Abstract
The site selection of CO2 geological storage facilities is essential for the development of safe and efficient carbon capture, utilization, and storage (CCUS) projects. Normally, CO2 geological storage site selection can be regarded as a complex multi-criteria decision-making (MCDM) problem. The aim of this paper is to present an integrated decision-making method for solving the site selection problem for CO2 geological storage. To achieve this goal, this method is based on multi-objective optimization by ratio analysis plus the full multiplicative form (MULTIMOORA) method and prioritized aggregation operators in Pythagorean fuzzy environment. The academic contributions of this study include: first, some Pythagorean fuzzy Schweizer–Sklar prioritized aggregation (PFSSPA) operators are proposed, which take into account the priority levels of criteria and the risk preferences of decision makers. The excellent properties of these operators are given. Then this study extends the classical MULTIMOORA method based on the developed aggregation operators (named PFSSPA-MULTIMOORA), and the calculation process of this method is described in detail. Subsequently, on the basis of the constructed criteria system, the PFSSPA-MULTIMOORA method is applied to rank the alternatives. Finally, we successfully utilized the PFSSPA-MULTIMOORA method to solve the site selection problem of CO2 geological storage in China. A comparative analysis of existing methods verifies the effectiveness and robustness of the proposed method. This work can provide advanced decision support for researchers and practitioners.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Global warming and greenhouse gas (carbon dioxide, methane, nitrous oxide, etc.) emissions have emerged as the primary issues preventing the sustainable growth of human society and economic systems. According to the World Energy Outlook 2021 report released by the International Energy Agency, global coal consumption will still grow strongly in 2021, leading to the second largest increase in carbon emissions on record. The apparent discrepancy between the current global government commitment target scenario and the 2050 net-zero emissions scenario suggests that the world will need to make more demanding emission reduction commitments and stronger measures if it is to reach net-zero emissions by mid-century. Carbon capture, utilization, and storage (CCUS) technologies refer to the capture, compression, transport, and storage of carbon dioxide (CO2) emitted from large sources or industrial applications. This technology is considered a feasible method to reduce greenhouse gas emissions and mitigate global warming [1,2,3].
CO2 storage technology is one of the most critical steps for CCUS. Carbon sequestration involves either the diffuse removal of CO2 from the atmosphere, after its release, by terrestrial or marine photosynthesis and subsequent long-term storage of the carbon-rich biomass, or the capture of CO2 emissions at source prior to potential release, and storage in deep oceans or geological media, or through surface mineral carbonation [4]. Among them, CO2 geological storage is the most well-developed storage method with the lowest operating cost and the earliest large-scale integrated commercial demonstration project. CO2 may leak from the geological storage reservoir and harm the environment and people due to a number of circumstances, including geological conditions, engineering methods, and force majeure at the storage site [5]. Therefore, to ensure the effective operation of the CCUS project, it is particularly important to select the appropriate storage location.
In the process of site selection, it is necessary to rank candidate sites and select the best location under multiple criteria, so it can be regarded as a multi-criteria decision-making (MCDM) problem. However, it is often difficult to express oneself with accurate values due to the inherent ambiguity and uncertainty of human perception in decision-making. Therefore, Zadeh [6] proposed the fuzzy set theory to describe the uncertainty and fuzziness of realistic decision-making. With the deepening of research and exploration of unknown areas, some more advanced fuzzy sets have emerged on the basis of fuzzy set, such as intuitionistic fuzzy sets [7] and hesitant fuzzy sets [8]. When making decisions in an intuitionistic fuzzy set environment, the sum of the membership degree and non-membership degree of expert judgment is required to be less than 1, which is often not the case. To break through this limitation, Yager extended intuitionistic fuzzy set again and put forward Pythagorean fuzzy sets (PFSs) [9]. Its essence is that the sum of membership and non-membership is greater than 1, but the sum of squares is less than 1. Compared with intuitionistic fuzzy set, the Pythagorean fuzzy set is more flexible, which can describe the uncertainty of the problem more delicately and comprehensively [10]. Thus, it is of great value to use the PFSs to handle the uncertainty and fuzziness of experts’ assessment information on site selection.
In recent years, a lot of MCDM technology has been employed for the determination of optimal locations for CO2 geological storage [5, 11,12,13,14]. Multi-objective optimization by ratio analysis plus the full multiplicative form (MULTIMOORA) [15] is a valid MCDM method that combines the ratio system, reference point, and full multiplicative form approaches. Dominance theory is employed to obtain a final ranking based on the results of these three subordinate methods. Subsequently, considering the fuzziness and uncertainty in many decision-making processes, extended forms of the MULTIMOORA method have appeared. For example, Wu et al. [16] developed a probabilistic linguistic MULTIMOORA method with the combined weights and the improve Borda theory to solve the MCDM problems with the linguistic evaluations. Liang et al. [17] proposed an extension robust method of MULTIMOORA to support the decision of MCDM with interval-valued Pythagorean fuzzy sets. Tian et al. [18] gave an extended picture fuzzy MULTIMOORA method based on the prospect theory to handle MCDM. Application areas for these extended forms include sustainable supplier selection [19], health-care delivery quality [20], sustainable community-based tourism [21], and green development level evaluation [22]. The application of the MULTIMOORA method is also often combined with other methods. For instance, Chen et al. [23] developed an extended MULTIMOORA method, which combines the entropy weight method to obtain the objective weights of customer requirements and introduces the influence weights to prioritize quality characteristics. Based on the third-generation prospect theory and the extended MULTIMOORA method, Qin and Ma [24] proposed an emergency decision-making method integrated with interval type-2 fuzzy information. Ma et al. [25] designed the PL-MULTIMOORA method, which combines the comprehensive BWM and entropy methods to handle the waste recycling app evaluation problems. The aforementioned studies demonstrated that the classical MULTIMOORA method and its extensions are reasonable approaches for solving real-life decision problems. Therefore, it is expected to apply the MULTIMOORA method to determine optimal locations for CO2 geological storage.
The information aggregation operators are an important part of MCDM method. Janani et al. [26] introduced an extension from Pythagorean fuzzy sets to complex Pythagorean fuzzy sets related to weighted aggregated functions involving Einstein operator. Paul et al. [27] developed a novel multi-attribute decision-making method using advanced Pythagorean fuzzy weighted geometric operator. However, most of the existing information aggregation method are based on simple algebraic operations. Therefore, the work of building new aggregation operators is significant and challenging. In addition, the importance of criteria varies in different MCDM problems; in other words, criteria can have priority relationships. For example, in the matter of CO2 geological storage site selection, the priority of ‘environmental risk’ should be higher than that of ‘investment cost’ and other criteria, i.e., ‘environmental risk’ has the highest priority because the environmental impact caused by CO2 leakage is extremely serious. Thus, it is necessary to investigate some new aggregation operator that can reflect the priority relationships among the criteria.
The motivation of this paper is to present a novel decision-making model based on the proposed operators for CO2 geological storage site selection. From the perspective of correlation between criteria, the priority relationship between criteria is considered, and we propose some Pythagorean fuzzy prioritized aggregation operators using the Schweizer–Sklar operations. The original MULTIMOORA method fails to deal with the MCDM problem with Pythagorean fuzzy evaluation information. To increase the method's flexibility, we extend the original MULTIMOORA method in the Pythagorean fuzzy environment.
On the basis of the discussed, the main contributions of this paper are listed below:
-
1.
The CO2 geological storage site selection is a MCDM problem. The integrity of the decision information can be maintained when evaluating each criterion for CO2 storage sites using Pythagorean fuzzy information, leading to more precise assessment results.
-
2.
The aggregation operator largely affects the decision result of the MULTIMOORA method. However, most existing aggregation operators cannot consider the prioritization of criteria. To overcome this drawback, combining the PFS and PA [28] with Schweizer–Sklar t-norm and t-conorm, the Pythagorean fuzzy Schweizer–Sklar prioritized aggregation operators are proposed, and their corresponding properties are studied. The research results can help decision makers to provide theoretical support when solving the problem of CO2 geological storage site selection.
-
3.
The original MULTIMOORA method has the advantages of stability and robustness compared with other MCDM methods. In this paper, we construct an extended MULTIMOORA method based on proposed aggregation operators and apply it to solve the CO2 geological storage site selection problem.
The remainder of this article is organized as follows. In Sect. 2, the related literature is reviewed. In Sect. 3, some theoretical foundations are reviewed, and the Pythagorean fuzzy Schweizer–Sklar prioritized aggregation operators are defined. Furthermore, an extended MULTIMOORA method based on proposed aggregation operators is constructed. In Sect. 4, a numerical example concerning the selection of CO2 storage sites in a Pythagorean fuzzy environment is given. Conclusions are listed in Sect. 5.
2 Related Works
This section discusses the relevant literature on the information aggregation operators, the MULTIMOORA method, and the selection of CO2 geological storage site. In addition, we summarize the existing research gaps.
2.1 Literature Review of Information Aggregation Operators
The information aggregation operators are one of the important concerns in the MCDM problem. They can unify the input information into a comprehensive evaluation value. Garg [29] proposed new sine trigonometric-based operational laws and defined several weighted averaging and geometric operators based on a new sine trigonometric Pythagorean fuzzy numbers. Palanikumar et al. [30] developed some new methods to solve multiple attribute decision-making problems based on Pythagorean neutrosophic normal interval-valued set. Wei and Lu [31] proposed the Pythagorean fuzzy power ordered weighted average (PFPOWA) operator and Pythagorean fuzzy power ordered weighted geometric (PFPOWG) operator to solve MCDM problems. All these existing methods described above are based on different t-norms and t-conorms, which lack flexibility in the process of aggregation.
However, it may be possible that there is a correlation between the decision-making criteria in some situations. To address such a situation, Liu et al. [32] present some new Pythagorean fuzzy linguistic Muirhead mean (PFLMM) operators to deal with MCDM problems with Pythagorean fuzzy linguistic information. Yang et al. [33] developed the Pythagorean fuzzy weighted Bonferroni mean (PFWBM) operator and the Pythagorean fuzzy weighted geometric Bonferroni mean (PFWGBM) operator. Li and Wei [34] introduced the Heronian mean and generalized the Heronian mean to provide two aggregation operators that consider the interdependent phenomena among the aggregated arguments. Xing et al. [35] proposed the Pythagorean fuzzy Choquet–Frank averaging operator and the Pythagorean fuzzy Choquet–Frank geometric operator. Jana et al. [36] constructed some Pythagorean fuzzy power Dombi operators using Dombi operations and the power averaging operator. These existing aggregation operators have not discussed the situation in which the criteria have a priority relationship among them. To tackle this problem in the Pythagorean fuzzy environment, Khan et al. [37] developed the Pythagorean fuzzy prioritized weighted average operator, the Pythagorean fuzzy prioritized weighted geometric operator and its extended forms. Gao [38] developed Pythagorean fuzzy Hamacher prioritized aggregation operators using Hamacher operations and prioritized aggregation operators.
