Abstract
The effect of interfacial modification on flexural strength of epoxy composites filled with modified ZrB2-Al2O3 composite fillers was investigated in order to explore the stress distribution of modified composites under external load. The mechanical performance of epoxy composites filled with 0 vol%, 1 vol%, 3 vol% and 5 vol% unmodified and modified ZrB2-Al2O3 fillers was characterized by three point bending (TPB) tests. The fracture surfaces of epoxy composites were observed by scanning electronic microscope (SEM). The results showed that the epoxy composite reinforced by 1 vol% modified fillers exhibited the optimal mechanical performance. According to the Von Mises stress contours simulated by finite element models (FEM) and the SEM images, it was shown that the modified ZrB2-Al2O3 multiphase fillers could homogenize the stress in the epoxy composites due to the transition effect resulted from the interfacial modification layers on the surfaces of multiphase fillers. It contributed to the improvement of mechanical performance of epoxy composites further.
Similar content being viewed by others
References
Wetzel B, Haupert F, Zhang M Q. Epoxy Nanocomposites with High Mechanical and Tribological Performance[J]. Compos. Sci. Technol., 2003, 63: 2055–2067
Chen P, Li J, Zhang L. Analysis of Mechanical Characteristics of Fly Ash Cenospheres Reinforced Epoxy Composites[J]. J. Wuhan Univ. Technol.-Mater. Sci. Ed, 2018, 33: 139–145
Zhou Y, White E, Hosur M, et al. Effect of Particle Size and Weight Fraction on the Flexural Strength and Failure Mode of TiO2 Particles Reinforced Epoxy[J]. Mater. Lett., 2010, 64: 806–809
Amaro A M, Bernardo L, Pinto D G, et al. Effect of Irregular Shaped Nanoalumina on the Enhancement of Mechanical Properties of Epoxy Resin Nanocomposites Using DDM as Hardener[J]. Compos. Part B, 2016, 84: 17–24
Wu Y C, Yu Z Q. Thermal Conductivity of in situ Epoxy Composites Filled with ZrB2 Particles[J]. Compos. Sci. Technol., 2015, 107: 61–66
Yu Z Q, Wu Y C, Wei B, et al. Boride Ceramics Covalent Functionalization and Its Effect on the Thermal Conductivity of Epoxy Composites[J]. Mater. Chem. Phys., 2015, 164: 214–222
Wu Y C, Yu Z Q, He Y N, et al. Heat Conduction Models of Interfacial Effects for TiB2-Al2O3/Epoxy Composites[J]. Mater. Chem. Phys., 2015, 162: 182–187
Ivanez I, Santiuste C, Sanchez-Saez S. FEM Analysis of Dynamic Flexural Behaviour of Composite Sandwich Beams with Foam Core[J]. Compos. Struct., 2010, 92: 2285–2291
He Y N, Yu Z Q. Effect of Surface Organic Functional Modification of ZrB2 Nanosize Multiphase Ceramics on the Thermal Properties of Its Composites[J]. Chem. J. Chin. Univ., 2015, 36: 1846–1852
Landel R, Nielsen L. Mechanical Properties of Polymers and Composites[M]. Boca Raton: CRC Press, 1993
Nicolais L, Narkis M. Stress-Strain Behavior of Styrene-Acrylonitrile/Glass Bead Composites in the Glassy Region[J]. Polym. Eng. Sci., 1971, 11: 194–199
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by National Natural Science Foundation of China (No. 51273044)
Rights and permissions
About this article
Cite this article
Wu, Y., He, Y. & Yu, Z. Flexural Stress Homogenization Effects of Interfacial Transition Layers in Modified ZrB2-Al2O3/Epoxy Composites. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 34, 1003–1007 (2019). https://doi.org/10.1007/s11595-019-2150-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-019-2150-7