References
Antonova I V, Soots R A, Guliaev M B, et al. Electrical passivation of Si/SiGe/Si structures by 1-octadecene monolayers. Appl Phys Lett, 2007, 91: 102116
Wang F, Jin G Q, Guo X Y. Sol-gel synthesis of Si3N4 nanowires and nanotubes. Mater Lett, 2006, 60: 330–333
Kim H Y, Park J, Yang H. Synthesis of silicon nitride nanowires directly from the silicon substrates. Chem Phys Lett, 2003, 372: 269–274
Ahmad M, Zhao J, Zhang F, et al. One-step synthesis route of the aligned and non-aligned single crystalline α-Si3N4 nanowires. Sci China Ser E-Tech Sci, 2009, 52: 1–5
Antonova I V, Kagan M S, Neustroev E P, et al. Deep levels, transport and THz emission properties of SiGe/Si quantum-well structures. Sci China Ser E-Tech Sci, 2009, 52: 6–9
Xie D, Zang Y Y, Luo Y F, et al. Inducing effect of Pb(Zr0.4Ti0.6)O3 thin film derived by different processes in BiFeO3/Pb(Zr0.4Ti0.6)O3 multilayer capacitor at room temperature. Sci China Ser E-Tech Sci, 2009, 52: 10–14
Vorobiev Y V, Vieira V R, Horley P P, et al. Energy spectrum of an electron confined in the hexagon-shaped quantum well. Sci China Ser E-Tech Sci, 2009, 52: 15–18
Cho U R, Lee Y M, Kumar S, et al. Effect of Cu seed on the synthesis and characterization of FeCo alloy nano-particles by using polyol method. Sci China Ser E-Tech Sci, 2009, 52: 19–22
Guo J, Chen H J, Sun W G, et al. Comparison of short period InAs/GaSb superlattices on GaSb and GaAs substrates. Sci China Ser E-Tech Sci, 2009, 52: 23–27
Cheng W J, Ma X M. Low temperature synthesis of SiCN nanostructures. Sci China Ser E-Tech Sci, 2009, 52: 28–31
Zhu G, Zou X P, Cheng J, et al. Straight SiOx nanorod Y junctions. Sci China Ser E-Tech Sci, 2009, 52: 32–36
Bokov A A, Ye Z G. Recent progress in relaxor ferroelectrics with perovskite structure. J Mater Sci, 2006, 41: 31–52
Ren X B. Large electric-field-induced strain in ferroelectric crystals by point-defect-mediated reversible domain switching. Nat Mater, 2004, 3: 91–94
Cui J B, Soo Y C, Kandel H, et al. Investigations of ZnO thin films deposited by a reactive pulsed laser ablation. Sci China Ser E-Tech Sci, 2009, 52: 99–103
Tressaud A, Labrugère C, Durand E, et al. Switchable hydrophobichydrophilic layer obtained onto porous alumina by plasmaenhanced fluorination. Sci China Ser E-Tech Sci, 2009, 52: 104–110
Omata T, Tanaka K, Tazuke A, et al. Novel wide band gap alloyed semiconductors, x(LiGaO2)1/2-(1-x)ZnO, and fabrication of their thin films. Sci China Ser E-Tech Sci, 2009, 52: 111–115
Zhang J, Zhai J W, Jiang H T, et al. Dielectric tunable properties of BaTi4O9-doped Ba0.6Sr0.4TiO3 microwave composite ceramics. Sci China Ser E-Tech Sci, 2009, 52: 116–122
Wang C L, Li J C, Zhao M L, et al. Ferroelectric relaxor as a critical state. Sci China Ser E-Tech Sci, 2009, 52: 123–126
Cui J D, Wang Y, Dong G X, et al. Dielectric properties of BST/MZO ceramic composites. Sci China Ser E-Tech Sci, 2009, 52: 127–131
Lü Z H, Jiang D L, Zhang J X, et al. Preparation and properties of multi-wall carbon nanotube/SiC composites by aqueous tape casting. Sci China Ser E-Tech Sci, 2009, 52: 132–136
He Z L, Yu Z W, Miao H Y, et al. Preparation of TiO2 thin film by the LPD method on functionalized organic self-assembled monolayers. Sci China Ser E-Tech Sci, 2009, 52: 137–140
Wang L X, Liu R, Melnik R V N. Modeling large reversible electricfield-induced strain in ferroelectric materials using 90° orientation switching. Sci China Ser E-Tech Sci, 2009, 52: 141–147
Pan F S, Yang M B, Zhang D F. Research and development of wrought magnesium alloys in China. Mater Sci Forum, 2005, 488–489(2): 413–418
Tang A T, Pan F S, Yang M B, et al. Mechanical properties and microstructure of magnesium-aluminum based alloys containing strontium. Mater Trans, 2008, 49(6): 1203–1211
Lin J B, Peng L M, Wang Q D, et al. Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature. Sci China Ser E-Tech Sci, 2009, 52: 161–165
