Abstract
The demands for fiber-reinforced polymer material (FRPM) have rapidly grown over the years. Nevertheless, it has many hurdles in enhancing electrical properties. The electrical properties of the FRPM have been extensively investigated by researchers for various reinforcement, matrix, coating, and chemical treatments. However, the past surveys fail to elaborate on different electrical property measurements and the behavior of various FRPMs. So, the current study aims to critically review the FRPM fabrication methods, measuring techniques, and electrical performances. The electrical performance indexes are assessed by the dielectric constant (permittivity), dissipation factor, dielectric loss factor, electrical resistivity/ conductivity, and EMI shielding effectiveness (absorption, reflection, and multiple reflections). Also, this study compiles the effect of performance influencing factors such as fiber loading, matrix type, chemical treatment, size/loading filler, and coating. Finally, the study indicates the pathway and directions for sustainable fiber-reinforced polymer sensor development for textile, agriculture, and biomedical applications.
Similar content being viewed by others
References
Khalid M Y, Al Rashid A, Arif Z U, Ahmed W, Arshad H, and Zaidi A A, Results in Engineering 11 (2021) 100263. https://doi.org/10.1016/j.rineng.2021.100263
Krishnasamy P, Rajamurugan G, Muralidharan B, and Krishnaiah R, Engineering Research Express 4 (2022) 012002. https://doi.org/10.1088/2631-8695/ac49d7
Sreekumar P A, Saiter J M, Joseph K, Unnikrishnan G, and Thomas S, Composites Part A: Applied Science and Manufacturing 43 (2012) 507. https://doi.org/10.1016/j.compositesa.2011.11.018
Singha A S, Rana A K, and Jarial R K, Materials and Design 51 (2013) 924. https://doi.org/10.1016/j.matdes.2013.04.035
Kaftelen-Odabaşı H, Odabaşı A, Özdemir M, and Baydoğan M, Polymer Composites (2022). https://doi.org/10.1002/pc.27031
Gao X, Yang W, Tan J, Song L, Cheng L, and Tian X, Polymer Composites 43 (2022) 2796. https://doi.org/10.1002/pc.26576
Al-Furjan M S H, Shan L, Shen X, Zarei M S, Hajmohammad M H, and Kolahchi R, Journal of Materials Research and Technology (2022). https://doi.org/10.1016/j.jmrt.2022.06.008
Paul A, Joseph K, and Thomas S, Composites Science and Technology 57 (1997) 67. https://doi.org/10.1016/S0266-3538(96)00109-1
Thangamani J, and Krishnasamy P, Transactions of the Indian Institute of Metals (2022). https://doi.org/10.1007/s12666-022-02729-9
Jayamani E, Hamdan S, Rahman M R, and Bakri M K B, Procedia Engineering 97 (2014) 536. https://doi.org/10.1016/j.proeng.2014.12.280
Hwang S S, Composites Part B: Engineering 98 (2016) 1–8. https://doi.org/10.1016/j.compositesb.2016.05.028
He D, Salem D, Cinquin J, Piau G P, and Bai J, Composites Science and Technology 147 (2017) 107. https://doi.org/10.1016/j.compscitech.2017.05.012
Xia C, Yu J, Shi S Q, Qiu Y, Cai L, Wu H F, Ren H, Nie X, and Zhang H, Composites Part B: Engineering 114 (2017) 121–127. https://doi.org/10.1016/j.compositesb.2017.01.044
Fraga A N, Frullloni E, De La Osa O, Kenny J M, and Vázquez A, Polymer Testing 25 (2006) 181. https://doi.org/10.1016/j.polymertesting.2005.11.002
Jayamani E, Materials Today: Proceedings 46 (2021) 8887. https://doi.org/10.1016/j.matpr.2021.05.606
Jayamani E, Nair G A, and Soon K H, Materials Today: Proceedings 22 (2020) 162. https://doi.org/10.1016/j.matpr.2019.08.032