Through the above review, aggregation operators often involve different operations, such as Hamacher, Frank, Maclaurin symmetric mean, Schweizer–Sklar and Dombi operational laws [39]. In particular, the Schweizer–Sklar t-norm and t-conorm [40] are special cases of the Archimedean t-norm and t-conorm. The property of containing parameters makes it more flexible than other operations. As an example, Biswas and Deb [41] utilized the concept of power aggregation operators through Schweizer and Sklar operations to develop Pythagorean fuzzy aggregation operators. Table 1 presents an overview of previous work on the information aggregation operators. It can be seen that there are no studies involving both the Schweizer–Sklar t-norm and t-conorm and the prioritized aggregation operators in the Pythagorean fuzzy environment. In this paper, a new Pythagorean fuzzy aggregation operator is proposed, combining the advantages of prioritized aggregation operators and the Schweizer–Sklar t-norm and t-conorm. It is valuable to note that the operators proposed in this study have the following advantages: (1) It can scientifically consider the priority relationships of criteria based on decision situations. (2) It can take the risk preference of experts into consideration based on the value of the parameter.
2.2 Literature Review of MULTIMOORA Method
MULTIMOORA [15] method is a valid MCDM tool that combines the ratio system, reference point, and full multiplicative form approach. The current research on the MULTIMOORA method focuses on the following two major categories, Table 2 presents an overview of previous work on the MULTIMOORA method.
-
1.
Combination with different fuzzy environments. Over the past few years, the MULTIMOORA method has been expanded under different fuzzy environments. For instance, Wu et al. [16] proposed a probabilistic linguistic MULTIMOORA method, and applied to the selection of shared karaoke television brands. Liang et al. [17] presented a more robust method of MULTIMOORA to solve the MCDM evaluations with interval-valued Pythagorean fuzzy sets. Tian et al. [18] gave an extended picture fuzzy MULTIMOORA method based on the PT, the MULTIMOORA method, and picture fuzzy Dice distance measures, which can be applied to MCDM problems where weight information is completely unknown. Liu et al. [42] developed an intuitionistic linguistic MULTIMOORA method and an intuitionistic linguistic rough MULTIMOORA method. Rani et al. [43] designed a decision support framework by combining MULTIMOORA method with Fermatean fuzzy sets and presented its application in electric vehicle charging station location selection. Irvanizam et al. [44] introduced a new MULTIMOORA technique with trapezoidal fuzzy neutrosophic numbers and employed it for solving group decision-making applications.
-
2.
Combination with different MCDM techniques. MULTIMOORA method could be combined with different MCDM techniques to handle complex decision problems. For instance, Dahooie et al. [45] applied an objective weight determination method called correlation coefficient and standard deviation method to enhance the MULTIMOORA performance. Alkan et al. [46] use fuzzy complex proportional assessment and fuzzy MULTIMOORA methods to rank and evaluate renewable energy in Turkey. Chen et al. [47] proposed an extended MULTIMOORA method based on the ordered weighted geometric averaging operator and Choquet integral for failure mode and effects analysis. Shang et al. [19] designed a hybrid fuzzy decision support system by integrating MULTIMOORA method, best worst method, and fuzzy Shannon entropy method for sustainable supplier selection. He et al. [21] studied an integrated decision-making method using step-wise weight assessment ratio analysis and MULTIMOORA under interval-valued Pythagorean fuzzy sets, confirmed its applicability through an empirical case study of sustainable community-based tourism. Saraji et al. [48] developed an integrated MCDM framework, including step-wise weight assessment ratio analysis and MULTIMOORA method, and employed them for analysis and assessment of the challenges adapting the online education during the COVID-19 outbreak.
2.3 Literature Review of CO2 Geological Storage Site Selection
In recent years, some academics from all around the world have dedicated their work to the field of CO2 geological storage site selection. Establishing a suitable methodology to select the CO2 geological storage site is of certain research value. For example, Guo et al. [5] introduced an extended novel TODIM method based on λ-fuzzy measure and Choquet integral to select the CO2 storage site using evaluation information given by decision makers which can take the form of a probabilistic hesitant fuzzy set. Hsu et al. [11] presented an effective model using the analytic network process method for selecting potential sites for CO2 geological storage in Taiwan. Deveci et al. [12] used fuzzy multi-criteria decision-making methods based on TOPSIS, ELECTRE, and VIKOR to assess the suitable location for CO2 storage in Turkey. Paul et al. [14] used a modified Pythagorean fuzzy VIKOR and DEMATEL approach for selection of CO2 storage site in geological media. Aviso et al. [49] developed a rough set-based machine learning approach to generate a rule-based model for the evaluation of potential CO2 storage sites. Raza et al. [50] presented a comprehensive screening criterion for the identification of a suitable storage site based on key properties. Through comprehensive consideration of CO2 geological storage technology, safety, and economic feasibility, Lu et al. [51] proposed a site ranking methodology for CGS and provided a reference for the selection of CO2 geological storage areas in carbonate reservoirs. Mi et al. [52] constructed an indicator system consisting of 3 indicator layers and 27 indicators. By combining the analytic hierarchy process with the fuzzy comprehensive evaluation method, the geological suitability for CO2 geological storage in 44 secondary tectonic units in the Junggar Basin was evaluated. Table 3 presents an overview of previous work on the CO2 geological storage site selection and compares it with this study.
In the former research, the priority levels of criteria were not given attention, which would lead to biased decision results. The PA operator [28] is an aggregation tool that converts priority levels of criteria into weights, and it has been used in a variety of decision-making domains. It is very reasonable and valid to utilize the PA operator to reflect the priority levels of criteria regarding CO2 geological storage site selection.
2.4 Research Gaps
Following conclusions could be drawn from the analysis of the above literature review.
First, despite the fact that many decision-making methods have been successfully applied in the complex CO2 geological storage site selection process, no research has been conducted on the PFSs-based MCDM model for selecting the best storage site. To solve this problem, this study employs the PFSs to depict the ambiguity and vagueness in the site selection process.
Second, the information aggregation operators play an important role in decision-making frameworks. It is a procedure that combines all of the individual input data into a single aggregated data set. It can be seen that the existing aggregation operators fail to capture the priority relationship among criteria, and the priority relationship among multiple criteria is extremely important in real-world decision-making. Therefore, this study proposes a new aggregation operator to make up for the above defects.
Third, the MULTIMOORA is a flexible method because it combines three powerful methods, such as the ratio system, the reference point approach, and the full multiplicative form to make ranking decisions. The classical MULTIMOORA method has been extended to different fuzzy environments. However, the classical MULTIMOORA method and its extended form fail to handle the CO2 geological storage site selection problems with the Pythagorean fuzzy environment. In view of the above-mentioned facts, we extend the MULTIMOORA method and the proposed operators into the Pythagorean fuzzy environment and construct a new methodology to aid site selection processes in MCDM.
3 Methodology
In this section, we first introduce some fundamental theories about the Pythagorean fuzzy sets, the prioritized average operator, and the Pythagorean fuzzy Schweizer–Sklar operations. Then considering the PA operator can effectively reflect the internal connection between criteria, the Pythagorean fuzzy Schweizer–Sklar prioritized weighted average (PFSSPWA) operator and Pythagorean fuzzy Schweizer–Sklar prioritized weighted geometric (PFSSPWG) operator are developed, and their corresponding properties are proved. Finally, the MULTIMOORA method is extended to compare and rank the alternative sites.
3.1 Theoretical Background
3.1.1 Pythagorean Fuzzy Sets
Pythagorean fuzzy sets (PFSs) [9, 53], as an extension of intuitionistic fuzzy sets, are widely used to deal with complex uncertainty in a variety of decision situations. Its basic concepts are as follows.
Definition 1
[9, 53]. Let \(X\) be a fixed set. A PFS is an object having the form.
where \({\mu }_{A}:X\to \left[0,1\right]\) denotes the degree of membership and \({\nu }_{A}:X\to \left[0,1\right]\) denotes the degree of non-membership of element \(x\in X\) to \(A\), and for each \(x\in X\), the following condition holds:
For any PFS \(A\) and \(x\in X\), \({\pi }_{A}\left(x\right)=\sqrt{1-{\mu }_{A}^{2}\left(x\right)-{\nu }_{A}^{2}\left(x\right)}\) is called the degree of hesitancy of \(x\) to \(A\). Moreover, \(A=\langle {\mu }_{A}\left(x\right),{\nu }_{A}\left(x\right)\rangle \) are the Pythagorean fuzzy numbers (PFNs), which are denoted by \(A=\langle {\mu }_{A},{\nu }_{A}\rangle \), where \({\mu }_{A}\in \left[0,1\right]\), \({\nu }_{A}\in \left[0,1\right]\), \({\pi }_{A}=\sqrt{1-{\mu }_{A}^{2}-{\nu }_{A}^{2}}\), and \({{\mu }_{A}}^{2}+{{\nu }_{A}}^{2} \leqslant 1\).
Definition 2
[9] Let \(\alpha =\langle {\mu }_{\alpha },{\nu }_{\alpha }\rangle \),\({\alpha }_{i}=\langle {\mu }_{{\alpha }_{i}},{\nu }_{{\alpha }_{i}}\rangle \left(i=1,2,\dots ,n\right)\) be some PFNs; then the following operations are given:
-
\({\alpha }_{1}\oplus {\alpha }_{2}=\left\langle \sqrt{{\mu }_{{\alpha }_{1}}^{2}+{\mu }_{{\alpha }_{2}}^{2}-{\mu }_{{\alpha }_{1}}^{2}{\mu }_{{\alpha }_{2}}^{2}},{\nu }_{{\alpha }_{1}}{\nu }_{{\alpha }_{2}}\right\rangle \).
-
\({\alpha }_{1}\otimes {\alpha }_{2}=\left\langle {\mu }_{{\alpha }_{1}}{\mu }_{{\alpha }_{2}},\sqrt{{\nu }_{{\alpha }_{1}}^{2}+{\nu }_{{\alpha }_{2}}^{2}-{\nu }_{{\alpha }_{1}}^{2}{\nu }_{{\alpha }_{2}}^{2}}\right\rangle \).
