Abstract
This study investigates the in vivo cytotoxicity of ZnO nanoparticles synthesized at industrial scale with embryonic Zebrafish. Industrial synthesis of ZnO nanoparticles was mimicked at lab scale by high energy ball milling technique by milling bulk ZnO particles for 15 h. Synthesized 7 h and 10 h ZnO nanoparticles showed significant alteration of size, zeta potential and optical properties in comparison to Bulk ZnO. Mortality and hatching rate in Zebrafish embryos were influenced by these alterations. Size and charge dependent effect of ZnO nanoparticles exposure on physiology and development of Zebrafish embryos were evident by malfunctioned organ development and abnormal heartbeat rate. Similar dependency on quenching of ROS due to influential hydrogen bond interaction with glycine residue of Sod1 oxidative stress protein and increased apoptosis were observed in cells. The study revealed the mechanism of cytotoxicity in exposed embryonic Zebrafish as an effect of accumulation and internalization inside cells instigating to generation of hypoxic condition and interference with the normal adaptive stress regulation signaling pathways leading towards enhanced apoptosis. The study revealed hidden size and charge dependent in vivo cytotoxicity mechanism of ZnO nanoparticles in Zebrafish embryos insight of the environmental and clinical importance of attention on industrially synthesized ZnO nanoparticles.
Similar content being viewed by others
Introduction
ZnO nanoparticles have been recognized as one of the most attentive nanoparticles in last few decades of nanotechnology science. It has got this reputation because of its peculiar physiochemical properties1,2,3,4 and wide aspects of applications including production of wave fitters, UV detectors, catalysis, paint, transparent conductive field, cosmetics, gas sensors, antibacterial agent and microelectronics5,6,7,8,9,10. It has also been used as important constituents in products like personal care products (toothpaste, beauty products and sunscreen)11,12 and textiles products13,14. Moreover, it has been reported as a potent applicant in medicine for infectious15,16,17,18 and non-infectious diseases19. With this extensive usage of these nanoparticles, much efforts and research have been done by researchers to synthesize ZnO nanoparticles with application based properties16,20,21,22. It has been established that different forms of nano ZnO can be synthesized by controlling the different synthesis parameters23. Many researchers have discovered and established different methods and route for synthesis of different types of ZnO nanoparticles. Some of the reported methods includes chemical methods24,25, physical methods26,27,28,29 and biological techniques30,31,32. Efforts by chemical route has been made on synthesis of ZnO nanoparticles with desired physiochemical properties33 while biological synthesis has been implicated for formation of biocompatible nanoparticles34. For large scale synthesis in industrial application physical route has been preferred. Physical route of nano ZnO synthesis includes use of physical factors like heat35,36,37, mechanical force etc. Among these various techniques mechanical route of synthesis is most popular and commonly called as “High energy ball milling (HEBM)” technique38,39. HEBM has been reported as an important technique for synthesizing ZnO nanoparticles in industrial scale without involving any complex chemical synthesis38. Advantage of HEBM over other reported methods has been proved in terms of simplicity, reliability and reproducibility40,41. It has been proved to induce rare chemical reaction at room temperature41. Moreover it has been reported to induce changes in electrical and optical properties along with morphological and structural alterations. Due to this high reliability and perfectness, HEBM technique is used in industries for large scale production of nanoparticles.
With increase in extensive usage of ZnO nanoparticles, concerned have risen for their eco-toxicological and toxicological effects. Studies have been done to investigate the in vitro cytotoxic effect of ZnO and other metallic nanoparticles in different mammalian cell line system to discover and illustrate the mechanism of cytotoxicity42,43,44,45,46. It has been reported that ZnO and other metallic nanoparticles exhibit cytotoxicity47 and genotoxicity48 in different cells by enhancing ROS production49,50,51 and alternating the different metabolism leading to DNA damage52,53,54, malfunctioning of cell organelles55,56 and ultimately their death. In vivo cytotoxicity has also been investigated through different animal models like Zebrafish and Mouse57,58,59. It has been stated that cytotoxicity of Zinc oxide nanoparticles is dependent on their shape, size and other physiochemical properties and it affects the morphological development and cellular metabolism in Zebrafish and mice59,60. These investigation reports are based upon the testing of ZnO nanoparticles prepared at lab scale through different methods. However, information about the cytotoxicity and genotoxicity of ZnO nanoparticles synthesized at industrial scale is still not mentioned anywhere. With this study, we have tried to fill that information gap by investigating those effects for the first time. ZnO nanoparticles were prepared by HEBM technique as prototype of industrial scale synthesis and their in vivo cytotoxicity was investigated for the first time to show their impact in real case.
Zebrafish (Danio rerio) has been considered as one of the most potential model organism for toxicity of assessment of nanoparticles in last few years. Developing Zebrafish embryos has been proved to be perfect live model for investigation of effect of any pollutant or nanoparticles because of its transparency and fast life cycle61,62. Moreover it is easy to maintain at laboratory with cost effectiveness as compared to other models. Toxicity reports for any nanoparticles exposed to embryo zebrafish can be considered to mimic their effect on human because of their genetic and physiological similarities with human63,64. Many literatures have reported in vivo cytotoxicity assessment of different engineered nanoparticles through Zebrafish model65,66,67. Moreover, toxicity assessment in Zebrafish model can be beneficial in duel way by considering the reports for ecological assessment as well as for human health.
The goal of this study is to explore the physiochemical changes in industrially prepared ZnO nanoparticles and investigate consequent effect of their exposure on living cells especially to aquatic animals. ZnO nanoparticles were synthesized in lab scale by HEBM technique considering it as a prototype of industrial method. In vivo cytotoxicity of synthesized ZnO nanoparticles was determined at cellular and physiological level with the help of Zebrafish model and the probable mechanism was discussed insight of experimental and computational observation and previous reports.
Materials and Methods
Synthesis of ZnO nanoparticles
Synthesis of Zinc Oxide (ZnO) nanoparticles were done by milling Bulk Zinc Oxide powder (Merck) in planetary High Energy ball Milling (Retsch, PM400) using tungsten carbide (WC) jar (250 ml) and WC ball (10 mm) at 300 rpm with ball to powder ratio 20:1 in ambient atmosphere from 0 to 10 h. For cytotoxicity analysis, suspension of Bulk ZnO, 7 h and 10 h milled ZnO nanoparticles was prepared in Holtfreter medium (HF)68 by sonication at amplitude of 50 for 5 minutes with no pulse.
Characterization of synthesized ZnO nanoparticles
Characterization for physiochemical properties of synthesized ZnO nanoparticles were performed by standard techniques. Size and shape of the ZnO nanoparticles were determined by visualization with Field emission scanning electron microscope (FESEM). For imaging, ZnO nanoparticles were suspended in HF medium by sonication and air dried on a silicon substrate. Imaging was performed using a Carl Zeiss, Neon 40 microscope at 20KV equipped with EDS (Inca, Oxford). Structural analysis was performed by XRD techniques using an X-ray diffractometer (X-PERT- PRO, Pan Analytical) with CuKα radiation (λ = 0.15418 nm) over wide range of angle of 15° to 75°. The average size of the milled ZnO nanoparticles was calculated from X-ray peak broadening using Voigt peak profile analysis, after eliminating the instrumental broadening and strain contribution. Size and stability of ZnO nanoparticles in HF medium was tested by measuring their hydrodynamic diameter and zeta potential with the help of Dynamic light scattering (Zetasizer nanoseries, Malvern, UK). Optical properties of ZnO nanoparticles were determined by UV-Vis spectroscopy measuring optical density at a range of 300–800 nm.
