Abstract
The direct and selective coupling of benzenes with aliphatic hydrocarbons is a promising strategy for C(sp2)-C(sp3) bond formation using readily available starting materials, yet it remains a significant challenge. In this study, we have developed a simplified photochemical system that incorporates catalytic amounts of iron(III) halides as multifunctional reagents and air as a green oxidant to address this synthetic problem. Under mild conditions, the reaction between a strong C(sp2)-H bond and a robust C(sp3)-H bond has been achieved, affording a broad range of cross-coupling products with high yields and commendable chemo-, site-selectivity. The iron halide acts as a multifunctional reagent that responds to visible light, initiates C-centered radicals, induces single-electron oxidation to carbocations, and participates in a subsequent Friedel-Crafts-type process. The gradual release of radical species and carbocation intermediates appears to be critical for achieving desirable reactivity and selectivity. This eco-friendly, cost-efficient approach offers access to various building blocks from abundant hydrocarbon feedstocks, and demonstrates the potential of iron halides in sustainable synthesis.
Similar content being viewed by others
Introduction
The direct and selective coupling of benzenes and low reactive aliphatic hydrocarbons, including alkanes and cycloalkanes, has garnered significant attention in the field of organic synthesis as an ideal strategy for C(sp2)-C(sp3) bond formation1,2,3,4,5. This method offers advantages in terms of both atoms and steps, while also benefiting from the abundance of starting materials. However, achieving desirable reactivity, chemo- and site-selectivity during the C-H cleavage and subsequent C-C formation is a challenging task due to the intrinsic inertness of various C-H bonds in these hydrocarbon feedstocks, as well as their high similarity in bond strength and chemical environment. For instance, benzene possesses a bond dissociation energy (BDE) of 110 kcal/mol, while (cyclo)alkanes typically have BDEs exceeding 96 kcal/mol6,7. Reactions of substituted benzenes involve ortho-, meta- and para-selectivity, whereas branched (cyclo)alkanes contain various primary, secondary, and tertiary C-H reaction sites (Fig. 1a)8,9,10,11. Side reactions such as polyalkylations, rearrangements, and self-couplings are also critical issues that must be taken into account12,13,14,15. Consequently, developing efficient systems to facilitate selective coupling reactions of unactivated C-H bonds, beyond those relying on directing groups or Minisci-type alkylation of heteroarenes16,17,18,19,20,21,22, represents an insurmountable challenge requiring a deep understanding of the complex interplay between reactivity, selectivity, and reaction conditions.
Despite significant efforts, very few strategies relying on functional catalysts, such as metal-modified zeolite, montmorillonite and heteropoly acid catalysts23,24, have shown potential in this aspect (Fig. 1b). For example, Goldman et al. demonstrated that the combination of pincer-ligated iridium catalysts and zeolites enabled an intramolecular reaction at 205 °C of an alkyl-H and an aryl-H bond in n-pentylbenzene, yielding 1-methyl-1,2,3,4-tetrahydronaphthalene in up to 32% yield25. Motokura et al. reported a direct C-H alkylation of benzene with alkanes and cycloalkanes at 150 °C for 64 h in the presence of montmorillonites as solid acid catalysts, which provided with 6–22% conversions and regioselectivities of 51–87%26,27. Chang et al. developed a copper-catalyzed C-H alkylation of polyfluoroarenes, a class of specific arenes of extremely electron-deficient features, with (cyclo)alkanes or other alkylating sources, delivering alkylbenzene products in 23–87% yields and with moderate to good regioselectivity28. New approaches to promote such transformations in a more sustainable and general way are strongly demanded.
