Abstract
Supramolecular chirality typically originates from either chiral molecular building blocks or external chiral stimuli. Generating chirality in achiral systems in the absence of a chiral input, however, is non-trivial and necessitates spontaneous mirror symmetry breaking. Achiral nematic lyotropic chromonic liquid crystals have been reported to break mirror symmetry under strong surface or geometric constraints. Here we describe a previously unrecognised mechanism for creating chiral structures by subjecting the material to a pressure-driven flow in a microfluidic cell. The chirality arises from a periodic double-twist configuration of the liquid crystal and manifests as a striking stripe pattern. We show that the mirror symmetry breaking is triggered at regions of flow-induced biaxial-splay configurations of the director field, which are unstable to small perturbations and evolve into lower energy structures. The simplicity of this unique pathway to mirror symmetry breaking can shed light on the requirements for forming macroscopic chiral structures.
Similar content being viewed by others
Introduction
Chirality, or the absence of mirror symmetry, is ubiquitous in living systems, from DNA to the placement of organs in mammals1,2,3. Chiral objects in chemistry and materials science have revolutionised chemical catalysis4,5, optical sensors6,7, and metamaterial design8,9,10. There are two common ways how supramolecular chiral structures emerge. They can either be induced by a chiral input which in turn generates a chiral output, or they are composed of molecular building blocks that are themselves chiral2,11. By contrast, the emergence of chirality in centrosymmetric systems is much less common, and it requires spontaneous mirror symmetry breaking12,13. Elucidating the routes to induce mirror symmetry breaking in achiral molecular assemblies can guide technological advances exploiting chirality14,15.
Liquid crystals (LCs) are materials composed of anisotropic mesogens. Achiral LCs of specific molecular shape are an example of a material that can form chiral structures13,16,17,18; the molecular bow shape of bend-core liquid crystals in the smectic phase, for instance, introduces chirality through an intralayer polar orientational ordering combined with a collective tilt of the smectic planes19. Hydrodynamic instabilities induced by oscillatory shear with a zero net flow can trigger chiral Williams domains in nematic thermotropic liquid crystals20,21. Mirror symmetry breaking has also been shown to emerge in rod-shaped liquid crystals in the nematic phase when the material is confined to a specific spatial confinement that can be imposed by curved or inclined surfaces, or by hybrid surface anchoring conditions13,22,23. The mirror symmetry breaking induced by spatial confinement is particularly prevalent in nematic lyotropic chromonic liquid crystals (LCLCs)24,25,26,27,28,29, aqueous dispersions of disk-shaped molecules that self-assemble into cylindrical aggregates. Over a range of temperatures and concentrations, LCLC solutions exhibit a nematic phase30,31. Due to the large aspect ratio of the aggregates, nematic LCLCs have a large elastic anisotropy: The twist Frank elastic constant, K2, is an order of magnitude lower than the Frank elastic constants of splay, K1, and bend, K330,32. If nematic LCLCs are forced to adapt to a curved surface imposed by spatial confinement, instead of relieving these deformations through splay and bend modes, they do so through a twist deformation that minimises the elastic free energy. Such a twist deformation is a pivotal element in forming chiral helices24,26. In addition to the Frank elastic constants of splay, twist and bend, the saddle-splay Frank elastic constant, K24, also plays an essential role in triggering and stabilising chiral structures through lowering the elastic energy in cylindrical and toroidal geometries29,33,34. Exploiting the ease with which twist deformations occur and the non-negligible saddle-splay elasticity that stabilises chiral structures, programmed surface anchoring conditions have been developed to control chiral structures in achiral nematic LCLC solutions35,36,37. To date, structural chirality in achiral nematic LCLCs induced by anisotropic elasticities and confined boundary conditions has been reported exclusively in the static state at rest, where an imposed curvature or a pre-patterned surface is necessary for the emergence of chirality13.
In this study, we discuss our discovery of flow-induced mirror symmetry breaking in nematic LCLC solutions in the absence of curved or patterned surfaces. We reveal the emergence of a distinct macroscopic chiral structure when the material is flowing in a microfluidic cell; a periodic double-twist configuration that leads to a mesmerising stripe pattern perpendicular to the flow direction. We show that the periodicity of the stripes is governed by the competition between the viscous torque and the bend elastic torque acting on the director, and can be tuned by varying the gap thickness of the microfluidic cell or the flow velocity.
We demonstrate that the mirror symmetry breaking results from (i) the flow-tumbling character of nematic LCLC solutions and (ii) an elastic instability of a specific flow-induced configuration of the director field facilitated by the low energetic cost of twist deformations. A tumbling nematic experiences a non-zero viscous torque for any orientation of the director (α2α3 < 0, where α2 and α3 are the Leslie viscosity coefficients38), which destabilises the director field in shear flow. This induces distinct director configurations, including a biaxial-splay configuration characterised by opposite directions of the splay deformation in two orthogonal planes. We show that this biaxial-splay configuration, for which the stability solution is dictated by the saddle-splay elasticity, is unstable and evolves towards a lower energy state of the director field; the periodic double-twist configuration that is selected due to the small twist Frank elastic constant of LCLC solutions. This path to macroscopic chirality is unique and exceptionally simple: all it requires is a pressure-driven flow. The structural chirality is here triggered by a dynamic process when an achiral nematic material is driven away from equilibrium and relaxes to a chiral lower energy state.
Results and discussion
Flow-induced periodic double-twist structures in achiral nematic liquid crystals
An aqueous solution of 13 wt% disodium cromoglycate (DSCG) is placed in a rectangular microfluidic cell of length l = 55 mm, width w = 40 mm, and gap thickness b = 8–26 μm at room temperature T = 23.2 ± 0.5 °C. At this concentration and temperature, DSCG solutions form a nematic phase30,31. We probe the director alignment of the nematic DSCG solution using polarising optical microscopy. The surface anchoring is planar and in the direction of the cell length, which we denote as x-direction. At rest, when imaged under crossed polariser (placed along the x-direction) and analyser, the material thus appears black, as shown in Fig. 1a, b.
