Abstract
The demand together with the urgency of phosphogypsum (PG) treatment will pose significant challenges for many countries. This research aims to explore the research progress of PG, including basic status, cooperation situation, research fields, and development trends, based on the Web of Science database through bibliometric analysis of publications (articles and patents) from 1990 to 2020. The results show that academic research on PG originated early, but the number of patents grew quickly. China is a global leader in terms of the number of publications and plays a significant role in international cooperation. The knowledge of PG has remained concentrated in the fields of natural radioactivity, cement paste backfilling, soil, crystal morphology, and synthetic gas. However, academic hotspots focus on the microstructure of chemical processes and various environmental impacts; patents and hot technologies are based on the production of refractory materials, ceramics, surface materials, cement mortar, and composite materials. The academic frontiers of PG will be centered on exploiting the methods of recovering rare earth elements from PG, the conditions of ion solidification/stabilization in PG, the impact of reaction conditions on product quality, and the reaction mechanism at the micro-level. The frontiers of patents need to focus on the improvement of manufacturing equipment, new wall materials, and chemically modified polymer materials. Envisaging the number of articles and patents to be published in the future, architectural research has a large room for improvement. This paper conducts an in-depth analysis of PG and provides information on the technological development prospects and opportunities, which is helpful for researchers engaged in PG management.
Similar content being viewed by others
References
Attallah MF, Metwally SS, Moussa SI, Soliman MA (2019) Environmental impact assessment of phosphate fertilizers and phosphogypsum waste: elemental and radiological effects. Microchem J 146:789–797. https://doi.org/10.1016/j.microc.2019.02.001
Beretka J, Devito B, Santoro L, Sherman N, Valenti GL (1993) Utilisation of industrial wastes and by-products for the synthesis of special cements. Resour Conserv Recycl 9(3):179–190. https://doi.org/10.1016/0921-3449(93)90002-w
Binnemans K, Jones PT, Blanpain B, Van Gerven T, Pontikes Y (2015) Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review. J Clean Prod 99:17–38. https://doi.org/10.1016/j.jclepro.2015.02.089
Bu X (n.d.), Lightweight and environmentally friendly wall material comprises e.g. phosphogypsum, iron, styrene-acrylate emulsion, magnesium chloride, fly ash, kieselguhr, kaolin, water reducing agent, methylhydroxyethyl cellulose, cement, and water. HUAXIN NEW WALL MATERIALS WUXUE CO LTD (HUAX-Non-standard).
Campos MP, Costa LJP, Nisti MB, Mazzilli BP (2017) Phosphogypsum recycling in the building materials industry: assessment of the radon exhalation rate. J Environ Radioact 172:232–236. https://doi.org/10.1016/j.jenvrad.2017.04.002
Canovas CR, Perez-Lopez R, Macias F, Chapron S, Nieto JM, Pellet-Rostaing S (2017) Exploration of fertilizer industry wastes as potential source of critical raw materials. J Clean Prod 143:497–505. https://doi.org/10.1016/j.jclepro.2016.12.083
Cánovas CR, Macías F, Pérez-López R, Basallote MD, Millán-Becerro R (2018) Valorization of wastes from the fertilizer industry: current status and future trends. J Clean Prod 174:678–690. https://doi.org/10.1016/j.jclepro.2017.10.293
Canovas CR, Chapron S, Arrachart G, Pellet-Rostaing S (2019) Leaching of rare earth elements (REEs) and impurities from phosphogypsum: a preliminary insight for further recovery of critical raw materials. J Clean Prod 219:225–235. https://doi.org/10.1016/j.jclepro.2019.02.104
