Abstract
Poly(urethane-imide-Ester)s PUIEs were prepared by the intermolecular Diels-Alder (DA) reaction of various urethane containing bisfurans (Ia–d) with bismaleimide (IIA,B) having diglycidyl ether of bisphenol-A and F (DGEBA and F) (epoxy) segment. The DA reaction was carried out in 1, 4-dioxane as a solvent, as well as in bulk, followed by aromatization of unaromatized PUIEs intermediates in the presence of acetic anhydride. All the polymers (PUIEs) were characterized by elemental analysis, IR spectral studies and thermogravimetry. The PUIEs exhibit moderate thermal stability. Bisfurans(Ia–d) and bismaleimide (IIA,B) were polymerized (at 145 ± 10 °C) by insitu DA intermolecular reaction into moderately thermally stable PUIEs—glass fiber composite laminates and were characterized by their chemical, mechanical and electrical properties.
Similar content being viewed by others
References
Tamami B, Abdolmaleki A (2004) Synthesis and characterization of new aromatic Poly(amide-imide)s derived from Bis(3-trimellitimidophenyl) phenyl phosphine oxide and various aromatic diamines. J Iran Chem Soc 1:141–151
Rozhanskii I, Okuyama K, Goto K (2000) Synthesis and properties of polyimides derived from isomeric biphenyltetracarboxylic dianhydrides. Polymer 41:7057–7065
Der-jang L, Been-yang L, Chia-Wei Y (2001) Synthesis and characterization of new organosoluble polyimides based on flexible diamine. Polymer 42:5175–5179
Tamami B, Yeganeh H (2001) Synthesis and characterization of novel aromatic polyamides derived from 4-aryl-2,6-bis(4-aminophenyl) pyridines. Polymer 42:415–420
Cassidy PE (1980) Thermally stable polymers: synthesis and properties. Marcel Dekker, New York, pp 1–393
Chandra R, Rajabi L (1997) Recent advances in bismaleimides and epoxy-lmide/ bismaleimide formulations and composites. J Macromol Sci, Part C: Polym Rev 1:61–96
Kricheldorf HR, Ken ON, Graham S (2005) In: Donald EH (ed) Hand book of polymer synthesis. Marcal Dekker, New York, pp 548–609
Lenz RW (1967) Organic chemistry of synthetic high polymers. Interscience, New york
Stille JK, Morgan RA (1967) A novel polyimide. 3:2397–2399
Patel HS, Patel HD (1992) Polyimides based on Poly(4-furanyl butan-2- one). High Perform Polym 4:19–34
Patel HS, Lad BD (1981) Polyimides based on Poly(2,5-furandiylmethylene)-I. Micromole Chem 190:2055–2061
Patel HS, Vyas HS, Lad BD (1990) Polyimides based on Poly(2,5-furandiylmethylene)-II. High Perform Polym 2:113–120
Patel HS, Patel HD (1992) Glass reinforced polyimides composites based on Poly(4-furanyl butan-2-one). High Perform Polym 4:35–40
Patel HS, Patel HD (1992) Polyimides based on furfural disulphide. High Perform Polym 4:237–246
Patel HS, Patel NP (1997) Poly(amido-imide)s based on amino terminated oligoimides. Polymer Polym Compos (UK) 5:159–164
Patel HS, Patel BP, Patel DB (2009) Synthesis, characterization and glass reinforcement of Poly(Ester Amido Imide)s. Int J Polymer Mater 58:625–635
Patel HS, Shah VJ, Vyas HS (1990) Synthesis, characterization and glass reinforcement of Poly(urethane-imide)s—Part 2. High Perform Polym 2:251–260
Patel HS, Vyas HS (1992) Synthesis, characterization, and glass-reinforcement of poly(oxysilane imide)s Dieangewandte Macromolecular Chemie 195:1–16
Patel HS, Patel VC (2000) Polyimides containing S-trizine ring (part-I). Ind J Polym Mater 46:743–756
Patel HS, Dixit BC, Patel NP (1999) Synthesis, characterization and fibre(glass and carbon) reinforced composite of poly(amido-imide)s. High Perform Polym 11:227–234
Patel HS, Patel NR (1994) Poly(ether-imide)s based on epoxy resin-I. High Perform Polym 6:13–19
Gaina V, Gaina C (2002) Synthesis and characterization of poly(ester-urethaneimide)s by Diels–Alder polyaddition. Polymer Plast Tech Eng 41:523–540
Mikroyannid JA (1990) Crosslinkable aromatic polyketones with maleimide pendent groups. J Poly Sci Pt A Polym Chem 28:669–677
Mastata FR, Bicu LG (2008) Synthesis and properties of multiallyl resins from epoxy formaldehyde resins. Ind Eng Chem Res 47:1355–1364
White LA, Weber JW, Mathias LJ (2001) Synthesis and thermal characterization of a one component maleimide-epoxy resin. Polym Bull 46:463–469
Patel HS, Vyas HS (1990) Synthesis, characterization and glass reinforcement of poly(urethane-imide)s – II. High Perform Polym 2:251–260
Patel HS, Vyas HS (1991) Poly(urethane-imide)s—1. Eur Polymer J 27:93–96
Patel HS, Vyas HS, Lad BD (1990) Glass-reinforced polyimide composites based on Poly(2,5-furandiylmethylene)—III High Perform Polym 2:245–248
Hummel DO, Heimen KU, Stenzenberger HJ (1974) Infrared spectroscopic determinations of the kinetics data of the polymerization of aliphatic bismaleimides. Appl Polym Sci 18:2015
Galanti AVJ (1984) A kinetic of the polymerization aliphatic imides. Appl Polym Sci 1611
Serafini TT, Delvigs P, Lightsey GR (1972) Thermally Stable polyimides from solution of monomeric reactants. J J Appl Polym Sci 16:905
Acknowledgements
The authors thanks to Udyog Bhavan, Gujarat government, Gandhinagar, Gujarat, INDIA for providing finnantial assistance. We also grateful to Head of the Department of Chemistry, for providing the necessary research facilities.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Patel, B.P., Patel, H.S. & Patel, D.B. Glass reinforcement of epoxy resin based Poly(urethane-imide-Ester)s. Int J Plast Technol 15, 163–173 (2011). https://doi.org/10.1007/s12588-012-9021-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12588-012-9021-9