Skip to main content
SpringerLink
Log in

Unified modeling of high temperature deformations of a Ni-based polycrystalline wrought superalloy under tension-compression, cyclic, creep and creep-fatigue loadings

  • Article
  • Published:
Science China Technological Sciences Aims and scope Submit manuscript

Abstract

The complex deformation behaviors under tension-compression, cyclic, creep and creep-fatigue loadings of a nickel-base polycrystalline wrought superalloy at 650°C and 700°C were experimentally investigated. To uniformly simulate the complex deformation behaviors, the modified viscoplastic constitutive model combined with both the Kachanov damage evolution equation and the Ohno-Wang modification was formulated on the basis of the Chaboche theory. The simulated results on tension-compression behavior, cyclic viscoplastic and creep deformations showed comprehensive predicting ability. With the obtained material parameters, the deformations in creep-fatigue interaction under three dwell types were simulated and the capability of the modified model was further verified with good accuracy.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Harrison W, Whittaker M, Williams S. Recent advances in creep modelling of the Nickel base superalloy, alloy 720Li. Mater, 2013, 6: 1118–1137

    Article  Google Scholar 

  2. Unocic R R, Viswanathan G B, Sarosi P M, et al. Mechanisms of creep deformation in polycrystalline Ni-base disk superalloys. Mater Sci Eng A, 2008, 483: 25–32

    Article  Google Scholar 

  3. Zrník J, Semeňák J, Vrchovinský V, et al. Influence of hold period on creep-fatigue deformation behaviour of nickel base superalloy. Mater Sci Eng A, 2001, 319: 637–642

    Article  Google Scholar 

  4. Fritzemeier L G, Tien J K. The cyclic stress-strain behavior of nickel-base superalloys-I. Polycrystals. Acta Metall, 1988, 36: 275–282

    Article  Google Scholar 

  5. Dong C L, Yu H C, Li Y, et al. Life modeling of anisotropic fatigue behavior for a single crystal nickel-base superalloy. Int J Fatigue, 2014, 61: 21–27

    Article  Google Scholar 

  6. Jiang L W, Li S S, Wu M L, et al. Effect of dendrite arm spacing and the γ′ phase size on stress rupture properties of Ni3Al-base single crystal superalloy IC6SX. Sci China Tech Sci, 2010, 53: 1460–1465

    Article  Google Scholar 

  7. Han S, Li S, Smith D J. Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys. I. Analytical identification. Mech Mater, 2001, 33: 251–266

    Article  Google Scholar 

  8. Vladimirov I N, Reese S, Eggeler G. Constitutive modelling of the anisotropic creep behaviour of nickel-base single crystal superalloys. Int J Mech Sci, 2009, 51: 305–313

    Article  MATH  Google Scholar 

  9. Liu Z L, Zhuang Z, Liu X M, et al. A dislocation dynamics based higher-order crystal plasticity model and applications on confined thin-film plasticity. Int J Plasticity, 2011, 27: 201–216

    Article  MathSciNet  Google Scholar 

  10. Han C S, Ma A, Roters F, et al. A finite element approach with patch projection for strain gradient plasticity formulations. Int J Plasticity, 2007, 23: 690–710

    Article  MATH  Google Scholar 

  11. Siddiq A, Schmauder S, Huang Y. Fracture of bicrystal metal/ceramic interfaces: A study via the mechanism-based strain gradient crystal plasticity theory. Int J Plasticity, 2007, 23: 665–689

    Article  MATH  Google Scholar 

  12. Kuroda M, Tvergaard V. On the formulations of higher-order strain gradient crystal plasticity models. J Mech Phys Solids, 2008, 56: 1591–1608

    Article  MATH  MathSciNet  Google Scholar 

  13. Guan P, Liu C C, Lv H X. Development of a unified viscoplasticity constitutive model based on classical plasticity theory. Sci China Ser-E Tech Sci, 2009, 52: 1248–1253

    Article  Google Scholar 

  14. Zhan Z, Fernando U S, Tong J. Constitutive modelling of viscoplasticity in a nickel-based superalloy at high temperature. Int J Fatigue, 2008, 30: 1314–1323

    Article  MATH  Google Scholar 

  15. China Aeronautical Materials Handbook Editorial Board. China Aeronautical Materials Handbook. 2nd ed. Beijing: Standards Press of China, 2002

    Google Scholar 

  16. Hang L, Wu X R, Huang X Y, et al. Fractographical investigation on high-cycle fatigue behavior of direct aging GH4169 superalloy. Mater Sci Forum, 2014, 789: 627–632

    Article  Google Scholar 

  17. GB/T 15248-2008. The test method for axial loading constant amplitude low-cycle fatigue of metallic materials. Beijing: Chinese National Standard Publishing House, 2008

    Google Scholar 

  18. GB/T 2039-1997. Metallic materials creep and stress-rupture test in tension. Beijing: Standard Press of China, 1997

    Google Scholar 

  19. Chaboche J L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int J Plasticity, 1989, 5: 247–302

    Article  MATH  Google Scholar 

  20. Chaboche J L. A review of some plasticity and viscoplasticity constitutive theories. Int J Plasticity, 2008, 24: 1642–1693

    Article  MATH  Google Scholar 

  21. Kachanov M. Elastic solids with many cracks and related problems. Adv Appl Mech, 1993, 30: 259–445

    Article  Google Scholar 

  22. Levenberg K. A method for the solution of certain non-linear problems in least squares. Quart Appl Math, 1944, 2: 164–168

    MATH  MathSciNet  Google Scholar 

  23. Kang G. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation. Mech mater, 2004, 36: 299–312

    Article  Google Scholar 

  24. Yaguchi M, Takahashi Y. Ratchetting of viscoplastic material with cyclic softening, part 2: Application of constitutive models. Int J Plasticity, 2005, 21: 835–860

    Article  MATH  Google Scholar 

  25. Kang G Z. Ratchetting: Recent progresses in phenomenon observation, constitutive modeling and application. Int J Fatigue, 2008, 30: 1448–1472

    Article  Google Scholar 

  26. Tong J, Zhan Z L, Vermeulen B. Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using chaboche constitutive equations. Int J Fatigue, 2004, 26: 829–837

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Energy and Power Engineering, Beihang University, Beijing, 100191, China

    Jia Huang, DuoQi Shi & XiaoGuang Yang

  2. Beijing Institute of Aeronautical Materials, Beijing, 100095, China

    HuiChen Yu & ChengLi Dong

Authors
  1. Jia Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. DuoQi Shi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. XiaoGuang Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. HuiChen Yu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. ChengLi Dong
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to DuoQi Shi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Huang, J., Shi, D., Yang, X. et al. Unified modeling of high temperature deformations of a Ni-based polycrystalline wrought superalloy under tension-compression, cyclic, creep and creep-fatigue loadings. Sci. China Technol. Sci. 58, 248–257 (2015). https://doi.org/10.1007/s11431-014-5679-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-014-5679-x

Keywords

Search

Navigation