Remarkably, at a volumetric flow rate of q = 0.25 μl/min, a large-scale stripe pattern spontaneously emerges perpendicular to the flow direction, as shown in Fig. 1a (see also Supplementary Video 1). Using a PolScope (OpenPolScope) to quantify the gap-averaged retardance map, we find that the retardance is low in certain regions of the stripes, indicating a homeotropic alignment where the director is parallel to the cell thickness direction, as shown in Fig. 1c. Between these regions, the director rotates from being parallel to the z-direction with a polar angle θ ≈ 0°, to being more parallel to the y-direction with an azimuthal angle φ ≈ 90° (Fig. 1c, d). The director thus undergoes a periodic twist deformation in the flow direction, as schematically shown in Fig. 1a. We denote the low-retardance regions as regions I in Fig. 1c, and the regions in between as regions II (Fig. S1).
To probe the alignment in the gap thickness direction, we use fluorescence confocal polarising microscopy. A low fluorescence intensity I indicates an alignment of the director in the y-direction, a high fluorescence intensity indicates an alignment of the director in either the flow direction (x-direction) or the gap thickness direction (z-direction)39. In region II, the stripes exhibit alternatively high and low fluorescence intensity when measured at the bottom layer of the microfluidic cell. As we scan across the gap thickness towards the top layer of the microfluidic cell, the fluorescence intensity switches; dark regions become bright, and bright regions become dark, indicating an alternating twist deformation for adjacent stripes in the gap thickness direction, as shown in Fig. 1a, e.
The combination of the periodic twist deformation in the flow direction and the alternating twist deformation in the gap thickness direction results in a periodic double-twist structure, as schematically shown in Fig. 1f. To further verify that the periodic double-twist structure corresponds to the stripe pattern, we calculate the normalised light intensity averaged over the gap thickness from a simulated director field (see ‘Methods’); the retardance map is in good agreement with the experimentally observed pattern (Fig. 1g). The periodic double-twist structure is remarkable in two aspects: (i) It is a chiral structure built by an achiral nematic liquid crystal, which involves a mirror symmetry breaking, and (ii) the structure possesses a well-defined characteristic period despite the absence of a pitch length in the achiral building blocks.
Mechanism of mirror symmetry breaking
To reveal the mechanism of mirror symmetry breaking, we analyse the dynamics of the director field associated with the different elastic deformation modes induced by the flow. Looking at a larger section of the cell through a crossed polariser, an analyser, and a full-wave-plate optical compensator with its slow axis, \({\overrightarrow{\lambda }}_{{{{{{{{\rm{g}}}}}}}}}\), oriented at 45° to the polariser, we observe uniform regions surrounding the stripe pattern that appear alternatively blue and yellow. This observation, together with a quantification of the director field using a PolScope, demonstrates that the director rotates in opposite directions in the different uniform domains, as shown in Fig. 2a, b. This rotated director field results from the competition between the shear flow and the elastic deformation induced by the flow as the director resists deviation from the surface anchoring condition. At low shear rates, the tumbling DSCG director aligns perpendicular to the flow direction along the y-direction, adopting a log-rolling state that avoids the energetically costly splay and bend modes associated with a director deformation in the shear plane38,40. The log-rolling state, however, is inconsistent with the surface anchoring condition. This causes the director to rotate in the xy-plane (Fig. S2) adopting average azimuthal angles of φ ≈ 65° and φ ≈ 115°, as shown in Fig. 2c. Given that the cylindrical DSCG aggregates are symmetric, left- and right-handed rotations are stochastically equivalent. At the boundary of two domains with oppositely rotated director fields, a splay deformation forms that is either open to the flow direction, denoted as divergent splay deformation or closed to the flow direction, denoted as convergent splay deformation. Remarkably, the stripe patterns only form at the boundaries with convergent splay deformation. By contrast, at the boundaries with divergent splay deformation a splay wall forms that appears as a sharp line in Fig. 2a41.
Divergent and convergent splay deformations cost the same amount of energy; why is the divergent splay deformation stable at a splay wall but the convergent splay deformation unstable evolving into stripe patterns? The answer lies in the three-dimensional director field at the boundary of the domains. Indeed, in addition to the splay deformation in the xy-plane, the shear torques induced by the pressure-driven flow in the gap of the microfluidic cell induce a divergent splay deformation across the gap thickness, as shown in the inset of Fig. 2c. The deformation of the director field is reflected in the value of the gap-averaged polar angle θ ≈ 45°, which deviates from the initial planar alignment as a result of the tumbling property of nematic LCLC solutions38,40,42,43, as shown in Fig. 2c. The combination of the convergent splay deformation in the xy-plane and the divergent splay deformation in the xz-plane induces a biaxial-splay configuration in which the director field undergoes a twist deformation when rotating about the symmetry line of the splay deformations with a rotation angle, β, as schematically shown in Fig. 2d, e. By contrast, the divergent splay deformations in both planes induce a double-splay configuration44,45.
