Abstract
Enabled by advancements in multi-material additive manufacturing, lightweight lattice structures consisting of networks of periodic unit cells have gained popularity due to their extraordinary performance and wide array of functions. This work proposes a density-based robust topology optimization method for meso- or macroscale multi-material lattice structures under any combination of material and load uncertainties. The method utilizes a new generalized material interpolation scheme for an arbitrary number of materials, and employs univariate dimension reduction and Gauss-type quadrature to quantify and propagate uncertainty. By formulating the objective function as a weighted sum of the mean and standard deviation of compliance, the tradeoff between optimality and robustness can be studied and controlled. Examples of a cantilever beam lattice structure under various material and load uncertainty cases exhibit the efficiency and flexibility of the approach. The accuracy of univariate dimension reduction is validated by comparing the results to the Monte Carlo approach.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chen Y, Li T, Scarpa F, et al. Lattice metamaterials with mechanically tunable Poisson’s ratio for vibration control. Physical Review Applied, 2017, 7(2): 024012
Chen D, Zheng X. Multi-material additive manufacturing of metamaterials with giant, tailorable negative Poisson’s ratios. Scientific Reports, 2018, 8(1): 9139
Yuan S, Shen F, Bai J, et al. 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization. Materials & Design, 2017, 120: 317–327
Yu K, Fang N X, Huang G, et al. Magnetoactive acoustic metamaterials. Advanced Materials, 2018, 30(21): 1706348
Bilal O R, Ballagi D, Daraio C. Architected lattices for simultaneous broadband attenuation of airborne sound and mechanical vibrations in all directions. 2018, arXiv:1809.01252v1
Shan S, Kang S H, Raney J R, et al. Multistable architected materials for trapping elastic strain energy. Advanced Materials, 2015, 27(29): 4296–4301
Maloney K J, Fink K D, Schaedler T A, et al. Multifunctional heat exchangers derived from three-dimensional micro-lattice structures. International Journal of Heat and Mass Transfer, 2012, 55(9–10): 2486–2493
Son K N, Weibel J A, Kumaresan V, et al. Design of multifunctional lattice-frame materials for compact heat exchangers. International Journal of Heat and Mass Transfer, 2017, 115(Part A): 619–629
Brennan-Craddock J, Brackett D, Wildman R, et al. The design of impact absorbing structures for additive manufacture. Journal of Physics: Conference Series, 2012, 382: 012042
Ozdemir Z, Tyas A, Goodall R, et al. Energy absorption in lattice structures in dynamics: Nonlinear FE simulations. International Journal of Impact Engineering, 2017, 102: 1–15
Habib F N, Iovenitti P, Masood S H, et al. Fabrication of polymeric lattice structures for optimum energy absorption using multi jet fusion technology. Materials & Design, 2018, 155: 86–98
Stankovic T, Mueller J, Egan P, et al. A generalized optimality criteria method for optimization of additively manufactured multimaterial lattice structures. Journal of Mechanical Design, 2015, 137(11): 111405
Moon S K, Tan Y E, Hwang J, et al. Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures. International Journal of Precision Engineering and Manufacturing-Green Technology, 2014, 1(3): 223–228
Terriault P, Brailovski V. Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing. Finite Elements in Analysis and Design, 2018, 138: 1–11
Murr L E, Gaytan S M, Medina F, et al. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010, 368(1917): 1999–2032
Parthasarathy J, Starly B, Raman S. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications. Journal of Manufacturing Processes, 2011, 13(2): 160–170
Zhang X Z, Leary M, Tang H P, et al. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges. Current Opinion in Solid State and Materials Science, 2018, 22(3): 75–99
Saxena K K, Das R, Calius E P. 3D printable multimaterial cellular auxetics with tunable stiffness. 2017, arXiv:1707.04486
Wang M Y, Wang X. “Color” level sets: A multi-phase method for structural topology optimization with multiple materials. Computer Methods in Applied Mechanics and Engineering, 2004, 193(6–8): 469–496
Zhou S, Wang M Y. Multimaterial structural topology optimization with a generalized Cahn-Hilliard model of multiphase transition. Structural and Multidisciplinary Optimization, 2007, 38: 89–111
Hiller J D, Lipson H. Multi material topological optimization of structures and mechanisms. In: Proceedings of the 11th Annual Conference on Genetic and Evolutionary Computation. Montreal: ACM, 2009, 1521–1528
Ramani A. Multi-material topology optimization with strength constraints. Structural and Multidisciplinary Optimization, 2011, 43(5): 597–615
Zhang X S, Paulino G H, Ramos A S. Multi-material topology optimization with multiple volume constraints: A general approach applied to ground structures with material nonlinearity. Structural and Multidisciplinary Optimization, 2018, 57(1): 161–182