Iron salts and complexes have long been recognized as attractive reagents and catalysts in organic synthesis, owing to the abundance of iron element on earth and its biocompatibility29,30,31. Recent studies have revealed the potential of iron salts in photochemical reactions, with the ability to activate and break aliphatic C-H bonds32,33,34,35,36. Building upon our experience with visible light-driven photochemical synthesis37,38,39, we aimed to develop an economical and environmentally friendly approach for the direct coupling of low-reactive C(sp2)-H and C(sp3)-H bonds under mild conditions (Fig. 1c). Our mechanistic hyphosis involves the use of a catalytic amount of an iron(III) halide (X = Cl, Br) to initiate the formation of alkyl radicals derived from C(sp3)-H precursors. The resulting radicals are then oxidized by FeIII, generating carbocation intermediates that undergo the subsequent Friedel-Crafts-type process to furnish alkylarene products. Air, acting as a mild oxidant, can oxidize the reduced iron species and regenerate FeIII for the next cycles. The gradual release of radical species and carbocations, along with the low concentrations of active intermediates, allow for useful reactivity and selectivity. Here, we show an iron(III) halide-enabled photochemical aerobic dehydrogenative coupling reaction between C(sp2)-H precursors (e.g., benzenes, phenols, phenol ethers, indoles, and pyrroles) and C(sp3)-H donors (e.g., benzylic, allylic C(sp3)-H derivatives, and cycloalkanes). This method provides straightforward access to valuable alkylarenes with high chemo- and site-selectivity under extremely mild reaction conditions, and offers an appealing strategy for constructing complex organic molecules using low-cost starting materials and environmentally benign iron salts.
Results and discussion
Initial experiments
With the aim of investigating iron-promoted photochemical cross-coupling between low reactive C(sp2)-H and C(sp3)-H bonds, we selected anisole (1a) and 4-ethylbiphenyl (2a) as model substrates and utilized air as an environmentally friendly oxidizing agent. Various metal salts, including CoCl2, NiCl2, CuCl2, Fe2(SO4)3, Fe(NO3)3, FeCl3 or FeBr3, were tested as initiators in catalytic amounts. The results indicated that only iron halides displayed activity in this transformation (Fig. 2, entries 1–9). Specifically, when 1a and 2a were reacted in 1,1,2,2-tetrachloroethane (TCE) with 20 mol% FeCl3 · 6H2O under an air atmosphere and irradiation with a 50 W LED lamp (λmax = 410 nm), the alkylbenzene product (3) was obtained in a good yield of 76% (entry 9). Solvent screening experiments were performed, and it was found that the yields were found to decrease when using other solvents such as CH3OH, CH3CN, C6F6, dichloroethane (DCE), or dichloromethane (DCM) (entries 10–14). Different light sources, such as a 50 W LED lamp with maximum wavelength at 395 or 455 nm, provided yields of 56% and 24%, respectively (entries 15, 16). Moreover, the reaction did not proceed in the dark at either 25 °C or 70 °C (entries 17, 18), highlighting the critical role of light irradiation with a suitable wavelength for the transformation to occur. External additives, including an amine base, a carboxylic acid, a chloride source and oxygen were also examined, but none of them enhanced the yield (entries 19–22).
Substrate scope
Under optimal conditions, we conducted an assessment of the substrate scope of C(sp2)-H precursors in the iron halide-enabled photochemical reaction (Fig. 3). Our study included a range of phenyl ethers (products 3–6), substituted phenyl ethers (7–11), 2,3-dihydrobenzofuran (12), benzo[d][1,3]dioxole (13), 2,3-dihydrobenzo[b][1,4]dioxine (14), phenyl sulfides (15–17), phenol and its derivatives (18–25), all of which were found to be compatible. The corresponding products were obtained with yields ranging from 43% to 76%, typically with only a single regioisomer observed. This process demonstrated high regioselectivity towards competitive C(sp2)-H sites. For example, during the formation of compound 25, the 4- and 5-position of Guaiacol were selectively benzylated in a satisfactory ratio of 6.0:1. Additionally, product 26, bearing three reactive sites in the substrate, was formed in a 66% yield and displayed exclusive regioselectivity. It is worth noting that benzene was successfully converted into the desired product (27) in a 45% yield. Alkyl benzenes containing competitive benzyl C-H bonds acted as C(sp2)-H precursors instead of C(sp3)-H donors in this reaction. The reaction of toluene or tert-butyl benzene with 1-bromo-4-ethylbenzene gave the desired products (28, 29) with para:ortho ratios of 3.0:1 and 4.0:1, respectively, while those of biphenyls yielded the corresponding products (30–32) as single regioisomers in 45–53% yield.
