Abstract
Metallic biomaterials improve the life quality of the people. In particular, efforts to develop porous biomaterials are getting more attention recently. Among the metallic materials, titanium alloys are commonly preferred in biomedical application due to their excellent biocompatibility, high corrosion resistance and mechanical strength. Researches into porous titanium-based implant materials have resulted in several fabrication methods, with many others under development. In this study, powder metallurgical different processing techniques such as partial sintering of powders, replication, additive manufacturing, plasma spray coating, microwave sintering, space holder method, spark plasma sintering, metal injection molding were investigated. What are the requirements, problems and developments in this field? After considering these issues, we will discuss different conventional and technological processing methods, along with their effects on the structure and properties of implant materials.
Similar content being viewed by others
References
Ryan, G., Pandit, A., Apatsidis, D.P, Biomaterials 27(2006). https://doi.org/10.1016/j.biomaterials.2005.12.002
Yamanoglu, R., German, R.M., Karagoz, S., Bradbury, W.L., Zeren, M., Li, W., Olevsky, E.A, Powder Metall 54 (2013). https://doi.org/10.1179/1743290110y.0000000006
Yamanoglu, R., Efendi, E., Kolayli, F., Uzuner, H., Daoud, I, Biomed Mater 13 (2018). https://doi.org/10.1088/1748-605X/aa957d
Bahador, A., Umeda, J., Yamanoglu, R., Abu Bakar, T.A., Kondoh, K, Mater Sci Eng A (2020). https://doi.org/10.1016/j.msea.2020.140324
Guden, M., Celik, E., Akar, E., Cetiner, S, Mater Charact 54 (2005). https://doi.org/10.1016/j.matchar.2005.01.006
Sabree, I., Gough, J.E., Derby, B, Ceram Int 41 (2015). https://doi.org/10.1016/j.ceramint.2015.03.044
Karageorgiou, V., Kaplan, D, Biomaterials 26 (2005). https://doi.org/10.1016/j.biomaterials.2005.02.002
Loh, Q.L., Choong, C, Tissue Eng Part B Rev 19 (2013). https://doi.org/10.1089/ten.TEB.2012.0437
Rotta, G., Seramak, T., Zasińska, K, Adv Mater Sci 15 (2015). https://doi.org/10.1515/adms-2015-0020
Nagels, J., Stokdijk, M., Rozing, P.M, J Shoulder Elbow Surg 12 (2003).
Joshi, M.G., Advani, S.G., Miller, F., Santare, M.H, J Biomech 33 (2000).
Xiong, Y., Qian, C., Sun, J, Dent Mater J 31 (2012).https://doi.org/10.4012/dmj.2012-065
van Grunsven, W., Goodall, R., Reilly, G.C, J Biomech 45. https://doi.org/10.1016/s0021-9290(12)70340-8
Deng, S., Wang, Y., Zhuang, G., Zhong, X., Wei, Z., Yao, Z., Wang, J.G, Phys Chem Chem Phys 21 (2019). https://doi.org/10.1039/c9cp01582e
Pałka, K., Pokrowiecki, R, Adv Eng Mater 20 (2018). https://doi.org/10.1002/adem.201700648
Yamanoglu, R, Acta Metall Sin 28 (2015). https://doi.org/10.1007/s40195-015-0295-8
Yamanoglu, R., Bradbury, W., Olevsky, E.A., German, R.M, Met Mater Int 19 (2013). https://doi.org/10.1007/s12540-013-5015-1
German, R.M, Sintering: From Empirical Observations to Scientific Principles. Butterworth-Heinemann (2014).
Yamanoglu, R, Powder Metall Met Ceram 57 (2019). https://doi.org/10.1007/s11106-019-00010-1
Davies, G.J., Zen, S, J Mater Sci 18 (1983).
Ishizaki, K., Komarneni, S., Nanko, M, Porous Materials Process Technology and Applications. Springer Science & Business Media (1998).
Dunand, D.C, Adv Eng Mater 6 (2004). https://doi.org/10.1002/adem.200405576
Oh, I.-H., Segawa, H., Nomura, N., Hanada, S, Mater Trans 44 (2003).
Stanev, L., Kolev, M., Drenchev, B., Drenchev, L, J Manuf Sci Eng 139 (2017). https://doi.org/10.1115/1.4034439
Bram, M., Stiller, C., Buchkremer, H.P., Stöver, D., Baur, H, Adv Eng Mater 2 (2000).
Zhao, Y.Y., Sun, D.X, Scr Mater 44 (2001).
Wen, C.E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., Asahina, T, Scr Mater 45 (2001).
