Abstract
A comparative study of the high-temperature oxidation behavior and mechanism of 0Cr25Ni20 austenitic heat-resistant stainless steel (AHSS) and 0Cr18AlSi ferritic heat-resistant stainless steel (FHSS) at 800°C, 900°C, and 1000°C in air up to 140 h was performed using isothermal oxidation tests. The oxidation kinetics of 0Cr25Ni20 AHSS and 0Cr18AlSi FHSS followed the parabolic law. The oxide films on 0Cr25Ni20 AHSS were composed of continuous and dense Cr2O3, MnCr2O4, and a small amount of NiMn2O4, whereas silicon exhibited internal oxidation and deteriorated the adhesion between the oxide film and substrate. Nickel-free 0Cr18AlSi FHSS exhibited good oxidation resistance at 800°C and 900°C due to dense, continuous, and well-adhered multicomponent oxide films containing Al2O3, Cr2O3, MnCr2O4, and a small amount of MnFe2O4. The oxidation resistance of 0Cr18AlSi FHSS declined at 1000°C, mainly due to the formation of nonprotective Fe2O3 and severe internal oxidation of aluminum.
Similar content being viewed by others
References
R.L. Klueh and A.T. Nelson, J. Nucl. Mater. 371, 37 (2007).
Ł. Kowalczyk, W. Elsner, P. Niegodajew, and M. Marek, Appl. Therm. Eng. 96, 200 (2016).
R. Viswanathan, K. Cpleman, and U. Rao, Int. J. Pres. Ves. Pip. 83, 778 (2006).
F. Masuyama, ISIJ Int. 41, 612 (2001).
J.H. Kim, B.K. Kim, D.I. Kim, P.P. Choi, D. Raabe, and K.W. Yi, Corros. Sci. 96, 52 (2015).
N. Karimi, F. Riffard, F. Rabaste, S. Perrier, R. Cueff, C. Issartel, and H. Buscail, Appl. Surf. Sci. 254, 2292 (2008).
V.T. Ha and W.S. Jung, Mater. Sci. Eng., A 558, 103 (2012).
X. Zhong, S. Xia, J. Xu, and T. Shoji, J. Nucl. Mater. 511, 417 (2018).
Q.X. Dai, Metal material science, 2nd ed. (Beijing: Chemical Industry Press, 2011), pp. 134–138.
S. Ningshen, M. Sakairi, K. Suzuki, and S. Ukai, Appl. Surf. Sci. 274, 345 (2013).
Y. Behnamian, A. Mostafaei, A. Kohandehghan, B.S. Amirkhiz, D. Serate, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, and J.L. Luo, Mater. Charact. 120, 273 (2016).
H. Li, B. Zhang, Z. Jiang, S. Zhang, H. Feng, P. Han, N. Dong, W. Zhang, G. Li, G. Fan, and Q. Lin, J. Alloys Compd. 686, 326 (2016).
M.E. Story and B.A. Webler, JOM 70, 1225 (2018).
M.L. Lau and E.J. Lavernia, Mater. Sci. Eng., A 272, 222 (1999).
I. Saeki, H. Konno, and R. Furuichi, Corros. Sci. 38, 19 (1996).
Z. Oksiuta, J. Mater. Sci. 48, 4801 (2013).
H. Fujikawa and S.B. Newcomb, Oxid. Met. 77, 85 (2012).
M.P. Brady, Y. Yamamoto, M.L. Santella, P.J. Mazias, B.A. Pint, C.T. Liu, Z.P. Lu, and H. Be, JOM 60, 12 (2008).
C. Boulesteix and F. Pedraza, Surf. Coat. Tech. 339, 27 (2018).
T. Liu, C. Wang, H. Shen, W. Chou, N.Y. Iwata, and A. Kimura, Corros. Sci. 76, 310 (2013).
J. Yu, S. Liu, F. Li, and T. Wang, Surf. Coat. Tech. 309, 1089 (2017).
D.N. Zou, Y.Q. Zhou, X. Zhang, W. Zhang, and Y. Han, Mater. Charact. 136, 435 (2018).
Y. Xu, X. Zhang, L. Fan, J. Li, X. Yu, X. Xiao, and L. Jiang, Corros. Sci. 100, 311 (2015).
T.J. Park, J.P. Kong, S.H. Uhm, I.S. Woo, J.S. Lee, and C.Y. Kan, J. Mater. Proc. Tech. 211, 415 (2011).
Y. Behnamian, A. Mostafaei, A. Kohandehghan, B.S. Amirkhiz, D. Serate, Y. Sun, S. Liu, E. Aghaie, Y. Zeng, M. Chmielus, W. Zheng, D. Guzonas, W. Chen, and J.L. Luo, Corros. Sci. 106, 188 (2016).
M.R. Ardigo-Besnard, I. Popa, O. Heintza, R. Chassagnon, M. Vilasi, F. Herbst, P. Girardon, and S. Chevalier, Appl. Surf. Sci. 412, 196 (2017).
Q.Z. Gao, X. Dong, C. Li, Z.X. Lin, X.X. Yang, and M. Dai, J. Alloys Compd. 651, 537 (2015).
G. Fu and L. Wei, Surf. Coat. Tech. 294, 8 (2016).
C. Wagner, J. Electrochem. Soc. 99, 369 (1952).
M.S. Li, High temperature corrosion of metals, 1st ed. (Beijing: Metallurgical Industry Press, 2001), pp. 3–10.
J.G. Goedjen and D.A. Shores, Oxid. Metals 37, 125 (1992).
Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Zahiri, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, and J. Luo, J. Supercrit. Fluid. 127, 191 (2017).
M. Rivollier, J.L. Courouau, M. Tabarant, C. Blanc, and M. Giorgi, J. Nucl. Mater. 500, 337 (2018).
S. Swaminathan, Y.S. Lee, and D.I. Kim, J. Power Sources 327, 104 (2016).
X. Cheng, L. Fan, H. Yin, L. Liu, K. Du, and D. Wang, Corros. Sci. 112, 54–62 (2016).
J. Wang, S. Lu, L. Rong, D. Li, and Y. Li, Corros. Sci. 111, 13 (2016).
F.H. Stott, G.C. Wood, and J. Stringert, Oxid. Metals. 44, 113 (1995).
L.F. He, P. Roman, B. Leng, K. Sridharan, M. Anderson, and T.R. Allen, Corros. Sci. 82, 67 (2014).
G.C. Wood, Oxid. Metals 2, 11 (1970).
R. Haugsrud, Corros. Sci. 45, 211 (2003).
A. Col, V. Parry, and C. Pascal, Corros. Sci. 114, 17 (2017).
Acknowledgements
The authors acknowledge support of this work by the National Natural Science Foundation of China (51774226), Iron and Steel Joint Fund of the National Natural Science Foundation of China (U1460104), Scientific Research Program of Shaanxi Education Department (17JF013), Key Program of Shaanxi Province (2018ZDXM-GY-149), and Major Program of Science and Technology in Shanxi Province (No. 20181101016).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Zhou, Y., Zou, D., Pang, Y. et al. Comparative Study on the Oxidation Behavior of Austenitic and Ferritic Heat-Resistant Stainless Steels at High Temperatures. JOM 71, 3744–3754 (2019). https://doi.org/10.1007/s11837-019-03579-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-019-03579-5