Aromatic N-heterocycles are widely present in bioactive molecules and natural products, with their benzylated derivatives attracting significant attention due to the potential therapeutic applications40. Under standard conditions, reactions of 1H-indole, 7-bromo-1H-indoles or 5-bromo-1-methyl-1H-indole resulted in the formation of 3-benzylated indoles (33–36) with yields ranging from 49% to 61%. N-acyl protected indoles, such as 1-(1H-indol-1-yl)ethanone (product 37) and its derivatives (38–42), were found to give typically higher reaction yields (64–73%). The reaction of an N-tosyl protected pyrrole selectively occurred at 2-position, furnishing the product (43) in a 45% yield. These findings indicate a high tolerance of this method towards indole- and pyrrole-based heterocycles.
In terms of C(sp3)-H precursors, we first explored various electronically and sterically diverse ethylbenzene derivatives (Fig. 4). These reactions, under standard conditions, produced coupling products (44–57) with yields of 55–74%. Additionally, alkyl benzenes with a long side chain (58, 59), fused aliphatic rings (60–62), fused aromatic rings (63), as well as tertiary or primary benzylic C-H bonds (64–67), were found to be compatible, delivering products with yields of 49–65%. To demonstrate the precise C-H recognition of this method, several substrates containing competitive primary, secondary, and tertiary benzylic C-H bonds were tested. For instance, 1-(p-tolyl)adamantane, a compound with both benzyl and adamantanyl C-H bonds, was selectively arylated at the adamantanyl C-H site of higher bond strength, affording the corresponding product (68) in a 52% yield and with 10:1 r.r.. The Hirshfeld charge analysis revealed that the carbocation on the alkyl group had more positive charges, which could be advantageous for further alkylation steps (see more details in Supplementary Information Section 6.2). The reaction with 1-ethyl-4-methylbenzene exhibited a site-selectivity of 4.8:1 r.r. (product 69), whereas 1-ethyl-4-(4-isopropylphenoxy)benzene or 1-cyclohexyl-4-ethylbenzene provided with 3.0:1 and 10:1 r.r. (products 70, 71), respectively. In these instances, the C(sp3)-H arylation was observed to predominantly take place at secondary C-H bonds, rather than primary or tertiary ones. This selectivity can be attributed to a delicate balance between steric hindrance and electronic preferences41, as well as the influence of iron salts in other steps of the process.
Allylic C-H donors were identified as suitable substrates and could be selectively coupled with benzenes. For example, (2-methylprop-1-en-1-yl)benzene, which bears two closely related allylic C-H bonds, exhibited a preference for undergoing C-H arylation of the (Z)- over (E)-methyl group. This resulted in the formation of the product (74) with a yield of 58% and > 20:1 r.r.. Despite having higher bond dissociation energies of C-H bonds compared to toluene derivatives and allylic C-H precursors, various cycloalkanes and their substituted derivatives were shown to be applicable in the reaction. Adamantane, 1-methyl adamantine, cyclopentane, cyclohexane, cycloheptane and 1,1-dimethyl cyclohexane, were successfully converted into the coupling product (75–80) in 40–49% yield under slightly modified conditions. Notably, adamantane and its derivatives have stronger tertiary C-H bonds than secondary C-H bonds (BDE of ~99 kcal/mol vs ~96 kcal/mol), but their reactions exhibited exclusive selectivity towards tertiary C-H bonds, yielding products 75 and 76.
Mechanistic studies
To investigate the reaction mechanism, several control experiments were designed and conducted (Fig. 5). The addition of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) or 2,6-di-tert-butyl-4-methylphenol (BHT) to the photochemical reaction of 1d and 2a resulted in complete inhibition the formation of product 6 (Fig. 5a, left). Instead, HRMS analysis detected a TEMPO- and a BHT-benzyl radical coupling product (81, 82). When the reaction was carried out in darkness in the presence of TEMPO, compound 81 was not observed. These findings strongly support the hypothesis of a pathway that proceeds through C-centered radicals. The participation of chlorine radicals was confirmed by the reaction of N-tosyl diallylamine (83) and stoichiometric FeCl3 · 6H2O under standard conditions, which gave a cyclization product (84) with a yield of 61% (Fig. 5a, right)42. Moreover, the reaction of 1d and 4-(cyclopro-pylmethyl)−1,1′-biphenyl (85) under standard conditions yielded a ring-opened alkyl chloride (86) with a yield of 66%. The reaction between 1d and cyclopropylbenzene (87) under standard conditions with the addition of nucleophilic sodium acetate also afforded a ring-opening product (88) in a 77% yield (For an in-depth understanding of the formation mechanism of product 88, please refer to page S79 of the Supplementary Information). These results suggest that the free radical chain reaction occurs between the chlorine radical and aryl cyclopropane, and the cation is subsequently captured by the nucleophilic reagent, further demonstrating the involvement of chlorine radicals in the photochemical coupling reaction (Fig. 5a, right)43,44.
