Abstract
The present work evaluates the SSC susceptibility of linepipe steel weld metals produced with various microstructures consisting of different ratios of intragranular (acicular) ferrite and grain boundary ferrite. It is shown that weld metal with high fractions of intragranular ferrite and low grain boundary ferrite passed SSC tests even though their hardness exceeded 250 HV, the widely accepted guideline to prevent SSC fracture initiation. Using a novel combination of hydrogen microprinting combined with SEM and TEM electron microscopy analysis techniques, the intragranular ferrite grain boundaries are shown to provide key hydrogen trapping sites which consist of fine grains and finely dispersed nano-scale carbide precipitates. The presence of a high fraction of trapping sites is suggested to account for the good SSC resistance coupled with high hardness, while increased grain boundary ferrite led to rejection during SSC testing due to inferior fracture toughness associated with coarser grains.
Similar content being viewed by others
References
NACE MR0175/ISO 15156 Petroleum and Natural Gas Industries—Materials for Use in H2S—Containing Environments in Oil and Gas Production
European Federation of Corrosion Publication Number 16—Guidelines on Materials Requirements for Carbon and Low Alloy Steels for H2S-Containing Environments in Oil and Gas Production
B. Beidokhiti, P. He, A. H. Kokabi and A. Dolati, Material Science and Technology, 2017, vol. 33, no. 4, pp. 408-414.
G.M. Omweg, G. S. Frankel, W.A. Bruce, J.E. Ramirez, and G. Koch, Corrosion, 2003, vol. 59, no.7, pp. 640-653.
F. Huang, S. Liu, J. Liu, K. G. Zhang, and T. H. Xi, Materials Science & Engineering A, 2014, vol. 591, pp. 159-166
L. Gan, F. Huang, X. Zhao, J. Liu, and F. F. Cheng. International Journal of Hydrogen Energy, 2017, doi:10.1016/j.ijhydene.2017.11.155.
H. Asahi, and M. Ueno, ISIJ International, 1994, vol. 34, no.3, pp. 290-294.
H. Asahi, and M. Ueno, and T Yonezawa, Corrosion, 1994, vol.50, no.7, pp. 537-545.
T. Sourmail and G. Abington: International Corrosion Conference, NACE, 2007, paper 07104.
T. Omura, K. Kobayashi, and M. Ueda: International Corrosion Conference, NACE, 2009, paper 09102.
K. Kobayashi, T. Omura, N. Takahashi, I. Minato, and A. Yamamoto: Proceedings of the 8th International Pipeline Conference, IPC2010, 2010, paper 31106.
M. Al-Mansour, A.M.Alfantazi, and M. El-boujdaini, Materials and Design, 2009, vol.30, pp. 4088-4094
B. Beidokhti, A. Dolati, and A.H. Koukabi, Materials Science and Engineering, 2009, 507A(1), 167-173.
T. Kasuya, J. Kobayashi, S. Ohkita, and M. Fuji, Science and Technology of Welding and Joining, 1998 vol. 3, no.1, pp. 25-32.
S.H. Wang, W.C. Luu, K.F. Ho, and J.K. Wu, Materials Chemistry and Physics, 2003, vol. 77, no. 2, pp. 447-454.
ASTM G39: Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion test Specimens. ASTM, West Conshohocken, 2016
J. Ovejero-García, Journal of Materials Science, 1985, vol. 20, no. 7, pp. 2623-2629.
K. Ichitani, M. Kanno, and S. Kuramoto, ISIJ international, 2003, vol. 43, no. 4, pp. 496-504.
K. Ichitani, S. Kuramoto, and M. Kanno, Corrosion science, 2003, vol. 45, no. 6, pp. 1227-1234.
K. Ichitani, and M. Kanno, Science and Technology of Advanced Materials, 2003, vol.4, no.6, pp. 545-551.
M. Koyama, D. Yamasaki, T. Nagashima, C. C. Tasan, and K. Tsuzaki, Scripta Materialia, 2017, vol.129, pp48-51.
M.C. Zhao, M. Liu, A. Atrens, Y.Y. Shan, and K. Yang, Materials Science and Engineering, 2008, 478A(1-2), 43-47.
M. C. Zhao, and K. Yang, Scripta Materialia, 2005, vol.52, pp. 881-886.
H.F. Lopez, R. Raghunath, J. L. Albarran, and L. Martinez, Metallurgical and Materials Transactions A, 1996, vol.27, pp. 3601-3611.
The Japan Welding Engineering Society. http://www-it.jwes.or.jp/weld_simulator/en/cal4.jsp. Accessed 5 Aug 2018.
H. Asahi, Zairyo-to-Kankyo, 2000, 49(4), 201-208
M. Hamada, Journal of the Japan Welding Society, 2011, 49(4), pp. 201-208 (Japanese)
Acknowledgments
The authors are grateful to CanmetMATERIALS, Nippon Steel & Sumikin Engineering Co., Ltd. (Japan), TransCanada Pipelines, and the Natural Sciences and Engineering Research Council (NSERC) of Canada for supporting this research. The EM research described in this paper was performed at the Canadian Centre for Electron Microscopy at McMaster University, which is supported by NSERC and other government agencies.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted June 8, 2018.
Rights and permissions
About this article
Cite this article
Kisaka, Y., Senior, N. & Gerlich, A.P. A Study on Sulfide Stress Cracking Susceptibility of GMA Girth Welds in X80 Grade Pipes. Metall Mater Trans A 50, 249–256 (2019). https://doi.org/10.1007/s11661-018-4966-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-018-4966-8