Abstract
Porous hydroxyapatite (HAp) ceramics were fabricated using poly vinyl butyral (PVB) as a porosifier. The effects of preparation conditions involving PVB particle size, sintering time, and forming pressure (die-pressing technique) on the resultant pore size/structure as well as the pore size distribution were investigated. The experimental results showed that the HAp ceramics with controlled pore characteristics such as pore volume fraction, pore size and pore structure are achievable. It provides the possibility to design HAp ceramics with diverse porosities simulating that of natural bone.
Similar content being viewed by others
References
K. DE GROOT, Biomaterials 1 (1980) 47.
V. JASTY, M. JARCHO, K. L. GUMAER, R. SANERSCHELT and H. P. DROBECK, 9th International Congress Electron Microscopy 2 (1978) 674.
M. FABBRI, G. C. CELOTTI and A. RAVAGLIOLI, Biomaterials 16 (1995) 225.
I. H. ARITA, D. S. WILKINSON, M. A. MONDRAGON and V. M. CASTANO, ibid. 16 (1995) 403.
K. IOKU, S. SOMIYA and M. YOSHIMURA, J. Mater. Sci. Lett. 8 (1989) 1203.
H. OHASHI, M. THERIN, A. MEUNIER and P. CHRISTEL, J. Mater. Sci. Mater. Med. 5 (1994) 237.
B. A. RAHN, J. NEFF, A. LEUTENEGGER, R. MATHYS and S. M. PERREN, in ‘‘Biological and biomechanical performance of biomaterials’’, edited by P. Christel, A. Meunier and A. J. C. Lee (Elsevier Science Publishers, Amsterdam, 1986) pp. 21–26.
W. CHEN, X. ZHANG, J. WANG and X. ZHAO, in ‘‘Biomedical Materials Research in the Far East’’, edited by X. Zhao and Y. Ikada (Kobunshi Kankokai, Tokyo, 1993) pp. 157–158.
G. DALCUSI and N. PASSUTI, J. Biomed. Mater. Res. 11 (1990) 86.
S. F. HULBERT, S. J. MORRISON and J. J. KLAWITTER, J. Biomed. Mater. Res. Symp. 2 (1970) 269.
I. H. ARITA, V. M. CASTANO and D. S. WILKINSON, J. Mater. Sci. Mater. Med. 6 (1995) 19.
J. ZHOU, X. ZHANG, J. CHEN, S. ZENG and K. DE GROOT, ibid. 4 (1993) 83.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
LIU , DM. Fabrication of hydroxyapatite ceramic with controlled porosity. Journal of Materials Science: Materials in Medicine 8, 227–232 (1997). https://doi.org/10.1023/A:1018591724140
Issue Date:
DOI: https://doi.org/10.1023/A:1018591724140