Skip to main content
SpringerLink
Log in

High-power laser diodes based on InGaAsP alloys

  • Letter
  • Published:

From Nature

View current issue Submit your manuscript

Abstract

HIGH-POWER, high-coherence solid-state lasers, based on dielectric materials such as ruby or Nd:YAG (yttrium aluminium garnet), have many civilian and military applications. The active media in these lasers are insulating, and must therefore be excited (or ‘pumped’) by optical, rather than electrical, means. Conventional gas-discharge lamps can be used as the pumping source, but semiconductor diode lasers are more efficient, as their wavelength can be tailored to match the absorption properties of the lasing material. Semiconducting AlGaAs alloys are widely used for this purpose1, 2, but oxidation of the aluminium and the spreading of defects during device operation limit the lifetime of the diodes3, and hence the reliability of the system as a whole. Aluminium-free InGaAsP compounds, on the other hand, do not have these lifetime-limiting properties4–8. We report here the fabrication of high-power lasers based on InGaAsP (lattice-matched to GaAs substrates), which operate over the same wavelength range as conventional AlGaAs laser diodes and show significantly improved reliability. The other optical and electrical properties of these diodes are either comparable or superior to those of the AlGaAs system.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Endriz, J. G., IEEE J. Quantum Electron. 28, 952–965 (1992).

    Article  ADS  CAS  Google Scholar 

  2. Welsh, D. F., Chan, B., Streifer, W. & Scifres, D. R. Electron. Lett. 24, 113–115 (1988).

    Article  ADS  Google Scholar 

  3. Fukuda, M. Reliability and Degradation of Semiconductor Lasers and LEDs (Artech House, Boston, 1991).

    Google Scholar 

  4. Garbuzov, D. Z., et al. IEEE J. Quantum Electron. 27, 1531–1535 (1991).

    Article  ADS  CAS  Google Scholar 

  5. Razeghi, M. InGaAsP Diodes, U.S. Air Force Phillips laboratory, Diode laser technology program conference, Albuquerque, April 20–22 (1993).

  6. Fukuda, M. J. appl. Phys. 59, 4172–4176 (1986).

    Article  ADS  CAS  Google Scholar 

  7. Chand, N. Appl. Phys. Lett. 62, 1818–1820 (1993).

    Article  ADS  CAS  Google Scholar 

  8. Diaz, J., et al. Electron. Lett. (Submitted).

  9. Razeghi, M. The MOCVD Challenge (Hilger, Bristol, 1989).

    Google Scholar 

  10. Razeghi, M. in Materials for Photonic Devices (eds Andrea, A. D., Lapiccirella, A., Marietta, G. & Viticoli, S.) 15 (World Scientific, River Edge, New Jersey, 1991).

    Google Scholar 

  11. Dyment, J. C., et al. Appl. Phys. Lett. 24, 481–484 (1974).

    Article  ADS  CAS  Google Scholar 

  12. Laser Diode Product Catalog (Spectra Diode Labs, SanJose, California, 1994).

  13. Larsson, A., Salzman, J., Mittelstein, M. & Yariv, A. J. appl. Phys. 60, 66–68 (1986).

    Article  ADS  CAS  Google Scholar 

  14. Sakamoto, M. & Kato, Y. Appl. Phys. Lett. 50, 869–870 (1987).

    Article  ADS  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Center for Quantum Devices, Department of Electrical Engineering and Computer Science, Northwestern University, Evanston, Illinois, 60208, USA

    Manijeh Razeghi

Authors
  1. Manijeh Razeghi
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Razeghi, M. High-power laser diodes based on InGaAsP alloys. Nature 369, 631–633 (1994). https://doi.org/10.1038/369631a0

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/369631a0

  • Springer Nature Limited

This article is cited by

Search

Navigation