identified a single residue, Ala-103, in ZmPIP1;2 which when mutated to the corresponding ZmPIP2;5 residue, Ile, has markedly increased the water transport in the adjacent ZmPIP1;2 channel. In other words, the interaction of ZmPIP1;2 residues at the TM4-TM5 interface with ZmPIP2;5 residues facilitates the ZmPIP1;2 channels to become active water transport channels. Essential dynamics analyses indicated important differences between hetero- and homo-tetramers in the movement of TM5 of ZmPIP1;2. We have thus demonstrated that the two monomer-monomer interfaces of ZmPIP1;2 are not the same and the TM4-TM5 interface when interacting with ZmPIP2;5 in hetero-oligomers is responsible for higher water transport and thus can modulate the water transporting properties of ZmPIP1;2s. Further experimental studies combined with simulation studies can help to understand whether this phenomenon is applicable to all PIPs from within the same species. Additionally, the universality of the role of TM4-TM5 in modulating the water transporting properties of PIP1s for all the plant species remains to be established.
Materials and Methods
Initial structures of homo- and hetero-tetramers of ZmPIP1;2 and ZmPIP2;5 channels
Since Chaumont and his colleagues used maize PIPs, ZmPIP1;2 and ZmPIP2;5, in their mutation studies to demonstrate that PIP1 transport is modulated by PIP251, we considered the sequences of the same maize PIPs. The UniProt62 accession IDs corresponding to ZmPIP1;2 and ZmPIP2;5 are Q9XF59 and Q9XF58 respectively. Experimental structures of 12 unique MIP channel structures have been determined from diverse species. MIP structures from different sources such as yeast, Escherichia coli, Plasmodium falsiparum, archaea, plants and mammals, exhibit a conserved hourglass helical fold35. Using homology modeling approach, we have constructed three-dimensional models of the monomers of more than 1400 MIP channels and these structural models are available from the MIPModDB database63. MIP homology models from diverse species were built using three template structures determined experimentally from E. coli (PDB ID: 1FX8), archaea (PDB ID: 2F2B) and bovine (PDB ID: 1J4N). Details of homology modeling protocols are described in detail in our earlier publications5,35,63,64,65,66. Homology models of ZmPIP1;2 and ZmPIP2;5 monomers were downloaded from MIPModDB database63. We also calculated the root mean square deviation (RMSD) of the models with the plant spinach aquaporin X-ray structures SoPIP2;1 (PDB IDs: 1Z98 and 2B5F) and they are found to be very close to the experimentally determined structures. RMSD between ZmPIP1;2 and ZmPIP2;5 models and the SoPIP2;1 crystal structures are between 0.7 to 0.8 Ǻ giving enough confidence to proceed with the modeled structures. MIP channels are found to exist as tetramers under physiological conditions. Hence, the same set of transformations that are used to generate the biological assembly of experimentally determined structures were applied on ZmPIP1;2 and ZmPIP2;5 monomer models to generate tetramers. This procedure was followed to obtain ZmPIP1;2 and ZmPIP2;5 homo- and hetero-tetramers with varying stoichiometries and configurations.
A total of six unique configurations were considered (Table 1). Two of them were homo-tetramers where all monomers were either ZmPIP1;2 or ZmPIP2;5. The remaining four consisted of different combinations of ZmPIP1;2 and ZmPIP2;5. Each tetramer thus generated was first energy minimized using GROMACS 4.5.667. We have also investigated mutants in which point mutations were introduced at the monomer-monomer interface. Dunbrack rotamer libraries68 and UCSF Chimera69 were used for this purpose.
