Abstract
Ultrafine particulate matter and airborne microorganisms present in atmosphere are responsible for affecting the human health and the global climate. The development of bifunctional membranes which can simultaneously filter the particulate matter (PM) and inhibit the growth of microorganisms is the need of the hour. In this study, electrospun polyacrylonitrile (PAN)/zinc oxide modified montmorillonite (ZnO-Mt) nanofibrous nanocomposites with varying concentrations of ZnO-Mt ranging from 0.25 % to 1.00 % (w/w) have been prepared to be used as filtration membranes. The addition of ZnO-Mt in PAN dope solution affects its viscosity and ionic conductivity. The surface morphology of the nanofibrous membranes was studied using field emission scanning electron microscopy. The average diameter of PAN nanofibers and its nanocomposites was found to be between 247 nm to 468 nm. An increase in porosity, air permeability and water vapor transmission rate of the nanofibrous membranes was observed with an increase in concentration of ZnO-Mt in PAN nanofibers upto 0.75 %. The addition of ZnO-Mt enhanced the thermal stability of PAN nanofibrous membranes from 188 °C to 310 °C. The filtration efficiency of the nanofibrous membranes was evaluated using environment particle air monitor instrument. PAN/ZnO-Mt nanofibrous membranes having 0.75 % w/w ZnO-Mt exhibited filtration efficiency of 99.6 %. The antimicrobial property of PAN/ZnO-Mt nanofibrous membranes was studied against S. aureus and E. coli bacterial strains showing 98.85 % and 96.23 % antibacterial activity respectively.
Similar content being viewed by others
References
J. S. Apte, J. D. Marshall, A. J. Cohen, and M. Brauer, Environ. Sci. Technol., 49, 8057 (2015).
M. Xie, M. P. Hannigan, and K. C. Barsanti, Environ. Sci. Technol., 48, 9053 (2014).
L. P. Naeher, K. R. Smith, B. P. Leaderer, L. Neufeld, and D. T. Mage, Environ. Sci. Technol., 35, 575 (2001).
M. C. Turner, D. Krewski, C. A. Pope, Y. Chen, S. M. Gapstur, and M. J. Thun, Am. J. Respir. Crit. Care Med., 184, 1374 (2011).
L. Jing, K. Shim, C. Y. Toe, T. Fang, C. Zhao, R. Amal, K. N. Sun, J. H. Kim, and Y. H. Ng, ACS Appl. Mater. Interfaces, 8, 7030 (2016).
M. H. Mohraz, F. Golbabaei, I. J. Yu, M. A. Mansournia, A. S. Zadeh, and S. F. Dehghan, Int. J. Environ. Sci. Technol., 16, 681 (2019).
J. Douwes, P. Thorne, N. Pearce, and D. Heederik, Ann. Occup. Hyg., 47, 187 (2003).
K. Desai, K. Kit, J. Li, P. Michael Davidson, S. Zivanovic, and H. Meyer, Polymer (Guildf), 50, 3661 (2009).
L. Chen, Ph.D. Thesis, MIT, Cambridge MA, 2009.
H. Liu, C. Cao, J. Huang, Z. Chen, G. Chen, and Y. Lai, Nanoscale, 12, 437 (2020).
S. Yan, Y. Yu, R. Ma, and J. Fang, Polym. Adv. Technol., 30, 1635 (2019).
M. Cao, F. Gu, C. Rao, J. Fu, and P. Zhao, Sci. Total Environ., 666, 1011 (2019).
S. A. Hosseini and H. V. Tafreshi, Powder Technol., 201, 153 (2010).
X. Mao, Y. Si, Y. Chen, L. Yang, F. Zhao, B. Ding, and J. Yu, RSC Adv., 2, 12216 (2012).
S. Zhang, H. Liu, X. Yin, J. Yu, and B. Ding, ACS Appl. Mater. Interfaces, 8, 8086 (2016).
J. Choi, B. J. Yang, G. N. Bae, and J. H. Jung, ACS Appl. Mater. Interfaces, 7, 25313 (2015).
Y. Liu, M. Park, B. Ding, J. Kim, M. El-Newehy, S. S. Al-Deyab, and H. Y. Kim, Fiber. Polym., 16, 629 (2015).
C. Liu, P. C. Hsu, H. W. Lee, M. Ye, G. Zheng, N. Liu, W. Li, and Y. Cui, Nat. Commun., 6, 6205, (2015).
S. Lee, A. R. Cho, D. Park, J. K. Kim, K. S. Han, I. J. Yoon, M. H. Lee, and J. Nah, ACS Appl. Mater. Interfaces, 11, 2750 (2019).