-
\(\lambda \alpha =\left\langle \sqrt{1-{\left(1-{\mu }_{\alpha }^{2}\right)}^{\lambda },{\nu }_{\alpha }^{\lambda }}\right\rangle ,\lambda >0.\)
-
\({\alpha }^{\lambda }=\left\langle {\mu }_{\alpha }^{2},\sqrt{1-{\left(1-{\nu }_{\alpha }^{2}\right)}^{\lambda }}\right\rangle ,\lambda >0.\)
To rank the PFNs, the score function and the accuracy function are given.
Definition 3
[31] Let \(\alpha =\langle {\mu }_{\alpha },{\nu }_{\alpha }\rangle \) be a PFN. A score function \(S\) of a PFN can be represented as follows:
Definition 4
[54] Let \(\alpha =\langle {\mu }_{\alpha },{\nu }_{\alpha }\rangle \) be a PFN. An accuracy function \(H\) of a PFN can be represented as follows:
Definition 5
[54] Let \({\alpha }_{i}=\langle {\mu }_{{\alpha }_{i}},{\nu }_{{\alpha }_{i}}\rangle \left(i=1,2\right)\) be two PFNs; if \(S\left({\alpha }_{1}\right)>S\left({\alpha }_{2}\right)\), then \({\alpha }_{1}>{\alpha }_{2}\); if \(S\left({\alpha }_{1}\right)=S\left({\alpha }_{2}\right)\), then ① if \(H\left({\alpha }_{1}\right)>H\left({\alpha }_{2}\right)\), then \({\alpha }_{1}>{\alpha }_{2}\); ② if \(H\left({\alpha }_{1}\right)=H\left({\alpha }_{2}\right)\), then \({\alpha }_{1}={\alpha }_{2}\).
Definition 6
[55] Let \(X\) be a fixed set and \({\alpha }_{i}=\langle {\mu }_{{\alpha }_{i}},{\nu }_{{\alpha }_{i}}\rangle \left(i=1,2\right)\) be two PFNs; then, the distance measure between two PFSs is defined as.
where \({\pi }_{{\alpha }_{1}}\) and \({\pi }_{{\alpha }_{2}}\) are the hesitant degrees of element \(x\) belonging to \({\alpha }_{1}\),\({\alpha }_{2}\).
3.1.2 Prioritized Average Operator
The PA operator [28] was first presented by Yager, and it is widely used in the information aggregation field. It considers the priority relationship between criteria, making information aggregation more scientific. The PA operator was given as follows:
Definition 7
Let \(C=\left({C}_{1},{C}_{2},\dots ,{C}_{n}\right)\) be a set of the criterion, that there is a prioritization between the criteria expressed by the linear ordering \({C}_{1}\succ {C}_{2}\succ {C}_{3}\succ \cdots \succ {C}_{n}\), indicating that criterion \({C}_{j}\) has a higher priority than \({C}_{k}\) if \(\forall j<k\). The value \({C}_{j}\left(x\right)\) is the performance of any alternative \(x\) under criterion \({C}_{j}\) and satisfies \({C}_{j}\left(x\right)\in \left[0,1\right]\). The PA operator is defined as:
where \({\omega }_{j}=\frac{{T}_{j}}{{\sum }_{j=1}^{n}{T}_{j}}\), \({T}_{j}=\prod_{k=1}^{j-1}{C}_{k}\left(x\right)\left(j=2,3,\dots ,n\right)\), \({T}_{1}=1\).
3.1.3 Pythagorean Fuzzy Schweizer–Sklar Operations
The Schweizer–Sklar product and Schweizer–Sklar sum, which are special examples of the Archimedean t-norm and t-conorm, respectively, are involved in Schweizer-Sklar operations.
Definition 8
[40] Assume \(x\) and \(y\) are any two real numbers. Then the definitions of the Schweizer–Sklar t-norm and t-conorm are shown as follows:
where \(\eta <0;x,y\in \left[0,1\right]\).
The Schweizer–Sklar operational rules on PFNs using Schweizer–Sklar t-norm and t-conorm are introduced as the following:
Definition 9
[41] Let \(\alpha =\langle {\mu }_{\alpha },{\nu }_{\alpha }\rangle \),\({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2\right)\) be three PFNs, and let \(\eta <0,\gamma >0\). Then Schweizer–Sklar operations of the t-norm and t-conorm of PFNs are proposed as follows:
-
1.
\({\alpha }_{1}\oplus {\alpha }_{2}=\left\langle \sqrt{1-{\left[{\left(1-{\mu }_{1}^{2}\right)}^{\eta }+{\left(1-{\mu }_{2}^{2}\right)}^{\eta }-1\right]}^{1/\eta }},\sqrt{{\left[{\nu }_{1}^{2\eta }+{{\nu }_{2}^{2}}^{\eta }-1\right]}^{1/\eta }}\right\rangle\)
-
2.
\({\alpha }_{1}\otimes {\alpha }_{2}=\left\langle \sqrt{{\left[{\mu }_{1}^{2\eta }+{\mu }_{2}^{2\eta }-1\right]}^{1/\eta }},\sqrt{1-{\left[{\left(1-{\nu }_{1}^{2}\right)}^{\eta }+{\left(1-{\nu }_{2}^{2}\right)}^{\eta }-1\right]}^{1/\eta }}\right\rangle \)
-
3.
\(\gamma \alpha =\left\langle \sqrt{1-{\left[\gamma {\left(1-{\mu }_{\alpha }^{2}\right)}^{\eta }-\left(\gamma -1\right)\right]}^{1/\eta }}, \sqrt{{\left[{\nu }_{\alpha }^{2\eta }-\left(\gamma -1\right)\right]}^{1/\eta }}\right\rangle \).
-
4.
\({\alpha }^{\gamma }=\left\langle \sqrt{{\left[\gamma {\mu }_{\alpha }^{2\eta }-\left(\gamma -1\right)\right]}^{1/\eta }},\sqrt{1-{\left[\gamma {\left(1-{\nu }_{\alpha }^{2}\right)}^{\eta }-\left(\gamma -1\right)\right]}^{1/\eta }}\right\rangle .\)
3.2 Pythagorean Fuzzy Schweizer–Sklar Prioritized Weighted Average Operator
In this subsection, according to the operational rules of PFNs with respect to Schweizer–Sklar operations in Definition 9 and the advantages of the PA operator in Definition 7, the PFSSPWA operator is established, and its enviable properties are discussed.
Definition 10
Let \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) be a set of PFNs, then the PFSSPWA operator is a function \({\text{PFSSPWA}}:{\text{PF}}{N}^{n}\to {\text{PFN}}\) such that:
where \({T}_{1}=1\) and \({T}_{i}=\prod_{k=1}^{i-1}S\left({\alpha }_{k}\right),\left(i=2,3,\ldots ,n\right)\). Here, \(S\left({\alpha }_{k}\right)\) expresses the score value of PFNs.
We obtain the following theorem that follows the Schweizer–Sklar operations on PFNs.
Theorem 1
Suppose \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) is a set of PFNs and \(\eta <0\), then the value aggregated by the proposed PFSSPWA operator is also a PFE and is specified by:
Proof
From the mathematical induction, Eq. (10) can be proved as follows:
-
(1)
If \(n=2\), we have
$$\begin{aligned}\frac{{T}_{1}}{{\sum }_{i=1}^{2}{T}_{i}}{\alpha }_{1}=\left\langle \sqrt{1-{\left[\frac{{T}_{1}}{{\sum }_{i=1}^{2}{T}_{i}}{\left(1-{\mu }_{1}^{2}\right)}^{\eta }-\left(\frac{{T}_{1}}{{\sum }_{i=1}^{2}{T}_{i}}-1\right)\right]}^{1/\eta }} \right. , \\ \left. \sqrt{{\left[\frac{{T}_{1}}{{\sum }_{i=1}^{2}{T}_{i}}{\nu }_{1}^{2\eta }-\left(\frac{{T}_{1}}{{\sum }_{i=1}^{2}{T}_{i}}-1\right)\right]}^{1/\eta }}\right\rangle \end{aligned} $$$$\begin{aligned}\frac{{T}_{2}}{{\sum }_{i=1}^{2}{T}_{i}}{\alpha }_{2}=\left\langle \sqrt{1-{\left[\frac{{T}_{2}}{{\sum }_{i=1}^{2}{T}_{i}}{\left(1-{\mu }_{2}^{2}\right)}^{\eta }-\left(\frac{{T}_{2}}{{\sum }_{i=1}^{2}{T}_{i}}-1\right)\right]}^{1/\eta }} \right., \\ \left. \sqrt{{\left[\frac{{T}_{2}}{{\sum }_{i=1}^{2}{T}_{i}}{\nu }_{2}^{2\eta }-\left(\frac{{T}_{2}}{{\sum }_{i=1}^{2}{T}_{i}}-1\right)\right]}^{1/\eta }}\right\rangle \end{aligned}$$
Then
Thus, when \(n=2\), Eq. (10) is correct.
-
(2)
Suppose \(n=m\), then Eq. (10) is correct, and we have
$$\mathrm{PFSSPWA}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{m}\right)=\left\langle \sqrt{1-{\left[\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\left(1-{\mu }_{i}^{2}\right)}^{\eta }-\left(\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}-1\right)\right]}^{1/\eta }},\sqrt{{\left(\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\nu }_{i}^{2\eta }-\left(\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}-1\right)\right)}^{1/\eta }}\right\rangle =\left\langle \sqrt{1-{\left[\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\left(1-{\mu }_{i}^{2}\right)}^{\eta }\right]}^{1/\eta }},\sqrt{{\left(\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\nu }_{i}^{2\eta }\right)}^{1/\eta }}\right\rangle $$ -
(3)
If \(n=m+1\), we have
$$\mathrm{PFSSPWA}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{m+1}\right)=\mathrm{PFSSPWA}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{m}\right)\oplus \frac{{T}_{m+1}}{{\sum }_{i=1}^{m+}{T}_{i}}{\alpha }_{m+1}\bigg\langle \sqrt{1-{\left[\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m+1}{T}_{i}}{\left(1-{\mu }_{i}^{2}\right)}^{\eta }-\left(\sum_{i=1}^{m}\frac{{T}_{i}}{{\sum }_{i=1}^{m+1}{T}_{i}}-1\right)+\frac{{T}_{m+1}}{{\sum }_{i=1}^{n}{T}_{i}}{\left(1-{\mu }_{m+1}^{2}\right)}^{\eta }-\left(\frac{{T}_{m+1}}{{\sum }_{i=1}^{n}{T}_{i}}-1\right)-1\right]}^{1/\eta }},$$$$ \left. {\sqrt {\left( {\sum\limits_{{i = 1}}^{m} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{m} T_{i} }}} \nu _{i}^{{2\eta }} - \left( {\sum\limits_{{i = 1}}^{m} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{m} T_{i} }}} - 1} \right) + \frac{{T_{{m + 1}} }}{{\sum _{{i = 1}}^{n} T_{i} }}\nu _{{m + 1}}^{{2\eta }} - \left( {\frac{{T_{{m + 1}} }}{{\sum _{{i = 1}}^{n} T_{i} }} - 1} \right)} \right)^{{1/\eta }} } } \right\rangle = \left\langle {\sqrt {1 - \left[ {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} \left( {1 - \mu _{i}^{2} } \right)^{\eta } - \left( {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} - 1} \right)} \right]^{{1/\eta }} } ,\sqrt {\left( {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} \nu _{i}^{{2\eta }} - \left( {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} - 1} \right)} \right)^{{1/\eta }} } } \right\rangle = \left\langle {\sqrt {1 - \left[ {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} \left( {1 - \mu _{i}^{2} } \right)^{\eta } } \right]^{{1/\eta }} } ,\sqrt {\left( {\sum\limits_{{i = 1}}^{{m + 1}} {\frac{{T_{i} }}{{\sum _{{i = 1}}^{{m + 1}} T_{i} }}} \nu _{i}^{{2\eta }} } \right)^{{1/\eta }} } } \right\rangle $$
Thus, when \(n=m+1\), Eq. (10) is also correct. Hence, Theorem 1 is proved.