Molecular dynamics simulations of ZmPIP1;2 and ZmPIP2;5 tetramers
Each of the six tetramers thus generated was first solvated in a pre-equilibrated POPE bilayer patch (400 POPE lipids)70 and we followed the protocol proposed by Kandt et al.71. Using this approach, we first expanded the pre-equilibrated POPE bilayer within XY plane and those lipids within a specific cut-off distance from the tetramer were deleted. The initial dimension was obtained by compressing the box size using a series of scaling steps followed by energy minimization. Berger lipid parameters72 and OPLS-AA force field for proteins73 were used for minimization and subsequent simulations. The version of Berger united atom force-field we used is compatible with the OPLS all atom force field (Dr. Bert de Groot, Personal Communication). The lipid-embedded systems were further solvated with TIP3P74 waters and neutralized with appropriate number of counter-ions. Each system was initially simulated for a period of 100 ps with NVT (constant number of atoms, volume and temperature) ensemble and harmonic restraints of 10000 kJ/mol/nm2 were imposed on protein atoms and headgroups of lipids. We carried out another 700 ps equilibration in seven stages and the lipid headgroup restraints were gradually removed during this time. Further equilibration of 1 ns was performed in NPT (constant number of atoms, pressure and temperature) ensemble by retaining the restraints on the protein atoms. Parinello-Rahman barostat75 was used to maintain a constant pressure of 1 bar. The systems were simulated at a temperature of 310 K and the temperature was maintained using Nose-Hoover coupling76. Finally, another 15 ns equilibration was carried out without any restraints. This was followed by the production run of 200 ns and all the analyses were performed on the trajectories generated during these production runs. Another independent simulation for each system for a period of 200 ns production run was performed by changing the initial velocities and following the same protocol. Thus a total of 2.4 μs (6 systems each simulated for a period of 200 ns and two independent simulations for each system) production runs were performed on six different tetramers of maize PIP aquaporins. Additionally, another 0.8 μs production runs were performed on the mutant systems of maize PIPs.
Potential of mean force (PMF) profiles of water permeation
PMF profiles of the permeation of water molecules for each system were calculated using the approach suggested by de Groot and Grubmuller59. Number of channel water molecules residing within the PIP monomers was found out from each MD simulated structure saved at every 10 ps using our in-house scripts. Probability distribution of water molecules was calculated for the entire 200 ns trajectory for each simulation. This information was used to calculate the PMF [Gi(z)] profile using the following equation:
where KB and T are respectively the Boltzmann constant and temperature and 〈ni(z)〉 is the average number of water molecules as a function of channel axis. We also calculated PMF profiles of more than one monomer of the same type (see below). In these cases, the MD trajectories of individual monomers were merged and the average PMF profile was calculated as described above.
Water permeation
The number of water permeation events and osmotic permeability (pf) were calculated to quantify the water transport of the PIP monomers. The positions of water molecules within the channel were ascertained every 1 ps. We generated bins for every 200 ps and calculated the mean-squared displacement for the water file which was then used to calculate the osmotic permeability (pf) as described by Zhu et al.77. The pf value was obtained from the diffusion constant using the following equation.
where vw is the volume of a single water molecule and Dn is the diffusion constant calculated using Einstein equation from the mean-squared displacement of the water file.
For each monomer, number of water permeation events was calculated by noting the number of water molecules which completely permeated the channel during the course of the simulation.
Temporal channel radius profiles
For all the simulated systems, channel radius profiles for all the monomers were calculated using the program HOLE78. HOLE typically calculates channel radius profile for a given channel protein and the radius profile can be plotted as a 1-dimensional diagram. In the present analysis, we calculated channel radius profiles by considering each monomer from the MD snapshot extracted every 10 ps. We have generated two-dimensional channel radius profiles in which the evolution of channel radius as the function of time is plotted at each point along the channel axis. The channel radius profiles were averaged over 2 ns bins at each point while generating the 2D-profile. We refer this as “temporal channel radius profile” reflecting the fact that the 2D-plot has information about time evolution of channel radius at points along the channel axis. We have also calculated the temporal channel radius profiles for a set of monomers having similar interfaces. In these cases, the averaging at each bin was done over all the trajectories of individual monomers. The 2D-profile thus generated was then plotted for the entire length of the simulations.