Bendsøe M P, Sigmund O. Topology Optimization: Theory, Methods, and Applications. Berlin: Springer, 2004
Sigmund O. Morphology-based black and white filters for topology optimization. Structural and Multidisciplinary Optimization, 2007, 33(4–5): 401–424
Stegmann J, Lund E. Discrete material optimization of general composite shell structures. International Journal for Numerical Methods in Engineering, 2005, 62(14): 2009–2027
Gaynor A, Meisel N A, Williams C B, et al. Multiple-material topology optimization of compliant mechanisms created via polyjet 3D printing. Journal of Manufacturing Science and Engineering, 2014, 136(6): 061015
Yin L, Ananthasuresh G K. Topology optimization of compliant mechanisms with multiple materials using a peak function material interpolation scheme. Structural and Multidisciplinary Optimization, 2001, 23(1): 49–62
Zuo W, Saitou K. Multi-material topology optimization using ordered SIMP interpolation. Structural and Multidisciplinary Optimization, 2017, 55(2): 477–491
Sing S L, Wiria F E, Yeong W Y. Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior. Robotics and Computer-Integrated Manufacturing, 2018, 49: 170–180
Ahmadi S M, Hedayati R, Ashok Kumar Jain R K, et al. Effects of laser processing parameters on the mechanical properties, topology, and microstructure of additively manufactured porous metallic biomaterials: A vector-based approach. Materials & Design, 2017, 134: 234–243
Park S I, Rosen D W, Choi S, et al. Effective mechanical properties of lattice material fabricated by material extrusion additive manufacturing. Additive Manufacturing, 2014, 1–4: 12–23
Chen S, Chen W. A new level-set based approach to shape and topology optimization under geometric uncertainty. Structural and Multidisciplinary Optimization, 2011, 44(1): 1–18
Jansen M, Lombaert G, Diehl M, et al. Robust topology optimization accounting for misplacement of material. Structural and Multidisciplinary Optimization, 2013, 47(3): 317–333
Schevenels M, Lazarov B S, Sigmund O. Robust topology optimization accounting for spatially varying manufacturing errors. Computer Methods in Applied Mechanics and Engineering, 2011, 200(49–52): 3613–3627
Jalalpour M, Tootkaboni M. An efficient approach to reliabilitybased topology optimization for continua under material uncertainty. Structural and Multidisciplinary Optimization, 2016, 53(4): 759–772
Changizi N, Jalalpour M. Robust topology optimization of frame structures under geometric or material properties uncertainties. Structural and Multidisciplinary Optimization, 2017, 56(4): 791–807
Alvarez F, Carrasco M. Minimization of the expected compliance as an alternative approach to multiload truss optimization. Structural and Multidisciplinary Optimization, 2005, 29(6): 470–476
Dunning P D, Kim H A, Mullineux G. Introducing loading uncertainty in topology optimization. AIAA Journal, 2011, 49(4): 760–768
Deng J, Chen W. Concurrent topology optimization of multiscale structures with multiple porous materials under random field loading uncertainty. Structural and Multidisciplinary Optimization, 2017, 56(1): 1–19
Rahman S, Xu H. A univariate dimension-reduction method for multi-dimensional integration in stochastic mechanics. Probabilistic Engineering Mechanics, 2004, 19(4): 393–408
Gibiansky L V, Sigmund O. Multiphase composites with extremal bulk modulus. Journal of the Mechanics and Physics of Solids, 2000, 48(3): 461–498
Yin X, Lee S, Chen W, et al. Efficient random field uncertainty propagation in design using multiscale analysis. Journal of Mechanical Design, 2009, 131(2): 021006
Lee S H, Chen W. A comparative study of uncertainty propagation methods for black-box-type problems. Structural and Multidisciplinary Optimization, 2009, 37(3): 239–253
Lee S H, Chen W, Kwak B M. Robust design with arbitrary distributions using Gauss-type quadrature formula. Structural and Multidisciplinary Optimization, 2009, 39(3): 227–243
Zhao Y G, Ono T. Moment methods for structural reliability. Structural Safety, 2001, 23(1): 47–75
Svanberg K. The method of moving asymptotes—A new method for structural optimization. International Journal for Numerical Methods in Engineering, 1987, 24(2): 359–373
Svanberg K. MMA and GCMMA—Two Methods for Nonlinear Optimization. Technical Report. 2007
Acknowledgements
Ms. Yu-Chin Chan would like to acknowledge support from the Digital Manufacturing and Design Innovation Institute (DMDII) through award number 15-07-07. Additionally, this material is based upon work supported by the National Science Foundation Graduate Research Fellowship Program under Grant No. DGE-1842165. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://doi.org/creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Chan, YC., Shintani, K. & Chen, W. Robust topology optimization of multi-material lattice structures under material and load uncertainties. Front. Mech. Eng. 14, 141–152 (2019). https://doi.org/10.1007/s11465-019-0531-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-019-0531-4