Cardenas-Escudero C, Morales-Florez V, Perez-Lopez R, Santos A, Esquivias L (2011) Procedure to use phosphogypsum industrial waste for mineral CO2 sequestration. J Hazard Mater 196:431–435. https://doi.org/10.1016/j.jhazmat.2011.09.039
Chen CM (2004) Searching for intellectual turning points: progressive knowledge domain visualization. Proc Natl Acad Sci U S A 101:5303–5310. https://doi.org/10.1073/pnas.0307513100
Chen CM (2006) CiteSpace II: detecting and visualizing emerging trends and transient patterns in scientific literature. J Am Soc Inf Sci Technol 57(3):359–377. https://doi.org/10.1002/asi.20317
Chen QS, Zhang QL, Qi CC, Fourie A, Xiao CC (2018) Recycling phosphogypsum and construction demolition waste for cemented paste backfill and its environmental impact. J Clean Prod 186:418–429. https://doi.org/10.1016/j.jclepro.2018.03.131
Chen, L., He, Y., Shen, L., Chemical additive useful for repairing heavy metal contaminated land, comprises high alumina cement, quicklime, phosphogypsum, kaolin, sodium sulfide, iron sulfate, magnesium-containing preparation, apatite, and calcium oxide. HUNAN TAIHUA TECHNOLOGY MONITORING CO (HUNA-Non-standard)
Chernysh Y, Yakhnenko O, Chubur V, Roubik H (2021) Phosphogypsum recycling: a review of environmental issues, current trends, and prospects. Appl Sci (Basel) 11(4). https://doi.org/10.3390/app11041575
Dai QX, Ma LP, Ren NQ, Ning P, Guo ZY, Xie LG, Gao HJ (2018) Investigation on extracellular polymeric substances, sludge flocs morphology, bound water release and dewatering performance of sewage sludge under pretreatment with modified phosphogypsum. Water Res 142:337–346. https://doi.org/10.1016/j.watres.2018.06.009
Dai SL, Duan X, Zhang W (2020) Knowledge map of environmental crisis management based on keywords network and co-word analysis, 2005-2018. J Clean Prod 262:8. https://doi.org/10.1016/j.jclepro.2020.121168
El Zrelli R, Rabaoui L, Daghbouj N, Abda H, Castet S, Josse C, van Beek P, Souhaut M, Michel S, Bejaoui N, Courjault-Rade P (2018) Characterization of phosphate rock and phosphogypsum from Gabes phosphate fertilizer factories (SE Tunisia): high mining potential and implications for environmental protection. Environ Sci Pollut Res 25(15):14690–14702. https://doi.org/10.1007/s11356-018-1648-4
El Zrelli R, Rabaoui L, Abda H, Daghbouj N, Perez-Lopez R, Castet S, Aigouy T, Bejaoui N, Courjault-Rade P (2019) Characterization of the role of phosphogypsum foam in the transport of metals and radionuclides in the Southern Mediterranean Sea. J Hazard Mater 363:258–267. https://doi.org/10.1016/j.jhazmat.2018.09.083
Fahimnia B, Sarkis J, Davarzani H (2015) Green supply chain management: a review and bibliometric analysis. Int J Prod Econ 162:101–114. https://doi.org/10.1016/j.ijpe.2015.01.003
Franses PH (1994) A method to select between Gompertz and logistic trend curves. Technol Forecast Soc Chang 46(1):45–49. https://doi.org/10.1016/0040-1625(94)90016-7
Gao R (n.d.) Phosphogypsum slurry useful for wall plastering comprises phosphogypsum, rubber powder, sand, water and cellulose. China Mcc17 Group Co Ltd (Cmeg-C).
Gijbels K, Nguyen H, Kinnunen P, Schroeyers W, Pontikes Y, Schreurs S, Illikainen M (2019) Feasibility of incorporating phosphogypsum in ettringite-based binder from ladle slag. J Clean Prod 237:10. https://doi.org/10.1016/j.jclepro.2019.117793
Gong P, Shi N (n.d.) Modified phosphogypsum-based concrete prefabricated component comprises phosphogypsum, quicklime, cement, water, water reducing agent, glass fiber, fly ash, sand, and stone and prepared by mixing hosphogypsum and pre-hydrating quicklime. NANTONG GREATWALL CONSTR TECHNOLOGY CO (NANT-Non-standard).