Sharma, M., Gupta, G.K., Modi, O.P., Prasad, B.K., Gupta, A.K, Mater Lett 65 (2011). https://doi.org/10.1016/j.matlet.2011.07.004
Niu, W., Bai, C., Qiu, G., Wang, Q, Mater Sci Eng A 506 (2009). https://doi.org/10.1016/j.msea.2008.11.022
Kim, S.W., Jung, H.D., Kang, M.H., Kim, H.E., Koh, Y.H., Estrin, Y, Mater Sci Eng C Mater Biol Appl 33 (2013). https://doi.org/10.1016/j.msec.2013.03.011
Clark, D.E., Sutton, W.H, Ann Rev Mater Sci 26 (1996).
Katz, J.D, Ann Rev Mater Sci 22 (1992).
R, R., M, P., H.G.A, R, Microwave Fast Sintering of Ceramic Materials (2012)
Oghbaei, M., Mirzaee, O, J Alloys Compd 494 (2010). https://doi.org/10.1016/j.jallcom.2010.01.068
Heuguet, R., Marinel, S., Thuault, A., Badev, A, J Am Ceram Soc 96 (2013).
Tang, C.Y., Wong, C.T., Zhang, L.N., Choy, M.T., Chow, T.W., Chan, K.C., Yue, T.M., Chen, Q, J Alloys Compd 557 (2013). https://doi.org/10.1016/j.jallcom.2012.12.147
Yu, P., Stephani, G., Luo, S.D., Goehler, H., Qian, M, Mater Lett 86 (2012). https://doi.org/10.1016/j.matlet.2012.07.022
Kutty, M.G., Bhaduri, S.B, J Mater Sci Mater Med 15 (2004).
Choy, M.-T., Tang, C.-Y., Chen, L., Law, W.-C., Tsui, C.-P., Lu, W.W, Compos Part B Eng 83 (2015). https://doi.org/10.1016/j.compositesb.2015.08.046
Kobashi, M., Kuze, K., Kanetake, N, Adv Eng Mater 8 (2006).https://doi.org/10.1002/adem.200600089
Ayers, R.A., Burkes, D.E., Gottoli, G., Yi, H.C., Zhim, F., Yahia, L., Moore, J.J, J Biomed Mater Res A 81 (2007). https://doi.org/10.1002/jbm.a.31017
Kobashi, M., Kanetake, N, Mater Sci Forum 539-543 (2007). https://doi.org/10.4028/www.scientific.net/MSF.539-543.1004
Kamynina, O.K., Gotman, I., Gutmanas, E., Sytschev, A.E., Vadchenko, S.G., Balikhina, E.N, Int J Self-Propag High-Temp Synth 18 (2009). https://doi.org/10.3103/s106138620902006x
Kim, J.S., Yang, S.G., Kang, J.H., Kang, S.B., Yoon, K.S., Kwon, Y.S, Mater Sci Forum 449-452 (2004). https://doi.org/10.4028/www.scientific.net/MSF.449-452.1097
Yamanoğlu, R., Bradbury, W.L., Olevsky, E.A., German, R.M, Adv Appl Ceram 111 (2013). https://doi.org/10.1179/1743676112y.0000000017
Du, H., Liu, X.W., Li, J., Tao, P., Jiang, J., Sun, R., Fan, Z.T, Mater Manuf Process 31 (2015). https://doi.org/10.1080/10426914.2015.1048469
Yamanoglu, R., Gulsoy, N., Olevsky, E.A., Gulsoy, H.O, J Alloys Compd 680 (2016). https://doi.org/10.1016/j.jallcom.2016.04.176
Hamidi, M., Harun, W.S.W., Samykano, M., Ghani, S.A.C., Ghazalli, Z., Ahmad, F., Sulong, A.B, Mater Sci Eng C Mater Biol Appl 78 (2017). https://doi.org/10.1016/j.msec.2017.05.016
Dehghan-Manshadi, A., Bermingham, M.J., Dargusch, M.S., StJohn, D.H., Qian, M, Powder Technol 319 (2017). https://doi.org/10.1016/j.powtec.2017.06.053
Gülsoy, H.Ö., German, R.M, Scr Mater 58 (2008). https://doi.org/10.1016/j.scriptamat.2007.10.004
Bhero, S, Int J Res Chem Metall Civ Eng 1 (2014).
Nishiyabu, K., Matsuzaki, S., Tanaka, S, Mater Sci Forum 534–536 (2007).
Engin, G., Aydemir, B., Gülsoy, H.Ö, Rare Metals 30 (2011). https://doi.org/10.1007/s12598-011-0430-2
Chen, L.-j., Li, T., Li, Y.-m., He, H., Hu, Y.-h, Trans Nonferrous Metals Soc China 19 (2009). https://doi.org/10.1016/s1003-6326(08)60424-0
Daudt, N.d.F., Bram, M., Barbosa, A.P.C., Laptev, A.M., Alves, C, J Mater Process Technol 239 (2017). https://doi.org/10.1016/j.jmatprotec.2016.08.022
Brunette, D.M., Tengvall, P., Thomsen, P, Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications. Springer (2012).
Wen, C, Surface Coating and Modification of Metallic Biomaterials. Woodhead Publishing (2015).
