Abstract
Most propulsion systems of vehicles travelling in the aquatic environment are equipped with propellers. Observations of nature, however, show that the absolute majority of organisms travel through water using wave motion, paddling or using water jet power. Inspired by these observations of nature, an innovative propulsion system working in aquatic environment was developed. This paper presents the design of the water propulsion system. Particular attention was paid to the use of paddling techniques and water jet power. A group of organisms that use those mechanisms to travel through water was selected and analysed. The results of research were used in the design of a propulsion system modelled simultaneously on two methods of movement in the aquatic environment. A method for modelling a propulsion system using a combination of the two solutions and the result were described. A conceptual design and a prototype constructed based on the solution were presented. With respect to the solution developed, studies and analyses of selected parameters of the prototype were described.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
MacIver M A, Fontaine E, Burdick J W. Designing future underwater vehicles: Principles and mechanisms of the weakly electric fish. IEEE Journal of Oceanic Engineering, 2004, 39, 651–659.
Willy A, Low K H. Development and initial experiment of modular undulating fin for untethered biorobotic AUVs. Proceedings of the IEEE International Conference on Robotics and Biomimetics, Hong Kong, China, 2005, 45–50.
Nguyen Q S, Park H C, Byun D. Thrust analysis of a fish robot actuated by piezoceramic composite actuators. Journal of Bionic Engineering, 2011, 8, 158–164.
Yan Q, Wang L, Liu B, Yang J, Zhang S. A novel implementation of a flexible robotic fin-actuated by shape memory alloy. Journal of Bionic Engineering, 2012, 9, 156–165.
Heo S, Wiguna T, Park A C, Goo N S. Effect of an artificial caudal fin on the performance of a biomimetic fish robot propelled by piezoelectric actuators. Journal of Bionic Engineering, 2007, 4, 151–158.
Yan Q, Han Z, Zhang S, Yang J. Parametric research of experiments on a carangiform robotic fish. Journal of Bionic Engineering, 2005, 5, 95–101.
Liu Y, Chen W, Liu J. Research on the swing of the body of two-joint robot fish. Journal of Bionic Engineering, 2008, 5, 159–165.
Sitorus P E, Nazaruddin Y Y, Leksono E, Budiyono A. Design and implementation of paired pectoral fins locomotion of labriform fish applied to a fish robot. Journal of Bionic Engineering, 2009, 6, 37–45.
Vo T Q, Kim H S, Lee B R. Propulsive velocity optimization of 3-joint fish robot using genetic-hill climbing algorithm. Journal of Bionic Engineering, 2009, 6, 415–429.
Wang T, Wen L, Liang J, Wu G. Fuzzy vorticity control of a biomimetic robotic fish using a flapping lunate tail. Journal of Bionic Engineering, 2010, 7, 56–65.
Liu J, Hu H. Biological inspiration: from carangiform fish to multi-joint robotic fish. Journal of Bionic Engineering, 2010, 7, 35–48.
Zhou H, Hu T, Xie H, Zhang D, Shen L. Computational hydrodynamics and statistical modeling on biologically inspired undulating robotic fins: a two-dimensional study. Journal of Bionic Engineering, 2010, 7, 66–76.
Yang S, Qiu J, Han X. Kinematics modeling and experiments of pectoral oscillation propulsion robotic fish. Journal of Bionic Engineering, 2009, 6, 174–179.
Cai Y, Bi S, Zheng L. Design and experiments of a robotic fish imitating cow-nosed ray. Journal of Bionic Engineering, 2010, 7, 120–126.
Zhou C, Low K. Better endurance and load capacity: an improved design of manta ray robot (RoMan-II). Journal of Bionic Engineering, 2010, Suppl., S137–S144.
Zhang Y, He J, Low K H. Parametric study of an underwater finned propulsor inspired by bluespotted ray. Journal of Bionic Engineering, 2012, 9, 166–176.
Shumway S E, Parsons G J. Scallops: Biology, Ecology and Aquaculture, Elsevier, Amsterdam, The Netherlands, 2006.
Denny M, Miller L. Jet propulsion in the cold: mechanics of swimming in the antarctic scallop adamussium colbeck. The Journal of Experimental Biology, 2006, 209, 4503–4514.
Kowal J, Sioma A. Active vision system for 3D product inspection. Control Engineering, 2009, 56, 46–48.
Tytko A, Sioma A. Evaluation of the operational parameters of ropes, in Kot A ed., Control Engineering in Materials Processing, Solid State Phenomena, Trans Tech Publications, Uetikon-Zuerich, Switzerland, 2011, 177, 125–134.
Bednarczyk J, Sioma A. Application of a visual measurement technique to the assessment of electrodynamic stamping, in Kot A ed., Control Engineering in Materials Processing, Solid State Phenomena, Trans Tech Publications, Uetikon-Zuerich, Switzerland, 2011, 177, 1–9.
Sioma A, Samek A. Bionics: Inspiration for Engineers, Monografy, AGH University of Science and Technology Press, Poland, 2007.
Samek A. Bionics: Natural Science for Engineers, Monografy, AGH University of Science and Technology Press, Poland, 2010.
Samek A. Bionics—a link connecting engineering and the nature. Proceedings of the 5th International Carpathian Control Conference (ICCC’ 2004), Zakopane, Poland, 2004.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sioma, A. Biologically-Inspired Water Propulsion System. J Bionic Eng 10, 274–281 (2013). https://doi.org/10.1016/S1672-6529(13)60223-1
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1672-6529(13)60223-1