The observation that periodic double-twist structures are triggered at regions with biaxial-splay configuration, but not at regions with double-splay configuration, suggests different dynamics of the director field for these two configurations. Analysing the nematodynamic equations describing the dynamics of the director near the walls of the microfluidic cell (at z = 0 and z = b), we find that the two configurations have different stable solutions dictated by the saddle-splay elasticity. In the Frank-Oseen elastic energy density \(f=(1/2)[{K}_{1}{\left(\nabla \cdot {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,+\,{K}_{2}{\left({{{{{{{\bf{n}}}}}}}}\cdot \nabla \times {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,+\,{K}_{3}{\left({{{{{{{\bf{n}}}}}}}}\times \nabla \times {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,-\,{K}_{24}\nabla \cdot \left({{{{{{{\bf{n}}}}}}}}(\nabla \cdot {{{{{{{\bf{n}}}}}}}})+{{{{{{{\bf{n}}}}}}}}\times (\nabla \times {{{{{{{\bf{n}}}}}}}})\right)]\), where n is the director field and K1, K2, K3 and K24 are the splay, twist, bend and saddle-splay Frank elastic constants, the saddle-splay term enters the free energy only through the boundary conditions at the walls, given that it is a pure divergence term46. On a flat surface and when the surface anchoring condition or the bulk elastic energy are dominant, the saddle-splay term is typically neglected29. The polar surface anchoring strength of DSCG solutions, however, has been reported to be weak, on the order of 10−6 J/m2 (ref. 47) (see Supplementary Information). When the flow induces a biaxial-splay or a double-splay configuration, the director near the walls of the microfluidic cell can thus deviate from the anchored state. This leads to spatial gradients of the director field in the orthogonal directions near the walls. As a consequence, the saddle-splay term plays here an important role. The director deformation at the walls of the microfluidic cell ultimately affects the director field in the bulk. To probe the stability of the biaxial-splay and double-splay configurations under perturbations, we consider the director field \({{{{{{{\bf{n}}}}}}}}=\left(\sin \theta \cos \varphi,\sin \theta \sin \varphi,\cos \theta \right)\) at the boundaries of the domains forming the biaxial-splay and double-splay regions. In steady-state flow, the polar angle θ and the azimuthal angle φ are constant in the flow direction: dφ/dx = 0 and dθ/dx = 0. Further assuming that φ ≈ 0° at the boundaries of domains with oppositely rotated director fields, the nondimensionalised nematodynamic equation at the top wall of the microfluidic cell reads (see Supplementary Information):
where t* = t/τ, y* = y/w, and z* = z/b, with τ the characteristic relaxation time of the director, and w the characteristic width of the double-splay and biaxial-splay configurations. We define \(\bar{k}=\frac{kw}{{\overline{K}}{{\tau }}}\), where k is related to the rotational viscosity of the DSCG solution and \(\bar{K}=({K}_{1}+{K}_{3})/2\) is an average elastic constant. The surface gradient of θ in the z-direction, \({(\partial \theta /\partial {z}^{*})}_{surface}=\) 0.836, is solved numerically from the bulk nematodynamic equation (Figs. S3 and S4). For the director at the walls of the microfluidic cell where the flow velocity is zero because of no-slip boundary conditions, (dθ/dt)surface = 0 and Eq. (1) yields a solution for the polar angle at the top wall θs ≈ 57° for the biaxial-splay configuration and θs ≈ 33° for the double-splay configuration. We now probe whether these are stable angles for the two configurations. For the double-splay configuration, the gradient of φ in the y-direction, ∂φ/∂y* is positive. When θ is perturbed to an angle smaller than θs, the right-hand side of Eq. (1) becomes positive. The term dθ/dt* is then positive and θ increases back to θs. Inversely, when θ is perturbed to an angle larger than θs, dθ/dt* < 0 and θ decreases back to θs, as shown in Fig. 2f, where the arrows indicate the direction towards which the director relaxes after a perturbation. The director thus always returns to θs, and the double-splay configuration is stabilised and forms a splay wall. In contrast, for the biaxial-splay configuration, ∂φ/∂y < 0 and the director will not return to θs upon perturbation but evolve to either a homeotropic alignment (θ = 0°) or a planar alignment (θ = 90°). We show in the Supplementary Information (Figs. S3–S5) that due to the weak surface anchoring, the director evolves to a homeotropic alignment, which is unstable due to the mismatch with the surface anchoring condition and the non-zero viscous torque acting on the director field. There are two possible lower energy states out of the biaxial-splay configuration: a double-twist and a double-splay configuration. By analysing the Frank-Oseen elastic energy density for each configuration, we find that the double-twist configuration costs the least elastic free energy (see Supplementary Information and Fig. S6) and is therefore selected. We further rationalise the selection of the double-twist configuration by examining the elastic powers of splay, twist, and bend deformations in hybrid lattice-Boltzmann simulations. The elastic power of twist is indeed much larger than the elastic powers of splay and bend (see Supplementary Information and Fig. S7).
The biaxial-splay configuration that is the precursor for the periodic double-twist configuration emerges because of the imposed surface anchoring parallel to the flow direction. The stripe patterns do not form if we modify the surface anchoring condition so the director is planar and aligned in the y-direction; under these conditions, we observe a stable log-rolling state for a comparable range of flow velocities.
We determine the handedness of the periodic double-twist configuration using hybrid lattice-Boltzmann simulations. The twist deformations in the x- and z-directions exhibit the same handedness (see Fig. S8 and Table S1), which can be understood by considering that opposite-handedness configurations would necessitate energetically costly splay deformations in addition to the twist deformations. Across 21 independent simulations, we find an unbiased selection between left- and right-handed configurations, as shown in Table S1. This is a reflection of the DSCG aggregates’ inherent achirality and the absence of external biases, underscoring the spontaneous nature of the mirror symmetry breaking. The elastic instability of the flow-induced biaxial-splay configuration of the director field provides a unique pathway to mirror symmetry breaking, where flow both triggers and stabilises the chiral periodic double-twist structure.
Period of double-twist structures
The second remarkable characteristics of the stripe patterns is their periodicity. Periodic structures frequently appear in cholesteric liquid crystals where they result from the intrinsic pitch length of the material. In achiral nematic liquid crystals, however, they are rarely observed22.
The period of the stripes that reflects the period of the double-twist structure, p, decreases with a power law with exponent ≈ − 0.5 with increasing velocity of the stripes, V, and increases with the gap thickness b, as shown in Fig. 3a. To rationalise these observations, we consider that the elastic deformation modes in the periodic double-twist configuration are predominantly bend and twist deformations. Given the small value of the twist Frank elastic constant, the bend mode dominates over the twist mode and competes with the viscous torque from the flow. We hypothesise that this competition sets the period of the structures. To probe this hypothesis, we consider the director field in the region of bend deformation, \({{{{{{{\bf{n}}}}}}}}=\left(\sin \theta,0,\cos \theta \right)\). With the assumption that θ ≈ 90° in this region, the nematodynamic equation reads (see Supplementary Information)46:
where α3 is a Leslie viscosity coefficient and \({\dot{\gamma }}_{xz}\) is the shear rate in the xz-plane. A scaling analysis yields \({\partial }^{2}\theta /\partial {x}^{2}\propto -1/{\left({p}_{c}/2\right)}^{2}\) and \({\dot{\gamma }}_{xz}\,\propto \,V/b\) (see Supplementary Information), which provides a characteristic period,
Normalising p with pc indeed rescales all the data onto a master curve, as shown in Fig. 3b. We report p/pc versus the Ericksen number Er = ηeffVb/K3, where ηeff ≈ 0.43 Pa s is the effective viscosity measured using a stress-controlled rheometer (AR-G2, TA Instruments, Fig. S9), and K3 ≈ 10 pN is the bend Frank elastic constant38,48. The stripes emerge for Ericksen numbers of order one, corroborating that the periodic double-twist structure emerges when the bend elastic torque competes with the viscous torque from the shear flow.