Contact maps
Distances between heavy atoms of interacting monomers that are part of the tetramers formed either by wild-type PIPs or in systems in which one of the PIP monomers was mutated in silico were calculated using the MDTraj Python module79. If the distance between two heavy atoms of interacting monomers is within 4.0 Ǻ during at least 70% of the simulation time, then these two atoms are assumed to have contacts. Contact maps were plotted by summing and normalizing the contacts between the transmembrane segments of interacting monomers. We have also generated contact difference maps to ascertain differences between the contacts formed by monomers which differ in the interfacial region.
Essential dynamics analysis
Essential dynamics analysis, also known as Principal Component Analysis (PCA), was performed on individual monomers using the built-in analysis tool of GROMACS. When we considered the monomers with the same type of interface, we concatenated their trajectories to perform PCA on the complete set. In each case, we observed that more than 90% of the motions were accounted by the first 10 principal components. The directions and the extent of fluctuations in the transmembrane segments of PIP1 were visualized using the extremea of the first principal components with the help of PyMol viewer80.
Data availability
All data generated or analysed during this study are included in this published article (and its Supplementary Information files).
References
Maurel, C., Verdoucq, L., Luu, D. T. & Santoni, V. Plant aquaporins: Membrane channels with multiple integrated functions. Annu. Rev. Plant Biol. 59, 595–624 (2008).
Maurel, C. et al. Aquaporins in plants. Physiol. Rev. 95, 1321–1358 (2015).
Johanson, U. et al. The complete set of genes encoding major intrinsic proteins in Arabidopsis provides a framework for a new nomenclature for major intrinsic proteins in plants. Plant Physiol. 126, 1358–1369 (2001).
Chaumont, F., Barrieu, F., Wojcik, E., Chrispeels, M. J. & Jung, R. Aquaporins constitute a large and highly divergent protein family in maize. Plant Physiol. 125, 1206–1215 (2001).
Gupta, A. B. & Sankararamakrishnan, R. Genome-wide analysis of major intrinsic proteins in the tree plant Populus tricocarpa: Characterization of XIP subfamily of aquaporins from evolutionary perspective. BMC Plant Biol. 9, Art. No. 134 (2009).
Sakurai, J., Ishikawa, F., Yamaguchi, T., Uemura, M. & Maeshima, M. Identification of 33 rice aquaporin genes and analysis of their expression and function. Plant Cell & Environ. 46, 1568–1577 (2005).
Park, W., Scheffler, B. E., Bauer, P. J. & Campbell, B. T. Identification of the familiy of aquaporin genes and their expression in upland cotton (Gossypium hirsutum L.). BMC Plant Biol. 10, Art. No. 142 (2010).
Reuscher, S., Akiyama, M., Mori, C., Shibata, D. & Shiratake, K. Genome-wide identification and expression analysis of aquaporins in tomato. Plos One 8, Art. No. e79052 (2013).
Chaumont, F. & Tyerman, S. D. Aquaporins: Highly regulated channels controlling plant water relations. Plant Physiol. 164, 1600–1618 (2014).
Sade, N. et al. Improving plant stress tolerance and yield production: is the tonoplast aquaporin SITIP2;2 a key to isohydric to anisohydric conversion? New Phytologist 181, 651–661 (2009).
Peng, Y., Lin, W., Cai, W. & Arora, R. Overexpression of a Panax ginseng tonoplast aquaporin alters salt tolerance, drought tolerance and cold acclimation ability in transgenic Arabidopsis plants. Planta 226, 729–740 (2007).
Peret, B. et al. Auxin regulates aquaporin function to facilitate lateral root emergence. Nature Cell Biol. 14, 991–998 (2012).
Postaire, O. et al. A PIP1 aquaporin contributes to hydrostatic pressure-induced water transport in both the root and rosette of Arabidopsis. Plant Physiol. 152, 1418–1430 (2010).