The reaction of 1d + 2a → 6 exhibited a light-dark interval response, indicating the essential need for continuous light irradiation was essential for the transformation to occur (Fig. 5b). X-ray photoelectron spectroscopy (XPS) analysis was performed on the residue obtained from the reaction of 1d and 2a, in the presence of 2.0 equivalent of FeCl3 · 6H2O under argon. An evident signal at 709.8 eV, corresponding to Fe2+ species, was detected. In contrast, the residue obtained from the reaction under standard conditions showed a significant signal at 711.0 eV, assigned to Fe3+ species. These observations imply a possible pathway involving Fe(III)→Fe(II)→Fe(III) and air oxidation, as depicted in Fig. 5c45. UV-Vis absorption spectra of the individual components and their various combinations revealed that the substrates (1d, 2a), the product (6), and different mixtures ([1d + 1a], [1d + 1a + 6]) displayed absorption only at λ < 330 nm. Meanwhile, the iron salt exhibited evident absorption at λ > 400 nm. These results suggest that the species responsive to visible light could be derived from iron species present within the system (Fig. 5d and Supplementary Fig. 3).
Incorporating nucleophilic sodium acetate or sodium thiocyanate into this photochemical reaction resulted in 1-([1,1’-biphenyl]−4-yl)ethyl acetate (89) or 4-(1-thiocyanatoethyl)−1,1’-biphenyl (90) in yields of 47% and 69%, respectively, indicating a potential pathway via carbon cations (Fig. 5e). Irradiating 4-ethyl-1,1’-biphenyl (2a) with 2.0 equivalent of FeCl3 ∙ 6H2O under argon yielded a chlorinated product (91) in a yield of 44% and a self-coupling product (92) in a yield of 49%. It is worth mentioning that these products did not form in the dark. In the presence of 1d, a C(sp2)-H precursor, (1-chloroethyl)benzene or its bromide analog could be easily converted to the cross-coupling product (44) in a good yield (Fig. 5f). These findings suggest that the reaction can proceed through C-H chlorinated intermediates, but light irradiation is essential for their generation. Furthermore, kinetic isotope effect (KIE) experiments estimated the KH/KD ratio of the reaction 1d + 2b → 44 as 2.62, confirming that the hydrogen atom abstraction is the rate-determining step (Fig. 5g).
Based on these mechanistic experiments and reported literatures34,36,46, we proposed a plausible mechanism (Fig. 5h). Initially, visible light induces a ligand-to-metal charge transfer (LMCT) of the iron salt (FeCl3·6H2O or FeBr3), generating FeCl2 and a chlorine radical. This active radical abstracts a hydrogen atom from an aliphatic C-H bond, affording HCl and a C-centered radical. Aerobic oxidation of the iron(II) species regenerates the iron(III) salt, which can further oxidize the C-centered radical to a carbon cation47,48,49. Subsequently, the C(sp2)-C(sp3) cross-coupling coupling of the alkyl carbon cation, or a corresponding chloride derivative from nucleophile attack, with arenes leads to product formation. The final step can be viewed as a Friedel-Crafts-type process promoted by an iron-based Lewis acid.
Synthetic applications
With a more comprehensive understanding of the reaction mechanism, we conducted an evaluation of the synthetic utility of this method (Fig. 6). Our investigation revealed that a diverse array of derivatives from natural products and medicinal relevance were compatible with this protocol. For instance, 2-(phenoxymethyl)tetrahydrofuran (product 93), 1-(phenoxymethyl)adamantane (94), sesamol (95), a L-menthol derivative (96), a (+)-fenchol derivative (97), a L(-)-borneol derivative (98) and a derivative of epiandrosterone (99) all effectively react with 2a to yield coupling products (93‒99) as single regioisomers in yields ranging from 35% to 73%. Additionally, methoxybenzene (1a) smoothly react with a derivatized difluoro-benzodioxole, a canagliflozin derivative, or triclosan under standard conditions, leading to the formation of products (100‒102) in yields of 40‒70%. These results further illustrate the high functionality compatibility and selectivity of the reaction.