Theorem 2
(Idempotency) Assume \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) is a set of PFNs; if \({\alpha }_{i}=\alpha =\langle \mu ,\nu \rangle ,\left(i=1,2,\dots ,n\right)\), then \({\text{PFSSPWA}}=\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right)=\alpha \).
Proof
\(\begin{array}{l}{\text{PFSSPWA}}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right)=\left\langle \sqrt{1-{\left(\sum_{i=1}^{n}\frac{{T}_{n}}{{\sum }_{i=1}^{n}{T}_{i}}{\left(1-{\mu }_{i}^{2}\right)}^{\eta } \right)}^{\frac{1}{\eta }}},\sqrt{{\left(\sum_{i=1}^{n}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\nu }_{i}^{2\eta }\right)}^{1/\eta }}\right\rangle \\ =\left\langle \sqrt{1-{\left(\sum_{i=1}^{n}\frac{{T}_{n}}{{\sum }_{i=1}^{n}{T}_{i}}{\left(1-{\mu }^{2}\right)}^{\eta } \right)}^{\frac{1}{\eta }}},\sqrt{{\left(\sum_{i=1}^{n}\frac{{T}_{i}}{{\sum }_{i=1}^{m}{T}_{i}}{\nu }^{2\eta }\right)}^{1/\eta }}\right\rangle =\langle \mu ,\nu \rangle =\alpha \end{array}\)
Then, the proof of Theorem 2 is completed.
Theorem 3
(Monotonicity) Assume \({\alpha }_{i}=\langle {\mu }_{{\alpha }_{i}},{\nu }_{{\alpha }_{i}}\rangle \) and \({\beta }_{i}=\langle {\mu }_{{\beta }_{i}},{\nu }_{{\beta }_{i}}\rangle \), \(i=\left(1,2,\dots ,n\right)\) as two sets of PFNs; if \({\mu }_{{\alpha }_{i}} \leqslant {\mu }_{{\beta }_{i}},{\nu }_{{\alpha }_{i}} \leqslant {\nu }_{{\beta }_{i}},\forall i\in \left\{1,2,\dots ,n\right\}\), then \(\mathrm{PFSSPWA}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right) \leqslant \mathrm{PFSSPWA}\left({\beta }_{1},{\beta }_{2},\dots ,{\beta }_{n}\right)\).
Proof
Since \({\mu }_{{\alpha }_{i}} \leqslant {\mu }_{{\beta }_{i}},\forall i\in \left\{1,2,\ldots ,n\right\}\),
Similarly, if \({\nu }_{{\alpha }_{i}} \leqslant {\nu }_{{\beta }_{i}},\forall i\in \left\{1,2,\dots ,n\right\}\), the following results can be obtained.
Thus, Theorem 3 can be obtained.
Theorem 4
(Boundedness) Assume \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) is a set of PFNs; if \({\alpha }_{\mathrm{min}}=\langle \underset{i}{\mathrm{min}}\left({\mu }_{i}\right),\underset{i}{\mathrm{max}}\left({\nu }_{i}\right)\rangle \),\({\alpha }_{\mathrm{max}}=\langle \underset{i}{\mathrm{max}}\left({\mu }_{i}\right),\underset{i}{\mathrm{min}}\left({\nu }_{i}\right)\rangle \), then \({\alpha }_{\mathrm{min}} \leqslant \mathrm{PFSSPWA}\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right) \leqslant {\alpha }_{\mathrm{max}}\).
Proof
Since \(\underset{i}{\mathrm{min}}\left({\mu }_{i}\right) \leqslant {\mu }_{i} \leqslant \underset{i}{\mathrm{max}}\left({\mu }_{i}\right)\) and \(\underset{i}{\mathrm{min}}\left({\nu }_{i}\right) \leqslant {\nu }_{i} \leqslant \underset{i}{\mathrm{max}}\left({\nu }_{i}\right)\), for \(\forall i\in \left\{1,2,\ldots ,n\right\}\), then from Theorem 3, we can get
Similarly,
Thus, Theorem 4 is true.
3.3 Pythagorean Fuzzy Schweizer–Sklar Prioritized weighted Geometric Operator
In this subsection, the PFSSPWG operator is proposed and some of its desirable properties are investigated in detail.
Definition 11
Let \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\ldots ,n\right)\) be a set of PFNs, then the PFSSPWG operator is a function \(\mathrm{PFSSPWG}:{\mathrm{PFN}}^{n}\to \mathrm{PFN}\) such that:
where \({T}_{1}=1\) and \({T}_{i}=\prod_{k=1}^{i-1}S\left({\alpha }_{k}\right),\left(i=2,3,\ldots ,n\right)\). Here, \(S\left({\alpha }_{k}\right)\) expresses the score value of PFNs.
Theorem 5
Suppose \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) is a set of PFNs and \(\eta <0\), then the value aggregated by the proposed PFSSPWG operator is also a PFN and is specified by:
The proof of this theorem is similar to the proof of Theorem 1.
Similar to Theorems 2–4, it can be easily proven that the PFSSPWG operator has the following properties:
Theorem 6
(Idempotency) Assume \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\dots ,n\right)\) is a set of PFNs; if \({\alpha }_{i}=\alpha =\langle \mu ,\nu \rangle ,\left(i=1,2,\dots ,n\right)\), then \(PFSSPWG=\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right)=\alpha \).
Theorem 7
(Monotonicity) Assume \({\alpha }_{i}=\langle {\mu }_{{\alpha }_{i}},{\nu }_{{\alpha }_{i}}\rangle \) and \({\beta }_{i}=\langle {\mu }_{{\beta }_{i}},{\nu }_{{\beta }_{i}}\rangle \), \(i=\left(1,2,\dots ,n\right)\) as two sets of PFNs; if \({\mu }_{{\alpha }_{i}} \leqslant {\mu }_{{\beta }_{i}},{\nu }_{{\alpha }_{i}} \leqslant {\nu }_{{\beta }_{i}},\forall i\in \left\{1,2,\dots ,n\right\}\), then \(PFSSPWG\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right) \leqslant PFSSPWG\left({\beta }_{1},{\beta }_{2},\dots ,{\beta }_{n}\right)\).
Theorem 8
(Boundedness) Assume \({\alpha }_{i}=\langle {\mu }_{i},{\nu }_{i}\rangle \left(i=1,2,\ldots ,n\right)\) is a set of PFNs; if \({\alpha }_{\mathrm{min}}=\langle \underset{i}{\mathrm{min}}\left({\mu }_{i}\right),\underset{i}{\mathrm{max}}\left({\nu }_{i}\right)\rangle \),\({\alpha }_{\mathrm{max}}=\langle \underset{i}{\mathrm{max}}\left({\mu }_{i}\right),\underset{i}{\mathrm{min}}\left({\nu }_{i}\right)\rangle \), then \({\alpha }_{\mathrm{min}} \leqslant PFSSPWG\left({\alpha }_{1},{\alpha }_{2},\dots ,{\alpha }_{n}\right) \leqslant {\alpha }_{\mathrm{max}}\).
3.4 A New MULTIMOORA Method Based on Pythagorean Fuzzy Schweizer–Sklar Prioritized Aggregation Operators
This subsection utilizes the proposed Pythagorean fuzzy Schweizer–Sklar prioritized aggregation operators and the existing classical MULTIMOORA method to develop a new MULTIMOORA method (named PFSSPA-MULTIMOORA) for MCDM in Pythagorean fuzzy environments. The following assumptions or notations are used to illustrate the considered problem. Let \(A=\left({a}_{1},{a}_{2},\dots ,{a}_{m}\right)\) represent a set of alternatives and \(C=\left({c}_{1},{c}_{2},\dots ,{c}_{n}\right)\) represent a set of criteria that satisfy the prioritization condition: \({c}_{1}\succ {c}_{2}\succ {c}_{3}\succ \cdots \succ {c}_{n}\), which indicates that criterion \({c}_{i}\) has a higher significance than \({c}_{j}\), for \(\forall i<j\). Suppose that \({D}^{t}={\left({x}_{ij}^{t}\right)}_{m\times n}={\langle {\mu }_{ij},{\nu }_{ij}\rangle }_{m\times n}\) is the Pythagorean fuzzy decision matrix provided by experts \(t=\left(1,2,\ldots ,p\right)\) to evaluate the degrees of the alternative \({x}_{i}\left(i=1,2,\dots ,m\right)\) which satisfy the criterion \({C}_{j}\left(j=1,2,\dots ,n\right)\). The prioritization of experts satisfies \({t}_{1}\succ {t}_{2}\succ \cdots \succ {t}_{p}\). Then the decision-making process for the PFSSPA-MULTIMOORA method is shown in Fig. 1.
As shown in Fig. 1, the method involves the following steps.
Step 1: The decision matrix is constructed by experts in Pythagorean fuzzy environments.
In the MCDM process, the criteria of alternatives can be determined by experts, and they need to give corresponding evaluation values. The corresponding decision matrix is denoted as \({D}^{t}={\left({x}_{ij}^{t}\right)}_{m\times n}={\langle {\mu }_{ij},{\nu }_{ij}\rangle }_{m\times n}\).
