Abstract
Effect of tempering temperature on the microstructure and mechanical properties of AISI 6150 steel was investigated. All samples were austenitized at 870 °C for 45 min followed by oil quenching, and then tempered at temperatures between 200 and 600 °C for 60 min. The results show that the microstructure of tempered sample at 200 °C mainly consists of tempered martensite. With increasing the tempered temperature, the martensite transforms to the ferrite and carbides. The ultimate tensile strength, the hardness and the retained austenite decrease with increasing tempered temperature, and 0.2% yield strength increases when the temperature increases from 200 to 300 °C and then decreases with increasing the temperature, but the elongation and impact energy increase with increasing the tempering temperature.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
GUO Wen-yuan, LI Jun, JIANG Xi-feng. Subcritical spheroidization of medium-carbon 50CrV4 Steel [J]. Journal of Materials Engineering Performance, 2012, 21(6): 1003–1007.
LI C S, LIU X H, WANG G D. Simulation on temperature field of 50CrV4 automobile gear bar steel in continuous rolling by FEM [J]. Journal of Materials Engineering Performance, 2002, 120(1): 26–29.
BANDYOPADHYAY N, MCMAHON C J. The micro-mechanisms of tempered martensite embrittlement in 4340 type steels [J]. Metallurgical and Materials Transactions A, 1983, 14(7): 1313–1325.
CHANG E, CHANG C Y, LIU C D. The effect of double austenitization on the mechanical properties of a 0.34C containing low-alloy Ni-Cr-Mo-V steels [J]. Metallurgical and Materials Transactions A, 1994, 25(7): 545–555.
JENA P K, MISHRA BIDYAPATI, RAMESHBADU M, BAHU ARVINDHA, SINGH A K, SIVAKUMAR K, BHAT BALAKRISHNA T. Effect of heat treatment on mechanical and ballistic properties of a high strength armour steel [J]. International Journal of Impact Engineering, 2010, 37(3): 242–249.
SAYED A A, KHEIRANDISH S H. Effect of the tempering temperature on the microstructure and mechanical properties of dual phase steels [J]. Materials Science and Engineering A, 2012, 532(1): 21–25.
QIN B, WANG Z Y, SUN Q S. Effect of tempering temperature on properties of 0Cr16Ni5Mo stainless steel [J]. Materials Characterization, 2008, 59(8): 1096–1100.
SALEMI A, ABDOLLAH-ZADEH A. The effect of tempering temperature on the mechanical properties and fracture morphology of a NiCrMoV steel [J]. Materials Characterization, 2008, 59(4): 484–487.
NASERY ISFAHANY A, SAGHAFIAN H, BORHANI G. The effect of heat treatment on the mechanical properties and corrosion behavior of AISI420 martensitic stainless steel [J]. Journal of Alloys and Compounds, 2011, 509(9): 3931–3936.
LI Yang-hua, ZHAO Yan-kuo, WU Yue, LIU Jiao-jiao, LI Hong-ying. Effects of tempering temperature on microstructures and properties of V150 casing and tubing with ultra-high strength and toughness [J]. Journal of Central South University: Science and Technology, 2012, 43(6): 2128–2136. (in Chinese)
ZOU De-ning, HAN Ying, ZHANG Wei, FANG Xu-dong. Influence of tempering process on mechanical properties of 00Cr13Ni4Mo supermartensitic stainless steel [J]. Journal of Iron and Steel Research, International, 2010, 17(8): 50–54.
ANAND L, GURLAND J. Effect of internal boundaries on the yield strengths of spheroidized steel [J]. Metallurgical and Materials Transactions A, 1976, 7(2): 191–197.
JENA P K, SIVAKUMAR K, BHAT T B. Effect of heat treatment on mechanical and ballistic properties of ultra high strength DMR-700 steel [J]. Metals Materials and Processes, 2007, 19(1/4): 339–346.
DARWISH F A, PEREIRA L, GRACA M L. On the tempered martensite embrittlement in AISI 4140 low alloy steel [J]. Materials Science and Engineering A, 1991, 132(1): 5–9.
ZHANG Z, DELAGNES D, BERNHART G. Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements [J]. Materials Science and Engineering A, 2004, 380(1/2): 222–230.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(2011BAE13B03) supported by the National Key Technology R&D Program of China
Rights and permissions
About this article
Cite this article
Li, Hy., Hu, Jd., Li, J. et al. Effect of tempering temperature on microstructure and mechanical properties of AISI 6150 steel. J. Cent. South Univ. 20, 866–870 (2013). https://doi.org/10.1007/s11771-013-1559-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-013-1559-y