Zebrafish maintenance and embryo culture
All animal procedures were approved by the relevant guidelines of Institutional Animal Ethics Committee (IAEC) of KIIT University. All experiments were performed in accordance with relevant animal practice guidelines and regulations of IAEC, KIIT University. Maintenance of adult Zebrafish (Danio rerio) was done in overflow container setup supplied by Aquaneering, USA. The setup was equilibrated with fish water (75 g NaHCO3, 18 g sea salt, 8.4 g CaSO4 per 1000 ml). Feeding of fishes was done thrice a day with fish food containing bloodworm. Embryos were obtained by breeding male and female placed in setup box containing net partition in a ratio of 2:1. 12 h light and 12 h dark were maintained for photoperiods. The eggs were spawned after 2 hour after removing the partition. Viable eggs were collected and rinsed with Holtfreter (HF) medium. Embryos were maintained in HF medium for further experiments. All the chemicals used for preparing buffer were purchased from Sigma Aldrich.
Embryo and larvae cytotoxicity assays
All protocols were approved by relevant guidelines of IAEC of KIIT University. Embryos of 3–3.5 hour post fertilization (hpf) at blastula stage were selected for different toxicity assays. Toxicity assays conducted with Zebrafish embryo exposed to synthesized ZnO nanoparticles were performed by protocol mentioned by Scholz et al.69. Zebrafish embryos were treated with different concentration of Bulk and ZnO nanoparticles for 96 h in 24 wells plate containing HF buffer. The experimental set up was exposed to photoperiod of 14/10 h light/dark at 28 ± 1 °C. Untreated embryos were taken as control. Morphological changes were observed by direct observation with stereomicroscope. Hatching rate was determined as number of embryos hatched by 96 h post fertilization as compared to untreated group. Survivability rate was expressed as number of live embryos after 96 h post fertilization as compared to untreated group. Heart rate was calculated for each group by counting. All the experiments were performed in triplicates and repeated thrice.
Examination of cellular reactive oxygen species (ROS)
To determine the mechanism underlying synthesized ZnO nanoparticle toxicity intracellular ROS was investigated. Intracellular ROS was measured by flow cytometry and Fluorescent microscopy using 2,7-dichlorodihydrofluorescein diacetate (H2DCFDA) fluorescent dye (Sigma, Aldrich) which is a permanent ROS marker70. Untreated and 50 µg/ml of Bulk, 7 h and 10 h ZnO nanoparticles treated 96 h hatched embryos were washed with HF buffer and stained with H2DCFDA for 20 min in dark. The fluorescence was observed with microscope at green channel and images were taken. For flow cytometry analysis, live hatched embryos were sacrificed and single suspension of cells was prepared by sonication. Then, cell suspension was stained with 1.25 mg/l H2DCFDA dye for 20 min in dark followed by washing with 1X phosphate buffer solution. The cells were subsequently analyzed by flow cytometry using Attune acoustic focusing cytometer (Applied Biosystems, Life technologies) equipped with 488 nm argon laser. The data were analyzed in facsxpress 5 (Denovo, CA) and presented as histogram. All the experiments were performed in triplicates and significance was calculated using Graph pad prism6.
In silico analysis of ZnO-oxidative stress protein interaction
In order to determine the interaction of oxidative stress proteins with ZnO nanoparticles, in silico approach was taken. Molecular docking was performed using ZnO as ligand and sod1 protein molecule as receptor protein. Molecular docking studies were carried out using Auto Dock Vina 4.271 Blind Docking was performed with the Grid Box cube of 40 and spacing of 1 with the x, y, and z centers as −24.301, 49.934, 3.896. Preparation of protein was carried out using these parameters and by adding Kollman charges72 and merging non-polar hydrogen atoms. The ligands were prepared using Autodock by applying Gasteiger charges and merging non-polar hydrogen atoms. 9 poses were generated for each ligand based on the best-suited orientation of the molecule. The molecular docking scores of sod1 with ZnO were tabulated. The hydrogen-bonding patterns were visualized using Chimera and Ligplot+ 73.
Acridine orange staining for apoptosis analysis
Analysis of Apoptosis in 96 h zebrafish embryo exposed to 50 µg/ml Bulk,7 h and 10 h ZnO nanoparticles was performed with the help of Acridine orange staining protocol mentioned by Asharani et al.74. In brief, untreated and treated zebrafish embryos were washed two times with HF buffer after treatment and stained with 5 µg/ml AO dissolved in HF for 20 min. Followed by staining, embryos were washed with sterilized HF buffer to remove extra stain and observed in green channel of fluorescent microscope (EVOS, ThermoScientific).
Results
Characterization of Synthesized ZnO nanoparticles
To analyze the toxicity of industrially synthesized ZnO nanoparticles, HEBM technique was used as prototype of industrial process. ZnO nanoparticles were collected at 7 h and 10 h milling time and characterized for their physiochemical properties by standard techniques. Figure 1 shows size, shape and purity of synthesized ZnO nanoparticles determined by FESEM analysis with EDX. Size of ZnO nanoparticles were found to be decreased with increase in milling time. 7 h milled nanoparticles were 40 nm in size while it was 20 nm in 10 h as compared to the bulk ZnO particle size of 150 nm. EDX analysis confirmed the presence of only ZnO nanoparticles in the synthesized sample. Size and crystallinity of synthesized ZnO nanoparticles were further estimated by XRD analysis. Figure 2A shows the XRD pattern of pure ZnO before ball milling and after milling for 7 h and 10 h. The analysis of the diffraction peak showed the crystal structure of all synthesized powder as hexagonal wurtzite structure (most stable phase of ZnO), belong to the space group of p63mc and matched with JCPDS data card 36–145175. Compare to pure ZnO, the ball milled ZnO showed increased lowering of intensity, broadening of peaks with increase in milling time due to the reduction of crystallite size. The lattice parameter and crystallite size were calculated by Rietveld refinement using maud software and are tabulated in Table 1. The Reitveld method is known as established technique for extracting structural details from the powder diffraction data. This method employs a least squares procedure to compare Bragg intensities and those calculated from a possible structural model76. The optical properties of Bulk, 7 h and 10 h ZnO nanoparticles were further determined by UV-Vis spectroscopy. As shown in Fig. 2B, Surface plasmon resonance (SPR) peak of ZnO nanoparticles were found to show blue shift with increase in milling time.
It is important to assess the physiochemical properties of nanoparticles in the medium in which their in vitro or in vivo cytotoxicity is investigated77. With this point of view, size and Zeta potential of synthesized ZnO nanoparticles were checked in HF medium which was used in this study to check the effect of nanoparticles in Zebrafish embryos. As shown in Fig. 3A, hydrodynamic diameter of bulk and ZnO nanoparticles were found to be decreased with increase in milling time. The hydrodynamic size of bulk ZnO particles were 640 nm ± 20 nm while it was reduced to 180 nm ± 10 nm and 55 nm ± 5 nm in 7 h and 10 h milled ZnO nanoparticles respectively. Stability of ZnO nanoparticles as determined by their Zeta potential was found to increase with increase in milling time. It was −28 ± 5 mV in bulk ZnO particles which was subsequently increasing to −22 ± 5 mV and −18 ± 4 mV after 7 h and 10 h milling (Fig. 3B). These data confirmed the purity and alteration of physiochemical properties in ZnO nanoparticles with decrease in their size.