Step 2: Normalize the data.
Generally, there are two forms of criteria in the MCDM problem, including the benefit type and the cost type. To eliminate the influence caused by different types, the criteria should be transformed into the same type. Then the data normalization of each \({x}_{ij}\) can be computed by Eq. (13).
where \({x}_{ij}^{c}\) denotes the complement of \({x}_{ij}\).
Step 3: Aggregate the individual decision opinions to a comprehensive decision matrix.
In this step, we can utilize the PFSSPWA to create the aggregated decision matrix \({D}^{*}={\left({x}_{ij}^{*}\right)}_{m\times n}\), where the weight vector \({V}_{t}=\left({v}_{1},{v}_{2},\dots ,p\right)\) holds for different experts. Then the aggregated evaluation values of all experts can be determined as:
where \(\sum_{i=1}^{p}{v}_{i}=1\), the value of \({v}_{1}>{v}_{2}>\cdots >{v}_{p}\) represents the prioritization of experts, and the weight value is given in some cases.
Step 4: The Pythagorean fuzzy ratio system (PF-RS) involves the following three steps:
(1) Aggregate the Pythagorean fuzzy values of alternatives into collective values using the proposed Pythagorean fuzzy Schweizer–Sklar prioritized weighted average operator, i.e.,
where \({T}_{ij}=\prod_{k=1}^{j-1}S\left({x}_{ik}\right)\) and \({T}_{i1}=1\left(i=1,2,\dots , m; \, j=2,3,\dots ,n\right)\).
(2) Equation. (3) is utilized to calculate the score value \({S}_{1}\left({y}_{i}\right)\) of each alternative.
(3) Rank the alternatives. The higher the value of \({S}_{1}\left({y}_{i}\right)\), the better the alternatives \({a}_{i}\), i.e.,
Step 5: Pythagorean fuzzy reference point (PF-RP) approach. The main idea of this method is to find a suitable reference point and calculate the distance of the alternatives to the reference point. It involves the following three steps:
(1) In this step, the Pythagorean fuzzy reference point \(f=\left({f}_{1},{f}_{2}.\cdots ,{f}_{n}\right)\) can be calculated by Eq. (17)
(2) Combined with the distance measure Eq. (5) of Pythagorean fuzzy numbers, calculate the normalized distance from the comprehensive evaluation value of alternatives to the reference point, i.e.,
(3) Rank the alternatives. The rank principle is that the lower the value of \(d\) is, the better the alternatives \({a}_{i}\), i.e.,
Step 6: The Pythagorean fuzzy full multiplicative form (PF-FMF) mainly uses the product operator to assemble the evaluation matrix of each alternative. It also involves the following three steps:
(1) Aggregate the Pythagorean fuzzy values of alternatives into collective values using the proposed Pythagorean fuzzy Schweizer–Sklar prioritized weighted geometric operator, i.e.,
where \({T}_{ij}=\prod_{k=1}^{j-1}S\left({x}_{ik}\right)\) and \({T}_{i1}=1\left(i=1,2,\dots ,m;j=2,3,\dots ,n\right)\).
(2) Equation. (3) is utilized to calculate the score value \({S}_{3}\left({y}_{i}\right)\) of each alternative.
(3) Rank the alternatives. The higher the value of \({S}_{3}\left({y}_{i}\right)\), the better the alternatives \({a}_{i}\), i.e.,
Step 7: The improved Borda rule. Wu et al.[16] proposed the improved Borda rule to avoid the limitation of dominance theory. It considers the ranking values \({S}_{\zeta }\left({y}_{i}\right)\left(\zeta =1,2,3\right)\) of each alternative \({a}_{i}\left(i=1,2,\dots ,m\right)\) under three different subsystems (PF-RS, PF-RP, and PF-FMF). We can utilize the improved Borda rule to aggregate the above ranking results into the final ranking. The details are as follows:
Normalize the ranking values \({S}_{\zeta }\left({y}_{i}\right)\) of the three subsystems, i.e.,
The final ranking results of alternatives are computed as
where \({\rho }_{\zeta }\left({y}_{i}\right)\) denotes the ranking order of each alternative in three subsystems. Then the alternative with the higher final ranking result is better. Thus, the alternatives can be ranked in descending order of their final ranking results.
4 Case Study
CO2 geological storage site selection is an important part of CCUS [5, 52, 56], which has received extensive attention and heated discussion in academic circles. This section treats CO2 geological storage site selection as an MCDM problem to demonstrate the applicability of the proposed method. The proposed method's results are then compared to those of other methods to validate the validity and benefits of our work.
4.1 Application of the Proposed Method
Large-scale CO2 emissions have led to climate change. Reducing CO2 emissions and mitigating the impact of CO2 on climate change have become global goals. CCUS technology is an important way to reduce CO2 emissions. In general, CCUS comprises three main steps: CO2 capture from large point sources, CO2 transportation, and CO2 storage. China is the largest producer and consumer of coal in the world, and coal is the main source of energy. Coal accounts for 76% of China's primary energy consumption. It is predicted that this proportion will not change much over a long period of time. Therefore, CCUS has become one of the most hopeful technologies in China. CO2 storage site selection is an important part of CCUS project management; it is nearly the elementary procedure for the completion of CO2 geological storage [5]. Thus, on the premise of ensuring CO2 capture and transportation, it is necessary to form a complete decision method on how to select a suitable storage location.
Based on the literature, after several rounds of discussion by experts, there are five decision criteria \(C=\left\{{c}_{1},{c}_{2},{c}_{3},{c}_{4},{c}_{5}\right\}\) for this evaluation. Moreover, the weights of the criteria are unknown and satisfy \({c}_{1}\succ {c}_{2}\succ {c}_{3}\succ {c}_{4}\succ {c}_{5}\).The details are as follows.
The environmental risk \({c}_{1}:\) Evaluation index is very important for the evaluation of CO2 geological storage. Any CO2 leakage during the several phases of the CCUS technology will have an ecological impact because of the characteristics of CO2 itself. The environmental risks during the stages of capture and transportation are often minor given the state of technology, and the main environmental risk is associated with the storage and use of CO2 in the earth's crust. Therefore, it is particularly important to conduct a scientific geological survey and identify related risk factors in the early stages of site selection.
Technical impact \({c}_{2}\): CO2 geological storage technology requires a high level of integration of various technologies, and it is necessary to promote the development of each link in an orderly and balanced manner. Since there is uncertainty and risk in geological exploration and geological storage, companies need to make a comprehensive assessment of stratigraphic structure, storage potential, storage risk, and other issues.
Investment costs \({c}_{3}\): The investment cost of CO2 geological storage mainly includes land development engineering expenses such as pre-engineering planning, design, and hydrogeological survey. It is an important indicator for decision makers to evaluate the feasibility of the project.
Social impact \({c}_{4}\): The social impact consists of the following two main aspects: (1) distance to residential sites. To ensure the safety of the project, the geological storage site was chosen as far away from residential areas as possible. (2) The construction and operation of the project will have a certain impact on the lives of nearby residents. The risk of CO2 leakage may reduce the acceptance of CCUS projects by nearby residents. Therefore, social impact is a necessary consideration for the construction of CCUS projects.
Policy support \({c}_{5}\): Since 2006, China has issued more than 20 national policies involving CCUS, establishing the importance of CCUS in addressing climate change, and actively promoting the CCUS technology and the construction of demonstration projects. However, special laws, regulations, and standard systems for CCUS have not yet been established. Therefore, it is very important to introduce clear government policies and establish special laws, regulations, and standards as soon as possible for the large-scale implementation of CCUS projects.
It is estimated that China can sequester 1.21 trillion to 4.13 trillion tons of carbon dioxide by geological storage alone, with huge carbon storage potential. In this study, after preliminary screening by the expert group, four storage sites were identified for further evaluation and selection. The specific information about the four candidate sites is as follows, and Fig. 2 shows the geographical location of the four sites.
The Songliao Basin (\({a}_{1}\)) is a large sedimentary basin in northeastern China, spanning four provinces: Heilongjiang, Jilin, Liaoning, and the Inner Mongolia Autonomous Region. There are many Middle Cenozoic oil-bearing basins around the basin, and there are 23 sedimentary basins with a deposition area larger than 500 km2. The storage potential is about 694.5 billion tons.
The Bohaiwan Basin (\({a}_{2}\)), an important oil- and gas-bearing basin in eastern China, is currently the basin with the highest total oil and gas production in China. The Bohaiwan Basin includes the cities of Beijing and Tianjin and parts of the four provinces of Hebei, Shandong, Henan, and Liaoning, as well as the waters of the Bohai Sea, covering an area of about 200,000 square kilometers. The basin includes seven major oil fields in Liaohe, North China, Dagang, Jidong, Shengli, Zhongyuan, and Bohai.
The Tarim Basin (\({a}_{3}\)) is located in the south of Xinjiang, China, between the Tianshan Mountains, Kunlun Mountains, and Alpine Mountains, and is the largest closed basin in China. The Tarim Basin is rich in oil and gas resources, especially natural gas reserves, which account for 1/4 of the country's land-based natural gas reserves. 18.4 billion tons of oil and gas resources are forecast, including 10.1 billion tons of oil and 8.3 trillion cubic meters of natural gas, making it the starting point for China's “West–East Gas Transmission”.
The Ordos Basin (\({a}_{4}\)) is located in the western part of the North China Plate, which is the second largest sedimentary basin and an important energy base in China. It is rich in oil and gas resources, featuring a wide distribution of oil and gas, many oil-bearing sections, and a large thickness of oil layers. The basin’s deep saline layer is widely distributed, with several reservoir-cover combinations suitable for CO2 geological storage, and the total CO2 storage potential is estimated to be in the tens of billions of tons, with broad storage prospects.
To ensure the scientificity and objectivity of this evaluation, experts from scientific research institutions, government departments, nonprofit organizations, and senior engineering technicians were invited to participate in the evaluation. At the beginning of the evaluation period, experts were under time pressure and had limited reference materials, and their own experience with related problems was also limited. Experts are willing to use Pythagorean fuzzy numbers to express their judgment on related problems. It is helpful to reflect uncertainty about the evaluation problem. Tables 4, 5, and 6 show the outcome of Pythagorean fuzzy group decision-making after standardization.
The proposed PFSSPA-MULTIMOORA method is used to handle the above CO2 geological storage site selection problem as follows:
Step 1: The Pythagorean fuzzy matrices of each expert are shown in Tables 4, 5, and 6.