Maurel, C., Verdoucq, L. & Rodrigues, O. Aquaporins and plant transpiration. Plant Cell & Environ. 39, 2580–2587 (2016).
del Martinez-Ballesta, M. C., Silva, C., Lopez-Berenguer, C., Cabanero, F. J. & Carvajal, M. Plant aquaporins: New perspectives on water and nutrient uptake in saline environment. Plant Biol. 8, 535–546 (2006).
Gattolin, S., Sorieul, M. & Frigerio, L. Mapping of tonoplast intrinsic proteins in maturing and germinating Arabidopsis seeds reveals dual localization of embryonic TIPs to the tonoplast and plasma membrane. Mol. Plant 4, 180–189 (2011).
Mukhopadhyay, R., Bhattacharjee, H. & Rosen, R. P. Aquagyceroporins: Generalized metalloid channels. Biochim. Biophys. Acta 1840, 1583–1591 (2014).
Pommerrenig, B., Diehn, T. A. & Bienert, G. P. Metalloido-porins: Essentiality of nodulin 26-like intrinsic proteins in metalloid transport. Plant Sci. 238, 212–227 (2015).
Abascal, F., Iker, I. & Zardoya, R. Diversity and evolution of membrane intrinsic proteins. Biochim. Biophys. Acta 1840, 1468–1481 (2014).
Wudick, M. M., Luu, D.-T. & Maurel, C. A look inside: localization patterns and functions of intracellular plant aquaporins. New Phytologist 184, 289–302 (2009).
Zelazny, E. et al. FRET imaging in living maize cells reveals that plasma membrane aquaporins interact to regulate their subcellular localization. Proc. Natl. Acad. Sci. USA 104, 12359–12364 (2007).
Hanaoka, H., Uraguchi, S., Takano, J., Tanaka, M. & Fujiwara, T. OsNIP3;1, a rice boric acid channel, regulates boron distribution and is essential for growth under boron-deficient conditions. Plant J. 78, 890–902 (2014).
Bienert, G. P., Bienert, M. D., Jahn, T. P., Boutry, M. & Chaumont, F. Solanaceae XIPs are plasma membrane aquaporins that facilitate the transport of many uncharged substrates. Plant J. 66, 306–317 (2011).
Gattolin, S., Sorieul, M., Hunter, P. R., Khonsari, R. H. & Frigerio, L. In vivo imaging of the tonoplast intrinsic protein family in Arabidopsis roots. BMC Plant Biol. 9, Art. No. 133 (2009).
Kaldenhoff, R., Bertl, A., Otto, B., Moshelion, M. & Uehlein, N. Characterization of plant aquaporins. Methods Enzymol. 428, 505–531 (2007).
Ishikawa, F., Suga, S., Uemura, M., Sato, M. H. & Maeshima, M. Novel type aquaporin SIPs are mainly localied to the ER membrane and show cell-specific expression in Arabidopsis thaliana. FEBS Lett. 579, 5814–5820 (2005).
Mitani-Ueno, N., Yamaji, N., Zhao, F.-J. & Ma, J. F. The aromatic/arginine selectivity filter of NIP aquaporins plays a critical role in substrate selectivity for silicon, boron, and arsenic. J. Exp. Bot. 62, 4391–4398 (2011).
Wang, S. et al. Polar localization of the NIP5;1 boric acid channel is maintained by endocytosis and facilitates boron transport in Arabidopsis roots. Plant Cell 29, 824–842 (2017).
Uehlein, N., Sperling, H., Heckwolf, M. & Kaldenhoff, R. The Arabidopsis aquaporin PIP1;2 rules cellular CO2 uptake. Plant Cell & Environ. 35, 1077–1083 (2012).
Mori, I. C. et al. CO2 transport by PIP2 aquaporins of barley. Plant Cell Physiol. 55, 251–257 (2014).
Jahn, T. P. et al. Aquaporin homologues in plants and mammals transport ammonia. FEBS Lett. 574, 31–36 (2004).
