Abstract
The high temperature oxidation behaviour of ferritic stainless steel SUS 430 was investigated over the temperature range from 1000 to 1150 °C in humid air containing 18% water vapour. Isothermal thermogravimetric analyses were performed to study the oxidation kinetics. The microstructure, composition and thickness of the oxide scale formed were investigated via optical microscopy (OM), X-ray diffraction and a scanning electron microscope equipped with an energy dispersive spectrometer. The results indicate that breakaway oxidation occurs at all temperatures and that its onset is accelerated by increasing temperature. The growth rate of the multilayer oxide scale follows a parabolic law with apparent activation energy of 240.69 kJ/mol, and the formation of FeO is decreased when the temperature is higher than 1120°C. The inner oxide scale, Fe-Cr spinel, grows mainly inward and internal oxidation is observed even in a short oxidation test at 1150°C for 105 s. The mechanism of high temperature oxidation of SUS 430 in humid air containing 18% water vapour is discussed.
Similar content being viewed by others
References
W. Jin, J. Y. Choi, and Y. Y. Lee, ISIJ Int. 38, 739 (1998).
D. J. Ha, H. K. Sung, S. Lee, J. S. Lee, and Y. D. Lee, Mater. Sci. Eng. A 507, 66 (2009).
D. J. Ha, H. K. Sung, S. Lee, J. S. Lee, and Y. D. Lee, J. Korean Inst. Met. Mater. 46, 707 (2008).
W. Jin, J. Y. Choi, and Y. Y. Lee, ISIJ Int. 40, 789 (2000).
Y. Hidaka and S. Lida, Tetsu To Hagane 96, 156 (2010).
W. Sun, A. K. Tieu, Z. Jiang, and C. Lu, J. Mater. Process Tech. 155–156, 1307 (2004).
J. Shen, L. Zhou, and T. Li, Oxid. Met. 48, 347 (1997).
A. M. Huntz, A. Reckmann, C. Haut, C. Severac, M. Herbst, F. C. T. Resende, and A. C. S. Sabioni, Mater. Sci. Eng. A 447, 266 (2007).
Z. Yang, G. Xia, P. Singh, and J. W. Stevenson, Solid State Ionics 176, 1495 (2005).
A. N. Hansson, M. Montgomery, and m. A. J. Somers, Oxid Met 71, 201 (2009).
J. E. Hammer, S. J. Laney, R. W. Jackson, K. Coyne, F. S. Pettit, and G. H. Meier, Oxid. Met. 67, 1 (2007).
M. Palcut, L. Mikkelsen, K. Neufeld, M. Chen, R. Knibbe, and P. V. Hendriksen, Corros. Sci. 52, 3309 (2010).
Z. Y. Chen, L. J. Wang, F. S. Li, and K. C. Chou, J. Alloys Comp. 574, 437 (2013).
V. S. Dheeradhada, H. Cao, and M. J. Alinger, J. Power Sources 196, 1975 (2011).
P. Promdirek, G. Lothongkum, S. Chandra-Ambhorn, Y. Wouters, and A. Galerie, Oxid. Met. 81, 315 (2014).
J. Rufner, P. Gannon, P. White, M. Deibert, S. Teintze, R. Smith, and H. Chen, Int. J. Hydrogen Energy 33, 1392 (2008).
J. W. Kim, J. W. Choi, and D. B. Lee, Met. Mater. Int. 11, 131 (2005).
R. Y. Chen and W. Y. D. Yuen, Oxid. Met. 59, 433 (2002).
Q. Jin, J. Li, Y. Xu, X. Xiao, W. Zhang, and L. Jiang, Corros. Sci. 52, 2846 (2010).
H. E. Evans, Int. Mater. Rev. 40, 1 (1995).
H. E. Evans, Mater. Sci. Eng., A A120, 139 (1989).
H. E. Evans, Oxid. Met. 52, 379 (1999).
H. C. Graham and H. H. Davis, J. Am. Ceram. Soc. 54, 89 (1971).
D. L. Douglass, P. Kofstad, P. Rahmel, and G. C. Wood, Oxid. Met. 45, 529 (1996).
H. Asteman, J. E. Svensson, and L. G. Johansson, Oxid. Met. 57, 193 (2002).
S. Henry, A. Galerie, and L. Antoni, Mater. Sci. Forum 369- 372, 353 (2001).
R. Y. Chen and W. Y. D. Yuen, Oxid. Met. 53, 539 (2000).
R. Y. Chen, ISIJ Int. 45, 52 (2005).
D. J. Young, High Temperature Oxidation and Corrosion of Metals, Elsevier, Oxford (2008).
A. M. Huntz, J. Mater. Sci. Lett. 18, 1981 (1999).
V. Badin, E. Diamanti, P. Forêt, and E. Darque-Ceretti, Oxid. Met. 82, 347 (2014).
T. Nguyen, J. Zhang, and D. Young, Oxid. Met. 81, 549 (2014).
M. Reichardt, Wire Ind. 68, 503, 505 (2001).
A. L. Marasco and D. J. Young, Oxid. Met. 36, 157 (1991).
S. Rao, Oxid. Met. 77, 9 (2011).
A. C. S. Sabioni, A. M. Huntz, L. C. Borges, and F. Jomard, Philos. Mag. 87, 1921 (2007).
R. Pettersson, L. Liu, and J. Sund, Corros. Eng. Sci. Techn. 40, 211 (2005).
R. N. Durham, B. Gleeson, and D. J. Young, Oxid. Met. 50, 139 (1998).
N. Birks, G. H. Meier, and F. S. Pettit, High-Temperature Oxidation of Metals, 2nd ed., pp.133–134, Cambridge University Press, Cambridge (2005).
A. Yamauchi, K. Kurokawa, and H. Takahashi, Oxid. Met. 59, 517 (2003).
N. K. Othman, J. Zhang, and D. J. Young, Oxid Met 73, 337 (2010).
A. Fry, S. Osgerby, and M. Wright, Oxidation of Alloys in Steam Environments-A Review, http://publications.npl.co.uk/npl_web/pdf/matc90.pdf (2002).
A. U. Seybolt, J. Electrochem. Soc., 147 (1960).
K. Honda, T. Maruyama, T. Atake, and Y. Saito, Oxid. Met. 38, 347 (1992).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, X., Jiang, Z., Wei, D. et al. High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air. Met. Mater. Int. 21, 251–259 (2015). https://doi.org/10.1007/s12540-015-4168-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-015-4168-5