Finally, several bioactive molecules were prepared on the basis of the photochemical cross-coupling reaction. For instance, Nafenopin is a potent hypolipidemic drug ($ 435.5/100 mg, Alichem Inc.)50, and its ester derivative (105) can be easily synthesized in just two steps. The reaction of phenol ($ 121/2.0 kg, Alfa Aesar) and 1,2,3,4-tetrahydronaphthalene ($ 41.9/1.0 kg, Alfa Aesar) was conducted under standard conditions, furnishing 4-(1,2,3,4-tetrahydronaphthalen-1-yl)phenol (103) in a 69% yield. Compound 103 was then treated with ethyl 2-bromo-2-methylpropanoate (104, $ 69.6/250 g, Alfa Aesar) for 24 h in the presence of K2CO3, and gave the nafenopin ester (105) in a 98% yield. This cost-efficient two-step procedure can also be utilized to synthesize a beclorbrate derivative (107). When cyclohexane was subjected to the same conditions and reacted with 4-methoxyindole, it resulted in the arylated product (108) in a 38% yield. This compound could be subsequently converted into the derivative of an anti-hepatitis drug (110) in an 82% yield. Notably, the reaction of 4-methoxyindole (5.5 mmol) with cyclohexane can be easily scaled up, providing a comparable isolated yield (0.44 g, 34% yield).
We have developed a simplified strategy that utilizes multiple functionalities of iron(III) halides under visible light conditions for the direct and selective coupling of low-reactive C(sp2)-H and C(sp3)-H bonds. In the absence of any ligand and with air serving as the green oxidant, a catalytic amount of FeCl3 or FeBr3 facilitates the reaction of a wide variety of C(sp2)-H precursors including benzenes, phenols, phenol ethers, phenyl sulfides, indoles and pyrroles with C(sp3)-H donors such as benzylic, allylic derivatives and cycloalkanes. This protocol produces various C(sp2)-C(sp3) coupling products in good yields and with high chemo- and site-selectivity. Mechanistic studies reveal that the iron salt is not only involved in the light-triggered initiation of C-centered radicals but also in the induction of single-electron oxidation under aerobic conditions, and participates in the subsequent carbocation-mediated alkylation of arenes. The step-by-step release of radical species and carbocation intermediates appears to be the key to success in achieving desirable reactivity and selectivity. Overall, this study provides a promising approach to the selective activation of strong C-H bonds, enabling the construction of valuable C(sp2)-C(sp3) bonds from abundant reserves of hydrocarbon feedstocks, and will contribute to the development of efficient and sustainable synthetic methods in organic chemistry.
Methods
General procedure for the photochemical cross-coupling of arenes with benzylic or allylic C(sp3)-H precursors
A Schlenk tube (10 mL) was charged with arenes (1a‒1zn, 0.30 mmol) and benzylic or allylic C-H precursors (2a‒2x, 2z‒2zd, 0.90 mmol), FeCl3·6H2O (0.060 mmol) or FeBr3 (0.11 mmol), (CHCl2)2 (or (CH2Cl)2, CHCl3, CHCl2, 0.75 mL). The mixture was degassed via three freeze-pump-thaw cycles, then filled with dry air. The Schlenk tube was positioned approximately 5 cm away from a 50 W LED lamp (λmax = 410 nm). After being stirred at 25 °C for 48 h, the reaction mixture was concentrated to dryness. Purification using silica gel column chromatography gave the pure products.
General procedure for the photochemical cross-coupling of arenes with cycloalkanes
A Schlenk tube (10 mL) was charged with arenes (1d, 1ze or 1zv, 0.30 mmol) and cycloalkanes (2 y, 2ze‒2zj, 3.0 mmol or 0.75 mL), FeBr3 (0.11 mmol) and (CH2Cl)2 (0.75 mL) or free-solvent. The mixture was degassed via three freeze-pump-thaw cycles, then filled with dry air. The Schlenk tube was positioned approximately 5 cm away from a 40 W LED lamp (λmax = 370 nm). After being stirred at 80 °C for 60 h or at 25 °C for 120 h, the reaction mixture was concentrated to dryness. Purification using silica gel column chromatography gave the pure products.