Azad, A. K., Yoshikawa, N., Ishikawa, T., Sawa, Y. & Shibata, H. Substitution of a single amino acid residue in the aromatic/arginine selectivity filter alters the transport profiles of tonoplast aquaporin homologs. Biochim. Biophys. Acta 1818, 1–11 (2012).
Tornroth-Horsefield, S. et al. Structural mechanism of plant aquaporin gating. Nature 439, 688–694 (2006).
Kirscht, A. et al. Crystal structure of an ammonia-permeable aquaporin. PLos Biol. 14, Art. No. e1002411 (2016).
Verma, R. K., Gupta, A. B. & Sankararamakrishnan, R. Major intrinsic protein suprefamily: Channels with unique structural features and diverse selectivity filters. Methods Enzymol. 557, 485–520 (2015).
Chaumont, F., Barrieu, F., Jung, R. & Chrispeels, M. J. Plasma membrane intrinsic proteins from maize cluster in two sequence subgroups with differential aquaporin activity. Plant Physiol. 122, 1025–1034 (2000).
Secchi, F., Maciver, B., Zeidel, M. L. & Zwieniecki, M. A. Functional analysis of putative genes encoding PIP2 water channel subfamily in Populus trichocarpa. Tree Physiol. 29, 1467–1477 (2009).
Secchi, F. & Zwieniecki, M. A. The physiological response of Populus tremula x alba leaves to the down-regulation of PIP1 aquaporin gene expression under no water stress. Front. Plant Sci. 4, Art. No. 507 (2013).
Hu, W. et al. Overexpression of a wheat aquaporin gene, TaAQP8, enhances salt stress tolerance in transgenic tobacco. Plant Cell Physiol. 53, 2127–2141 (2012).
Wei, W. et al. HvPIP1;6, a barley (Hordeum vulgare L.) plasma membrane water channel particularly expressed in growing compared with non-growing leaf tissues. Plant Cell Physiol. 48, 1132–1147 (2007).
Liu, C. et al. Aquaporin OsPIP1;1 promotes rice salt resistance and seed germination. Plant Physiol. Biochem. 63, 151–158 (2013).
Suga, S. & Maeshima, M. Water channel activity of radish plasma membrane aquaporins heterologously expressed in yeast and their modification by site-directed mutagenesis. Plant Cell Physiol. 45, 823–830 (2004).
Ayadi, M., Cavez, D., Miled, N., Chaumont, F. & Masmoudi, K. Identification and characterization of two plasma membrane aquaporins in durum wheat (Triticum turgidum L. subsp. durum) and their role in abiotic stress tolerance. Plant Physiol. Biochem. 49, 1029–1039 (2011).
Yaneff, A., Vitali, V. & Amodeo, G. PIP1 aquaporins: Intrinsic water channels or PIP2 aquaporin modulators? FEBS Lett. 589, 3508–3515 (2015).
Fetter, K., Wilder, V. V., Moshelion, M. & Chaumont, F. Interactions between plasma membrane aquaporins modulate their water channel activity. Plant Cell 16, 215–228 (2004).
Bienert, G. P. et al. A conserved cysteine residue is involved in disulfide bond formation between plant plasma membrane aquaporin monomers. Biochem. J. 445, 101–111 (2012).
Jozefkowicz, C. et al. Loop A is critical for the functional interaction of two Beta vulgaris PIP aquaporins. PLoS One 8, Art. No. e57993 (2013).
Yaneff, A. et al. Heteromerization of PIP aquaporins affects their intrinsic permeability. Proc. Natl. Acad. Sci. USA 111, 231–236 (2014).
Jozefkowicz, C. et al. PIP water transport and its pH dependence are regulated by tetramer stoichiometry. Biophys. J. 110, 1312–1321 (2016).