R. Balgis, C. W. Kartikowati, T. Ogi, L. Gradon, L. Bao, K. Seki, and K. Okuyama, Chem. Eng. Sci., 137, 947 (2015).
B. Wang, Z. Sun, Q. Sun, J. Wang, Z. Du, C. Li, and X. Li, Environ. Pollut., 249, 851 (2019).
M. Hashmi, S. Ullah, and I. S. Kim, J. CRBIOT, 1, 1 (2019).
Y. Wang, X. Zhao, L. Duan, F. Wang, H. Niu, W. Guo, and A. Ali, Mater. Sci. Semicond. Processing, 29, 372 (2015).
A. B. Djurišić, Y. H. Leung, W. C. H. Choy, K. W. Cheah, and W. K. Chan, Appl. Phys. Lett., 84, 2635 (2004).
Z. Fan and J. G. Lu, J. Nanosci. Nanotechnol., 5, 1561 (2005).
A. Sirelkhatim, S. Mahmud, A. Seeni, N. H. M. Kaus, L. C. Ann, S. K. M. Bakhori, H. Hasan, and D. Mohamad, Nano-Micro Lett., 7, 219 (2015).
J. P. Kumar, P. V. R. K. Ramacharyulu, G. K. Prasad, and B. Singh, Appl. Clay Sci., 116–117, 263 (2015).
A. Zyoud, W. Jondi, N. AlDaqqah, S. Asaad, N. Qamhieh, A. R. Hajamohideen, M. H. S. Helal, H. Kwon, and H. S. Hilal, Solid State Sci., 74, 131 (2017).
C. M. Srivastava and R. Purwar, Mater. Sci. Eng. C, 68, 276 (2016).
A. Sampling, “EPAM-5000”, https://www.skcinc.com/catalog/pdf/instructions/1516.pdf (Accesssed April 15, 2021).
R. Purwar, P. Mishra, and M. Joshi, AATCC Rev., 8, 36 (2008).
R. Purwar, K. S. Goutham, and C. M. Srivastava, Fiber. Polym., 17, 1206 (2016).
R. Al-Attabi, Y. Morsi, W. Kujawski, L. Kong, J. A. Schütz, and L. F. Dumée, Sep. Purif. Technol., 215, 500 (2018).
S. Fotiadou, C. Karageorgaki, K. Chrissopoulou, K. Karatasos, I. Tanis, D. Tragoudaras, B. Frick, and S. H. Anastasiadis, Macromolecules, 46, 2842 (2013).
C. Philippe and B. Claire in “Rubber Nanocomposites: Preparations, Properties and Applications” (S. Thomas and R. Stephen Eds.), pp.353–390, Wiley, Chichester, 2010.
S. Ahmadzadeh, A. Nasirpour, J. Keramat, and S. Desobry, Cellulose, 22, 1829 (2015).
S. Sikkanthar, S. Karthikeyan, S. Selvasekarapandian, D. V. Pandi, S. Nithya, and C. Sanjeeviraja, J. Solid State Electrochem., 19, 987 (2015).
R. Al-Attabi, L. F. Dumée, J. A. Schütz, and Y. Morsi, Sci. Total Environ., 625, 706 (2018).
N. Bhardwaj and S. C. Kundu, Biotechnol. Adv., 28, 325 (2010).
R. Al-Attabi, L. F. Dumée, L. Kong, J. A. Schütz, and Y. Morsi, Adv. Eng. Mater., 20, 1700572 (2018).
H. J. Haroosh, D. S. Chaudhary, and Y. Dong, J. Appl. Polym. Sci., 124, 3930 (2012).
S. Almuhamed, M. Bonne, N. Khenoussi, J. Brendle, L. Schacher, B. Lebeau, and D. C. Adolphe, J. Ind. Eng. Chem., 35, 146 (2015).