It is interesting to note that the configuration of the periodic double-twist structure is reminiscent of the periodic chiral structures that result from the Helfrich-Hurault elastic instability in cholesteric liquid crystals, where the period is set by the competition between the bend deformation and the pitch length-induced twist deformations49. For the achiral DSCG solutions that do not have an intrinsic pitch length, it is instead the viscous torque that resists the bend elastic deformation. Mirror symmetry breaking has further been observed in Williams domains forming under oscillatory shear, where the twist deformations are in the cell thickness direction20,21. In a related context, transient stripe patterns have been observed in LCLC solutions during the relaxation of the director field from a planar alignment to a homeotropic alignment imposed by the surface anchoring conditions50. Here, we show that steady flow can induce and stabilise chiral structures that extend periodically in the flow direction. The mirror symmetry breaking is facilitated by the tumbling character of the LCLC solution that triggers the three-dimensional director field to form a biaxial-splay configuration. This biaxial-splay configuration is unstable, as dictated by the saddle-splay elasticity, and evolves to a lower energy state, a chiral double-twist structure, as a consequence of the small twist Frank elastic constant of LCLC solutions. A similar emergence of chirality might occur in other nematic materials that share the characteristics of tumbling and a small twist Frank elastic constant, for example in liquid crystal polymers and three-dimensional active nematics30,51,52. The ease with which the macroscopic chiral structures can be induced could be exploited to create programmable scaffolds for transmitting or detecting chirality at the molecular level53,54,55,56.
Methods
Experimental methods
Nematic disodium cromoglycate (DSCG) (TCI America, purity > 98.0 %) solutions are prepared by dissolving DSCG in deionized water at 13.0 wt%30. The sample is heated to T ≈ 90 °C where it is in the isotropic phase, which allows the DSCG to fully dissolve in water. The solution is then cooled to room temperature (T = 23.2 ± 0.5 °C) where it adopts the nematic phase30,31.
The microfluidic cell consists of two glass plates separated by 8–26 μm spacers (Specac, MY SPR RECT, OMNI). The width of the microfluidic cell is 40 mm, and the length is 50 mm. To avoid potential pulsatile effects inherent to syringe pump-controlled flows and to ascertain a uniform velocity profile at the inlet, we connect a reservoir of 25 mm in height, 40 mm in width, and 2–3 mm in interior thickness to one end of the microfluidic cell. Both cell surfaces are treated to introduce a uniform planar anchoring condition along the flow direction by following a protocol of surface rubbing, where the glass plates are rubbed along the cell length direction using a diamond particle paste with a particle diameter of ≈ 50 nm (TechDiamondTools)57.
To obtain the stripe patterns, the nematic DSCG solution is injected into the microfluidic cell through a 1 mm diameter hole at the top of the reservoir at controlled volumetric flow rates ranging between q = 0.25–0.45 μl/min. The volumetric flow rate is set by a syringe pump (Harvard PHD 2000). We ensure the robustness of our findings by conducting tests utilising different microfluidic cells and syringe pumps, including cells without a reservoir. The stripe patterns consistently form for the same range of flow velocities, demonstrating that the stepping action of the syringe pump does not affect the results.
The flow field is observed through crossed polarisers and a static full-wave-plate optical compensator (560 nm) with the slow axis oriented at 45° to the polarisers, using an optical microscope (OMAX M837T) with objectives of magnification M = 4× and numerical aperture NA = 0.1, and M = 10× and NA = 0.25. This setup allows to us identify the director field averaged in the gap thickness direction. We further quantify the director field averaged in the gap thickness direction using a PolScope with M = 5× and NA = 0.15 (OpenPolScope).
We employ fluorescence confocal polarising microscopy (Leica SP5) with a water immersion objective of magnification M = 25× and numerical aperture NA = 0.95 to determine the director field of the stripe patterns in the gap thickness direction. We add fluorescent molecules (Acridine Orange, Biotium) at a concentration of 100 ppm to the DSCG solutions. In nematic DSCG solutions, the fluorescent molecules align with the orientation of the disk-like DSCG molecules that are perpendicular to the orientation of the director. The polarised probing beam excites the fluorescent molecules and induces fluorescence. The efficiency of excitation depends on the angle between the transition dipole of the fluorescent molecules and the polarisation of the probing beam39. A high fluorescence intensity indicates that the polarisation of the probing beam is parallel to the fluorescent molecules and thus perpendicular to the director of the DSCG aggregates. A low fluorescence intensity indicates that the polarisation of the probing beam is perpendicular to the fluorescent molecules and thus parallel to the director of the DSCG aggregates. In our experiments, the polarisation of the probing beam is perpendicular to the flow direction. When capturing the director field in the gap thickness direction, we scan eight layers from the top wall to the bottom wall of the microfluidic cell. During the scan, the stripe pattern moves with the flow. We therefore analyse the images in a Lagrangian framework in the frame of reference of the stripes. While taking the fluorescence images, we simultaneously capture images through crossed polariser and analyser. This allows us to trace the displacement of the stripes during the scanning process, and to correspondingly shift the region of interest for each layer to account for the motion of the stripes.