Yoo, Y.-J. et al. Interactions between transmembrane helices within monomers of the aquaporin AtPIP2;1 play a crucial role in tetramer formation. Mol. Plant 9, 1004–1017 (2017).
Berny, M. C., Gillis, D., Rooman, M. & Chaumont, F. Single mutations in the transmembrane domains of maize plasma membrane aquaporins affect the activity of monomers within heterotetramer. Mol. Plant 9, 986–1003 (2017).
Takahashi, S. et al. The role of cysteine 227 in subcellular localization, water permeability, and multimerization of aquaporin-11. FEBS Openbio 4, 315–320 (2014).
Kitchen, P., Conner, M. T., Bill, R. M. & Conner, A. C. Structural determinants of oligomerization of the aquaporin-4 channel. J. Biol. Chem. 291, 6858–6871 (2016).
Lagree, V. et al. Oligomerization state of water channels and glycerol fcilitators: Involvment of loop E. J. Biol. Chem. 273, 33949–33953 (1998).
Trefz, M., Keller, R., Vogt, M. & Schneider, D. The GlpF residue Trp219 is part of an amino-acid cluster for aquaglyceroporin oligomerization and function. Biochim. Biophys. Acta, https://doi.org/10.1016/j.bbamem.2017.1010.1018 (2017).
Jozefkowicz, C., Berny, M. C., Chaumont, F. & Alleva, K. In Plant aquaporins: From Transport to Signaling (eds Chaumont, F. & Tyerman, S. D.) 29–46 (Springer International Publishing AG, 2017).
Tajkhorshid, E. et al. Control of the selectivity of the aquaporin water channel family by global orientational tuning. Science 296, 525–530 (2002).
Hub, J. S. & de Groot, B. L. Mechanism of selectivity in aquaporins and aquaglyceroporins. Proc. Natl. Acad. Sci. USA 105, 1198–1203 (2008).
de Groot, B. L. & Grubmuller, H. Water permeation across biological membranes: Mechanism and dynamics of aquaporin-1 and GlpF. Science 294, 2353–2357 (2001).
Wambo, T. O., Rodriguez, R. A. & Chen, L. Y. Computing osmotic permeabilities of aquaporins AQP4, AQP5, and GlpF from near-equilibrium simulations. Biochem. Biophys. Acta 1859, 1310–1316 (2017).
Janosi, L. & Ceccarelli, M. The gating mechanism of the human aquaporin 5 revealed by molecular dynamics simulations. Plos One 8, Art. No. e59897 (2013).
Consortium, T. U. UniProt: a hub for protein information. Nucleic Acids Res. 43, D204–D212 (2015).
Gupta, A. B. et al. MIPModDB: A central resource for the superfamily of major intrinsic proteins. Nucleic Acids Res. 40, D362–D369 (2012).
Bansal, A. & Sankararamakrishnan, R. Homology modeling of major intrinsic proteins in rice, maize and Arabidopsis: comparative analysis of transmembrane helix association and aromatic/arginine selectivity filters. BMC Struct. Biol. 7, Art. No. 27 (2007).
Verma, R. K., Prabh, N. D. & Sankararamakrishnan, R. New subfamilies of major intrinsic proteins in fungi suggest novel transport properties in fungal channels: Implications for the host-fungal interactions. BMC Evol. Biol. 14, Art. No. 173 (2014).
Verma, R. K., Prabh, N. D. & Sankararamakrishnan, R. Intra-helical salt-bridge and helix destabilizing residues within the same helical turn: Role of functionally important loop E half-helix in channel regulation of major intrinsic proteins. Biochim. Biophys. Acta 1848, 1436–1449 (2015).
Pronk, S. et al. GROMACS 4.5: a high-throughput and highly parallel open source molecular simulation toolkit. Bioinformatics 29, 845–854 (2013).
Dunbrack, R. L. & Karplus, M. Backbone-dependent rotamer library for proteins. Application to side-chain prediction. J. Mol. Biol. 230, 543–574 (1993).