Embryonic toxicity of synthesized ZnO nanoparticles
The toxicity of industrially synthesized to Zebrafish embryos were studied by investigating toxicological endpoints during 96hpf exposure. Viability of Zebrafish embryos were recorded in presence of different concentration of bulk and 7 h, 10 h ZnO nanoparticles. Survivability rate of embryos exposed to bulk and ZnO nanoparticles were found to be dependent on milling time corresponding to decreasing size and increase charge (Fig. 4). Moreover the Survivability rate was found to be increased with increase in exposure time. As calculated, lowest concentration for 50% survivability (LC50) were also found to be decreased with increased milling time. As shown in Fig. 5, hatching rate of embryos was also found to be decreased with increase in milling time of ZnO nanoparticles. It was clearly observed that 10 h milled ZnO nanoparticles inhibited the hatching of embryos up to 50% in a group of 20. The data reflected the interpretations that delay in hatching of Zebrafish embryos in presence of ZnO nanoparticles is a function of charge and size of the ZnO nanoparticles. To observe the morphological deformities and organ malfunctions during exposure of different ZnO nanoparticles, microscopic observation was done and recorded. Figure 6 shows the morphology of 24hpf and 72hpf exposed to 50 µg/ml Bulk ZnO and 7 h, 10 h ZnO nanoparticles. Untreated embryos showed normal development at 24 h and 72 h. Bulk ZnO were found to be accumulated at the chorion of 24 h embryos more intensively in comparison to 7 h and 10 h ZnO nanoparticles. Developments of embryos were also found to be effected as visualized by deformed tail, eye and yolk of bulk and ZnO nanoparticles exposed embryos. Interestingly in 72hpf hatched embryos, Bulk ZnO treated embryo were free from abnormalities and looking similar to untreated one while deformed tail formation with bend body was observed in case of 7 h and 10 h treated embryos. Abnormal body movement was also observed in ZnO nanoparticles treated embryos as a result of developmental deformities.
Physiological effect of Bulk and ZnO nanoparticles on Zebrafish embryos
Effects of industrially synthesized ZnO nanoparticles on cellular physiology of Zebrafish embryos were investigated first by checking the heart rate of 96hpf Zebrafish embryos treated with Bulk ZnO and 7 h, 10 h ZnO nanoparticles respectively at concentration range of 0–200 µg/ml. As shown in Fig. 7, heart rate of hatched embryos were found to be reduced with increasing concentration of Bulk and ZnO nanoparticles. Interestingly, it was also found to be dependent on milling time of ZnO nanoparticles along with concentration referring to the dependency of physiological toxicity of ZnO nanoparticles on their size and charge.
Further to evaluate the intensity of intracellular interaction of ZnO nanoparticles, milling time based uptake kinetics was measured with flow cytometric approach. Figure 8 shows uptake of ZnO nanoparticles in whole body single cell suspension of Zebrafish larvae exposed to 50 µg/ml (Fig. 8A) and 250 µg/ml (Fig. 8B) concentration of Bulk, 7 h and 10 h ZnO nanoparticles by analysis of granularity difference in cells. Granularity of cells as denoted by side scatter of histogram plot were found to be increased with concentration and increase in milling time of ZnO nanoparticles. At 50 µg/ml, fold change in mean side scatter was increasing to 1.3, 2.5 and 3.4 times in Bulk, 7 h and 10 h ZnO nanoparticles exposed larval cells while it was 1.8, 3.7 and 6.8 at 250 µg/ml respectively. The data depicted milling time i.e. size dependent significant change in granularity of cells due to uptake of ZnO nanoparticles.
Cellular physiological toxicity of ZnO nanoparticles was further tested by determination of oxidative stress induced by ROS in treated Zebrafish embryos. Figure 9 shows the fluorescence intensity of DCFDA conferring to ROS present in embryonic zebrafish cells treated with 50 µg/ml of Bulk and ZnO nanoparticles. Bulk ZnO were found to induce enhanced generation of ROS in embryonic Zebrafish cells while it was getting quenched in 7 h and 10 h ZnO nanoparticles treated cells respectively. The observation was validated by fluorescence microscopy as shown in Fig. 10. As compared to the untreated Zebrafish larvae higher intensity of DCFDA fluorescence was clearly observed in abdominal region of Bulk ZnO treated Zebrafish larvae which were reducing in 7 h and 10 h ZnO treated fishes in milling time dependent manner. To understand the mechanism of ROS alteration, in silico approach was proceeded by molecular docking of ZnO nanoparticles with sod1 protein which is generally recognized as the regulator of oxidative stress proteins in zebrafish78. Structure of ZnO was prepared by Autodock by applying Gasteiger charges and merging non-polar hydrogen atoms. While preparation of protein was carried out using standard parameters and by adding Kollman charges72 and merging non-polar hydrogen atoms. Figure 11(A) shows conformational probability of ZnO with Sod1 protein. Three probable site of preferable binding was identified as shown in Fig. 11(B) with minimum binding energy of −1.8Kcal/mol and one with −1.9Kcal/mol as shown in Fig. 12(A–C) shows the favorable interaction point of ZnO Np among all three sites which was found at site1 with GLY31 residues. Table 2 represents the molecular docking scores of sod1 with ZnO and also the hydrogen-bonds that are formed with their respective atoms in the amino acids with the help of Chimera73. ZnO nanoparticles were interacting with histidine (HIS), threonine (THR) and proline (PRO) residues at site 1 while the interaction was with Glycine (GLY), Leucine (LEU) and Serine (SER) at site 2. At site 3, interaction was found with Valine (VAL), tyrosine (TYR) and Lysine (LYS) residues of Sod1 protein. Orientations of three best docking site interaction with minimum binding energy are presented in Fig. 12(E,D,F). Bonding patterns were predicted in three sites as shown in Fig. 12(G–I). Bonding pattern analysis showed hydrogen bonding with GLY31 residue while other residues were found to interact by hydrophobic bond.
To determine the consequences of ROS irregularities in embryonic zebrafish cells due to nanoparticles exposure, Apoptosis analysis was done with the help of Acridine orange dye. As shown in Fig. 10, fluorescence of apoptotic cell were seen in untreated zebrafish embryo at abdominal region which were also found in Bulk and ZnO nanoparticle treated embryos. However patches of apoptotic cells were found increased in trunk and tail region of bulk ZnO and 7 h, 10 h ZnO nanoparticles larvae consecutively. The data revealed the milling time i.e. size and charge dependent in vivo cellular cytotoxicity of industrially synthesized ZnO nanoparticles in Zebrafish embryos.
