Abstract
Tensile tests at different strain rates (0.0002, 0.002, 0.02, 1000 and 3000 s–1) were carried out for 7N01 aluminum alloy. Low strain rate experiments (0.0002, 0.002 and 0.02 s–1) were conducted using an electronic mechanical universal testing machine, while high strain rate experiments (1000, 3000 s-1) were carried out through a split Hopkinson tensile bar. The experimental results showed that 7N01 aluminum alloy is strain rate sensitive. By introducing a correction scheme of the strain rate hardening coefficient, a modified Johnson–Cook model was proposed to describe the flow behaviors of 7N01 aluminum alloy. The proposed model fitted the experimental data better than the original Johnson–Cook model in plastic flow under dynamic condition. Numerical simulations of the dynamic tensile tests were performed using ABAQUS with the modified Johnson–Cook model. Digital image correlation was used together with high-speed photography to study the mechanical characters of specimen at high strain rate. Good correlations between the experiments results, numerical predictions and DIC results are achieved. High accuracy of the modified Johnson-Cook model was validated.
Similar content being viewed by others
References
BUSSADORI B P, SCHUFFENHAUER K, SCATTINA A. Modelling of CFRP crushing structures in explicit crash analysis [J]. Composites Part B: Engineering, 2014, 60(1): 725–735.
LI M T, ZHANG Y, KONG C Y. Numerical simulation of bulging process of aluminum alloy sheet [J]. Applied Mechanics & Materials, 2013, 327: 112–116.
FARUKH F, DEMIRCI E, SABUNCUOGLU B, ACAR M, POURDEYHIMI B, SILBERSCHMIDT V V. Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy [J]. Composites Part B: Engineering, 2015, 68: 327–335.
GAO C Y, ZHANG L C. Constitutive modelling of plasticity of FCC metals under extremely high strain rates [J]. International Journal of Plasticity, 2012, 32–33: 121–133.
FOLLANSBEE P S, KOCKS U F. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable [J]. Acta Metallurgica, 1988, 36(1): 81–93.
GRAY G T, CHEN S R, VECCHIO K S. Influence of grain size on the constitutive response and substructure evolution of MONEL 400 [J]. Metallurgical & Materials Transactions A, 1999, 30(5): 1235–1247.
ZERILLI F J, ARMSTRONG R W. Dislocation-mechanics-based constitutive relations for material dynamics calculations [J]. Journal of Applied Physics, 1987, 61(5): 1816–1825.
CHIOU S T, CHENG W C, LEE W S. Strain rate effects on the mechanical properties of a Fe–Mn–Al alloy under dynamic impact deformations [J]. Materials Science & Engineering A, 2005, 392: 156–162.
XIE Su-chao, ZHOU Hui. Impact characteristics of a composite energy absorbing bearing structure for railway vehicles [J]. Composites Part B: Engineering, 2014, 67: 455–463.
WAN Yu-min, ZHANG Fa, GU Bo-hong, SUN Bao-zhong, WANG You-jiang. Predicting dynamic in-plane compressive properties of multi-axial multi-layer warp-knitted composites with a meso-model [J]. Composites Part B: Engineering, 2015, 77: 278–290.
PERONI L, SCAPIN M, FICHERA C, LEHMHUS D, WEISE J, BAUMEISTER J, AVALLE M. Investigation of the mechanical behaviour of AISI 316L stainless steel syntactic foams at different strain-rates [J]. Composites Part B: Engineering, 2014, 66: 430–442.
ALEKSANDR C, IGOR T, CHERNIAEV A, TELICHEV I. Meso-scale modeling of hypervelocity impact damage in composite laminates [J]. Composites Part B: Engineering, 2015, 74: 95–103.
PERONI L, SCAPIN M, FICHERA C, LEHMHUS D, WEISE J, BAUMEISTER J, AVALLE M. Investigation of the mechanical behaviour of AISI 316L stainless steel syntactic foams at different strain-rates [J]. Composites Part B: Engineering, 2014, 66: 430–442.
VO T P, GUAN Z W, CANTWELL W J, SCHLEYER G K. Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys [J]. Composites Part B: Engineering, 2013, 44: 141–151.
MAHESHWARI A K, PATHAK K K, RAMAKRISHNAN N, NARAYAN S P. Modified Johnson–Cook material flow model for hot deformation processing [J]. Journal of Materials Science, 2010, 45(4): 859–864.
CAI J, WANG K, ZHAI P, LI F, YANG J. A modified johnson-cook constitutive equation to predict hot deformation behavior of Ti-6Al-4V alloy [J]. Journal of Materials Engineering & Performance, 2015, 24(1): 32–44.
WANG Y P, HAN C J, WANG C, LI S K. A modified Johnson–Cook model for 30Cr2Ni4MoV rotor steel over a wide range of temperature and strain rate [J]. Journal of Materials Science, 2011, 46(9): 2922–2927.
LIN Y C, CHEN X M. A combined Johnson–Cook and Zerilli–Armstrong model for hot compressed typical high-strength alloy steel [J]. Computational Materials Science, 2010, 49(3): 628–633.
WOSU S N, HUI D, DANIEL L. Hygrothermal effects on the dynamic compressive properties of graphite/epoxy composite material [J]. Composites Part B: Engineering, 2012, 43(3): 841–855.
WOSU S N, HUI D, DUTTA P K. Dynamic mixed-mode I/II delamination fracture and energy release rate of unidirectional graphite/epoxy composites [J]. Engineering Fracture Mechanics, 2005, 72(10): 1531–1558.
NWOSU S N, HUI D, DUTTA P K. Dynamic mode II delamination fracture of unidirectional graphite/epoxy composites [J]. Composites Part B: Engineering, 2003, 34(3): 303–316.
KOLSKY H. An investigation of the mechanical properties of materials at very high rates of loading [J]. Proceedings of the Physical Society: Section B, 1949, 62(11): 676–700.
QIN J G, CHEN R, WEN X J, LI Y L, LIANG M Z, LU F Y. Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading [J]. Materials Science & Engineering A, 2013, 586: 62–70.
AMBRIZ R R, FROUSTEY C, MESMACQUE G. Determination of the tensile behavior at middle strain rate of AA6061-T6 aluminum alloy welds [J]. International Journal of Impact Engineering, 2013, 60(10): 107–119.
WANG P F, XU S L, LI Z B, YANG J L, ZHANG C, ZHENG H. Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading [J]. Materials Science & Engineering A, 2015, 620: 253–261.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(51275532, U1334208) supported by the National Natural Science Foundation of China; Project(2015BAG13B01) supported by National Science and Technology Support Program, China; Project(2016YFB1200602-33) supported by the National Key R&D Program of China; Project(NCET-12-0549) supported by the New Century Excellent Talents in University, China; Project(CSUZC201527) supported by the Open-Fund for the Valuable and Precision Instruments of Central South University, China
Rights and permissions
About this article
Cite this article
Zhang, Yb., Yao, S., Hong, X. et al. A modified Johnson–Cook model for 7N01 aluminum alloy under dynamic condition. J. Cent. South Univ. 24, 2550–2555 (2017). https://doi.org/10.1007/s11771-017-3668-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-017-3668-5