Fechner D, Blawert C, Hort N, et al. Recycling of magnesium drive train components. Sci China Ser E-Tech Sci, 2009, 52: 148–154
Tang A T, Liu B, Pan F S, et al. An improved neural network model for prediction of mechanical properties of magnesium alloys. Sci China Ser E-Tech Sci, 2009, 52: 155–160
Yan H, Chen R S, Han E H. Superplasticity of Mg-5.8Zn-1Y-Zr alloy sheet fabricated by combination of extrusion and hot-rolling processes. Sci China Ser E-Tech Sci, 2009, 52: 166–171
Guo Z P, Xiong S M, Liu B C, et al. Understanding of the influence of process parameters on the heat transfer behavior at the metal/die interface in high pressure die casting process. Sci China Ser E-Tech Sci, 2009, 52: 172–175
Xin R L, Wang B S, Chen X P, et al. Examination of dynamic recrystallization during compression of AZ31 magnesium. Sci China Ser E-Tech Sci, 2009, 52: 176–179
Le Q C, Zhang Z Q, Cui J Z. Effects of electromagnetic field and lubricate condition on the surface quality of magnesium alloy billet during LFEC processing. Sci China Ser E-Tech Sci, 2009, 52: 180–185
Jiang J, Godfreyb A, Liu Q. Microstructure and texture evolution during warm compression of the magnesium alloy AZ31. Sci China Ser E-Tech Sci, 2009, 52: 186–189
Law C W, Lau K M, Fung M K, et al. Effective organic-based connection unit for stacked organic light-emitting devices. Appl Phys Lett, 2006, 89(13): 133511
Lee T W, Noh T Y, Choi B K, et al. High-efficiency stacked white organic light-emitting diodes. Appl Phys Lett, 2008, 92(4): 043301
Niu L B, Guan Y X, Ren Y, et al. Highly efficient stacked organic light-emitting devices employing a novel intermediate layer. Sci China Ser E-Tech Sci, 2009, 52: 95–98
Sarkar J, Huang T H, Wang L P, et al. A combinatorial approach of developing alloy thin films using co-sputtering technique for displays. Sci China Ser E-Tech Sci, 2009, 52: 79–87
Chen J L, Chen D, Chen Z H. Optimization of the process for preparing Al-doped ZnO thin films by sol-gel method. Sci China Ser E-Tech Sci, 2009, 52: 88–94
Lee Y W, Kim H J, Park J W, et al. Adsorption and reaction behaviour for the simultaneous adsorption of NO-NO2 and SO2 on activated carbon impregnated with KOH. Carbon, 2003, 41: 1881–1888
Sumathi S, Bhatia S, Lee K T, et al. Performance of an activated carbon made from waste palm shell in simultaneous adsorption of SOx and NOx of flue gas at low temperature. Sci China Ser E-Tech Sci, 2009, 52: 198–203
Xie G Y, Liu Z Y, Zhu Z P, et al. Simultaneous removal of SO2 and NOx from flue gas using CuO/Al2O3 catalyst sorbent I. Deactivation of SCR activity by SO2 at low temperatures. J Catalysis, 2004, 224: 36–41
Okano S, Yamamuro S, Tanaka T. Synthesis of brookite-typed titania from titanium chloride solution. Sci China Ser E-Tech Sci, 2009, 52: 190–192
Zhang Z H, Ruan G Z, Chen Y B. Effect of the silicon powder content on the properties of Al2O3-SiC-Me composites. Sci China Ser E-Tech Sci, 2009, 52: 193–197
Du G X, Zheng S L, Ding H. Process optimization of reaction of acid leaching residue of asbestos tailing and sodium hydroxide aqueous solution. Sci China Ser E-Tech Sci, 2009, 52: 204–209
Zhang Z Z, Yang C W, Niu J J. Preparation and characterization of carbon pillared clay material. Sci China Ser E-Tech Sci, 2009, 52: 210–214
Gao F, Nie Z R, Wang Z H, et al. Characterization and normalization factors of abiotic resource depletion for life cycle impact assessment in China. Sci China Ser E-Tech Sci, 2009, 52: 215–222
Long X Y, Luo X G, Wang Y, et al. Sorption of Pb(II) from aqueous solution by konjac glucomannan beads. Sci China Ser E-Tech Sci, 2009, 52: 223–226
Gui X C, Wang K L, Wei J Q, et al. Microwave absorbing properties and magnetic properties of different carbon nanotubes. Sci China Ser E-Tech Sci, 2009, 52: 227–231
Song D Y, Inns D, Straub A, et al. Solid phase crystallized polycrystalline thin-films on glass from evaporated silicon for photovoltaic applications. Thin Solid Films, 2006, 513(1–2): 356–363