Zhang Q, Ning L, Shen Y, Wang M, Wang C, and Yan Y, Materials Letters 268 (2020) 127578. https://doi.org/10.1016/j.matlet.2020.127578
Camacho D E, and Encinas A, Materials Letters 300 (2021) 130204. https://doi.org/10.1016/j.matlet.2021.130204
Souri H, and Bhattacharyya D, Materials and Design 154 (2018) 217. https://doi.org/10.1016/j.matdes.2018.05.040
Ehsanimehr S, Sonnier R, Najafi P, Ducos F, Badawi M, Formela K, Saeb M R, and Vahabi H, Reactive and Functional Polymers 173 (2022) 105221. https://doi.org/10.1016/j.reactfunctpolym.2022.105221
Katouah H, and El-Metwaly N M, Reactive and Functional Polymers 159 (2021) 104810. https://doi.org/10.1016/j.reactfunctpolym.2021.104810
Ilyas S, Sultana I, Nasar R, Hanif I, Jafri S H M, Naveed-Ul- Haq M, and Razaq A, Ceramics International 47 (2021) 29435. https://doi.org/10.1016/j.ceramint.2021.07.111
Xu Y, Ndayikengurukiye J, Akono A T, and Guo P, Manufacturing Letters 31 (2022) 91. https://doi.org/10.1016/j.mfglet.2021.07.017
Huang H D, Guo Z, Yang P Y, Chen P, and Wu J, Chemical Physics Letters 771 (2021) 138551. https://doi.org/10.1016/j.cplett.2021.138551
Lee P C, Kim B R, Jeoung S K, and Kim Y K, AIP Conference Proceedings (2016). https://doi.org/10.1063/1.4942330
Mohd Radzuan N A, Yusuf Zakaria M, Sulong A B, and Sahari J, Composites Part B: Engineering 110 (2017) 153. https://doi.org/10.1016/j.compositesb.2016.11.021
Routray W, and Orsat V, Current Opinion in Food Science 23 (2018) 120. https://doi.org/10.1016/j.cofs.2018.10.001
Kisiel A, Konieczny M, and Zabska M, IOP Conference Series: Materials Science and Engineering (2016). https://doi.org/10.1088/1757-899X/113/1/012002
Unterweger C, Mayrhofer T, Piana F, Duchoslav J, Stifter D, Poitzsch C, and Fürst C, Composites Science and Technology 188 (2020) 107998. https://doi.org/10.1016/j.compscitech.2020.107998
Nayab-Ul-Hossain A K M, Sela S K, Hassan M N, and Sarkar A, Materials Letters: X 5 (2020) 100036. https://doi.org/10.1016/j.mlblux.2019.100036
Liu S, Qin S, Jiang Y, Song P, and Wang H, Composites Part A: Applied Science and Manufacturing 145 (2021) 106376. https://doi.org/10.1016/j.compositesa.2021.106376
George G, Joseph K, Nagarajan E R, Tomlal Jose E, and George K C, Composites Part A: Applied Science and Manufacturing 47 (2013) 12. https://doi.org/10.1016/j.compositesa.2012.11.009
Mehta N M, and Parsania P H, Journal of Applied Polymer Science 100 (2006) 1754. https://doi.org/10.1002/app.23014
Al-Oqla F M, Sapuan S M, Anwer T, Jawaid M, and Hoque M E, Synthetic Metals 206 (2015) 42–54. https://doi.org/10.1016/j.synthmet.2015.04.014
Tomlal E J, Thomas P C, George K C, Jayanarayanan K, and Joseph K, Journal of Reinforced Plastics and Composites 29 (2010) 1861. https://doi.org/10.1177/0731684409338748
Joseph S, and Thomas S, Journal of Applied Polymer Science 109 (2008) 256. https://doi.org/10.1002/app.27452
Sgriccia N, and Hawley M C, Composites Science and Technology 67 (2007) 1986. https://doi.org/10.1016/j.compscitech.2006.07.031
Ben Amor I, Arous M, and Kallel A, Effect of maleic anhydride on dielectric properties of natural fiber composite. Journal of Electrostatics 72 (2014) 156–160. https://doi.org/10.1016/j.elstat.2013.12.006
Jayamani E, Hamdan S, Rahman M R, and Bakri M K B, Materials Today: Proceedings 2 (2015) 2757–2766. https://doi.org/10.1016/j.matpr.2015.07.269
Khan A, Ayaz Ahmad M, and Joshi S, International Journal of Science and Research IJSR ISSN Online Index Copernicus Value Impact Factor 14 (2013) 2319–7064.
