Abstract
In the past, bone fractures due to accidents were rectified by surgery and reconstruction of bone structure. In recent times, researchers have been made to find a solution by producing alternate biomaterials. Hydroxyapatite (HAp) is one of the most important bioactive materials used as a substitute for human hard tissue because of its composition being very similar to human bones and teeth. A study has proved that HAp has been used for bone regeneration in clinical trials in the mid-1980. HAp has been used as implant coatings and graft materials and also used as granules, cement, and pastes for bone regenerative applications. HAp coatings on bioimplants improved biocompatibility, bioactivity, and biological fixation. Moreover, some of the deposition methods can be employed to increase the cellular responses of bone regeneration such as sputtering, spraying, electrodeposition, and pulsed layer deposition. The researcher has prepared hydroxyapatite from chemical and natural sources. The surface area and intrinsic properties of the HAp play a vital role in bone-related applications. This can be achieved by synthesizing the HAp from natural sources rather than synthetic materials. The HAp obtained from the chemical source is not fulfilling the requirements of the natural bone. A variety of biowaste materials such as eggshell, crab shell, snail shell, bovine bone, fishbone, and fish scales are available in nature and can be converted to useful calcium source for HAp. The present study is to produce the HAp from biowaste materials like eggshell and chemical sources using the wet precipitation method. The synthesized HAp is coated on the Ti6Al4V alloy using the electrodeposition method, and it is immersed in SBF solution at 37 °C for corrosion testing. The coated samples are investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), electrochemical study, field emission scanning electron icroscopy (FESEM), energy dispersive X-ray analysis (EDAX), AFM, and antibacterial activity with two different microorganisms. FTIR and XRD confirm the functional groups and crystallinity of the HAp. The good antibacterial activity of the HAp is observed against two bacterial strains. The corrosion studies reveal that the HAp derived from a natural source is eco-friendly and nontoxic and has excellent corrosion resistivity and cell adhesion properties. A strong bond is formed between the naturally derived HAp with bone tissue which is involved in the bio-resorption process and does not pose any side effect to the human body compared to synthetically derived HAp. In addition, the biowaste materials are converted to useful biomaterials and can reduce environmental pollution.
Similar content being viewed by others
Data Availability
No dataset was generated during the study.
References
Manivasagam, G., Dhinasekaran, D., & Rajamanickam, A. (2010). Biomedical implants: Corrosion and its prevention -A review. Recent Patents on Corrosion Science, 2, 40–54.
Jin, W., & Chu, P. K. (2019) Orthopedic implants. In R. Narayan (Ed.),Encyclopedia of biomedical engineering.vol. 2, pp. 425–439.
Priyadarshini, B., Ramya, S., Shinyjoy, E., Kavitha, L., Gopi, D., & Vijayalakshmi, U. (2021). Structural, morphological and biological evaluations of cerium incorporated hydroxyapatite sol–gel coatings on Ti–6Al–4V for orthopaedic applications. Journal of Material and Research Technology, 12, 1319–1338.
Stango, S., Xavier, A., Karthick, D., Swaroop, S., Mudali, U. K., & Vijayalakshmi, U. (2018). Development of hydroxyapatite coatings on laser textured 316 LSS and Ti-6Al-4V and its electrochemical behavior in SBF solution for orthopedic applications. Ceramics International, 44(3), 3149–3160.
Jiang, J., Han, G., Zheng, X., Chen, G., & Zhu, P. (2019). Characterization and biocompatibility study of hydroxyapatite coating on the surface of titanium alloy. Surface & Coatings Technology, 375, 645–651.
Chellappa, M., & Vijayalakshmi, U. (2017). Improved corrosion resistant and mechanical behavior of distinct composite coatings (silica/titania/zirconia) on Ti–6Al–4V deposited by EPD. Journal of Asian Ceramic Societies, 5(3), 326–333.
Rajendran, A., & Pattanayak, D. K. (2014). Silver incorporated antibacterial, cell compatible and bioactive titania layer on Ti metal for biomedical applications. RSC Advances, 4(106), 61444–61455.
