Skip to main content

Advertisement

Log in

Advances on resource utilization of semi-dry desulfurization ash by thermal decomposition: a high-efficiency and low-temperature method for large-scale processing

  • Review Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

The semi-dry flue gas desulfurization ash (SFGDA) is an industrial waste generated by the semi-dry desulfurization process, and its resources have been continuously attracted attention. Through the method of heat decomposition, the SFGDA decomposed into CaO and SO2 has emerged as a prominent research topic. This paper summarizes various of research workers, who revealed that the decomposition temperature of CaSO4 in SFGDA is greater than 1678 K and 1603 K in the air atmosphere and N2 atmosphere, respectively, presenting challenges such as high energy consumption and limited economic feasibility. On the one hand, the effects of CO and C regulating the pyrolysis atmosphere on reducing the pyrolysis temperature were reviewed. On the other hand, the impact of additives such as Fe2O3 and FeS2 was considered. Ultimately, the joint effects of regulating atmosphere and additives were discussed, and an efficient and low-temperature decomposition route was obtained; adding solid C source and Fe2O3 for pyrolysis reaction, the decomposition temperature of CaSO4 can be reduced by at least 230 K and desulfurization efficiency exceeds 95% under the condition of micro-oxidizing atmosphere. Moreover, the CaO resulting from SFGDA decomposition can be further synthesized into calcium ferrite, while the enriched SO2 can be utilized for the production of industrial sulfuric acid, which holds promising prospects for large-scale industrial applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

Data availability

All data and materials used in this review are publicly available or have been cited accordingly.

References

Download references

Acknowledgements

This work was supported by the National Key R&D Program (No. 2018YFC1900605), China Baowu Low Carbon Metallurgy Innovation Foudation (No. BWLCF202118), and Hunan Province Scientific and Technological Achievements Transformation and Industrialization Program (No. 2020GK4055). We are grateful to these projects for their support.

Funding

This work was supported by the National Key R&D Program (No. 2018YFC1900605), China Baowu Low Carbon Metallurgy Innovation Foudation (No. BWLCF202118), and Hunan Province Scientific and Technological Achievements Transformation and Industrialization Program (No. 2020GK4055).

Author information

Authors and Affiliations

Authors

Contributions

Min Gan, Xiaohui fan and Lincheng Liu contributed to the conception of the study;

Lincheng Liu, Xiaohui fan, Min Gan, Zengqing Sun, Zhiyun Ji performed data collection;

Lincheng Liu, Jiaoyang Wei and Jiayi Liu contributed significantly to graphic drawing;

Lincheng Liu and Min Gan performed wrote the manuscript;

Xiaohui fan and Zengqing Sun helped perform the analysis with constructive discussions.

Corresponding author

Correspondence to Min Gan.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Responsible Editor: George Z. Kyzas

Publisher's note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, L., Fan, X., Gan, M. et al. Advances on resource utilization of semi-dry desulfurization ash by thermal decomposition: a high-efficiency and low-temperature method for large-scale processing. Environ Sci Pollut Res 30, 91617–91635 (2023). https://doi.org/10.1007/s11356-023-28818-w

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-023-28818-w

Keywords

Navigation