Skip to main content
Log in

Thickness and component distributions of yttrium-titanium alloy films in electronbeam physical vapor deposition

  • Published:
Science in China Series E: Technological Sciences Aims and scope Submit manuscript

Abstract

Thickness and component distributions of large-area thin films are an issue of international concern in the field of material processing. The present work employs experiments and direct simulation Monte Carlo (DSMC) method to investigate three-dimensional low-density, non-equilibrium jets of yttrium and titanium vapor atoms in an electron-beams physical vapor deposition (EBPVD) system furnished with two or three electron-beams, and obtains their deposition thickness and component distributions onto 4-inch and 6-inch mono-crystal silicon wafers. The DSMC results are found in excellent agreement with our measurements, such as evaporation rates of yttrium and titanium measured in-situ by quartz crystal resonators, deposited film thickness distribution measured by Rutherford backscattering spectrometer (RBS) and surface profilometer and deposited film molar ratio distribution measured by RBS and inductively coupled plasma atomic emission spectrometer (ICP-AES). This can be taken as an indication that a combination of DSMC method with elaborate measurements may be satisfactory for predicting and designing accurately the transport process of EBPVD at the atomic level.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Wang E G. Atomic-scale study of kinetics in film growth (I). Prog Phys (in Chinese), 2003, 23(1): 1–61

    Google Scholar 

  2. Holland L, Steckelmacher W. The distribution of thin films condensed on surfaces by the vacuum evaporation method. Vacuum, 1952, 2: 346–364

    Article  Google Scholar 

  3. Behrndt K H. Thickness uniformity on rotating substrates. In: Bancroft G H, ed. Transactions of 10th National Vacuum Symposium of the American Vacuum Society, Boston, USA. New York: Macmillan Co., 1963, 379–384

    Google Scholar 

  4. Graper E B. Distribution and apparent source geometry of electron-beam-heated evaporation sources. J Vac Sci Tech, 1973, 10(1): 100–103

    Article  Google Scholar 

  5. Powell A, Minson P, Trapaga G, et al. Mathematical modeling of vapor plume focusing in electron beam evaporation. Metal Mater Trans A, 2001, 32(8): 1959–1966

    Article  Google Scholar 

  6. Fan J, Boyd I D, Shelton C. Monte Carlo modeling of electron beam physical vapor deposition of yttrium. J Vac Sci Tech A, 2000, 18(6): 2937–2945

    Article  Google Scholar 

  7. Bird G A. Molecular Gas Dynamics and the Direct Simulation of Gas Flows. Oxford: Clarendon Press, 1994

    Google Scholar 

  8. Shen C. Rarefied Gas Dynamics: Fundamentals, Simulations and Micro Flows. Berlin: Springer, 2005

    Google Scholar 

  9. Bird G A. Molecular Gas Dynamics. Oxford: Clarendon Press, 1976

    Google Scholar 

  10. Bird G A. Monte Carlo simulation in an engineering context. In: Fisher S S, ed. The 12th International Symposium on Rarefied Gas Dynamics, Charlottesville, USA. New York: American Institute of Aeronautics and Astronautics, 1981. 239–255

    Google Scholar 

  11. Koura K, Matsumoto H. Variable soft sphere molecular model for inverse-power-law or Lennard-Jones potential. Phys Fluids A, 1991, 3(10): 2459–2465

    Article  MATH  Google Scholar 

  12. Hassan H A, Hash D B. A generalized hard-sphere model for Monte Carlo simulated. Phys Fluids A, 1993, 5(3): 738–744

    Article  MATH  Google Scholar 

  13. Fan J. A generalized soft-sphere model for Monte Carlo simulation. Phys Fluids, 2002, 14(12): 4399–4405

    Article  Google Scholar 

  14. Chapman S, Cowling T G. The Mathematical Theory of Non-Linear Gases. 3rd ed. Cambridge: Cambridge University Press, 1970

    Google Scholar 

  15. Balakrishnan J, Boyd I D, Braun D G. Monte Carlo simulation of vapor transport in physical vapor deposition of titanium. J Vac Sci Tech A, 2000, 18(3): 907–916

    Article  Google Scholar 

  16. Hass D D, Marciano Y, Wadley H N G. Physical vapor deposition on cylindrical substrates. Surf Coat Tech, 2004, 185: 283–291

    Article  Google Scholar 

  17. Fan J, Boyd I D, Shelton C. Monte Carlo modeling of YBCO vapor deposition. In: Bartel T J, Gallis M A, eds. The 22nd International Symposium on Rarefied Gas Dynamics, Sydney, Australia. New York: Melville. 2001, 214–221

    Google Scholar 

  18. Fan J, Shu Y H, Liu H L, et al. Development report of multi-source electron beam physical vapor deposition (in Chinese). IMCAS STR 2005003. Institute of Mechanics, Chinese Academy of Sciences, Beijing, China, 2005

    Google Scholar 

  19. Dushman S. Scientific Foundation of Vacuum Technology. New York: John Wiley & Sons, 1962

    Google Scholar 

  20. Lu C S. Mass determination with piezoelectric quartz crystal resonators. J Vac Sci Tech, 1974, 12(1): 578–583

    Article  Google Scholar 

  21. Chu W K, Mayer J W, Nicolet M A. Backscattering Spectrometry. New York: Academic Press, 1978

    Google Scholar 

  22. Ziegler J F. Helium-stopping powers and ranges in all elements. In: The Stopping and Ranges of Ions in Matter. New York: Pergamon Press, 1977

    Google Scholar 

  23. Sun H W. Atomic Spectroscopy Analysis (in Chinese). Beijing: Higher Education Press, 2002

    Google Scholar 

  24. Thornton J A. High Rate Thick Film Growth. Ann Rev Mater Sci, 1977, 7: 239–260

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jing Fan.

Additional information

Supported by the National Natural Science Foundation of China (Grant Nos. 90205024, 10502051 and 10621202)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Li, S., Shu, Y. & Fan, J. Thickness and component distributions of yttrium-titanium alloy films in electronbeam physical vapor deposition. Sci. China Ser. E-Technol. Sci. 51, 1470–1482 (2008). https://doi.org/10.1007/s11431-008-0096-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-008-0096-7

Keywords

Navigation