Xu Y, Gu B, Qin F W, et al. Investigation of GaN growth directly on Si (001) by ECR plasma enhanced MOCVD. Chin J Semicond, 2002, 23(12): 1238–1244
Xu Y, Gu B, Qin F W, et al. Electron cyclotron resonance plasma enhanced metalorganic chemical vapor deposition system with monitoring in situ for epitaxial growth of group-III nitrides. J Vac Sci Technol A, 2004, 22(2): 302–308
Shu Q K, Wang K L, Wei J Q, et al. Light emission of double-walled carbon nanotube filaments doped with yttrium and europium. Sci China Ser E-Tech Sci, 2009, 52: 252–255
Mi J, Liu X P, Li Z N, et al. Effects of Si and Ce on the microstructure and hydrogen storage property of Ti26.5Cr20V45Fe8.5Ce0.5 alloy. Sci China Ser E-Tech Sci, 2009, 52: 256–259
Wu A M, Deng W T, Qin F W, et al. Fabrication and its characteristics of low-temperature polycrystalline silicon thin films. Sci China Ser E-Tech Sci, 2009, 52: 260–263
Ou X Q, Xu S Z, Liang G C, et al. Effect of Fe(III) impurity on the electrochemical performance of LiFePO4 prepared by hydrothermal process. Sci China Ser E-Tech Sci, 2009, 52: 264–268
Zhang J, Shao L X. Cu2ZnSnS4 thin films prepared by sulfurizing different multilayer metal precursors. Sci China Ser E-Tech Sci, 2009, 52: 269–272
John L. Advanced aluminum and hybrid aerostructures for future aircraft. Mater Sci Forum, 2006, 519–521: 1233–1238
Warner T. Rencently-developed aluminum solutions for aerospace applications. Mater Sci Forum, 2006, 519–521: 1271–1278
Heinz A, Haszler A, Keidel C, et al. Recent development in aluminium alloys for aerospace applications. Mater Sci Eng A, 2000, 280(3): 102–107
Qu S Y, Han Y F, Kang Y W. Effects of Ti, Al and Hf on niobium silicides formation in the Nb-Si in situ composites. Sci China Ser E-Tech Sci, 2009, 52: 37–40
Zhu H L, Dahle A K, Ghosh A K. Improvement of warm formability of Al-Mg sheet alloys containing coarse second-phase particles. Sci China Ser E-Tech Sci, 2009, 52: 41–45
Papis K J M, Loeffler J F, Uggowitzer P J. Light metal compound casting. Sci China Ser E-Tech Sci, 2009, 52: 46–51
Shi X M, Yang Z X, Nguyen T A, et al. An electrochemical and microstructural characterization of steel-mortar admixed with corrosion inhibitors. Sci China Ser E-Tech Sci, 2009, 52: 52–66
Li X W, Xiong B Q, Zhang Y A, et al. Effect of one-step aging on microstructure and properties of a novel Al-Zn-Mg-Cu-Zr alloy. Sci China Ser E-Tech Sci, 2009, 52: 67–71
Wang B, Wang R X, Wu Y. The Young’s modulus prediction of random distributed short-fiber-reinforced polypropylene foams using finite element method. Sci China Ser E-Tech Sci, 2009, 52: 72–78
Kang S K, Choi W K, Yim M J, et al. Studies of the mechanical and electrical properties of lead-free solder joints. J Electron Mater, 2002, 31(11): 1292–1303
Rhee H, Guo F, Lee J G, et al. Effects of intermetallic morphology at the metallic particle/solder interface on mechanical properties of Sn-Ag-based solder joints. J Electron Mater, 2003, 32(11): 1257–1264
Zhang T, Hu D Y, Jin J H, et al. Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant. Sci China Ser E-Tech Sci, 2009, 52: 232–237
He X B, Qu X H, Ren S B, et al. Net-shape forming of composite packages with high thermal conductivity. Sci China Ser E-Tech Sci, 2009, 52: 238–242
Tai F, Guo F. Effects of particle size on the mechanical properties of particle-reinforced Sn-Ag composite solder joint. Sci China Ser E-Tech Sci, 2009, 52: 243–251
Nie J K, Guo F, Xia Z D, et al. Effects of process condition on morphologies of intermetallic compounds in Ni particle reinforced lead-free composite solder (in Chinese). New Technol New Process, 2008, (3): 95–100
Dobrzański L A. Significance of materials science for the future development of societies. J Mater Process Technol, 2006, 175: 133–148
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, J. Focuses of material science development in recent years. Sci. China Technol. Sci. 54, 1645–1648 (2011). https://doi.org/10.1007/s11431-011-4383-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-011-4383-3