Mokabber, T., Lu, L.Q., van Rijn, P., Vakis, A.I., Pei, Y.T. (2017) Crystal growth mechanism of calcium phosphate coatings on titanium by electrochemical deposition. Surface and Coating Technology
Xia, Lunguo., Xie, Youtao., Fang, Bing., Wang, Xiuhui., Lin, Kaili. (2018) In situ modulation of crystallinity and nano-structures to enhance the stability and osseointegration of hydroxyapatite coatings on Ti-6Al-4V implants. Chemical Engineering
Akram, M., Ahmed, R., Shakir, I., Ibrahim, W. A. W., & Hussain, R. (2014). Extracting hydroxyapatite and its precursors from natural resources. Journal of Materials Science, 49(2014), 1461.
Fan, L., Cao, M., Gao, S., Wang, W., Peng, K., Tan, C., Wen, F., Tao, S., Xie, W. (2012). Preparation and characterization of a quaternary ammonium derivative of pectin. Carbohydrate Polymers, 88(2012), 707.
Suchanek, W., Byrappa, K., Shuk, P., Riman, R. E., Janas, V. F., & TenHuisen, K. S. (2004). Biomaterials, 25(2004), 4647.
Wojciech, L., & Suchanek; Pavel Shuk; Kullaiah Byrappa; Richard E. Riman; Kevor S. TenHuisen; Victor F. Janas,. (2002). Mechanochemical–hydrothermal synthesis of carbonated apatite powders at room temperature. Biomaterials, 23, 699–710.
Mathina, M., Shinyjoy, E., Kavitha, L., Manoravi, P., & Gopi, D. (2020). A comparative study of naturally and synthetically derived bioceramics for biomedical applications. Materials Today: Proceedings, 26, 3600-3603. https://doi.org/10.1016/j.matpr.2019.08.222
Coelho, C. C., Araújo, R., Quadros, P. A., Sousa, S. R., & Monteiro, F. J. (2019). Antibacterial bone substitute of hydroxyapatite and magnesium oxide to prevent dental and orthopaedic infections. Materials Science and Engineering: C, 97, 529-538.
Rahavi, S. S., Ghaderi, O., Monshi, A., & Fathi, M. H. (2017). A comparative study on physicochemical properties of hydroxyapatite powders derived from natural and synthetic sources. Russian Journal of Non-Ferrous Metals, 58(3), 276–286.
Osseni, S., Bonou, S., Sagbo, E., Ahouansou, R., Agbahoungbata, M., Neumeyer, D., & Mauricot, R. (2018). Synthesis of calcium phosphate bioceramics based on snail shells: Towards a valorization of snail shells from Republic of Benin. 8, 90–95.
Khandelwal, H., & Prakash, satya. (2016). Synthesis and characterization of hydroxyapatite powder by eggshell. Journal of Minerals and Materials Characterization and Engineering, 04, 119–126.
Chaudhuri, B., Bhadra, D., Dash, Dr., & Suryanarayan., Sardar, G., Pramanik, Krishna., Chaudhuri, Bijay. (2013). Hydroxyapatite and hydroxyapatite-chitosan composite from crab shell. Journal of Biomaterials and Tissue Engineering, 3, 653–657.
Zhou, H., Yang, M., Zhang, M., Hou, S., Kong, S., Yang, L., & Deng, L. (2016). Preparation of Chinese mystery snail shells derived hydroxyapatite with different morphology using condensed phosphate sources. Ceramics International, 42(15), 16671–16676.
Barakat, N. A. M., Khil, M. S., Omran, A. M., Sheikh, F. A., & Kim, H. Y. (2009). Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods. Journal of Materials Processing Technology, 209(7), 3408–3415.
Boutinguiza, M., Pou, J., Comesaña, R., Lusquiños, F., De Carlos, A., & León, B. (2012). Biological hydroxyapatite obtained from fish bones. Materials Science and Engineering: C, 32(3), 478-486.
Muhammad, N., Gao, Y., Iqbal, F., Ahmad, P., Ge, R., Nishan, U., Rahim, A., Gonfa, G., & Ullah, Z. (2016). Extraction of biocompatible hydroxyapatite from fish scales using novel approach of ionic liquid pretreatment. Separation and Purification Technology, 161, 129–135.
