Avoid common mistakes on your manuscript.
1 Correction to: Metallurgical and Materials Transactions A Volume 50A, August 2019 https://doi.org/10.1007/s11661-019-05244-7
In the original article, there is an error in Figure 1. The unit of Specific strength should be MPa/(g·cm−3). Following is the corrected Figure 1.
Specific strength vs service temperature for typical structural materials (data excerpted from References 24 and 25)
On page 3636 of the original article, the orientation relationship between TiB and α-Ti should be corrected to \( \left( {201} \right)_{\text{TiB}} \parallel \left( {\overline{1} 110} \right)_{{\alpha - {\text{Ti}}}} \), \( \left[ {11\overline{2} } \right]_{\text{TiB}} \parallel \left[ {0001} \right]_{{\alpha - {\text{Ti}}}} \)
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wei, S., Huang, L., Li, X. et al. Correction to: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures. Metall Mater Trans A 51, 1437 (2020). https://doi.org/10.1007/s11661-019-05606-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-019-05606-1