Pettersen, E. F. et al. UCSF Chimera - a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Tieleman, D. P. & Berendsen, H. J. C. A molecular dynamics study of the pores formed by Escherichia coli OmpF porin in a fully hydrated palmitoyloleoylphosphatidylcholine bilayer. Biophys. J. 74, 2786–2801 (1998).
Kandt, C., Ash, W. L. & Tieleman, D. P. Setting up and running molecular dynamics simulations of membrane proteins. Methods 41, 475–488 (2007).
Berger, O., Edholm, O. & Jahnig, F. Molecular dynamics simulations of a fluid bilayer of dipalmitoylphosphatidylcholine at full hydration, constant pressure, and constant temperature. Biophys. J. 72, 2002–2013 (1997).
Jorgensen, W. L., Maxwell, D. S. & Tirado-Rives, J. Development and testing of the OPLS all-atom force field on conformational energetics and properties of organic liquids. J. Am. Chem. Soc. 118, 11225–11236 (1996).
Jorgensen, W. L., Chandrasekhar, J., Madura, J. D., Impey, R. W. & Klein, M. L. Comparison of simple potential functions for simulating liquid water. J. Chem. Phys. 79, 926–935 (1983).
Parrinello, M. & Rahman, A. Polymorphic transitions in single crystals: A new molecular dynamics method. J. Appl. Phys. 52, 7182–7190 (1981).
Cheng, A. & Merz, J. K. M. Application of Nose-Hoover chain algorithm to the study of protein dynamics. J. Phys. Chem. 100, 1927–1937 (1996).
Zhu, F., Tajkhorshid, E. & Schulten, K. Collective diffusion model for water permeation through microscopic channels. Phys. Rev. Lett. 93, 224501 (2004).
Smart, O. S., Neduvelil, J. G., Wang, X., Wallace, B. A. & Sansom, M. S. P. HOLE: A program for the analysis of the pore dimensions of ion channel structure models. J. Mol. Graph. 14, 354–360 (1996).
McGibbon, R. T. et al. MDTraj: A modern open library for the analysis of molecular dynamics trajectories. Biophys. J. 109, 1528–1532 (2015).
The PyMol Molecular Graphics System, Version 1.6 Schrodinger, LLC.
Humphrey, W., Dalke, A. & Schulten, K. VMD: Visual molecular dynamics. J. Mol. Graph. Model. 14, 33–38 (1996).
Acknowledgements
We gratefully acknowledge the High Performance Computing Facility at IIT-Kanpur funded by DST and MHRD, Government of India. We thank all our lab members for useful discussions.
Author information
Authors and Affiliations
Contributions
R.S. conceived the research project; R.S., M.V. and M.M. designed the project; M.V. and M.M. performed the simulations; M.V., M.M. and R.S. analyzed the results; R.S. wrote the article with contributions from M.V. and M.M. All authors approved the final version of the manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Vajpai, M., Mukherjee, M. & Sankararamakrishnan, R. Cooperativity in Plant Plasma Membrane Intrinsic Proteins (PIPs): Mechanism of Increased Water Transport in Maize PIP1 Channels in Hetero-tetramers. Sci Rep 8, 12055 (2018). https://doi.org/10.1038/s41598-018-30257-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-30257-4
- Springer Nature Limited
This article is cited by
-
Current perspectives of ACR3 (arsenite efflux system) toward the reduction of arsenic accumulation in plants
Journal of Crop Science and Biotechnology (2024)
-
Molecular modeling of aquaporins and artificial transmembrane channels: a mini-review and perspective for plants
Theoretical and Experimental Plant Physiology (2023)
-
Differential regulation of drought stress by biological membrane transporters and channels
Plant Cell Reports (2021)
-
Arbuscular mycorrhizal symbiosis regulates the physiological responses, ion distribution and relevant gene expression to trigger salt stress tolerance in pistachio
Physiology and Molecular Biology of Plants (2021)