Abstract
The silicon wafer polishing process has sensitive machining requirements owing to the interaction between various complex process factors, which can include the pad, slurry, applied pressure, polishing speed, polishing time, dressing condition, and the machining temperature. Among these important machining factors, applied pressure, polishing speed, and polishing time were examined. The optimum condition of wafer final polishing was investigated using the Taguchi approach. Moreover, variations in oscillation speed were added to the experiment and it was found that changing the surface contact velocity helped to improve the surface quality of the wafer. Furthermore, the pad surface characteristics which influences wafer surface quality after wafer final polishing with and without oscillation were studied and adding an oscillation speed in wafer final polishing has the dual benefit of improving wafer surface quality and reducing consumable costs. Finally, by selecting the optimum condition, it could achieve an ultra-precision wafer surface with almost no defects.
Similar content being viewed by others
References
Zhang, L., Biddut, A., and Ali, Y., “Dependence of Pad Performance on Its Texture in Polishing Mono-Crystalline Silicon Wafers,” International Journal of Mechanical Sciences, Vol. 52, No. 5, pp. 657–662, 2010.
P. Singer, “300mm Progress Report,” Semiconductor International, 2003.
Hooper, B., Byrne, G., and Galligan, S., “Pad Conditioning in Chemical Mechanical Polishing,” Journal of Materials Processing Technology, Vol. 123, No. 1, pp. 107–113, 2002.
Li, W., Shin, D. W., Tomozawa, M., and Murarka, S. P., “The Effect of the Polishing Pad Treatments on the Chemical-Mechanical Polishing of SiO2 Films,” Thin Solid Films, Vol. 270, No. 1, pp. 601–606, 1995.
Lee, E. S., Cha, J. W., and Kim, S. H., “Evaluation of the Wafer Polishing Pad Capacity and Lifetime in the Machining of Reliable Elevations,” International Journal of Machine Tools and Manufacture, Vol. 66, pp. 82–94, 2013.
Doi, T., Kasai, T., and Nakagawa, T., “CMP Technology for Semiconductor Planarization,” Books Hill Publishing Co., pp. 25–114, 2001.
Oh, S. and Seok, J., “An Integrated Material Removal Model for Silicon Dioxide Layers in Chemical Mechanical Polishing Processes,” Wear, Vol. 266, No. 7, pp. 839–849, 2009.
Lee, H., Park, B., and Jeong, H., “Mechanical Effect of Process Condition and Abrasive Concentration on Material Removal Rate Profile in Copper Chemical Mechanical Planarization,” Journal of Materials Processing Technology, Vol. 209, No. 4, pp. 1729–1735, 2009.
Lee, H. S., Park, B. Y., Seo, H. D., Chang, W. M., and Jeong, H. D., “A Study on the CMP of Lithium Tantalate Wafer,” Transactions of the KSME A, Vol. 29, No. 9, pp. 1276–1281, 2005.
Park, B. Y., Lee, H. S., Kim, H. J., Soe, H. D., Kim, K. Y., and Jeong, H. D., “Characteristics of Friction Affecting CMP Results,” Journal of the Korean Institute of Electronic Material Engineers, Vol. 17, No. 10, pp. 1041–1048, 2004.
Belkhir, N., Aliouane, T., and Bouzid, D., “Correlation between Contact Surface and Friction during the Optical Glass Polishing,” Applied Surface Science, Vol. 288, pp. 208–214, 2014.
Shin, Y. J., Lee, E. S., and Kang, J. H., “Identification of the Mechanical Aspects of Material Removal Mechanisms in CMP,” Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 5, pp. 7–12, 2000.
Yusoff, N., Ramasamy, M., and Yusup, S., “Taguchi’s Parametric Design Approach for the Selection of Optimization Variables in a Refrigerated Gas Plant,” Chemical Engineering Research and Design, Vol. 89, No. 6, pp. 665–675, 2011.
Park, S. H., “Design of Experiment,” Min-Young-Sa, pp. 8–22, 2003.
Lee, K. T. and Shin, K. S., “A Study on the Optimization of Tractor Muffler using by Taguchi Method and Experimental Design,” Proc. of Machine Research Conference of Cho-Sun Uni., pp. 313–326.
Gupta, S., Kumar, P., Chakkaravathi, A. A., Craciun, D., and Singh, R. K., “Investigation of Chemical Mechanical Polishing of Zinc Oxide Thin Films,” Applied Surface Science, Vol. 257, No. 13, pp. 5837–5843, 2011.
Savio, G., Meneghello, R., Concheri, G., and D’Angelo, L., “Process Optimization in Glass Polishing based on a Material Removal Model,” Advanced Science Letters, Vol. 19, No. 2, pp. 539–542, 2013.
Lim, H. S., Ryu, B. H., So, E. Y., Lee, K. S., and Sa, S. Y., “Optimization of Ceramic Grinding by Applying Taguchi Method,” Proc. of KSPE Autumn Conference, pp. 155–159, 2002.
Lin, C. F., Tseng, W. T., and Feng, M. S., “Process Optimization and Integration for Silicon Oxide Intermetal Dielectric Planarized by Chemical Mechanical Polish,” Journal of The Electrochemical Society, Vol. 146, No. 5, pp. 1984–1990, 1999.
Hansen, D. A. and Moloney, G., “The Effect of Carrier Oscillation on Within Wafer Non-Uniformity of CMP Removal Rate,” Proc. of International Chemical Mechanical Planarization for Ulsi Multilevel Interconnection Conference, Vol. 328–331, 2001.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, WK., Kim, SH., Choi, SG. et al. Effect of pad’s surface deformation and oscillation on monocrystalline silicon wafer surface quality. Int. J. Precis. Eng. Manuf. 15, 2301–2307 (2014). https://doi.org/10.1007/s12541-014-0594-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-014-0594-4