Step 2: Since the measurement scales of all the criteria are the same, there is no need to do so.
Step 3: Calculate the aggregated evaluation values of all experts using Eq. (14), and we let \(\eta =-2\). The results are shown in Table 7, and the weight of each criterion is shown in Table 8.
Step 4: In the PF-RS approach, the aggregate values of alternatives can be calculated by Eq. (15). Then score values and rankings of alternatives are given in Table 9.
Step 5: In the PF-RF approach, the reference points can be calculated based on Eq. (17), and the corresponding Pythagorean fuzzy sets are shown in Table 10. Distances from each alternative to all the coordinates of the reference point were calculated by Eq. (18), and the final ranking is presented in Table 11.
Step 6: In the PF-FMF approach, the aggregate values of alternatives can be calculated by Eq. (20). Then score values and rankings of alternatives are given in Table 12.
Step 7: Using Eq. (22), the three MULTIMOORA subsystem ranking score values were normalized as follows:
Then based on \({S}_{\zeta }^{\mathrm{^{\prime}}}\left({y}_{i}\right)\), the Borda scores \({\Psi }_{i}\) of alternatives were calculated by Eq. (23), the final ranking was calculated and is shown in Table 13, the visual ranking result is shown in Fig. 3.
In summary, the final ranking order of the alternatives is \({a}_{3}\succ {a}_{4}\succ {a}_{1}\succ {a}_{2}\). The proposed method determined “The Tarim Basin (\({a}_{3}\))” as the best site for CO2 geological storage in China. Next, we mainly explore the impact of the parameter \(\eta \) on the proposed model and compare our proposed model with the other Pythagorean fuzzy MCDM methods to highlight their effectiveness.
4.2 Sensitivity Analysis
From the definition of the PFSSPW operator, it can be seen that the decision-making process based on the PFSSPWA operator and PFSSPWG operator varies with the parameter \(\eta \). To understand the performance of aggregation in depth, we adopt the parameter \(\eta =-1,-10,-20,-50,-100\) for the numerical example below. When the parameters \(\eta \) take different values, the score values can be obtained as shown in Figs. 4, 5, and 6 by PF-RS, PF-RP, and PF-FMF. Then the final score values are shown in Fig. 7.
In Fig. 4, for the PF-RS method, it is necessary to notice that the graphs corresponding to the score values of the alternatives are monotonically decreasing. This demonstrates that the higher value of the parameter \(\eta \) must be assigned for making pessimistic decisions, whereas for making optimistic decisions, the decision maker selects a smaller value of the parameter \(\eta \). In Fig. 5, for the PF-RP method, if \(\eta =-1\), then \({a}_{3}\succ {a}_{4}\); if \(\eta =-10\), then \({a}_{4}\succ {a}_{3}\), and the smaller the value of the parameter \(\eta \) is, the smaller the difference between \({a}_{3}\) and \({a}_{4}\). In Fig. 6, for the PF-FMF method, the smaller the value of the parameter \(\eta \) is, the smaller the score value of \({a}_{1}\). The score values of \({a}_{2},{a}_{3},{a}_{4}\) have minor fluctuations with the parameter \(\eta \). In Fig. 7, it can be seen that the final ranking of alternatives is fixed no matter how the values of η are changed in the example, and the consistent ranking results demonstrate the robustness of the proposed approach.
4.3 Comparison Analysis
In this section, the proposed method is compared with other Pythagorean fuzzy MCDM methods to further validate the flexibility and rationality. The ranking results of the selected methods are shown in Table 14. To provide a more visual comparison, the results of Table 14 are represented using a histogram, as shown in Fig. 8.
It can be seen that the ranking results obtained using the PFLMM operator [32], the PFWBM operator [33], and the PFWGBM operator [33] are the same as those derived by our proposed method. This illustrates the feasibility and effectiveness of the proposed method. However, the results using the PFPOWA operator [31] and the PFPOWG operator [31] are completely different from our method. That is because our method is based on Schweizer-Sklar t-norm and t-conorm operations by adding an intrinsic parameter in both aggregation operators and may lead to reasonable conclusions.
An MCDM method based on the Pythagorean fuzzy Dombi weighted average (PFDWA) operator and Pythagorean fuzzy Dombi weighted geometric (PFDWG) operator [57], a better expression of application within the general parameter, was created by Jana. With the general parameter set to 1, the weights of the criteria are equal, and the ranking result is \({a}_{4}\succ {a}_{3}\succ {a}_{1}\succ {a}_{2}\). The best alternatives proposed by this method are different from those in our method, but the worst one is the same as ours.
Considering the interaction between the membership and non-membership functions in a Pythagorean fuzzy environment, Wei developed the Pythagorean fuzzy interaction weighted average (PFIWA) operator and the Pythagorean fuzzy interaction weighted geometric (PFIWG) operator [58] on the basis of traditional arithmetic and geometric operations. The ranking results obtained using this method are identical to those obtained using our method. So, the methods in this paper are effective and feasible. However, Wei’s method only considers the existence of interaction in PFNs, while our method considers the levels of priority in the criteria. Therefore, our method can more flexibly reflect the uncertainty in the decision-making process.
The Pythagorean fuzzy Einstein weighted average (PFEWA) operator and Pythagorean fuzzy Einstein ordered weighted average (PFEOWA) operator [59] were presented by Garg and extended the notion of aggregating the different PFNs using Einstein t-norm and t-conorm operations. The ranking results obtained using this method are different from those obtained using our method. In addition, the calculation process for this method is more complicated. Furthermore, Garg's methods do not take into account the interconnection of the input arguments, whereas the method proposed here can simulate the relationship between criteria; thus, our method is more realistic.
The Pythagorean fuzzy technique for order preference by similarity to an ideal solution (TOPSIS) method [55] compared to our method, the best alternative is always \({a}_{3}\), despite the different ranking of alternatives \({a}_{1}\), \({a}_{2}\) and \({a}_{4}\). The main idea of the Pythagorean fuzzy TOPSIS method is that the best alternative is the one that is closest to the positive ideal solution and farthest from the negative one. In addition, the Pythagorean fuzzy TOPSIS method uses the weighted average operator to aggregate the performances of alternatives, resulting in different ranking results.
An algorithm for solving the MCDM problem based on combinative distance-based assessment (CODAS) in a Pythagorean fuzzy environment was proposed by Peng [60]. The best alternative and the worst alternative proposed by this method are the same as those in our method, namely, \({a}_{3}\) is the best choice, and \({a}_{1}\) is the worst choice. However, the ranking results of \({a}_{1}\) and \({a}_{4}\) are different. The reason for this divergence is that Peng’s method used the Pythagorean fuzzy Euclidean distance measure and a novel score function for PFNs to judge the gap between each alternative and the negative ideal point. In our method, the rankings of the three subsystems (PF-RS, PF-RP, and PF-FMF) are combined to obtain the final ranking. Thus, our method is more representative.
The ordering position of the alternatives obtained using Gul’s method [61], based on the Pythagorean fuzzy VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method, is identical to the proposed approach results. The essence of the VIKOR method is a compromise ideal: to find the relationship between the group utility values and the individual utility values. But due to the complex relationship between them, the ranks of each alternative are often difficult to determine, and there are certain drawbacks, making this method less robust.
The rank results derived by the proposed framework have some distinctions with those by the Pythagorean fuzzy TODIM method [62] and Pythagorean fuzzy ELECTRE I method [63]. The first reason is the different decision mechanisms. The Pythagorean fuzzy TODIM method and Pythagorean fuzzy ELECTRE I method ignore the priority of criteria; they give inaccurate results in complex situations. The second reason is the diverse aggregation mechanisms. This paper uses the PFSSPA operator to aggregate the group evaluation information, and considers the interactions among risk preferences.
Moreover, to verify the effectiveness of the final results, Spearman’s rank correlation test is conducted to analyze the relationship between the rankings of the 16 compared methods. The results show that there are eight methods in which Spearman’s rank correlation is 1, and the average value is 0.65. These verify the strong reliability between the existing MADM method and the proposed model.
From the above discussion, compared with the existing MCDM method in the Pythagorean fuzzy environment, the proposed method has the following advantages:
-
1.
The model uses the membership and non-membership of the PFSs to express the fuzzy information of the experts. The vagueness of the original information will be maintained, which avoids information loss and distortion in the decision-making analysis process. As a result, the model can express and infer more about uncertain information.
-
2.
The PFSSPWA and PFSSPWG operators involving variable parameters are more flexible than other existing operators. Decision makers can choose appropriate parameters to reflect their risk preferences, and the ranking results have reliability.
-
3.
The proposed method in this article considers the relevance of the priorities between the criteria and avoids the influence of unknown weights on the decision-making results. Therefore, the concept of priority has an important role in our study.
-
4.
Our developed PFSSPA-MULTIMOORA incorporated the advantages of three subsystems, and the final results gathered using the improved Borda rule made the ranking results more in line with the actual situation.
5 Conclusion
This paper presents an extended fuzzy MULTIMOORA model based on the Pythagorean fuzzy sets and the Schweizer–Sklar t-norm and t-conorm for solving the site selection problem of CO2 geological storage. The proposed Pythagorean fuzzy MCDM model is composed of three main phases. First, the description and establishment of the problem involve the identification of criteria, alternatives, and experts. Second, determination of weights using decision matrix information and expert information aggregation using the proposed operator. Third, the PFSSPA-MULTIMOORA method is applied to rank the alternatives and select the optimal one. The main findings and achievements of this paper include the following five aspects: (1) The PFSs are used to express the complicated and uncertain evaluation data. The larger membership space of the PFS allows the proposed model to more effectively represent the decision information in the MCDM process. (2) Based on the Schweizer–Sklar t-norm and t-conorm, the PFSSPWA and PFSSPWG proposed in this paper contain adjustable parameters, and decision makers can choose appropriate parameters according to their own risk preferences. (3) Experts determine the different priority orders among criteria based on their own expertise and domain experience and use the PFSSPWA and PFSSPWG operators to aggravate the evaluation information among experts, which solves the MCDM problem of completely unknown criterion weights. (4) Three aggregation models (PF-RS, PF-RP, and PF-FMF) with different functions are utilized to handle the decision matrix and make full use of both aggregation operators and distance measurement. As a result, the proposed method can provide advanced decision support for researchers and practitioners. (5) The proposed method can be a useful tool for nations and regions choosing CO2 geological storage sites and dealing with other low-carbon technological issues. CO2 geological storage is the core component of CCUS technology, and the establishment of a decision model applicable to CO2 storage location selection determines the development potential and direction of CCUS technology.