General procedure for the late-stage modification of nature product derivatives and drug-like molecules
A Schlenk tube (10 mL) was charged with arenes (1a, 1zo‒1zu, 0.30 mmol), benzylic C-H precursors (2a, 2zk‒2zm, 0.90 mmol), FeCl3·6H2O (0.060 mmol), ((CHCl2)2 or (CH2Cl)2, 0.75 mL). The mixture was degassed via three freeze-pump-thaw cycles, then filled with dry air. The Schlenk tube was positioned approximately 5 cm away from a 50 W LED lamp (λmax = 410 nm) or a 40 W LED lamp (λmax = 370 nm). After being stirred at 25 °C for 48 h, the reaction mixture was concentrated to dryness. Purification using silica gel column chromatography gave the pure products.
Data availability
The authors declare that the data supporting the findings of this study are available within this article and its Supplementary Information file, or from the corresponding authors upon request. The experimental procedures and characterization of all new compounds are provided in Supplementary Information, and coordinates of the optimized structures are provided as source data. The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Center (CCDC), under deposition numbers CCDC 2251704 (35), CCDC 2251707 (38), and CCDC 2098093 (56). These data can be obtained free of charge from The Cambridge Crystallographic Data Center via www.ccdc.cam.ac.uk/data_request/cif. Source data are provided with this paper.
References
Labinger, J. A. & Bercaw, J. E. Understanding and exploiting C-H bond activation. Nature 417, 507–514 (2002).
Davies, H. M. L. & Liao, K. Dirhodium tetracarboxylates as catalysts for selective intermolecular C-H functionalization. Nat. Rev. Chem. 3, 347–360 (2019).
Yeung, C. S. & Dong, V. M. Catalytic dehydrogenative cross-coupling: forming carbon-carbon bonds by oxidizing two carbon-hydrogen bonds. Chem. Rev. 111, 1215–1292 (2011).
Yang, Y., Lan, J. & You, J. Oxidative C-H/C-H coupling reactions between two (hetero)arenes. Chem. Rev. 117, 8787–8863 (2017).
Capaldo, L., Ravelli, D. & Fagnoni, M. Direct photocatalyzed hydrogen atom transfer (HAT) for aliphatic C-H bonds elaboration. Chem. Rev. 122, 1875–1924 (2022).
Xue, X.-S., Ji, P., Zhou, B. & Cheng, J.-P. The essential role of bond energetics in C-H activation/functionalization. Chem. Rev. 117, 8622–8648 (2017).
Barckholtz, C., Barckholtz, T. A. & Hadad, C. M. C-H and N-H bond dissociation energies of small aromatic hydrocarbons. J. Am. Chem. Soc. 121, 491–500 (1999).
Liu, W. et al. Catalyst-controlled selective functionalization of unactivated C-H bonds in the presence of electronically activated C-H bonds. J. Am. Chem. Soc. 140, 12247–12255 (2018).
Ravelli, D. et al. Site-selective C-H functionalization by decatungstate anion photocatalysis: synergistic control by polar and steric effects expands the reaction scope. ACS Catal. 8, 701–713 (2018).
Meng, G. et al. Achieving site-selectivity for C-H activation processes based on distance and geometry: a carpenter’s approach. J. Am. Chem. Soc. 142, 10571–10591 (2020).
Pabst, T. P. & Chirik, P. J. Development of cobalt catalysts for the meta-selective C(sp2)-H borylation of fluorinated arenes. J. Am. Chem. Soc. 144, 6465–6474 (2022).
Fagin, A. A. Reactions of neodymium(II) iodide with organohalides. Polyhedron 25, 1105–1110 (2006).
Roberts, R. M. & Brandenberger, S. G. Disproportionation of alkylbenzenes. II. Rearrangement of the n-propyl group in treatment of n-propyl-β-C14-benzene with aluminum chloride. J. Am. Chem. Soc. 79, 5484–5488 (1957).
Cao, X. et al. Engineering lattice disorder on a photocatalyst: photochromic BiOBr nanosheets enhance activation of aromatic C-H bonds via water oxidation. J. Am. Chem. Soc. 144, 3386–3397 (2022).