Numerical methods
The numerical simulations employ the Leslie-Ericksen theory to account for the dynamics of the director in the regions where the director adopts specific splay configurations in a pressure-driven flow in a microfluidic cell of gap thickness b. The velocity field u and the unit-vector director field n are used to describe the nematodynamics of the nematic liquid crystal solution. The polar angle θ and the azimuthal angle φ describe the director field n = \(\left(\sin \theta \cos \varphi,\sin \theta \sin \varphi,\cos \theta \right)\). The director field n in a steady-state flow is governed by the nematodynamic equation46:
where γ1 is the rotational viscosity, \({\delta }_{ij}^{\perp }\) is the transverse Kronecker delta, \({W}_{ik}=\frac{1}{2}\left(\frac{\partial {u}_{i}}{\partial {x}_{k}}-\frac{\partial {u}_{k}}{\partial {x}_{i}}\right)\) and \({A}_{jk}=\frac{1}{2}\left(\frac{\partial {u}_{j}}{\partial {x}_{k}}+\frac{\partial {u}_{k}}{\partial {x}_{j}}\right)\) are the antisymmetric and symmetric parts of the velocity gradients, and \(\lambda=\frac{{\alpha }_{2}+{\alpha }_{3}}{{\alpha }_{2}-{\alpha }_{3}}\) with α2 and α3 the Leslie viscosity coefficients. \({h}_{i}=-\frac{\partial f}{\partial {n}_{i}}+\frac{\partial }{\partial {x}_{j}}\left(\frac{\partial f}{\partial (\partial {n}_{i}/\partial {x}_{j})}\right)\), where \(f=1/2[{K}_{1}{\left(\nabla \cdot {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,+\,{K}_{2}{\left({{{{{{{\bf{n}}}}}}}}\cdot \nabla \times {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,+\,{K}_{3}{\left({{{{{{{\bf{n}}}}}}}}\times \nabla \times {{{{{{{\bf{n}}}}}}}}\right)}^{2}\,-\,{K}_{24}\nabla \cdot \left({{{{{{{\bf{n}}}}}}}}(\nabla \cdot {{{{{{{\bf{n}}}}}}}})\,+{{{{{{{\bf{n}}}}}}}}\times (\nabla \times {{{{{{{\bf{n}}}}}}}})\right)]\) is the Oseen-Frank elastic energy density. K1, K2, K3 and K24 are the splay, twist, bend and saddle-splay Frank elastic constants. Here, we focus on the configuration of the director field at the domain walls created by the flow-induced divergent or convergent splay configurations in the xz-plane, which allows us to simplify the nematodynamic equation into one-dimensional governing equations. We further note that φ ≈ 0° and \(\frac{\partial \varphi }{\partial z}\approx 0\) at the domain walls. We approximate \({K}_{1}\approx {K}_{3}\approx \bar{K}\approx ({K}_{1}+{K}_{3})/2\), as K1 and K3 are of the same order of magnitude30. Eq. (4) then simplifies to
where \({\dot{\gamma }}_{xz}=\frac{\partial {u}_{x}}{\partial z}\) is the shear rate and ux is the velocity in the x-direction.
To describe the velocity field u in the x-direction, we employ a linear momentum equation46:
where G is the pressure gradient in the x-direction. ηeff is the effective viscosity, which is a function of the director field n and can be expressed as46
where α1 and α4 are the Leslie viscosity coefficients and ηb and ηc are the Miesowicz viscosities46,58.
We nondimensionalise Eqs. (5), (6) and (7) using z = bz*, \({u}_{x}=\frac{G{b}^{2}}{{\alpha }_{2}}{u}_{x}^{*}\), \({\eta }_{eff}^{*}=\frac{{\eta }_{eff}}{{\alpha }_{2}}\) and \({\dot{\gamma }}_{xz}^{*}=\frac{\partial {u}_{x}^{*}}{\partial {z}^{*}}\):
where the Leslie viscosity coefficients are chosen to satisfy the tumbling character of flowing nematic lyotropic chromonic liquid crystal (LCLC) solutions; α1 = − 0.0181 Pa s, α2 = − 0.1104 Pa s, α3 = 0.0011 Pa s, ηb = 0.0251 Pa s and ηc = 0.1355 Pa s30. We numerically solve Eqs. (8) and (9) using the finite difference method, applying no-slip boundary conditions59. To account for the weak surface anchoring strength of LCLC solutions on our surface-treated glass plates60, where the director can deviate from the initial surface anchoring condition in shear flow, we mimic finite surface anchoring conditions in our simulations that intrinsically have infinite surface anchoring conditions by assigning polar angles on the top and bottom walls of the microfluidic cell, θb,top and θb,bottom, where θb,bottom = 180° − θb,top. We then test various θb,top and θb,bottom within the range of 45° to 90° to find the polar angles that correctly reflect the weak surface anchoring strength61.
In Eq. (8), values are assigned to \(G{b}^{3}/\bar{K}\) based on experimental conditions and measurable variables. By scaling G with \(-{\alpha }_{2}\bar{V}/{b}^{2}\), we express \(G{b}^{3}/\bar{K}=-{\alpha }_{2}\bar{V}b/\bar{K}\equiv {{{{{{{{\rm{Er}}}}}}}}}_{{{{{{{{\rm{av}}}}}}}}}\), where \(\bar{V}=q/A\) is the average flow velocity, q is the volumetric flow rate and A is the cross-sectional area of the microfluidic cell. This yields Ericksen numbers Erav in the range of 25–50 (corresponding to Er = ηeffVb/K3 = 0.65–1.25 using the definition employed in the main manuscript).
To access the azimuthal angles at the domain walls, we employ the hybrid lattice-Boltzmann method where the director field of the nematic solution is described by the tensorial order parameter Q and the hydrodynamics by the velocity vector u. For a uniaxial nematic liquid crystal, Q = S(nn − I/3), where S is the scalar order parameter and I is the identity tensor. By defining the strain rate D = ( ∇ u + (∇u)T)/2 and the vorticity Ω = ( ∇ u − (∇u)T)/2, we introduce an advection term \({{{{{{{\bf{S}}}}}}}}=(\xi {{{{{{{\bf{D}}}}}}}}+{{{{{{{\boldsymbol{\Omega }}}}}}}})\cdot ({{{{{{{\bf{Q}}}}}}}}+\frac{{{{{{{{\bf{I}}}}}}}}}{3})+({{{{{{{\bf{Q}}}}}}}}+\frac{{{{{{{{\bf{I}}}}}}}}}{3})\cdot (\xi {{{{{{{\bf{D}}}}}}}}-{{{{{{{\boldsymbol{\Omega }}}}}}}})-2\xi ({{{{{{{\bf{Q}}}}}}}}+\frac{{{{{{{{\bf{I}}}}}}}}}{3})({{{{{{{\bf{Q}}}}}}}}:{{{{{{{\boldsymbol{\nabla }}}}}}}}{{{{{{{\bf{u}}}}}}}})\), where ξ is a constant that depends on the molecular details of the liquid crystal. We use ξ = 0.6 for our tumbling nematic LCLC solutions61.
