Abstract
The method based on the power shovel monitoring is described for determining the depth of cut and the value of power consumption depending on the rock strength and the dipper position in digging operation. The investigations into mining shovels operating at different open-pit mines of Turkish Coal Enterprises were carried out.
Similar content being viewed by others
REFERENCES
S. Williamson, C. Mc Kenzie, and H. O'Longhlin, “Electrical shovel performance as a measure of blasting efficiency,” in: Proceedings of the First Int. Symp. on Rock Fragmentation by Blasting, Lulea, Sweden (1983).
C. Hendricks, J. Davidson, and M. J. Scoble, “Performance monitoring of electrical mining shovels,” in: Int. Symp. on Mine Planning and Equipment Selection, Calgary, Canada (1988).
C. Hendricks, M. J. Scoble, and J. Peck, “Performance monitoring of electric mining shovels,” Trans. Inst. Min. Metal (Section A: Min Industry), 98 (1989).
A. G. Pasamehmetoglu, et al., The Evaluation of Geotechnical and Performance Data, Suggestion of a Classification System [in Turkish], Final Report, Middle East Technical University, Ankara (1988).
A. Ceylanoglu, “Performance monitoring of electrical power shovels for diggability assessment in surface coal mines,” Ph. D. Thesis, in Mining Engineering, Middle East Technical University, Ankara (1991).
C. Karpuz, A. Ceylanoglu, and A. G. Pasamehmetoglu, “An investigation on the influence of depth of cut and blasting on shovel digging performance,” Int. J. of Surface Mining and Reclamation, 6 (1992).
A. G. Pasamehmetoglu, C. Karpuz, and V. Müftüoglu, “Assessment of blasting efficiency by seismic surveys and rope shovel performance monitoring. A case study,” Int. J. of Surface Mining and Reclamation, 5 (1991).
A. G. Pasamehmetoglu, C. Karpuz, and Y. V. Müftüoglu “Performance assessment of hydraulic and cable shovels,” Int. J. of Surface Mining and Reclamation, 6 (1992).
G. N. Panagiotou, “Assessment of open pit excavators diggability,” Mine Planning and Equipment Selection, Singhal & Vavra, eds., Balkema (1990).
A. G. Pasamehmetoglu, C. Karpuz, T. Bozdag, M. A. Hindistan, and B. Açkgöz, Development of New Technologies to Improve Open Pit Equipment Performances [in Turkish], Final Report to TÜBITAK, Project No:MISAG-33(DPT), Middle East Technical University, Ankara (1995).
M. A. Hindistan, “Development of a computer based monitoring system and its usage for power shovels' monitoring,” Ph. D. Thesis in Mining Engineering, Middle East Technical University, Ankara (1997).
I. Evans, and C. D. Pomeroy, The Strength, Fracture, and Workability of Coal, Pergamon Press Ltd. London (1966).
F. F. Roxborough, “Cutting rock with picks,” The Mining Engineer (1973).
M. P. Evenden and J. J. Edwards, “Cutting theory and coal seam assessment techniques and their applilcation to shearer design,” Mining Science and Technology, 2 (1985).
I. H. Inyang, “Drag bit cutting: a conception of rock deformation process that corresponds observed forcedistance plots,” in: Int. Symp. on Mine Planning, and Equipment Selection, Calgary, Canada (1990).
Anon, Camile Bauer Catalog, Switzerland (1987).
Anon, “The description of rock masses for engineering purposes. Working party report,” Q. J. Engg. Geol., 10 (1977).
N. Barton, “Suggested methods for the quantitative description of discontinuities in rock masses,” ISRM Commission on Standardization of Laboratory and Field Tests, Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 15 (1978).
Rights and permissions
About this article
Cite this article
Karpuz, C., Hindistan, M.A. & Bozdag, T. A New Method for Determining the Depth of Cut Using Power Shovel Monitoring. Journal of Mining Science 37, 85–94 (2001). https://doi.org/10.1023/A:1016741020499
Issue Date:
DOI: https://doi.org/10.1023/A:1016741020499