Although the proposed model has the above-mentioned advantages, there are some limitations that could be discussed, the main focus is on the size of the criteria system, computational complexity, expert consensus, etc. First, considering the limitation of space and the complexity of the calculation, only five representative criteria are incorporated in this study. Second, the proposed method's complex calculations limit its use in some practical problems. Third, the proposed model does not take into consideration the achievement of expert consensus.
To address the above research limitations, the following areas of study might be explored in future work. (1) Future research should take into account more criteria to improve the decision-making technologies. (2) Designing a software tool to reduce the computational burden is a desirable route for future studies. (3) In real life, decision makers may offer varying judgments and evaluation information due to their varied backgrounds in education and experience. Therefore, the adjustment of expert opinions and the reach of expert consensus will be discussed in the further study.
Availability of Data and Materials
The manuscript contains all of the datasets that were used or analyzed for the current study.
Abbreviations
- CCUS:
-
Carbon capture, utilization, and storage
- MCDM:
-
Multi-criteria decision-making
- MULTIMOORA:
-
Multi-objective optimization by ratio analysis plus the full multiplicative form
- PFSSPA:
-
Pythagorean fuzzy Schweizer–Sklar prioritized aggregation
- PFSSPA-MULTIMOORA:
-
Multi-objective optimization by ratio analysis plus the full multiplicative form method based on Pythagorean fuzzy Schweizer–Sklar prioritized aggregation operators
- CO2 :
-
Carbon dioxide
- PFSs:
-
Pythagorean fuzzy sets
- PA:
-
Prioritized average
- PFPOWA:
-
Pythagorean fuzzy power ordered weighted average
- PFPOWG:
-
Pythagorean fuzzy power ordered weighted geometric
- PFLMM:
-
Pythagorean fuzzy linguistic Muirhead mean
- PFWBM:
-
Pythagorean fuzzy weighted Bonferroni mean
- PFWGBM:
-
Pythagorean fuzzy weighted geometric Bonferroni mean
- PFSSPWA:
-
Pythagorean fuzzy Schweizer–Sklar prioritized weighted average
- PFSSPWG:
-
Pythagorean fuzzy Schweizer–Sklar prioritized weighted geometric
- PFNs:
-
Pythagorean fuzzy number
- PF-RS:
-
Pythagorean fuzzy ratio system
- PF-RP:
-
Pythagorean fuzzy reference point
- PF-FMF:
-
Pythagorean fuzzy full multiplicative form
- PFDWA:
-
Pythagorean fuzzy Dombi weighted average
- PFDWG:
-
Pythagorean fuzzy Dombi weighted geometric
- PFIWA:
-
Pythagorean fuzzy interaction weighted average
- PFIWG:
-
Pythagorean fuzzy interaction weighted geometric
- PFEWA:
-
Pythagorean fuzzy Einstein weighted average
- PFEOWA:
-
Pythagorean fuzzy Einstein ordered weighted average
- TOPSIS:
-
Technique for order preference by similarity to an ideal solution
- CODAS:
-
Combinative distance-based assessment
- VIKOR:
-
VlseKriterijumska Optimizacija I Kompromisno Resenje
References
Mac Dowell, N., Fennell, P.S., Shah, N., Maitland, G.C.: The role of CO2 capture and utilization in mitigating climate change. Nat. Clim. Change. 7, 243–249 (2017). https://doi.org/10.1038/nclimate3231
Nocito, F., Dibenedetto, A.: Atmospheric CO2 mitigation technologies: carbon capture utilization and storage. Curr. Opin. Green Sustain. Chem. 21, 34–43 (2020). https://doi.org/10.1016/j.cogsc.2019.10.002
Wei, Y., Kang, J., Liu, L., Li, Q., Wang, P., Hou, J., Liang, Q., Liao, H., Huang, S., Yu, B.: A proposed global layout of carbon capture and storage in line with a 2 °C climate target. Nat. Clim. Change. 11, 112–118 (2021). https://doi.org/10.1038/s41558-020-00960-0
Bachu, S.: CO2 storage in geological media: Role, means, status and barriers to deployment. Prog. Energy Combust. Sci. 34, 254–273 (2008). https://doi.org/10.1016/j.pecs.2007.10.001
Guo, J., Yin, J., Zhang, L., Lin, Z.: Extended TODIM method for CCUS storage site selection under probabilistic hesitant fuzzy environment. Appl. Soft Comput. 93, 106381 (2020). https://doi.org/10.1016/j.asoc.2020.106381
Zadeh, L.A.: Fuzzy sets. Inf. Control. 8, 338–353 (1965). https://doi.org/10.1016/S0019-9958(65)90241-X
Atanassov, K.T.: Intuitionistic fuzzy sets. Fuzzy Sets Syst. 20, 87–96 (1986). https://doi.org/10.1016/S0165-0114(86)80034-3
Torra, V., Narukawa, Y.: On hesitant fuzzy sets and decision. In: 2009 IEEE International Conference on Fuzzy Systems. pp. 1378–1382. IEEE, Jeju Island, South Korea (2009). https://doi.org/10.1109/FUZZY.2009.5276884.
Yager, R.R.: Pythagorean fuzzy subsets. In: 2013 Joint IFSA World Congress and NAFIPS Annual Meeting (IFSA/NAFIPS). pp. 57–61. IEEE, Edmonton, AB, Canada (2013). https://doi.org/10.1109/IFSA-NAFIPS.2013.6608375.
Paul, T., Pal, M., Jana, C.: Portfolio selection as a multicriteria group decision making in Pythagorean fuzzy environment with GRA and FAHP framework. Int. J. Intell. Syst. (2021). https://doi.org/10.1002/int.22635
Hsu, C.-W., Chen, L.-T., Hu, A.H., Chang, Y.-M.: Site selection for carbon dioxide geological storage using analytic network process. Sep. Purif. Technol. 94, 146–153 (2012). https://doi.org/10.1016/j.seppur.2011.08.019
Deveci, M., Demirel, N.Ç., John, R., Özcan, E.: Fuzzy multi-criteria decision making for carbon dioxide geological storage in Turkey. J. Nat. Gas Sci. Eng. 27, 692–705 (2015). https://doi.org/10.1016/j.jngse.2015.09.004
Derse, O.: CO2 capture, utilization, and storage (CCUS) storage site selection using DEMATEL-based Grey Relational Analysis and evaluation of carbon emissions with the ARIMA method. Environ. Sci. Pollut. Res. (2022). https://doi.org/10.1007/s11356-022-23108-3
Paul, T.K., Jana, C., Pal, M., Simic, V.: Sustainable carbon-dioxide storage assessment in geological media using modified Pythagorean fuzzy VIKOR and DEMATEL approach. Int. J. Hydrog. Energy. (2022). https://doi.org/10.1016/j.ijhydene.2022.12.024
Brauers, W.K.M., Zavadskas, E.K.: Multimoora optimization used to decide on a bank loan to buy property. Technol. Econ. Dev. Econ. 17, 174–188 (2011). https://doi.org/10.3846/13928619.2011.560632
Wu, X., Liao, H., Xu, Z., Hafezalkotob, A., Herrera, F.: Probabilistic linguistic MULTIMOORA: a multicriteria decision making method based on the probabilistic linguistic expectation function and the improved Borda rule. IEEE Trans. Fuzzy Syst. 26, 3688–3702 (2018). https://doi.org/10.1109/TFUZZ.2018.2843330
Liang, D., Darko, A.P., Zeng, J.: Interval-valued pythagorean fuzzy power average-based MULTIMOORA method for multi-criteria decision-making. J. Exp. Theor. Artif. Intell. 32, 845–874 (2020). https://doi.org/10.1080/0952813X.2019.1694589
Tian, C., Peng, J., Long, Q., Wang, J., Goh, M.: Extended picture fuzzy MULTIMOORA method based on prospect theory for medical institution selection. Cogn. Comput. (2022). https://doi.org/10.1007/s12559-022-10006-6
Shang, Z., Yang, X., Barnes, D., Wu, C.: Supplier selection in sustainable supply chains: Using the integrated BWM, fuzzy Shannon entropy, and fuzzy MULTIMOORA methods. Expert Syst. Appl. 195, 116567 (2022). https://doi.org/10.1016/j.eswa.2022.116567
Liang, D., Linda, B.E., Wang, M., Xu, Z.: Hospital health-care delivery quality evaluation in Ghana: an integrated medical triangular fuzzy MULTIMOORA approach. Inf. Sci. 605, 99–118 (2022). https://doi.org/10.1016/j.ins.2022.05.031
He, J., Huang, Z., Mishra, A.R., Alrasheedi, M.: Developing a new framework for conceptualizing the emerging sustainable community-based tourism using an extended interval-valued Pythagorean fuzzy SWARA-MULTIMOORA. Technol. Forecast. Soc. Change. 171, 120955 (2021). https://doi.org/10.1016/j.techfore.2021.120955
Luo, S., Liu, J.: An innovative index system and HFFS-MULTIMOORA method based group decision-making framework for regional green development level evaluation. Expert Syst. Appl. 189, 116090 (2022). https://doi.org/10.1016/j.eswa.2021.116090
Chen, Y., Ran, Y., Huang, G., Xiao, L., Zhang, G.: A new integrated MCDM approach for improving QFD based on DEMATEL and extended MULTIMOORA under uncertainty environment. Appl. Soft Comput. 105, 107222 (2021). https://doi.org/10.1016/j.asoc.2021.107222
Qin, J., Ma, X.: An IT2FS-PT3 based emergency response plan evaluation with MULTIMOORA method in group decision making. Appl. Soft Comput. 122, 108812 (2022). https://doi.org/10.1016/j.asoc.2022.108812
Ma, Y., Zhao, Y., Wang, X., Feng, C., Zhou, X., Lev, B.: Integrated BWM-Entropy weighting and MULTIMOORA method with probabilistic linguistic information for the evaluation of Waste Recycling Apps. Appl. Intell. 53, 813–836 (2023). https://doi.org/10.1007/s10489-022-03377-8
Janani, K., Pradeepa Veerakumari, K., Vasanth, K., Rakkiyappan, R.: Complex Pythagorean fuzzy einstein aggregation operators in selecting the best breed of Horsegram. Expert Syst. Appl. 187, 115990 (2022). https://doi.org/10.1016/j.eswa.2021.115990
Paul, T.K., Pal, M., Jana, C.: Multi-attribute decision making method using advanced Pythagorean fuzzy weighted geometric operator and their applications for real estate company selection. Heliyon. 7, e07340 (2021). https://doi.org/10.1016/j.heliyon.2021.e07340