Haseena A P, Unnikrishnan G, and Kalaprasad G, Composite Interfaces 14 (2007) 763–786. https://doi.org/10.1163/156855407782106582
Sridhar M, Vasudeva Setty R N, and Johns J, Journal of Natural Fibers 00 (2021) 1–12. https://doi.org/10.1080/15440478.2021.1875354
Heaney M B, Electrical measurement, signal processing, and displayS, CRC Press (2004), pp 1–14.
Zhang S, Hao A, Nguyen N, Oluwalowo A, Liu Z, Dessureault Y, Park J G, and Liang R, Carbon 144 (2019) 628. https://doi.org/10.1016/j.carbon.2018.12.091
Quan D, Mischo C, Li X, Scarselli G, Ivanković A, and Murphy N, Composites Science and Technology 182 (2019) 107775. https://doi.org/10.1016/j.compscitech.2019.107775
Singh Y, International Journal of Modern Physics: Conference Series 22 (2013) 745–756. https://doi.org/10.1142/s2010194513010970
Hanif M P M, Rozyanty A R, Kahar A W M, Tan S J, and Supri A G, Materials Today: Proceedings 16 (2019) 2016–2022. https://doi.org/10.1016/j.matpr.2019.06.086
Yamada Y, Textiles 2 (2022) 50–80. https://doi.org/10.3390/textiles2010004
Mikinka E, and Siwak M, Materials Today Communications 32 (2022) 104039. https://doi.org/10.1016/j.mtcomm.2022.104039
Klemperer C J V, and Maharaj D, Composite Structures 91 (2009) 467–472. https://doi.org/10.1016/j.compstruct.2009.04.013
Remadevi R, Al Faruque M A, Zhang J, and Naebe M, Materials Letters 264 (2020) 127311. https://doi.org/10.1016/j.matlet.2020.127311
Rana M, & Gmbh BF, Development of carbon nano-tubes on carbonized-cotton for multi-functional applications development of carbon nano-tubes on carbonized- cotton for multi-functional applications. (2017)
Xing D, Rana M, Hao B, Zheng Q, and Ma P, Electrochimica Acta 427 (2022) 140847. https://doi.org/10.1016/j.electacta.2022.140847
Pakdel E, Kashi S, Baum T, Usman K A S, Razal J M, Varley R, and Wang X, Journal of Cleaner Production 315 (2021) 128196. https://doi.org/10.1016/j.jclepro.2021.128196
Luo X, and Chung D D L, Composites Part B: Engineering 30 (1999) 227–231. https://doi.org/10.1016/S1359-8368(98)00065-1
Kil T, Jin D W, Yang B, and Lee H K, Composite Structures 268 (2021) 114002. https://doi.org/10.1016/j.compstruct.2021.114002
Ali A, Hussain F, Tahir M F, Ali M, Zaman Khan M, Tomková B, Militky J, Noman M T, and Azeem M, Polymers (2022). https://doi.org/10.3390/polym14071289
Guimarães C J B, De Aguiar A P, and De Castro A T, Polimeros 31 (2021) 1. https://doi.org/10.1590/0104-1428.08720
Thomassin J M, Jérôme C, Pardoen T, Bailly C, Huynen I, and Detrembleur C, Materials Science and Engineering R: Reports 74 (2013) 211–232. https://doi.org/10.1016/j.mser.2013.06.001
Chung D D L, Materials Chemistry and Physics 255 (2020) 123587. https://doi.org/10.1016/j.matchemphys.2020.123587
Martins L C, and Pontes A J, Journal of Reinforced Plastics and Composites 41 (2022) 206. https://doi.org/10.1177/07316844211051732
Shahapurkar K, Gelaw M, Tirth V, Soudagar M E M, Shahapurkar P, Mujtaba M, Kiran M C, and Ahmed G M S, Polymers and Polymer Composites 30 (2022) 096739112211021. https://doi.org/10.1177/09673911221102127
Subramanian J, Vinoth Kumar S, Venkatachalam G, Gupta M, and Singh R, Journal of Electronic Materials 50 (2021) 1282. https://doi.org/10.1007/s11664-020-08622-9
Jagadeesh Chandra R B, Shivamurthy B, Kulkarni S D, and Kumar M S, Materials Research Express (2019). https://doi.org/10.1088/2053-1591/aaff00
Park S H, and Ha J H, Materials (2019). https://doi.org/10.3390/ma12091395
Chithra A, Wilson P, Vijayan S, Rajeev R, and Prabhakaran K, Journal of Materials Science and Technology 94 (2021) 113–122. https://doi.org/10.1016/j.jmst.2021.02.064
