Abstract
A model of nitrogen alloying of carbon or stainless steels by bottom nitrogen gas injection in converters or ladles has been developed. It combines a description of the local kinetics in terms of a mixed-control interfacial reaction/liquid-phase mass transfer model and a hydrodynamics description of the plumes that constitute the active reaction zones. It has been validated from special trials made in the converter and ladle at atmospheric pressure or under vacuum for carbon steels and in the ladle for stainless steels with ultra high N contents.
Similar content being viewed by others
References
G.R. Belton: Metall., Trans. B, 1993, vol. 24B, pp. 241–58.
H. Lachmund, B. Prothmann, D. Huin, H. Saint Raymond, and H. Gaye: Rev. Métall.-CIT, 1988, No. 4, pp. 487–99.
D. Huin, M. Bobadilla, H. Gaye, P. Dor, and L. Coudreuse: in Franco-Swedish Symp. on Stainless Steels, Tool Steels, and Powder Metallurgy, Le Creusot, France, Sept. 1998.
B. Bergmann, N. Bannenberg, and H. Gaye: La Rev. Métall.-CIT, 1989, No. 11, pp. 907–18.
H. Gaye, N. Bannenberg, and B. Bergmann: Steel Res., 1992, vol. 63, pp. 431–37.
H. Gaye, D. Huin, N. Bannenberg, and B. Bergmann: Supplément Revue “i.e., Vide, les Couches Minces,” 261, Mars-Avril 1992, pp. 50–54.
A.J. Berthet, G. Denier, and H. Gaye: Proc. 3rd Int. Iron and Steel Congr., Chicago, IL, April 16–20, 1978, ASM, Metals Park, OH, 1978, pp. 201–08.
G.R. Belton: Can. Metall. Q., 1982, vol. 21, pp. 137–45.
J.H. Swisher and E.T. Turkdogan: Trans. TMS-AIME, 1967, vol. 239, pp. 602–10.
R.J. Fruehan and L.J. Martonik: Metall. Trans. B, 1980, vol. 11B, pp. 615–21.
R.J. Fruehan and L.J. Martonik: Metall. Trans. B, 1981, vol. 12B, pp. 379–84.
T. Choh, T. Takebe, and M. Inouye: Tetsu-to-Hagané, 1981, vol. 67, pp. 2665–74.
P.C. Glaws and R.J. Freuhan: Metall. Trans. B, 1985, vol. 16B, pp. 551–59.
B.R. Benner and N.A.D. Parlee: Metall. Trans., 1973, vol. 4, pp. 370–73.
J.Y. Lee: Ph.D. Thesis, Stanford University, Stanford, CA; 1971.
M. Iguchi, Z.-I. Morita, H. Tokunaga, H. Tatemichi, Y. Sakamoto, and S. Takagi: Tetsu-to-Hagané, 1993, vol. 79, pp. 561–68.
M. Sano and K. Mori: Trans. Iron Steel Inst. Jpn., 1983, vol. 23, pp. 169–75.
G.B. Wallis: International Developments in Heat Transfer, ASME, Fairfield, NJ, 1963, pp. 319–40.
P.E. Anagbo, J.K. Brimacombe, and A.H. Castillejos: Can. Met. Qt., 1989, vol. 28, pp. 323–30.
M. Sano and K. Mori: Trans. Iron Steel Inst. Jpn., 1980, vol. 20, pp. 675–81.
M. Sano, H. Makino, Y. Ozawa, and K. Mori: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 298–304.
R.J. Fruehan, D. Goldstein, B. Sarma, S.R. Story, P.C. Glaws, and H.U. Pasewicz: Belton Memorial Symp. Proc., Sydney, Australia, Jan. 10–11, 2000, ISS, Warrendale, PA, 2000, pp. 3–30.
H. Wada and R.D. Pehlke: Metall. Trans. B, 1977, vol. 8B, pp. 443–50.
H. Wada and R.D. Pehlke: Metall. Trans. B, 1977, vol. 8B, pp. 675–82.
K. Frisk: Ph.D. Thesis, Royal Institute of Technology, Stockholm, 1990.
Author information
Authors and Affiliations
Additional information
This article is based on a presentation made in the “Geoffrey Belton Memorial Symposium,” held in January 2000, in Sydney, Australia, under the joint sponsorship of ISS and TMS.
Rights and permissions
About this article
Cite this article
Gaye, H., Huin, D. & Riboud, P.V. Nitrogen alloying of carbon and stainless steels by gas injection. Metall Mater Trans B 31, 905–912 (2000). https://doi.org/10.1007/s11663-000-0066-3
Issue Date:
DOI: https://doi.org/10.1007/s11663-000-0066-3