The governing equation of the Q-tensor, i.e., the Beris-Edwards equation, is62
where Γ is related to the rotational viscosity via \({\gamma }_{1}=2{S}_{0}^{2}/{{\Gamma }}\) with S0 the equilibrium scalar order parameter63. H is the molecular field defined as \({{{{{{{\bf{H}}}}}}}}=-(\frac{\delta F}{\delta {{{{{{{\bf{Q}}}}}}}}}-\frac{{{{{{{{\bf{I}}}}}}}}}{3}{{{{{{{\rm{Tr}}}}}}}}(\frac{\delta F}{\delta {{{{{{{\bf{Q}}}}}}}}}))\) that drives the system towards thermodynamic equilibrium with a free energy functional F = ∫bulk fLdGdV + ∫bulk felasticdV + ∫surface fsurface dS. The first term is the short-range Landau-de Gennes free energy density \({f}_{LdG}=\frac{{A}_{0}}{2}(1-\frac{U}{3}){{{{{{{\rm{Tr}}}}}}}}({{{{{{{{\bf{Q}}}}}}}}}^{2})-\frac{{A}_{0}U}{3}{{{{{{{\rm{Tr}}}}}}}}({{{{{{{{\bf{Q}}}}}}}}}^{3})\,+\frac{{A}_{0}U}{4}{({{{{{{{\rm{Tr}}}}}}}}({{{{{{{{\bf{Q}}}}}}}}}^{2}))}^{2}\), where A0 and U are material constants41. The second term is the long-range elastic energy density \({f}_{elastic}=\frac{1}{2}{L}_{1}{Q}_{ij,k}{Q}_{ij,k}+\frac{1}{2}{L}_{2}{Q}_{jk,k}{Q}_{jl,l}+\frac{1}{2}{L}_{3}{Q}_{ij}{Q}_{kl,i}{Q}_{kl,j}+\frac{1}{2}{L}_{4}{Q}_{jk,l}{Q}_{jl,k}\), where Qij,k denotes ∂kQij using the Einstein summation convention64. The elastic constants L1 to L4 can be mapped onto the Frank elastic constants via65:
The bulk elastic free energy density, fbulk is the sum of felastic and fLdG. The surface elastic free energy density \({f}_{surface}=\frac{1}{2}W{({{{{{{{\bf{Q}}}}}}}}-{{{{{{{{\bf{Q}}}}}}}}}_{surface})}^{2}\) imposes a surface anchoring boundary condition to the Q-tensor by quadratically penalising any deviation of Q on a surface from the order parameter Qsurface ≡ S0(nsurfacensurface − I/3) imposed by the surface anchoring condition59. The parameter W is the surface anchoring strength. We consider polar surface anchoring, nsurface = x, with x a unit director along the x-direction. The polar surface anchoring is weak with W = 0.02 (in simulation units).
The local fluid density ρ and the velocity u are governed by the Navier-Stokes equation66,67
The viscoelastic properties of the nematic LC solution are lumped in the passive stress Π that is the sum of the viscous and elastic terms59,63:
where η is the isotropic viscosity and P0 is the isotropic bulk pressure. We consider a pressure-driven flow along the x-direction.
We employ the hybrid lattice-Boltzmann method to solve the coupled governing partial differential Eq. (11) and Eq. (13)59,66,67. The simulation box size is [Lx, Ly, Lz] = [5, 51, 5], and we have periodic boundary conditions in the x- and y-directions. We choose the following parameters: η = 1/3, Γ = 0.1, ξ = 0.6 and U = 3.5, which results in S0 ≃ 0.62. We further use A0 = 0.1, L1 = 0.1, L2 = 0, L3 = 0.3247, and L4 = 0.133, corresponding to \({K}_{1}=3{K}_{2}=\frac{1}{3}{K}_{3}={K}_{24}\) in Eq. (12) for flow-tumbling nematic LCLC solutions68. No-slip boundary conditions are imposed at the two walls of the microfluidic cell.
Simulated director field of the stripe pattern
To reconstruct the three-dimensional director field of the stripe pattern, we use continuum simulations to generate a nematic director field that satisfies the experimentally observed director field, starting the simulation with an ansatz that is consistent with the twisted structure observed in the experiments. The structure is then stabilised by minimising the free energy of the system64. The equilibrated director field is processed to generate a crossed-polarised image69, which agrees well with the experimental image supporting the validity of the reconstructed director field.
Data availability
The authors declare that the data supporting the findings of this study are available within the text, including in the Methods section and Source Data files. Source data are provided in this paper.
Code availability
The code used in this study is available on Zenodo under the accession code: https://doi.org/10.5281/zenodo.10155871.
References
Joyce, G. et al. Chiral selection in poly(C)-directed synthesis of oligo(G). Nature 310, 602–604 (1984).
Xiao, W. et al. Microscopic origin of chiral shape induction in achiral crystals. Nat. Chem. 8, 326–330 (2016).
Inaki, M., Liu, J. & Matsuno, K. Cell chirality: its origin and roles in left–right asymmetric development. Philos. Trans. R. Soc. B: Biol. Sci. 371, 20150403 (2016).
Noyori, R. Asymmetric catalysis: science and opportunities (nobel lecture). Angew. Chem. Int. Ed. 41, 2008–2022 (2002).
MacKenzie, L. E. & Stachelek, P. The twists and turns of chiral chemistry. Nat. Chem. 13, 521–522 (2021).
Brandt, J. R., Salerno, F. & Fuchter, M. J. The added value of small-molecule chirality in technological applications. Nat. Rev. Chem. 1, 1–12 (2017).