Yu, H.-N., Hsu, H.-C., Wu, S.-C., Hsu, C.-W., Hsu, S.-K., & Ho, W.-F. (2020). Characterization of nano-scale hydroxyapatite coating synthesized from eggshells through hydrothermal reaction on commercially pure titanium. Coatings, 10(2), 112.
Atiyah, A. G., Al-Falahi, N. H., & Farhan, F. K. (2018). Synthesis and structure of eggshell hydroxyapatite bone implant. Online Journal of Veterinary Research, 22(6), 495-500.
Wu, S.-C., Tsou, H.-K., Hsu, H.-C., Hsu, S.-K., Liou, S.-P., & Ho, W.-F. (2013). A hydrothermal synthesis of eggshell and fruit waste extract to produce nanosized hydroxyapatite. Ceramics International, 39(7), 8183–8188.
R B, Durairaj, Ramachandran, Sathyaseelan. (2018). In vitro characterization of electrodeposited hydroxyapatite coatings on titanium (Ti6AL4V) and magnesium (AZ31) alloys for biomedical application. International Journal of Electrochemical Science, 13(2018), 4841–4854.
Suchanek, W., & Yoshimura, M. (1998). Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants. Journal of Materials Research, 13, 94.
Kumar, G. S., Govindan, R., & Girija, E. K. (2014). In situ synthesis, characterization and in vitro studies of ciprofloxacin loaded hydroxyapatite nanoparticles for the treatment of osteomyelitis. Journal of Materials Chemistry B, 2, 5052.
Kumar, G. S., Rajendran, S., Karthi, S., Govindan, R., Girija, E. K., Karunakaran, G., & Kuznetsov, D. (2017). Green synthesis and antibacterial activity of hydroxyapatite nanorods for orthopedic applications. MRS Communications., 7(2), 183–188.
Tahriri, M., & Moztarzadeh, F. (2014). Preparation, characterization, and in vitro biological evaluation of PLGA/nano-fluorohydroxyapatite (FHA) microsphere-sintered scaffolds for biomedical applications. Applied Biochemistry and Biotechnology, 172(5), 2465–2479.
Barabas, R., Czik, M., Dekany, I., et al. (2013). Comparative study of particle size analysis of hydroxyapatite-based nanomaterials. Chemical Papers, 67(11), 1414–1423.
Leventouri, T. H., Chakoumakos, B. C., Papanearchou, N., et al. (2001). Crystal structure studies of natural and synthetic apatite by neutron powder diffraction. Materials Science Forum, 378–381, 517–522.
Kim, Y. H., & Tabata, Y. (2015). Dual-controlled release system of drugs for bone regeneration. Advanced Drug Delivery Reviews, 94, 28–40.
Gopi, D., Prakash, C. A., & V., Kavitha, L., Kannan, S., Bhalaji, P.R., Shinyjoy, E., Ferreira, J.M.F. (2011). A facile electrodeposition of hydroxyapatite onto borate passivated surgical grade stainless steel. Corrosion Science., 53(6), 2328–2334.
Sridevi, S., Sutha, S., Kavitha, L., & Gopi, D. (2020). Physicochemical and biological behaviour of biogenic derived hydroxyapatite and carboxymethyl cellulose/sodium alginate biocomposite coating on Ti6Al4V alloy for biomedical applications. Material Chemistry and Physics, 254, 123455.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation and data collection were performed by M. Kalpana. The analysis and interpretation of the data were performed by R. Nagalakshmi. The first draft of the manuscript was written by R. Nagalakshmi, and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics Approval
Not applicable.
Consent to Participate
Informed consent was obtained from all individual participants included in the study.
Consent for Publication
Not applicable.
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kalpana, M., Nagalakshmi, R. Nano Hydroxyapatite for Biomedical Applications Derived from Chemical and Natural Sources by Simple Precipitation Method. Appl Biochem Biotechnol 195, 3994–4010 (2023). https://doi.org/10.1007/s12010-022-03968-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12010-022-03968-8