Li, Y. et al. Rationally designed metal cocatalyst for selective photosynthesis of bibenzyls via dehalogenative C-C homocoupling. ACS Catal. 11, 4338–4348 (2021).
Antonchick, A. P. & Burgmann, L. Direct selective oxidative cross-coupling of simple alkanes with heteroarenes. Angew. Chem. Int. Ed. 52, 3267–3271 (2013).
Li, G.-X., Hu, X., He, G. & Chen, G. Photoredox-mediated Minisci-type alkylation of N-heteroarenes with alkanes with high methylene selectivity. ACS Catal. 8, 11847–11853 (2018).
Deng, G. et al. Coupling of nitrogen heteroaromatics and alkanes without transition metals: a new oxidative cross-coupling at C-H/C-H bonds. Chem. Eur. J. 15, 333–337 (2009).
Quattrini, M. C. et al. Versatile cross-dehydrogenative coupling of heteroaromatics and hydrogen donors via decatungstate photocatalysis. Chem. Commun. 53, 2335–2338 (2017).
Zhuang, Z., Herron, A., Liu, S. & Yu, J.-Q. Rapid construction of tetralin, chromane, and indane motifs via cyclative C-H/C-H coupling: four-step total synthesis of (±)-Russujaponol F. J. Am. Chem. Soc. 143, 687–692 (2021).
Huang, C. et al. Quantum dots enable direct alkylation and arylation of allylic C(sp3)-H bonds with hydrogen evolution by solar energy. Chem 7, 1–14 (2021).
Huang, C.-Y., Li, J. & Li, C.-J. A cross-dehydrogenative C(sp3)-H heteroarylation via photo-induced catalytic chlorine radical generation. Nat. Commun. 12, 4010 (2021).
Alotaibi, A., Bayahia, H., Kozhevnikova, E. F. & Kozhevnikov, I. V. Kinetic modeling and optimization of the operating conditions of benzene alkylation with ethane on PtH‑ZSM‑5 catalyst. ACS Catal. 5, 5512–5518 (2015).
Cheng, F. & Brewer, C. E. Producing jet fuel from biomass lignin: potential pathways to alkyl-benzenes and cycloalkanes. Renew. Sust. Energ. Rev. 72, 673–722 (2017).
Dinh, L. V. et al. Alkyl-aryl coupling catalyzed by tandem systems of pincer-ligated iridium complexes and zeolites. ACS Catal. 6, 2836–2841 (2016).
Takabatake, M. et al. Dehydrogenative coupling of alkanes and benzene enhanced by slurry-phase interparticle hydrogen transfer. JACS Au 1, 124–129 (2021).
Takabatake, M., Nambo, M., Manaka, Y. & Motokura, K. Direct alkylation of benzene at lower temperatures in the liquid phase: catalysis by montmorillonites as noble-metal-free solid acids. ChemPlusChem 85, 450–453 (2020).
Xie, W., Heo, J., Kim, D. & Chang, S. Copper-catalyzed direct C-H alkylation of polyfluoroarenes by using hydrocarbons as an alkylating source. J. Am. Chem. Soc. 142, 7487–7496 (2020).
Rana, S. et al. Organic synthesis with the most abundant transition metal-iron: from rust to multitasking catalysts. Chem. Soc. Rev. 50, 243–472 (2021).
Cera, G. & Ackermann, L. Iron-catalyzed C-H functionalization processes. Top. Curr. Chem. 374, 57 (2016).
Sun, C.-L., Li, B.-J. & Shi, Z.-J. Direct C-H transformation via iron catalysis. Chem. Rev. 111, 1293–1314 (2011).
Bauer, I. & Knölker, H.-J. Iron catalysis in organic synthesis. Chem. Rev. 115, 3170–3387 (2015).
Wei, D. & Darcel, C. Iron catalysis in reduction and hydrometalation reactions. Chem. Rev. 119, 2550–2610 (2019).
Kang, Y. C., Treacy, S. M. & Rovis, T. Iron-catalyzed photoinduced LMCT: a 1 °C-H abstraction enables skeletal rearrangements and C(sp3)-H alkylation. ACS Catal. 11, 7442–7449 (2021).