Nakajima, R. et al. Giant spin polarization and a pair of antiparallel spins in a chiral superconductor. Nature 613, 479–484 (2023).
Pokroy, B., Kang, S. H., Mahadevan, L. & Aizenberg, J. Self-organization of a mesoscale bristle into ordered, hierarchical helical assemblies. Science 323, 237–240 (2009).
Nych, A., Fukuda, J.-i, Ognysta, U., Žumer, S. & Muševič, I. Spontaneous formation and dynamics of half-skyrmions in a chiral liquid-crystal film. Nat. Phys. 13, 1215–1220 (2017).
Wu, W. et al. Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review. Mater. Des. 180, 107950 (2019).
Čopar, S., Kos, Ž., Emeršič, T. & Tkalec, U. Microfluidic control over topological states in channel-confined nematic flows. Nat. Commun. 11, 59 (2020).
Liang, X.-Q. et al. Revealing the chirality origin and homochirality crystallization of Ag14 nanocluster at the molecular level. Nat. Commun. 12, 4966 (2021).
Lavrentovich, O. D. Design of chiral domains by surface confinement of liquid crystals. ACS Cent. Sci. 6, 1858–1861 (2020).
Ma, X. et al. Meta-chirality: fundamentals, construction and applications. J. Nanomater. 7, 116 (2017).
Gibaud, T. et al. Reconfigurable self-assembly through chiral control of interfacial tension. Nature 481, 348–351 (2012).
Jákli, A., Lavrentovich, O. D. & Selinger, J. V. Physics of liquid crystals of bent-shaped molecules. Rev. Mod. Phys. 90, 045004 (2018).
Tschierske, C. Mirror symmetry breaking in liquids and liquid crystals. Liq. Cryst. 45, 2221–2252 (2018).
Alaasar, M. et al. Polar order, mirror symmetry breaking, and photoswitching of chirality and polarity in functional bent-core mesogens. Eur. J. Chem. 25, 6362–6377 (2019).
Link, D. et al. Spontaneous formation of polar chiral layers from achiral molecules in a novel antiferroelectric liquid crystal phase. Science 278, 1924 (1997).
Clark, M., Saunders, F., Shanks, I. & Leslie, F. A study of flow alignment instability during rectilinear oscillatory shear of nematics. Mol. Cryst. Liq. Cryst. 70, 195–222 (1981).
Mullin, T. & Peacock, T. Hydrodynamic instabilities in nematic liquid crystals under oscillatory shear. Proc. Math. Phys. Eng. Sci. 455, 2635–2653 (1999).
Lavrentovich, O. & Pergamenshchik, V. Periodic domain structures in thin hybrid nematic layers. Mol. Cryst. Liq. Cryst. 179, 125–132 (1990).
Ondris-Crawford, R., Crawford, G., Zumer, S. & Doane, J. Curvature-induced configuration transition in confined nematic liquid crystals. Phys. Rev. Lett. 70, 194 (1993).
Tortora, L. & Lavrentovich, O. D. Chiral symmetry breaking by spatial confinement in tactoidal droplets of lyotropic chromonic liquid crystals. Proc. Natl. Acad. Sci. USA 108, 5163–5168 (2011).
Nych, A. et al. Chiral bipolar colloids from nonchiral chromonic liquid crystals. Phys. Rev. E 89, 062502 (2014).
Jeong, J., Davidson, Z. S., Collings, P. J., Lubensky, T. C. & Yodh, A. Chiral symmetry breaking and surface faceting in chromonic liquid crystal droplets with giant elastic anisotropy. Proc. Natl. Acad. Sci. USA 111, 1742–1747 (2014).
Jeong, J. et al. Chiral structures from achiral liquid crystals in cylindrical capillaries. Proc. Natl. Acad. Sci. USA 112, E1837–E1844 (2015).
Ettinger, S. et al. Rods in a lyotropic chromonic liquid crystal: emergence of chirality, symmetry-breaking alignment, and caged angular diffusion. Soft Matter 18, 487–495 (2022).
Nayani, K. et al. Spontaneous emergence of chirality in achiral lyotropic chromonic liquid crystals confined to cylinders. Nat. Commun. 6, 1–7 (2015).
Zhou, S. In Lyotropic Chromonic Liquid Crystals: From Viscoelastic Properties to Living Liquid Crystals. 51–75 (Springer, 2017).
Zimmermann, N., Jünnemann-Held, G., Collings, P. J. & Kitzerow, H.-S. Self-organized assemblies of colloidal particles obtained from an aligned chromonic liquid crystal dispersion. Soft Matter 11, 1547–1553 (2015).
Dietrich, C. F., Collings, P. J., Sottmann, T., Rudquist, P. & Giesselmann, F. Extremely small twist elastic constants in lyotropic nematic liquid crystals. Proc. Natl. Acad. Sci. USA 117, 27238–27244 (2020).
Davidson, Z. S. et al. Chiral structures and defects of lyotropic chromonic liquid crystals induced by saddle-splay elasticity. Phys. Rev. E 91, 050501 (2015).
Ellis, P. W. et al. Curvature-induced twist in homeotropic nematic tori. Phys. Rev. Lett. 121, 247803 (2018).
Kos, Ž. & Ravnik, M. Relevance of saddle-splay elasticity in complex nematic geometries. Soft Matter 12, 1313–1323 (2016).
Xia, Y. et al. Programming emergent symmetries with saddle-splay elasticity. Nat. Commun. 10, 1–9 (2019).
Park, G. et al. Periodic arrays of chiral domains generated from the self-assembly of micropatterned achiral lyotropic chromonic liquid crystal. ACS Cent. Sci. 6, 1964–1970 (2020).
Baza, H. et al. Shear-induced polydomain structures of nematic lyotropic chromonic liquid crystal disodium cromoglycate. Soft Matter 16, 8565–8576 (2020).
Lavrentovich, O. Fluorescence confocal polarizing microscopy: Three-dimensional imaging of the director. Pramana 61, 373–384 (2003).