Discussion
This study addressed the issue of in vivo cytotoxicity possessed by industrially synthesized ZnO nanoparticles exposed in environment due to their extensive usage in recent scenario. To explore the potential cytotoxicity of industrially prepared ZnO nanoparticles, High energy ball milling technique was used to mimic the mechanical milling process used in industrial synthesis for lab scale synthesis of ZnO nanoparticles. Bulk ZnO particles were milled for 10 h in tungsten carbide container with tungsten carbide balls and toluene medium to provide the inert environment for contamination free synthesis of ZnO nanoparticles. In preparation process, 300 rpm was used to provide ambient rpm and less heat generation to avoid contamination. HEBM technique has been reported as standard green method for synthesis of nanoparticles by many researchers41 which also has been utilized by industries now a days for synthesis of different types of nanoparticles38,79,80. Synthesis of ZnO nanoparticles from their bulk counterpart by HEBM can be attributed to the high mechanical force generated due to grinding of bulk ZnO particles between WC balls. This approach of synthesizing nanoparticles has been recognized as top down approach in literatures41. For cytotoxicity studies, 7 h and 10 h milled ZnO nanoparticles were collected and characterized for their physiochemical properties in HF medium which was used to rear embryonic Zebrafish. FESEM images (Fig. 1) showed significant size decrease in 7 h and 10 h nanoparticles in due to milling of ZnO bulk particles. The purity of synthesized ZnO nanoparticles was confirmed by EDS analysis where peaks of Zn and Oxygen confirmed the presence of ZnO nanoparticles in each case. However a small peak of Silicon was also observed which may be due to the use of silicon chip as substrate for FESEM analysis (Fig. 1b,d,f). Small amount of agglomeration of particles were observed in 7 h and 10 h milled ZnO nanoparticles (Fig. 1). Decrease in size of ZnO nanoparticles from bulk to 7 h and 10 h milling can be attributed to the kinetic energy provided by WC balls to ZnO particles however the tendency of high agglomeration due to energy transfer in smaller molecules can be defied by the fact of brittle nature of ZnO nanoparticles81,82. Higher energy produced by movement of balls in container has been reported in literatures for repeated fracturing and welding of metal nanoparticles leading to particle size reduction relying on the time and speed factor83,84,85. Moreover, the ambient environment provided by the presence of toluene also plays important role in prevention of high agglomeration83,86. XRD analysis further confirmed decrease in size with maintained hexagonal wurtzite structure of 7 h and 10 h milled ZnO nanoparticles. Clear blue shift in SPR peak while analyzing optical properties with UV-Vis spectroscopy confirmed change in optical properties of ZnO nanoparticles with decrease in size. Appearance of blue shift in SPR peak can be argued to increase in band energy due to electron transfer with decrease in size87. Further, Hydrodynamic diameter measurement by using Dynamic light scattering supported the decrease in size of 7 h and 10 h ZnO nanoparticles by milling in HF medium too. However the increased size determined by hydrodynamic diameter measurement in comparison to the FESEM can be reasoned to the attached water and salt molecules with ZnO nanoparticles in the medium88. Zeta potential determination revealed increase in charge of ZnO nanoparticles with milling time. Increased positivity of zeta potential with increase in milling time can be attributed to the decreased vacancies in ZnO nanoparticles due to decrease in their size with longer milling time81. Investigation of physiochemical properties in synthesized ZnO nanoparticles defined by different experimental data explored the consequent changes with increased milling time. Previous reports have also demonstrated the size dependent changes in physiochemical properties of ZnO nanoparticles synthesized by other techniques89,90.
Exploration of potential mode of in vivo cytotoxicity of ZnO nanoparticles was done by checking their exposure effect in Zebrafish embryos by different embryo-larvae assays. Results obtained from analysis of survivability in presence of 50 µg/ml of bulk and ZnO nanoparticles revealed milling time i.e. size dependent survivability rate in Zebrafish embryos. 50 µg/ml concentration was chosen considering LC50 of the nanoparticles calculated from survivability data of 24hpf, 48hpf and 96hpf exposed embryos. LC50 of bulk and 7 h, 10 h ZnO nanoparticles were recorded decreasing with increased milling time. Similar results of increased mortality rate in zebrafish embryos with decrease in size of ZnO nanoparticles have been defined by different toxicologists59,91. Hatching study also showed milling time dependent delay in hatching of Zebrafish embryos exposed to ZnO bulk and nanoparticles (Fig. 5). The hatching retardation can be attributed to the size dependent interference of Bulk and 7 h,10 h ZnO nanoparticles with hatching enzymes produced by hatching gland embedded in chorion sac60. During normal hatching process hatching gland digest chorion for developmental cycle92. Delay in hatching process due to exposure of Bulk and 7 h, 10 h milled ZnO nanoparticles indicated that inhibition of hatching enzyme by ZnO nanoparticles during embryonic development is influenced by the decreasing size and increasing charge. Previous studies have stated the probable process of hatching enzyme inhibition as their interaction with nanoparticles internalizing through the chorion pore canals or the blocking of chorion pores due to their accumulation on the chorion surface leading to oxygen supply shortage which is essential for the embryonic development93. Similar results were also mentioned in toxicity studies of Zebrafish embryos with copper nanoparticles94 and carbon nanotubes95. Delayed hatching activity with increased milling time of synthesized 7 h and 10 h ZnO nanoparticles can be attributed to the enhanced intensity of interaction level due to decrease in size and increase in surface charge of ZnO nanoparticles due to higher milling time. The subsistence of ZnO nanoparticles cytotoxicity to Zebrafish embryos were further investigated to the impacts on physiological process. Acute morphological changes like yolk sac edema and abnormal tail development in 24hpf embryos along with deformed tail and bend body axis in 72hpf hatched embryos were observed after bulk and 7 h, 10 h ZnO nanoparticles. Heartbeat rate were also found to be negatively influenced with increase in milling time of ZnO nanoparticles. Possible cause of these symbolical toxicity features of ZnO nanoparticles exposed embryos could be the size and charge dependent accumulation, internalization and interaction with outer covering, skin and body fluids. Similar description was mentioned by Asharani et al.74 in case of silver nanoparticles toxicity behavior. Further, to evaluate the effect of changed physiochemical properties (size and zeta potential) in ZnO nanoparticles on cellular physiology of Zebrafish embryos, uptake of nanoparticles were evaluated by measuring granularity change in single cell suspensions. Analysis (Fig. 8) showed milling time and concentration dependent granularity change in embryonic Zebrafish cells depicting the role of altered size and charge in eliciting cellular physiological changes due to ZnO nanoparticles exposure. Elicited physiological metabolic change includes alteration of oxidative stress in form of ROS variation. Flow cytometric analysis of DCFDA fluorescence intensity showed induction of enhanced ROS generation by Bulk ZnO particles with ROS reduction in Zebrafish embryos treated with 7 h and 10 h ZnO nanoparticles (Figs 9 and 10) in comparison to untreated embryos. Previous reports have mentioned enhanced generation of ROS in Zebrafish as well as other live cells due to ZnO nanoparticles exposure93,96. This contradictory behavior of HEBM synthesized ZnO nanoparticles can be attributed to the generation of oxygen vacancies due to milling of ZnO particles81. Metal Oxide nanoparticles synthesized by Ball milling method has been reported to possess oxygen vacancy as their intrinsic defects by many researchers97,98. These oxygen vacancies are the points in the lattice where an electron is missing from the oxygen shell99. Such oxygen vacancies can react with the free electrons of free radicals leading to antioxidant property100. Previous reports have mentioned quenching of ROS in live models exposed to nanoparticles like cerium oxide101,102 and fullerenes103 bearing oxygen vacancies. ROS has been reported as the key element of cellular physiological process. It has been regarded as regulator of adaptation to hypoxia in cells104 by playing important role in signaling pathways. Moreover they have been recognized as the inducer of autophagy for maintenance of homoeostasis104,105,106. Influential changes in ROS can be attributed to the function of Sod1 protein regulation due to ZnO nanoparticles exposure78. To understand the molecular basis of ROS alteration, in silico approach was used and molecular docking of ZnO nanoparticles with Sod1 was performed. Docking showed the three favorable interaction modes of ZnO nanoparticles out of 9 modes interpreted with minimum binding energy (Table 2). Autodock predicted hydrophobic interactions with ASN, VAL, HIS and PRO residues while hydrogen bonding was predicted with GLY(Glycine) residue(Figs 11 and 12). Hence it can argued that the altered charge in ZnO nanoparticles due to milling effect influences the configurational changes in Sod1 protein by influencing the interaction with glycine residue and binding energy. This configurational changes downregulates the function of sod1 leading to non-functionality of oxidative stress proteins. It can be argued that the quenching of ROS by bulk and ZnO nanoparticles disturb the normal cellular physiological process by altering the signaling pathways in zebrafish embryos cells which could lead to alteration in other metabolic process promoting in their cytotoxicity.