Smith, T, J Miner Metals Mater Soc 46 (1994).
Davis, J.R, Handbook of Thermal Spray Technology. ASM international (2004).
Jaeggi, C., Frauchiger, V., Eitel, F., Stiefel, M., Schmotzer, H., Siegmann, S, Acta Mater 59 (2011). https://doi.org/10.1016/j.actamat.2010.10.010
Kalita, V.I., Komlev, D.I., Radyuk, A.A, Inorg Mater Appl Res 7 (2016). https://doi.org/10.1134/s2075113316040146
Shahali, H., Jaggessar, A., Yarlagadda, P.K.D.V, Proc Eng 174 (2017). https://doi.org/10.1016/j.proeng.2017.01.259
Hedayati, R., Amin Yavari, S., Zadpoor, A.A, Mater Sci Eng C Mater Biol Appl 76 (2017). https://doi.org/10.1016/j.msec.2017.03.091
Melancon, D., Bagheri, Z.S., Johnston, R.B., Liu, L., Tanzer, M., Pasini, D, Acta Biomater 63 (2017). https://doi.org/10.1016/j.actbio.2017.09.013
Kim, T.B., Yue, S., Zhang, Z., Jones, E., Jones, J.R., Lee, P.D, J Mater Process Technol 214 (2014). https://doi.org/10.1016/j.jmatprotec.2014.05.006
Wiria, F.E., Maleksaeedi, S., He, Z, Prog Cryst Growth Charact Mater 60 (2014). https://doi.org/10.1016/j.pcrysgrow.2014.09.001
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., Matsuda, S, Mater Sci Eng C Mater Biol Appl 59 (2016). https://doi.org/10.1016/j.msec.2015.10.069
Tan, X.P., Tan, Y.J., Chow, C.S.L., Tor, S.B., Yeong, W.Y, Mater Sci Eng C Mater Biol Appl 76 (2017). https://doi.org/10.1016/j.msec.2017.02.094
Singh, R., Lee, P.D., Dashwood, R.J., Lindley, T.C, Mater Technol 25 (2013). https://doi.org/10.1179/175355510x12744412709403
Manonukul, A., Srikudvien, P., Tange, M, Mater Sci Eng A 650 (2016). https://doi.org/10.1016/j.msea.2015.10.074
Ho, N.S.K., Li, P., Raghavan, S., Li, T, Mater Sci Eng A 687 (2017). https://doi.org/10.1016/j.msea.2017.01.038
Wang, C., Chen, H., Zhu, X., Xiao, Z., Zhang, K., Zhang, X, Mater Sci Eng C Mater Biol Appl 70( (2017). https://doi.org/10.1016/j.msec.2016.03.037
Manonukul, A., Tange, M., Srikudvien, P., Denmud, N., Wattanapornphan, P, Powder Technol 266 (2014). https://doi.org/10.1016/j.powtec.2014.06.030
Netti, P, Biomedical Foams for Tissue Engineering Applications. Elsevier (2014).
Shbeh, M.M., Goodall, R, Adv Eng Mater 19 (2017). https://doi.org/10.1002/adem.201600664
Nouri, A., Hodgson, P.D., Wen, C.E, Biomimetic Porous Titanium Scaffolds for Orthopedic and Dental Applications. InTech (2010).
Prananingrum, W., Naito, Y., Galli, S., Bae, J., Sekine, K., Hamada, K., Tomotake, Y., Wennerberg, A., Jimbo, R., Ichikawa, T, Biomed Mater 11 (2016). https://doi.org/10.1088/1748-6041/11/1/015012
Bose, S., Bandyopadhvay, A., Narayan, R, Properties Appl III Ceram Trans 242 (2013).
He, G., Liu, P., Tan, Q., Jiang, G, J Mech Behav Biomed Mater 28 (2013). https://doi.org/10.1016/j.jmbbm.2013.08.016
Mallick, K, Bone Substitute Biomaterials. Woodhead publishing series in biomaterials, Elsevier 78 (2014).
Rahman, Z.U., Shabib, I., Haider, W, Mater Sci Eng C Mater Biol Appl 67 (2016). https://doi.org/10.1016/j.msec.2016.05.070
Sun, J., Han, Y., Cui, K, Mater Lett 62 (2008). https://doi.org/10.1016/j.matlet.2008.04.011
He, G., Liu, P., Tan, Q, J Mech Behav Biomed Mater (2012). https://doi.org/10.1016/j.jmbbm.2011.09.016
Xiao, Y., Xu, F., Hu, X., Li, Y., Liu, W., Dong, B, Metals 6 (2016). https://doi.org/10.3390/met6010009
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by the author.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Yamanoglu, R., Bahador, A. & Kondoh, K. Fabrication Methods of Porous Titanium Implants by Powder Metallurgy. Trans Indian Inst Met 74, 2555–2567 (2021). https://doi.org/10.1007/s12666-021-02332-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-021-02332-4