Zhang, Q. et al. Structures and topological defects in pressure-driven lyotropic chromonic liquid crystals. Proc. Natl. Acad. Sci. USA 118, e2108361118 (2021).
De Gennes, P.-G. & Prost, J. The Physics of Liquid Crystals (Oxford University Press, 1993).
Ge, B. et al. Single-shot quantitative polarization imaging of complex birefringent structure dynamics. ACS Photon.8, 3440–3447 (2021).
Zhang, Q., Zhou, S., Zhang, R. & Bischofberger, I. Dendritic patterns from shear-enhanced anisotropy in nematic liquid crystals. Sci. Adv. 9, eabq6820 (2023).
Selinger, J. V. Interpretation of saddle-splay and the Oseen-Frank free energy in liquid crystals. Liq. Cryst. Rev. 6, 129–142 (2018).
Selinger, J. V. Director deformations, geometric frustration, and modulated phases in liquid crystals. Annu. Rev. Condens. Matter Phys. 13, 49–71 (2022).
Kleman, M. & Lavrentovich, O. D. Soft Matter Physics: an Introduction (Springer Science & Business Media, 2007).
Zhou, S. et al. Dynamic states of swimming bacteria in a nematic liquid crystal cell with homeotropic alignment. N. J. Phys. 19, 055006 (2017).
Zhou, S. et al. Elasticity, viscosity, and orientational fluctuations of a lyotropic chromonic nematic liquid crystal disodium cromoglycate. Soft Matter 10, 6571–6581 (2014).
Helfrich, W. Deformation of cholesteric liquid crystals with low threshold voltage. Appl. Phys. Lett. 17, 531–532 (1970).
Jeong, J. et al. Homeotropic alignment of lyotropic chromonic liquid crystals using noncovalent interactions. Langmuir 30, 2914–2920 (2014).
Duclos, G. et al. Topological structure and dynamics of three-dimensional active nematics. Science 367, 1120–1124 (2020).
Turiv, T. et al. Polar jets of swimming bacteria condensed by a patterned liquid crystal. Nat. Phys. 16, 481–487 (2020).
Yokoi, H., Kinoshita, T. & Zhang, S. Dynamic reassembly of peptide RADA16 nanofiber scaffold. Proc. Natl Acad. Sci. USA 102, 8414–8419 (2005).
Derr, N. D. et al. Tug-of-war in motor protein ensembles revealed with a programmable DNA origami scaffold. Science 338, 662–665 (2012).
Morrow, S. M., Bissette, A. J. & Fletcher, S. P. Transmission of chirality through space and across length scales. Nat. Nanotechnol. 12, 410–419 (2017).
Le Guennec, M. et al. A helical inner scaffold provides a structural basis for centriole cohesion. Sci. Adv. 6, eaaz4137 (2020).
Parry-Jones, L. In Handbook of Visual Display Technology (Springer, 2016).
Miesowicz, M. The three coefficients of viscosity of anisotropic liquids. Nature 158, 27 (1946).
Zhang, R., Roberts, T., Aranson, I. S. & De Pablo, J. J. Lattice Boltzmann simulation of asymmetric flow in nematic liquid crystals with finite anchoring. J. Chem. Phys. 144, 084905 (2016).
McGinn, C. K., Laderman, L. I., Zimmermann, N., Kitzerow, H.-S. & Collings, P. J. Planar anchoring strength and pitch measurements in achiral and chiral chromonic liquid crystals using 90-degree twist cells. Phys. Rev. E 88, 062513 (2013).
Wang, W. & Zhang, R. Interplay of active stress and driven flow in self-assembled, tumbling active nematics. Crystals 11, 1071 (2021).
Beris, A. N. & Edwards, B. J. Thermodynamics of Flowing Systems: with Internal Microstructure (Oxford University Press, 1994).
Denniston, C., Orlandini, E. & Yeomans, J. M. Lattice Boltzmann simulations of liquid crystal hydrodynamics. Phys. Rev. E 63, 056702 (2001).
Ravnik, M. & Žumer, S. Landau–de gennes modelling of nematic liquid crystal colloids. Liq. Cryst. 36, 1201–1214 (2009).
Kumar, N., Zhang, R., de Pablo, J. J. & Gardel, M. L. Tunable structure and dynamics of active liquid crystals. Sci. Adv. 4, eaat7779 (2018).
Denniston, C., Marenduzzo, D., Orlandini, E. & Yeomans, J. Lattice Boltzmann algorithm for three–dimensional liquid–crystal hydrodynamics. Philos. Trans. Royal Soc. A 362, 1745–1754 (2004).
Sokolov, A., Mozaffari, A., Zhang, R., De Pablo, J. J. & Snezhko, A. Emergence of radial tree of bend stripes in active nematics. Phys. Rev. X 9, 031014 (2019).
Chang, R. Chiral Configurations from Achiral Lyotropic Chromonic Liquid Crystals under Confinements. Ph.D. thesis, Georgia Institute of Technology (2018).
Ellis, P. W., Pairam, E. & Fernández-Nieves, A. Simulating optical polarizing microscopy textures using Jones calculus: a review exemplified with nematic liquid crystal tori. J. Phys. D 52, 213001 (2019).
Acknowledgements
We thank A. Chen, Z. Wang and Z. Feng for assistance with the experiments and simulations. Q.Z. and I.B. acknowledge support from the National Science Foundation award number DMR-2245163. R.Z. and W.W. acknowledge support from the Hong Kong RGC grant no. 16300221 and no. 26302320. S.Z. acknowledges support from the National Science Foundation award number DMR-2239551 and the UMass Amherst startup fund.
Author information
Authors and Affiliations
Contributions
Q.Z. and I.B. designed the research. Q.Z. performed the experiments. Q.Z., W.W. and R.Z. performed theoretical analyses. W.W. and R.Z. performed the numerical simulations. Q.Z., W.W., S.Z., R.Z. and I.B. analysed the data and wrote the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhang, Q., Wang, W., Zhou, S. et al. Flow-induced periodic chiral structures in an achiral nematic liquid crystal. Nat Commun 15, 7 (2024). https://doi.org/10.1038/s41467-023-43978-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-43978-6
- Springer Nature Limited