ZnO nanoparticles have been reported to alter the metabolic process leading to apoptosis and necrosis in live models107,108. With reference to the previous reports109, it was speculated that HEBM synthesized ZnO nanoparticles would have been eliciting the programmed cell death (apoptosis) in Zebrafish embryos. The expected outcome was tested by apoptosis analysis in hatched embryos by Acridine orange staining. As shown in Fig. 13, Acridine orange staining affirmed the speculation and it was found that the intensity of apoptotic cells in exposed embryos were increasing with increasing milling time of ZnO nanoparticles depicting their dependence on size and charge. With reference to the experimental data and previous reports93,110, it can be argued that the exposure of Bulk and ZnO nanoparticles to zebrafish embryos alters their normal physiological and developmental process by interfering with the cellular metabolic pathways. Due to accumulation ZnO nanoparticles on zebrafish embryos cells, hypoxic condition gets created leading to stress conditions. Internalized ZnO nanoparticles quench ROS inside cells making them incapable of regulating the normal signaling pathway for stress regulation. Moreover internalized ZnO nanoparticles interact with apoptosis inducing proteins like p53111 influencing their regulation for programmed cell death phenomenon.
This study explained the cytotoxicity of industrially synthesized ZnO nanoparticles to aquatic organism as well as their effect on in vivo live model. Observed effects on Zebrafish study can be mimicked to human cells due to their high genetic similarities. Moreover it described a new horizon of the cytotoxicity mechanism. The explanation further needs a detail investigation on proteomics and genomics level for more description.
Conclusion
As represented in Fig. 14, this study reveals the in vivo cytotoxicity of industrially synthesized ZnO nanoparticles in Zebrafish embryos. Industrial synthesis was mimicked at lab scale by high energy ball milling (HEBM) technique. Synthesized 7 h and 10 h milled ZnO nanoparticles showed significant change in physiochemical and optical properties in comparison to the bulk counterpart. Cytotoxicity evaluation in Zebrafish embryos demonstrated the organ malformation and retarded hatching after 96hpf exposure. Physiological toxicity assessment showed abnormal heart rate on ZnO nanoparticle exposure. Acute ZnO nanoparticles exposure quenched ROS inside cells and induced higher apoptosis. Molecular docking predicted influence of ZnO nanoparticles to Sod1 oxidative stress protein with the help of hydrogen bonding interaction with glycine residues. The result implies the size and charge dependent cytotoxicity of industrially synthesized ZnO nanoparticles. In addition, this study revealed a new aspect of mechanism of cytotoxicity to the aquatic organism and live cells due to ZnO nanoparticles present in industrial products and effluents. Industrially synthesized ZnO nanoparticles were inducing cytotoxicity by accumulating at the surface as well as internalizing inside the cells leading to quenching of ROS interfering with the normal adaptive stress signaling pathway hence increasing the metabolic abnormalities. Moreover internalized ZnO nanoparticles were interfering in normal programmed cell death process influencing the number of apoptotic cells. The study draws attention towards this new aspect of in vivo cytotoxicity of industrially synthesized ZnO nanoparticles and demands more investigation to proteomics and genomic level. Currently this aspect of nanotoxicity was hidden regarding the effects of industrial synthesized ZnO nanoparticles. This study will be helpful to understand the mechanism and describe the optimal level of ZnO particles exposure to the daily products and industrial effluents.
References
Huang, M. H. Room-Temperature Ultraviolet Nanowire Nanolasers. Science (80-.). 292, 1897–1899 (2001).
Vayssieres, L., Keis, K., Hagfeldt, A. & Lindquist, S. E. Three-dimensional array of highly oriented crystalline ZnO microtubes. Chem. Mater. 13, 4395–4398 (2001).
Jin, X. et al. Study of tetrapodal zno-pdms composites: A comparison of fillers shapes in stiffness and hydrophobicity improvements. PLoS One 9 (2014).
Wahab, R., Khan, F., Kaushik, N. K., Musarrat, J. & Al-Khedhairy, A. A. Photocatalytic TMO-NMs adsorbent: Temperature-Time dependent Safranine degradation, sorption study validated under optimized effective equilibrium models parameter with standardized statistical analysis. Sci. Rep. 7, 42509 (2017).
Izu, N. et al. Polyol synthesis of Al-doped ZnO spherical nanoparticles and their UV-vis-NIR absorption properties. Ceram. Int. 40, 8775–8781 (2014).
Rajalakshmi, M. et al. Blue green and UV emitting ZnO nanoparticles synthesized through a non-aqueous route. Opt. Mater. (Amst). 34, 1241–1245 (2012).
Mirzaei, H. & Darroudi, M. Zinc oxide nanoparticles: Biological synthesis and biomedical applications. Ceram. Int. 43, 907–914 (2016).
Wahab, R., Khan, F., Lutfullah, Aldahmash, B., Abdullah & Al-Khedhairy, A. A. Statistical Analytical Determination of Miniature Zinc Oxide Nanoclusters for Photodegradation of Methylene Red Dye. Nanosci. Nanotechnol. Lett. 9(1–7), 7 (2017).
Wahab, R. et al. Utilization of photocatalytic ZnO nanoparticles for deactivation of safranine dye and their applications for statistical analysis. Phys. E Low-Dimensional Syst. Nanostructures 69, 101–108 (2015).
Wahab, R., Khan, F., Lutfullah, Singh, R. B. & Khan, A. Enhance antimicrobial activity of ZnO nanomaterial’s (QDs and NPs) and their analytical applications. Phys. E Low-Dimensional Syst. Nanostructures 62, 111–117 (2014).
Lu, P. J., Huang, S. C., Chen, Y. P., Chiueh, L. C. & Shih, D. Y. C. Analysis of titanium dioxide and zinc oxide nanoparticles in cosmetics. J. Food Drug Anal. 23, 587–594 (2015).
Wellings, J. S., Chaure, N. B., Heavens, S. N. & Dharmadasa, I. M. Growth and characterisation of electrodeposited ZnO thin films. Thin Solid Films 516, 3893–3898 (2008).
Rajendra, R. et al. Use of zinc oxide nano particles for production of antimicrobial textiles. Int. J. Eng. Sci. Technol. 2, 202–208 (2010).
Rivero, P. J., Urrutia, A., Goicoechea, J. & Arregui, F. J. Nanomaterials for Functional Textiles and Fibers. Nanoscale Res. Lett. 10, 501 (2015).
