Avoid common mistakes on your manuscript.
Correction to: Electrochemical Energy Reviews (2024) 7:12 https://doi.org/10.1007/s41918-024-00212-1
The publication of this article unfortunately contained mistakes. Figure 3 was not correct. The corrected figure is given below.
Incorrect figure
Correct figure
Copyright © 2015, Elsevier
Interfaces between the Li anode and SEs can be categorized into three key types: a thermodynamically stable interface; b mixed ionic and electronic conducting (MIEC) interphase; c metastable solid-electrolyte interphase (M–SEI). Reprinted with permission from Ref. [72].
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Jia, L., Zhu, J., Zhang, X. et al. Publisher Correction: Li–Solid Electrolyte Interfaces/Interphases in All-Solid-State Li Batteries. Electrochem. Energy Rev. 7, 20 (2024). https://doi.org/10.1007/s41918-024-00225-w
Published:
DOI: https://doi.org/10.1007/s41918-024-00225-w