Yager, R.R.: Prioritized aggregation operators. Int. J. Approx. Reason. 48, 263–274 (2008). https://doi.org/10.1016/j.ijar.2007.08.009
Garg, H.: Sine trigonometric operational laws and its based Pythagorean fuzzy aggregation operators for group decision-making process. Artif. Intell. Rev. 54, 4421–4447 (2021). https://doi.org/10.1007/s10462-021-10002-6
Palanikumar, M.D., Arulmozhi, K., Jana, C.: Multiple attribute decision-making approach for Pythagorean neutrosophic normal interval-valued fuzzy aggregation operators. Comput. Appl. Math. (2022). https://doi.org/10.1007/s40314-022-01791-9
Wei, G., Lu, M.: Pythagorean fuzzy power aggregation operators in multiple attribute decision making. Int. J. Intell. Syst. 33, 169–186 (2018). https://doi.org/10.1002/int.21946
Liu, Y., Liu, J., Qin, Y.: Pythagorean fuzzy linguistic Muirhead mean operators and their applications to multiattribute decision-making. Int. J. Intell. Syst. 35, 300–332 (2020). https://doi.org/10.1002/int.22212
Yang, Y., Chin, K., Ding, H., Lv, H., Li, Y.: Pythagorean fuzzy Bonferroni means based on T-norm and its dual T-conorm. Int. J. Intell. Syst. 34, 1303–1336 (2019). https://doi.org/10.1002/int.22097
Li, Z., Wei, G.: Pythagorean fuzzy heronian mean operators in multiple attribute decision making and their application to supplier selection. Int. J. Knowl.-Based Intell. Eng. Syst. 23, 77–91 (2019). https://doi.org/10.3233/KES-190401
Xing, Y., Zhang, R., Wang, J., Zhu, X.: Some new Pythagorean fuzzy Choquet-Frank aggregation operators for multi-attribute decision making. Int. J. Intell. Syst. 33, 2189–2215 (2018). https://doi.org/10.1002/int.22025
Jana, C., Garg, H., Pal, M.: Multi-attribute decision making for power Dombi operators under Pythagorean fuzzy information with MABAC method. J. Ambient Intell. Humaniz. Comput. (2022). https://doi.org/10.1007/s12652-022-04348-0
Khan, M.S.A., Abdullah, S., Ali, A., Amin, F.: Pythagorean fuzzy prioritized aggregation operators and their application to multi-attribute group decision making. Granul. Comput. 4, 249–263 (2019). https://doi.org/10.1007/s41066-018-0093-6
Gao, H.: Pythagorean fuzzy Hamacher Prioritized aggregation operators in multiple attribute decision making. J. Intell. Fuzzy Syst. 35, 2229–2245 (2018). https://doi.org/10.3233/JIFS-172262
Jana, C., Muhiuddin, G., Pal, M.: Some Dombi aggregation of Q-rung orthopair fuzzy numbers in multiple attribute decision-making. Int. J. Intell. Syst. 34, 3220–3240 (2019). https://doi.org/10.1002/int.22191
Deschrijver, G., Kerre, E.E.: A generalisation of operators on intuitionistic fuzzy sets using triangular norms and conorms. Notes Instuitionistic Fuzzy Sets. 8, 19–27 (2002)
Biswas, A., Deb, N.: Pythagorean fuzzy Schweizer and Sklar power aggregation operators for solving multi-attribute decision-making problems. Granul. Comput. 6, 991–1007 (2021). https://doi.org/10.1007/s41066-020-00243-1
Liu, P., Gao, H., Fujita, H.: The new extension of the MULTIMOORA method for sustainable supplier selection with intuitionistic linguistic rough numbers. Appl. Soft Comput. 99, 106893 (2021). https://doi.org/10.1016/j.asoc.2020.106893
Rani, P., Mishra, A.R.: Fermatean fuzzy Einstein aggregation operators-based MULTIMOORA method for electric vehicle charging station selection. Expert Syst. Appl. 182, 115267 (2021). https://doi.org/10.1016/j.eswa.2021.115267
Irvanizam, I., Zulfan, Z., Nasir, P.F., Marzuki, M., Rusdiana, S., Salwa, N.: An extended MULTIMOORA based on trapezoidal fuzzy neutrosophic sets and objective weighting method in group decision-making. IEEE Access. 10, 47476–47498 (2022). https://doi.org/10.1109/ACCESS.2022.3170565
Dahooie, J.H., Zavadskas, E.K., Firoozfar, H.R., Vanaki, A.S., Mohammadi, N., Brauers, W.K.M.: An improved fuzzy MULTIMOORA approach for multi-criteria decision making based on objective weighting method (CCSD) and its application to technological forecasting method selection. Eng. Appl. Artif. Intell. 79, 114–128 (2019). https://doi.org/10.1016/j.engappai.2018.12.008
Alkan, Ö., Albayrak, Ö.K.: Ranking of renewable energy sources for regions in Turkey by fuzzy entropy based fuzzy COPRAS and fuzzy MULTIMOORA. Renew. Energy. 162, 712–726 (2020). https://doi.org/10.1016/j.renene.2020.08.062
Chen, Y., Ran, Y., Wang, Z., Li, X., Yang, X., Zhang, G.: An extended MULTIMOORA method based on OWGA operator and Choquet integral for risk prioritization identification of failure modes. Eng. Appl. Artif. Intell. 91, 103605 (2020). https://doi.org/10.1016/j.engappai.2020.103605
Saraji, M.K., Mardani, A., Köppen, M., Mishra, A.R., Rani, P.: An extended hesitant fuzzy set using SWARA-MULTIMOORA approach to adapt online education for the control of the pandemic spread of COVID-19 in higher education institutions. Artif. Intell. Rev. 55, 181–206 (2022). https://doi.org/10.1007/s10462-021-10029-9
Aviso, K.B., Janairo, J.I.B., Promentilla, M.A.B., Tan, R.R.: Prediction of CO2 storage site integrity with rough set-based machine learning. Clean Technol. Environ. Policy. 21, 1655–1664 (2019). https://doi.org/10.1007/s10098-019-01732-x
Raza, A., Rezaee, R., Gholami, R., Bing, C.H., Nagarajan, R., Hamid, M.A.: A screening criterion for selection of suitable CO2 storage sites. J. Nat. Gas Sci. Eng. 28, 317–327 (2016). https://doi.org/10.1016/j.jngse.2015.11.053
Lu, P., Hao, Y., Bai, Y., Liu, W., Chen, X., Zheng, H., Liu, J., Chen, Y., Gao, J.-P.: Optimal selection of favorable areas for CO2 geological storage in the Majiagou Formation in the Ordos Basin. Int. J. Greenh. Gas Control. 109, 103360 (2021). https://doi.org/10.1016/j.ijggc.2021.103360
Mi, Z., Wang, F., Yang, Y., Wang, F., Hu, T., Tian, H.: Evaluation of the potentiality and suitability for CO2 geological storage in the Junggar Basin, northwestern China. Int. J. Greenh. Gas Control. 78, 62–72 (2018). https://doi.org/10.1016/j.ijggc.2018.07.024
Yager, R.R.: Pythagorean membership grades in multicriteria decision making. IEEE Trans. Fuzzy Syst. 22, 958–965 (2014). https://doi.org/10.1109/TFUZZ.2013.2278989
Yager, R.R., Abbasov, A.M.: Pythagorean membership grades, complex numbers, and decision making. Int. J. Intell. Syst. 28, 436–452 (2013). https://doi.org/10.1002/int.21584
Zhang, X., Xu, Z.: Extension of TOPSIS to multiple criteria decision making with Pythagorean fuzzy sets. Int. J. Intell. Syst. 29, 1061–1078 (2014). https://doi.org/10.1002/int.21676
Aminu, M.D., Nabavi, S.A., Rochelle, C.A., Manovic, V.: A review of developments in carbon dioxide storage. Appl. Energy. 208, 1389–1419 (2017). https://doi.org/10.1016/j.apenergy.2017.09.015
Jana, C., Senapati, T., Pal, M.: Pythagorean fuzzy Dombi aggregation operators and its applications in multiple attribute decision-making. Int. J. Intell. Syst. 34, 2019–2038 (2019). https://doi.org/10.1002/int.22125
Wei, G.: Pythagorean fuzzy interaction aggregation operators and their application to multiple attribute decision making. J. Intell. Fuzzy Syst. 33, 2119–2132 (2017). https://doi.org/10.3233/JIFS-162030
Garg, H.: A new generalized Pythagorean fuzzy information aggregation using Einstein operations and its application to decision making. Int. J. Intell. Syst. 31, 886–920 (2016). https://doi.org/10.1002/int.21809
Peng, X., Ma, X.: Pythagorean fuzzy multi-criteria decision making method based on CODAS with new score function. J. Intell. Fuzzy Syst. 38, 3307–3318 (2020). https://doi.org/10.3233/JIFS-190043
Gul, M., Ak, M.F., Guneri, A.F.: Pythagorean fuzzy VIKOR-based approach for safety risk assessment in mine industry. J. Safety Res. 69, 135–153 (2019). https://doi.org/10.1016/j.jsr.2019.03.005
Ren, P., Xu, Z., Gou, X.: Pythagorean fuzzy TODIM approach to multi-criteria decision making. Appl. Soft Comput. 42, 246–259 (2016). https://doi.org/10.1016/j.asoc.2015.12.020
Akram, M., Ilyas, F., Garg, H.: Multi-criteria group decision making based on ELECTRE I method in Pythagorean fuzzy information. Soft Comput. 24, 3425–3453 (2020). https://doi.org/10.1007/s00500-019-04105-0
Acknowledgements
The authors are grateful to the editor and the anonymous reviewers for their constructive comments.
Funding
This research was funded by the Natural Science Foundation of China under Grant nos. 72271149 and 71704111, and the Ministry of Education and Humanities Social Sciences Research Youth Fund Project under Grant no. 22YJCZH231.
Author information
Authors and Affiliations
Contributions
YY proposed the methodology and wrote initial manuscript; CZ reviewed the results and produced the final manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare no conflicts of interest.
Ethical Approval and Consent to Participate
This article does not contain any studies with human participants or animals performed by any of the authors.
Consent for Publication
Written informed consent for publication was obtained from all participants.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yang, Y., Zhang, C. MULTIMOORA Method-Based Schweizer–Sklar Operations for CO2 Geological Storage Site Selection Under Pythagorean Fuzzy Environment. Int J Comput Intell Syst 16, 27 (2023). https://doi.org/10.1007/s44196-023-00201-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s44196-023-00201-0