Mishra, Y. K. et al. Virostatic potential of micro-nano filopodia-like ZnO structures against herpes simplex virus-1. Antiviral Res. 92, 305–312 (2011).
Antoine, T. E. et al. Prophylactic, therapeutic and neutralizing effects of zinc oxide tetrapod structures against herpes simplex virus type-2 infection. Antiviral Res. 96, 363–375 (2012).
Wahab, R., Khan, F., Mishra, Y. K., Musarrat, J. & Al-Khedhairy, A. A. Antibacterial studies and statistical design set data of quasi zinc oxide nanostructures. RSC Adv. 6, 32328–32339 (2016).
Dwivedi, S. et al. Reactive oxygen species mediated bacterial biofilm inhibition via zinc oxide nanoparticles and their statistical determination. PLoS One 9 (2014).
Ahmad, J., Wahab, R., Siddiqui, M. A., Musarrat, J. & Al-Khedhairy, A. A. Zinc oxide quantum dots: a potential candidate to detain liver cancer cells. Bioprocess Biosyst. Eng. 38, 155–163 (2015).
Thavasi, S. A. S. W., Jose, V., Ramakrishna, R. & Ho, S. GW, Z. L. S. W. Controlled synthesis and application of ZnO nanoparticles, nanorods and nanospheres in dye-sensitized solar cells. Nanotechnology 20, 45604 (2009).
Tang, X., Choo, E. S. G., Li, L., Ding, J. & Xue, J. Synthesis of zno nanoparticles with tunable emission colors and their cell labeling applications. Chem. Mater. 22, 3383–3388 (2010).
Antoine, T. E. et al. Intravaginal Zinc Oxide Tetrapod Nanoparticles as Novel Immunoprotective Agents against Genital Herpes. J. Immunol. 196, 4566–4575 (2016).
Wahab, R. et al. Optical analysis of zinc oxide quantum dots with bovine serum albumin and bovine hemoglobin. J. Pharm. Innov. 9, 48–52 (2014).
Srivastava, V., Gusain, D. & Sharma, Y. C. Synthesis, characterization and application of zinc oxide nanoparticles (n-ZnO). Ceram. Int. 39, 9803–9808 (2013).
Zamiri, R. et al. Aqueous starch as a stabilizer in zinc oxide nanoparticle synthesis via laser ablation. J. Alloys Compd. 516, 41–48 (2012).
Bagabas, A., Alshammari, A., Aboud, M. F. A. & Kosslick, H. Room-temperature synthesis of zinc oxide nanoparticles in different media and their application in cyanide photodegradation. Nanoscale Res Lett 8, 516 (2013).
Hong, R. Synthesis and surface modification of ZnO nanoparticles. Chem. Eng. J. 119, 71–81 (2006).
Ghorbani, H., Mehr, F., Pazoki, H. & Rahmani, B. Synthesis of ZnO Nanoparticles by Precipitation Method. Orient. J. Chem. 31, 1219–1221 (2015).
Baruwati, B., Kumar, D. K. & Manorama, S. V. Hydrothermal synthesis of highly crystalline ZnO nanoparticles: A competitive sensor for LPG and EtOH. Sensors Actuators, B Chem. 119, 676–682 (2006).
Hoseini, S. J., Darroudi, M., Kazemi Oskuee, R., Gholami, L. & Khorsand Zak, A. Honey-based synthesis of ZnO nanopowders and their cytotoxicity effects. Adv. Powder Technol. 1–6, https://doi.org/10.1016/j.apt.2015.04.003 (2013).
Azizi, S., Ahmad, M. B., Namvar, F. & Mohamad, R. Green biosynthesis and characterization of zinc oxide nanoparticles using brown marine macroalga Sargassum muticum aqueous extract. Mater. Lett. 116, 275–277 (2014).
Jalal, R. et al. ZnO nanofluids: Green synthesis, characterization, and antibacterial activity. Mater. Chem. Phys. 121, 198–201 (2010).
Meulenkamp. Synthesis and Growth of ZnO Nanoparticles. J. Phys. Chem. B 102, 5566–5572 (1998).
Kharissova, O. V., Dias, H. V. R., Kharisov, B. I., Pérez, B. O. & Pérez, V. M. J. The greener synthesis of nanoparticles. Trends Biotechnol. 31, 240–248 (2013).
Duggal, N. et al. Zinc oxide tetrapods inhibit herpes simplex virus infection of cultured corneas. Mol. Vis. 23, 26–38 (2017).
Mishra, Y. K. et al. Versatile fabrication of complex shaped metal oxide nano-microstructures and their interconnected networks for multifunctional applications. KONA Powder Part. J. 31, 92–110 (2014).
Mishra, Y. K. et al. Fabrication of macroscopically flexible and highly porous 3D semiconductor networks from interpenetrating nanostructures by a simple flame transport approach. Part. Part. Syst. Charact. 30, 775–783 (2013).
Salah, N. et al. High-energy ball milling technique for ZnO nanoparticles as antibacterial material. Int. J. Nanomedicine 6, 863–869 (2011).
Suryanarayana, C. Mechanical alloying and milling. Prog. Mater. Sci. 46, 1–184 (2001).
Tan, O. K., Cao, W., Hu, Y. & Zhu, W. Nanostructured oxides by high-energy ball milling technique: Application as gas sensing materials. Solid State Ionics 172, 309–316 (2004).
Sopicka-Lizer, M. High-energy ball milling., https://doi.org/10.1533/9781845699444 (2010).
Jeng, H. A. & Swanson, J. Toxicity of Metal Oxide Nanoparticles in Mammalian Cells. Cell 4529, 2699–2711 (2006).
Song, W. et al. Role of the dissolved zinc ion and reactive oxygen species in cytotoxicity of ZnO nanoparticles. Toxicol. Lett. 199, 389–397 (2010).
Wahab, R. et al. ZnO nanoparticles induces cell death in malignant human T98G gliomas, KB and non-malignant HEK cells. J. Biomed. Nanotechnol. 9, 1181–1189 (2013).
Wahab, R. et al. Self-Styled ZnO Nanostructures Promotes the Cancer Cell Damage and Supresses the Epithelial Phenotype of Glioblastoma. Sci. Rep. 6, 19950 (2016).
Papavlassopoulos, H. et al. Toxicity of functional nano-micro zinc oxide tetrapods: Impact of cell culture conditions, cellular age and material properties. PLoS One 9 (2014).
Wahab, R. et al. Platinum Quantum Dots and Their Cytotoxic Effect Towards Myoblast Cancer Cells (C<SUB>2</SUB>C<SUB>12</SUB>). J. Biomed. Nanotechnol. 8, 424–431 (2012).
Wahab, R. et al. Zinc oxide quantum dots: Multifunctional candidates for arresting C2C12 cancer cells and their role towards caspase 3 and 7 genes. RSC Adv. 6, 26111–26120 (2016).
De Berardis, B. et al. Exposure to ZnO nanoparticles induces oxidative stress and cytotoxicity in human colon carcinoma cells. Toxicol. Appl. Pharmacol. 246, 116–127 (2010).
Chin, B., Xinxin, H., Xiong, Z. & Toxicity, S. of zinc oxide (ZnO) nanoparticles on human bronchial epithelial cells (BEAS-2B) is accentuated by oxidative stress. Food Chem. Toxicol. 48, 1762–1766 (2010).
