Abstract
FeCr-based nanostructured coatings were deposited on a 301S stainless steel substrate by the high-velocity arc spraying process in the current work. The oxidation behavior of the coatings exposed to elevated temperatures (700°C and 900°C) under laboratory conditions as well as in an actual industrial environment of a coal-fired boiler (at 700 ± 10°C) was investigated. X-ray diffraction, scanning electron microscopy/energy-dispersive analysis, and transmission electron microscopy techniques were used to characterize the coating as well as to analyze the corrosion products for elucidating the corrosion mechanisms. The microhardness of the coating was found to be 520–1100 HV. The (FeCr)-based nanostructured coating showed good adherence to the 310S substrate and excellent oxidation resistance during the exposures with no tendency for spallation of its oxide scales in both environments. The nanosized grain morphology of the coating facilitated the formation of protective scales, which is continuous, adherent, and nonporous due to the higher diffusivity of alloying elements in the coatings. It precludes high-temperature oxidation by acting as a diffusion barrier between the environment and the coating.
Similar content being viewed by others
References
T.S. Sidhu, S. Prakash, and R.D. Agrawal, Surf. Coat. Technol. 201, 273 (2006).
T.S. Sidhu, S. Prakash, and R.D. Agrawal, J. Therm. Spray Technol. 15, 811 (2006).
D. Wang, Surf. Coat. Technol. 36, 49 (1988).
S. Collins, Power 137, 51 (1993).
B. Wang, Wear 199, 24 (1996).
S. Kamal, R. Jayaganthan, and S. Prakash, Surf. Coat. Technol. 203, 1004 (2009).
M. Kaur, H. Singh, and S. Prakash, J. Therm. Spray Technol. 18, 619 (2008).
J.H. He, M. Ice, M. Schoenung, D.H. Shin, and E.J. Lavernia, J. Therm. Spray Technol. 10, 293 (2001).
B.S. Sidhu, D. Puri, and S. Prakash, Mater. Sci. Eng. A 368, 149 (2004).
M.H. Staia, T. Valente, C. Bartuli, D.B. Lewis, C.P. Constable, A. Roman, J. Lesage, D. Chicot, and G. Mesmacque, Surf. Coat. Technol. 146–147, 563 (2001).
B.S. Sidhu and S. Prakash, J. Mater. Process. Technol. 172, 52 (2006).
S.S. Chatha, H.S. Sidhu, and B.S. Sidhu, Surf. Coat. Technol. 200, 4212 (2012).
M. Kaur, H. Singh, and S. Prakash, Surf. Coat. Technol. 206, 530 (2011).
S. Kamal, R. Jayaganthan, and S. Prakash, J. Alloy. Compd. 472, 378 (2009).
J.K.N. Murthy and B. Venkataraman, Surf. Coat. Technol. 200, 2643 (2006).
G. Barbezat, A.R. Nicoll, and A. Sickinger, Wear 162–164, 529 (1993).
B.Q. Wang and M.W. Seitz, Wear 250, 755 (2001).
G. Liu, K. Rozniatowski, and K.J. Kurzydlowski, Mater. Charact. 46, 99 (2001).
L.L. Ma, L.S. Gaung, Y. Jia, L. Juan, and L. Jian, Trans. Nonferrous Met. Soc. China 20, 201 (2010).
V.E. Buchanan, Surf. Coat. Technol. 203, 3638 (2009).
J. Cheng, X. Liang, B. Xu, and Y. Wu, J. Non-Cryst. Solids 355, 1673 (2009).
C.A. Schuh, T.C. Hufnagel, and U. Ramamurty, Acta Mater. 55, 4067 (2007).
S. Matthews, M. Hyland, and B. James, Acta Mater. 51, 4267 (2003).
N. Hussain, K.A. Shahid, I.H. Khan, and S. Rahman, J. Oxid. Met. 41, 251 (1994).
V.N. Shukla, R. Jayaganthan, and V.K. Tewari, Adv. Mater. Res. 585, 483 (2012).
Acknowledgements
The authors would like to express their thanks to M/s Industrial Processors and Metallizers (IPM), Pvt. Ltd., New Delhi, India for providing the powders and coating facilities.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shukla, V.N., Jayaganthan, R. & Tewari, V.K. Degradation Behavior of Nanostructured Coatings Deposited by High-Velocity Arc Spraying Process in an Actual Environment of a Coal-Fired Boiler. JOM 65, 784–791 (2013). https://doi.org/10.1007/s11837-013-0612-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-013-0612-5