Xia C, Ren H, Shi S Q, Zhang H, Cheng J, Cai L, Chen K, and Tan H S, Applied Surface Science 362 (2016) 335. https://doi.org/10.1016/j.apsusc.2015.11.202
Khan M A, and Khan R A, Journal of Reinforced Plastics and Composites 28 (2009) 1651–1660. https://doi.org/10.1177/0731684408090365
Neher B, Rahman Bhuiyan M M, Gafur M A, Kabir H, Hoque M A, Bashar M S, Ahmed F, and Hossain M A, Journal of Reinforced Plastics and Composites 34 (2015) 1253. https://doi.org/10.1177/0731684415591067
Wentzel D, and Sevostianov I, International Journal of Engineering Science 130 (2018) 129. https://doi.org/10.1016/j.ijengsci.2018.05.012
Han B, Guo E, Xue X, Zhao Z, Li T, Xu Y, Luo L, and Hou H, Applied Surface Science 441 (2018) 984. https://doi.org/10.1016/j.apsusc.2018.02.078
Mylsamy G, and Krishnasamy P, Journal of Natural Fibers (2022). https://doi.org/10.1080/15440478.2022.2075517
Li L, Liu W, Hu T, and Sun L, Polymer Composites 43 (2022) 4382. https://doi.org/10.1002/pc.26699
Haghgoo M, Ansari R, and Hassanzadeh-Aghdam M K, Composites Part B: Engineering 167 (2019) 728. https://doi.org/10.1016/j.compositesb.2019.03.046
Wang Q, Xiao S, Shi S Q, Xu S, and Cai L, Applied Surface Science 475 (2019) 947. https://doi.org/10.1016/j.apsusc.2019.01.059
Barathan V, and Rajamohan V, Mechanics of Advanced Materials and Structures (2022). https://doi.org/10.1080/15376494.2022.2114049
Singh V K, Hirwani C K, Panda S K, Mahapatra T R, and Mehar K, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (2019) 1601. https://doi.org/10.1177/0954406218774362
Singh V K, Mahapatra T R, and Panda S K, European Journal of Mechanics, A/Solids 60 (2016) 300. https://doi.org/10.1016/j.euromechsol.2016.08.006
Singh V K, Singh J, Venkata Rao K, Singh N K, Saran C, Paswan M, Panda S K, and Chaudhary V, Composite Structures 260 (2021) 113504. https://doi.org/10.1016/j.compstruct.2020.113504
Singh V K, Mahapatra T R, and Panda S K, Composite Structures 157 (2016) 121. https://doi.org/10.1016/j.compstruct.2016.08.020
Singh V K, and Panda S K, Smart Structures and Systems 16 (2015) 853. https://doi.org/10.12989/sss.2015.16.5.853
Dutta G, Panda S K, Mahapatra T R, and Singh V K, International Journal of Applied and Computational Mathematics 3 (2017) 2573. https://doi.org/10.1007/s40819-016-0256-6
Chadha A, Sudhagar P E, Gunasegeran M, and Veerappa V S, International Journal of Structural Stability and Dynamics (2022). https://doi.org/10.1142/S0219455423501201
Kumar E K, Sharma N, Panda S K, and Mahmoud S R, Archive of Applied Mechanics 92 (2022) 3829. https://doi.org/10.1007/s00419-022-02265-4
Erukala K K, Mishra P K, Dewangan H C, Panda S K, and Dwivedi M, Acta Mechanica 233 (2022) 3133. https://doi.org/10.1007/s00707-022-03272-w
Kumar V, Kumar E K, Dewangan H C, Sharma N, Panda S K, and Mahmoud S R, Transactions of the Indian Institute of Metals (2022). https://doi.org/10.1007/s12666-022-02728-w
Kumar E K, Patel S S, Kumar V, Panda S K, Mahmoud S R, and Balubaid M, Archives of Computational Methods in Engineering (2022). https://doi.org/10.1007/s11831-022-09827-3
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
We would like to acknowledge authors don’t have any conflicts of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mylsamy, G., Krishnasamy, P. A Review on Electrical Properties of Fiber-Reinforced Polymer Material: Fabrication, Measurement, and Performances. Trans Indian Inst Met 76, 1691–1708 (2023). https://doi.org/10.1007/s12666-023-02888-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-023-02888-3