Wahab, R. et al. Statistical analysis of gold nanoparticle-induced oxidative stress and apoptosis in myoblast (C2C12) cells. Colloids Surfaces B Biointerfaces 123, 664–672 (2014).
Huang, C. C., Aronstam, R. S., Chen, D. R. & Huang, Y. W. Oxidative stress, calcium homeostasis, and altered gene expression in human lung epithelial cells exposed to ZnO nanoparticles. Toxicol. Vitr. 24, 45–55 (2010).
Vandebriel, R. J. & De Jong, W. H. A review of mammalian toxicity of ZnO nanoparticles. Nanotechnol. Sci. Appl. 5, 61–71 (2012).
Wahab, R. et al. ZnO nanoparticles induced oxidative stress and apoptosis in HepG2 and MCF-7 cancer cells and their antibacterial activity. Colloids and surfaces.B, Biointerfaces 117, 267–276 (2014).
Hackenberg, S. et al. Cytotoxic, genotoxic and pro-inflammatory effects of zinc oxide nanoparticles in human nasal mucosa cells in vitro. Toxicol. Vitr. 25, 657–663 (2011).
Wang, Y. et al. A study of the mechanism of in vitro cytotoxicity of metal oxide nanoparticles using catfish primary hepatocytes and human HepG2 cells. Sci. Total Environ. 409, 4753–4762 (2011).
Fukui, H. et al. Association of zinc ion release and oxidative stress induced by intratracheal instillation of ZnO nanoparticles to rat lung. Chem. Biol. Interact. 198, 29–37 (2012).
Panas, A. et al. Toxic Potential of Materials at the Nanolevel. Beilstein J. Nanotechnol. 5, 1590–1602 (2014).
Bai, W. et al. Toxicity of zinc oxide nanoparticles to zebrafish embryo: a physicochemical study of toxicity mechanism. J. nanoparticle Res. 12, 1645–1654 (2009).
Xia, T. et al. Decreased dissolution of ZnO by iron doping yields nanoparticles with reduced toxicity in the rodent lung and zebrafish embryos. ACS Nano 5, 1223–1235 (2011).
Lieschke, G. J. & Currie, P. D. Animal models of human disease: zebrafish swim into view. Nat. Rev. Genet. 8, 353–367 (2007).
Hill, A. J., Teraoka, H., Heideman, W. & Peterson, R. E. Zebrafish as a model vertebrate for investigating chemical toxicity. Toxicol. Sci. 86, 6–19 (2005).
Dai, Y. J. et al. Zebrafish as a model system to study toxicology. Env. Toxicol Chem 33, 11–17 (2014).
Chakraborty, C., Sharma, A. R., Sharma, G. & Lee, S.-S. Zebrafish: A complete animal model to enumerate the nanoparticle toxicity. J. Nanobiotechnology 14, 65 (2016).
Jang, G. H., Hwang, M. P., Kim, S. Y., Jang, H. S. & Lee, K. H. A systematic in-vivo toxicity evaluation of nanophosphor particles via zebrafish models. Biomaterials 35, 440–449 (2014).
George, S., Gardner, H. & Seng, E. Differential Effect of Solar Light in Increasing the Toxicity of Silver and Titanium Dioxide Nanoparticles to a Fish Cell Line and Zebrafish Embryos. … Sci. Technol. (2014).
Zon, L. I. L. I. & Peterson, R. T. R. T. In vivo drug discovery in the zebrafish. Nat. Rev. Drug Discov. 4, 35–44 (2005).
George, S. et al. Use of a high-throughput screening approach coupled with in vivo zebrafish embryo screening to develop hazard ranking for engineered nanomaterials. ACS Nano 5, 1805–1817 (2011).
Scholz, S., Fischer, S. & Gündel, U. The zebrafish embryo model in environmental risk assessment—applications beyond acute toxicity testing. … Sci. Pollut. … (2008).
Chen, X., Zhong, Z., Xu, Z., Chen, L. & Wang, Y. 2′,7′-Dichlorodihydrofluorescein as a fluorescent probe for reactive oxygen species measurement: Forty years of application and controversy. Free Radic. Res. 44, 587–604 (2010).
Trott, O. & Olson, A. AutoDock Vina: inproving the speed and accuracy of docking with a new scoring function, efficient optimization and multithreading. J. Comput. Chem. 31, 455–461 (2010).
Gasteiger, J. & Marsili, M. A New Model for Calculating Atomic Charges in Molecules. Tetrahedron Lett. 34, 3181–3184 (1978).
Pettersen, E. F. et al. UCSF Chimera—A Visualization System for Exploratory Research and Analysis. J Comput Chem 25, 1605–1612 (2004).
Asharani, P. V., Lian, W. Y., Gong, Z. & Valiyaveettil, S. Toxicity of silver nanoparticles in zebrafish models. Nanotechnology 19, 255102 (2008).
Das, T., Das, B. K., Parashar, K., Parashar, S. K. S. & Nagamalleswara, R. A. Structural, electrical and FT-IR studies of nano Zn1-x Cax O by solid state reaction method. Adv. Mater. Res. 938, 63–70 (2014).
Kumar, L., Kumar, P., Narayan, A. & Kar, M. Rietveld analysis of XRD patterns of different sizes of nanocrystalline cobalt ferrite. Int. Nano Lett. 3, 8 (2013).
Prasad, R. Y. et al. Effect of treatment media on the agglomeration of titanium dioxide nanoparticles: Impact on genotoxicity, cellular interaction, and cell cycle. ACS Nano 7, 1929–1942 (2013).
Mugoni, V., Camporeale, A. & Santoro, M. M. Analysis of oxidative stress in zebrafish embryos. J. Vis. Exp. 1–11, https://doi.org/10.3791/51328 (2014).
Suwanboon, S., Amornpitoksuk, P. & Bangrak, P. Synthesis, characterization and optical properties of Zn1−xTixO nanoparticles prepared via a high-energy ball milling technique. Ceram. Int. 37, 333–340 (2011).
de Carvalho, J. F., de Medeiros, S. N., Morales, M. A., Dantas, A. L. & Carriço, A. S. Synthesis of magnetite nanoparticles by high energy ball milling. Appl. Surf. Sci. 275, 84–87 (2013).
Parashar, S. K. S., Murty, B. S., Repp, S., Weber, S. & Erdem, E. Investigation of intrinsic defects in core-shell structured ZnO nanocrystals. J. Appl. Phys. 111 (2012).
Tripathy, B. B., Sahoo, P. K., Mishra, D. K., Parashar, S. K. S. & Mishra, N. C. Evolution of structural and optical properties in TiO<inf>2</inf> nanoparticles prepared by high-energy ball milling. Adv. Sci. Lett. 20, 612–616 (2014).
Suryanarayana, C. Mechanical alloying and milling. Prog. Mater. Sci. 46, 1–184 (2001).
Parashar, S. K. S., Choudhary, R. N. P. & Murty, B. S. Ferroelectric phase transition in Pb0.92Gd0.08(Zr0.53Ti0.47)0.98O3 nanoceramic synthesized by high-energy ball milling. J. Appl. Phys. 94, 6091–6096 (2003).
Trichs, D. M. et al. Mechanical alloying of Co and Sb: Structural, thermal, optical, and photoacoustic studies. J. Appl. Phys. 110 (2011).