Sarkar, T., Bhattacharyya, A., Banerjee, S. & Hussain, A. LMCT transition-based red-light photochemotherapy using a tumour-selective ferrocenyl iron(III) coumarin conjugate. Chem. Commun. 56, 7981–7984 (2020).
Jin, Y. et al. Convenient C(sp3)-H bond functionalisation of light alkanes and other compounds by iron photocatalysis. Green. Chem. 23, 6984–6989 (2021).
Ye, Z. et al. Photochemical diversification of strong C(sp3)-H bonds enabled by allyl bromide and sodium fluoride. Nat. Synth. 2, 766–777 (2023).
Li, Y., Lei, M. & Gong, L. Photocatalytic regio- and stereoselective C(sp3)-H functionalization of benzylic and allylic hydrocarbons as well as unactivated alkanes. Nat. Catal. 2, 1016–1026 (2019).
Cao, S., Hong, W., Ye, Z. & Gong, L. Photocatalytic three-component asymmetric sulfonylation via direct C(sp3)-H functionalization. Nat. Commun. 12, 2377 (2021).
Wang, Q.-L. et al. Aerobic cross-dehydrogenative couplings of N-heteroarenes with toluene derivatives at room temperature. Green. Chem. 23, 7790–7795 (2021).
Liao, K. et al. Site-selective and stereoselective functionalization of unactivated C-H bonds. Nature 533, 230–234 (2016).
Fu, N., Sauer, G. & Lin, S. Electrocatalytic radical dichlorination of alkenes with nucleophilic chlorine sources. J. Am. Chem. Soc. 139, 15548–15553 (2017).
Halgren, T. A. et al. Kinetics and equilibrium constants for reactions of α-phenyl-substituted cyclopropylcarbinyl radicals. J. Am. Chem. Soc. 122, 2988–2994 (2000).
Gieuw, M. H. et al. Boron tribromide as a reagent for anti-Markovnikov addition of HBr to cyclopropanes. Chem. Sci. 11, 9426–9433 (2020).
Xu, S. et al. Ti3C2 MXene promoted Fe3+/H2O2 Fenton oxidation: comparison of mechanisms under dark and visible light conditions. J. Hazard. Mater. 444, 130450 (2023).
Tu, J.-L., Hu, A.-M., Guo, L. & Xia, W. Iron-catalyzed C(sp3)-H borylation, thiolation, and sulfinylation enabled by photoinduced ligand-to-metal charge transfer. J. Am. Chem. Soc. 145, 7600–7611 (2023).
Leclercq, B. et al. Synthesis, structure and magnetic behavior of iron arsenites with hierarchical magnetic units. Inorg. Chem. Front 7, 3987–3999 (2020).
Wayner, D. D. M., McPhee, D. J. & Griller, D. Oxidation and reduction potentials of transient free radicals. J. Am. Chem. Soc. 110, 132–137 (1988).
Webb, E. W. et al. Nucleophilic (radio)fluorination of redox-active esters via radical-polar crossover enabled by photoredox catalysis. J. Am. Chem. Soc. 142, 9493–9500 (2020).
Bayly, A. C., Roberts, R. A. & Dive, C. Suppression of liver cell apoptosis in vitro by the non-genotoxic hepatocarcinogen and peroxisome proliferator nafenopin. J. Cell Biol. 125, 197–203 (1994).
Acknowledgements
We gratefully acknowledge funding from the National Natural Science Foundation of China (grant no. 22371237, 22071209, 22071206), the National Youth Talent Support Program, and the Natural Science Foundation of Fujian Province of China (grant no. 2017J06006).
Author information
Authors and Affiliations
Contributions
L.G. conceived and designed the project, Q.-Y.L., S.C. and T.H. conducted the experiments, Q.-Y.L., F.Y. and L.G. analyzed and interpreted the experimental data, Z.Y. designed and performed the DFT calculations. L.G. and Y.-M.L. prepared the manuscript, Q.-Y.L. and S.C. prepared the Supplementary Information.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, QY., Cheng, S., Ye, Z. et al. Visible light-triggered selective C(sp2)-H/C(sp3)-H coupling of benzenes with aliphatic hydrocarbons. Nat Commun 14, 6366 (2023). https://doi.org/10.1038/s41467-023-42191-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-42191-9
- Springer Nature Limited