M. Y. Haddad and H. F. Alharbi, J. Appl. Polym. Sci., 136, 47209 (2019).
X. Hou, X. Yang, L. Zhang, E. Waclawik, and S. Wu, Mater. Des., 31, 1726 (2010).
R. Jalili, M. Morshed, and S. A. H. Ravandi, J. Appl. Polym. Sci., 101, 4350 (2006).
S. F. Fennessey and R. J. Farris, Polymer, 45, 4217 (2004).
Z. M. Wang in “Nanotechnology in Textiles Theory and applications”, 1st ed. (R. Mishra and J. Militky), pp.311–351, Elsevier Ltd., 2010.
K. Stevens and M. Fuller in “Textile-led Design for the Active Ageing Population”, 1st ed. (J. McCann and D. Bryson), pp.117–138, Elsevier Ltd., 2015.
R. Roche and F. Yalcinkaya, ChemistryOpen, 8, 97 (2019).
J. Wang, Y. Li, H. Tian, J. Sheng, J. Yu, and B. Ding, RSC Adv., 4, 61068 (2014).
R. Zhang, B. Liu, A. Yang, Y. Zhu, C. Liu, G. Zhou, J. Sun, Po-Chun Hsu, W. Zhao, D. L. Y. Liu, A. Pei, J. Xie, W. Chen, J. Xu, Y. Jin, T. Wu, X. Huang, and Y. Cui, Nano Letters, 18, 1130 (2018).
H. Liu, J. Huang, J. Mao, Z. Chen, G. Chen, and Y. Lai, iScience, 19, 214 (2019).
R. Al-Attabi, Y. Morsi, J. A. Schütz, and L. F. Dumée, Sci. Total Environ., 647, 725 (2019).
J. Mao, Y. Tang, Y. Wang, J. Huang, X. Dong, Z. Chen, and Y. Lai, iScience, 16, 133 (2019).
J. T. Seil and T. J. Webster, Int. J. Nanomedicine, 7, 2767 (2012).
L. C. Ann, S. Mahmud, S. K. M. Bakhori, A. Sirelkhatim, D. Mohamad, H. Hasan, A. Seeni, and R. A. Rahman, Appl. Surf. Sci., 292, 405 (2014).
N. Jones, B. Ray, K. T. Ranjit, and A. C. Manna, FEMS Microbiol. Lett., 279, 71 (2008).
M. Li, L. Zhu, and D. Lin, Environ. Sci. Technol., 45, 1977 (2011).
R. Jalal, E. K. Goharshadi, M. Abareshi, M. Moosavi, A. Yousefi, and P. Nancarrow, Mater. Chem. Phys., 121, 198 (2010).
K. T. Shalumon, K. H. Anulekha, S. V. Nair, S. V. Nair, K. P. Chennazhi, and R. Jayakumar, Int. J. Biol. Macromol., 49, 247 (2011).
Acknowledgements
The authors thankfully acknowledge the financial support received from Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Govt. of India (EMR/2017/002833) and Prof. S K Singh and Dr. Rajeev Mishra from Department of Environment Engineering, DTU for particulate matter filtration efficiency test.
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material (ESM)
12221_2021_914_MOESM1_ESM.pdf
Development of efficient antimicrobial zinc oxide modified montmorillonite incorporated polyacrylonitrile nanofibers for particulate matter filtration
Rights and permissions
About this article
Cite this article
Bansal, P., Purwar, R. Development of Efficient Antimicrobial Zinc Oxide Modified Montmorillonite Incorporated Polyacrylonitrile Nanofibers for Particulate Matter Filtration. Fibers Polym 22, 2726–2737 (2021). https://doi.org/10.1007/s12221-021-0914-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-021-0914-0