Indris, S., Bork, D. & Heitjans, P. Nanocrystalline Oxide Ceramics Prepared by High-Energy Ball Milling. J. Mater. Synth. Process. 8, 3–8 (2000).
Smitha, S. L., Nissamudeen, K. M., Philip, D. & Gopchandran, K. G. Studies on surface plasmon resonance and photoluminescence of silver nanoparticles. Spectrochim. Acta - Part A Mol. Biomol. Spectrosc. 71, 186–190 (2008).
Allouni, Z. E., Cimpan, M. R., Høl, P. J., Skodvin, T. & Gjerdet, N. R. Agglomeration and sedimentation of TiO2 nanoparticles in cell culture medium. Colloids Surfaces B Biointerfaces 68, 83–87 (2009).
Meulenkamp, E. A. Size Dependence of the Dissolution of ZnO Nanoparticles. J. Phys. Chem. B 102, 7764–7769 (1998).
Rao, C. N. R., Kulkarni, G. U., John Thomas, P. & Edwards, P. P. Size-dependent chemistry: Properties of nanocrystals. Chem. - A Eur. J. 8, 28–35 (2002).
Zhu, X., Wang, J., Zhang, X., Chang, Y. & Chen, Y. The impact of ZnO nanoparticle aggregates on the embryonic development of zebrafish (Danio rerio). Nanotechnology 20, 195103 (2009).
Hua, J., Peijnenburg, W. J. G. M. & Vijver, M. G. TiO2 nanoparticles reduce the effects of ZnO nanoparticles and Zn ions on zebrafish embryos (Danio rerio). NanoImpact 2, 45–53 (2016).
Zhao, X., Wang, S., Wu, Y., You, H. & Lv, L. Acute ZnO nanoparticles exposure induces developmental toxicity, oxidative stress and DNA damage in embryo-larval zebrafish. Aquat. Toxicol. 136–137, 49–59 (2013).
Bai, W., Tian, W., Zhang, Z. & He, X. Effects of copper nanoparticles on the development of zebrafish embryos. … Nanosci. … (2010).
Cheng, J. P. et al. Acute and long-term effects after single loading of functionalized multi-walled carbon nanotubes into zebrafish (Danio rerio). Toxicol. Appl. Pharmacol. 235, 216–225 (2009).
Sharma, V., Anderson, D. & Dhawan, A. Zinc oxide nanoparticles induce oxidative DNA damage and ROS-triggered mitochondria mediated apoptosis in human liver cells (HepG2). Apoptosis 17, 852–870 (2012).
Srinivasan, S. S., Kislov, N., Emirov, Y., Goswami, D. Y. & Stefanakos, E. K. Investigation of ZnFe2O4 Nanoparticles Prepared by High Energy Milling. Vol. 12 Micro Nano Syst. Parts A B 843–847, https://doi.org/10.1115/IMECE2009-11573 (2009).
Erdem, E. et al. Defect structure in aliovalently-doped and isovalently-substituted PbTiO3 nano-powders. J. Phys. Condens. Matter 22, 345901 (2010).
Prasad Yadav, T., Manohar Yadav, R. & Pratap Singh, D. Mechanical Milling: a Top Down Approach for the Synthesis of Nanomaterials and Nanocomposites. Nanosci. Nanotechnol. 2, 22–48 (2012).
Trogadas, P., Parrondo, J. & Ramani, V. CeO 2 Surface Oxygen Vacancy Concentration Governs in Situ Free Radical Scavenging E ffi cacy in Polymer Electrolytes. ACS Appl. Mater. Interfaces 4, 5098–5102 (2012).
Hirst, S. M. et al. Anti-inflammatory properties of cerium oxide nanoparticles. Small 5, 2848–2856 (2009).
Hirst, S. M. et al. Bio-distribution and In Vivo Antioxidant Effects of Cerium Oxide Nanoparticles in Mice. Environ. Toxicol. 24, 296–303 (2009).
Markovic, Z. & Trajkovic, V. Biomedical potential of the reactive oxygen species generation and quenching by fullerenes (C60). Biomaterials 29, 3561–3573 (2008).
Sena, L. A. & Chandel, N. S. Physiological roles of mitochondrial reactive oxygen species. Mol. Cell 48, 158–166 (2012).
Kroemer, G., Mariño, G. & Levine, B. Autophagy and the Integrated Stress Response. Mol. Cell 40, 280–293 (2010).
Levine, B., Mizushima, N. & Virgin, H. W. Autophagy in immunity and inflammation. Nature 469, 323–335 (2011).
Wang, C., Hu, X., Gao, Y. & Ji, Y. ZnO nanoparticles treatment induces apoptosis by increasing intracellular ROS levels in LTEP-a-2 cells. Biomed Res. Int. 2015 (2015).
Wilhelmi, V. et al. Zinc Oxide Nanoparticles Induce Necrosis and Apoptosis in Macrophages in a p47phox- and Nrf2-Independent Manner. PLoS One 8 (2013).
Sharma, V., Singh, P., Pandey, A. & Dhawan, A. Induction of oxidative stress, DNA damage and apoptosis in mouse liver after sub-acute oral exposure to zinc oxide nanoparticles. Mutat. Res. 745, 84–91 (2012).
Xiong, D., Fang, T., Yu, L., Sima, X. & Zhu, W. Effects of nano-scale TiO2, ZnO and their bulk counterparts on zebrafish: Acute toxicity, oxidative stress and oxidative damage. Sci. Total Environ. 409, 1444–1452 (2011).
Kumar, A., Najafzadeh, M., Jacob, B. K., Dhawan, A. & Anderson, D. Zinc oxide nanoparticles affect the expression of p53, Ras p21 and JNKs: An ex vivo/in vitro exposure study in respiratory disease patients. Mutagenesis 30, 237–245 (2015).
Author information
Authors and Affiliations
Contributions
The corresponding author Dr. SKS Parashar designed and performed the experiments related to material synthesis and their characterizations. Mr. Suresh K Verma characterized the particles by DLS and other techniques. He also designed and performed biological experiments, analyzed the data and wrote the paper. Mr. Pritam K Panda has performed all computational experiments with molecular docking. He also analyzed and prepared figures related to this. Miss Ealisha Jha assisted in DLS experiments and assisted in Zebrafish assays. Dr. M. Suar was a part of all the experiments including drafting and editing the manuscript. All authors reviewed and discussed on the manuscript.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Verma, S.K., Panda, P.K., Jha, E. et al. Altered physiochemical properties in industrially synthesized ZnO nanoparticles regulate oxidative stress; induce in vivo cytotoxicity in embryonic zebrafish by apoptosis. Sci Rep 7, 13909 (2017). https://doi.org/10.1038/s41598-017-14039-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-14039-y
- Springer Nature Limited
This article is cited by
-
Experimental and density functional theory studies on some metal oxides and the derived nanoclusters: a comparative effects on human ferritin
Discover Nano (2024)
-
Current Updates On the In vivo Assessment of Zinc Oxide Nanoparticles Toxicity Using Animal Models
BioNanoScience (2021)
-
Cell-biological effects of zinc oxide spheres and rods from the nano- to the microscale at sub-toxic levels
Cell Biology and Toxicology (2021)
-
A conceptual change in crystallisation mechanisms of oxide materials from solutions in closed systems
Scientific Reports (2020)
-
Flexible ZnO-mAb nanoplatforms for selective peripheral blood mononuclear cell immobilization
Scientific Reports (2020)