Gong XQ, Liu JS, Zhang TT, Jiao Z (2020) Effect of modified phosphogypsum on properties of cement mortar. J Test Eval 48(4):2803–2812. https://doi.org/10.1520/jte20180702
Gu K, Chen B, Pan Y (2020) Utilization of untreated-phosphogypsum as filling and binding material in preparing grouting materials. Constr Build Mater 265:120749. https://doi.org/10.1016/j.conbuildmat.2020.120749
Guerrero JL, Perez-Moreno SM, Gutierrez-Alvarez I, Gazquez MJ, Bolivar JP (2021) Behaviour of heavy metals and natural radionuclides in the mixing of phosphogypsum leachates with seawater. Environ Pollut 268(Pt A):115843. https://doi.org/10.1016/j.envpol.2020.115843
Haque MA, Chen B, Liu YT, Shah SFA, Ahmad MR (2020) Improvement of physico-mechanical and microstructural properties of magnesium phosphate cement composites comprising with Phosphogypsum. J Clean Prod 261:15. https://doi.org/10.1016/j.jclepro.2020.121268
Haupt R, Kloyer M, Lange M (2007) Patent indicators for the technology life cycle development. Res Policy 36(3):387–398. https://doi.org/10.1016/j.respol.2006.12.004
Hentati O, Abrantes N, Caetano AL, Bouguerra S, Goncalves F, Roembke J, Pereira R (2015) Phosphogypsum as a soil fertilizer: ecotoxicity of amended soil and elutriates to bacteria, invertebrates, algae and plants. J Hazard Mater 294:80–89. https://doi.org/10.1016/j.jhazmat.2015.03.034
Huang YB, Qian JS, Kang XJ, Yu JC, Fan YR, Dang YD, Zhang WS, Wang SD (2019) Belite-calcium sulfoaluminate cement prepared with phosphogypsum: influence of P2O5 and F on the clinker formation and cement performances. Constr Build Mater 203:432–442. https://doi.org/10.1016/j.conbuildmat.2019.01.112
Huang T, Song D, Zhang S, Liu L, Zhou L, Tao J, Xu J (n.d.) Additive useful for preparing soil improvement agent comprises humus, tuff, phosphogypsum, iron powder and aluminum powder. Changshu Inst Technology (Chgs-C).
Jalali J, Gaudin P, Ammar E, Lebeau T (2020) Bioaugmentation coupled with phytoextraction for the treatment of Cd and Sr, and reuse opportunities for phosphogypsum rare earth elements. J Hazard Mater 399:11. https://doi.org/10.1016/j.jhazmat.2020.122821
Jiang Z, Zhong Y, Chen Q (n.d.) High water-resistant non-calcined phosphogypsum-based slope block material comprises e.g. phosphogypsum component, slag component, cement component, fine aggregate, coarse aggregate, water reducer component and waterproof component. In: Univ Tongji (Uytj-C)
Jin ZH, Ma BG, Su Y, Lu WD, Qi HH, Hu PH (2020) Effect of calcium sulphoaluminate cement on mechanical strength and waterproof properties of beta-hemihydrate phosphogypsum. Constr Build Mater 242:10. https://doi.org/10.1016/j.conbuildmat.2020.118198
Kim Y, Choi TY, Yan TT, Dooley K (2011) Structural investigation of supply networks: a social network analysis approach. J Oper Manag 29(3):194–211. https://doi.org/10.1016/j.jom.2010.11.001
Lambert A, Anawati J, Walawalkar M, Tam J, Azimi G (2018) Innovative application of microwave treatment for recovering of rare earth elements from phosphogypsum. ACS Sustain Chem Eng 6(12):16471–16481. https://doi.org/10.1021/acssuschemeng.8b03588
Li B, Shu JC, Yang L, Tao CY, Chen MJ, Liu ZH, Liu RL (2019a) An innovative method for simultaneous stabilization/solidification of PO43- and F- from phosphogypsum using phosphorus ore flotation tailings. J Clean Prod 235:308–316. https://doi.org/10.1016/j.jclepro.2019.06.340
Li XB, Zhou ST, Zhou YN, Min CD, Cao ZW, Du J, Luo L, Shi Y (2019b) Durability evaluation of phosphogypsum-based cemented backfill through drying-wetting cycles. Minerals. 9(5):13. https://doi.org/10.3390/min9050321
Liang Y-D, Li Y, Zhao J, Wang X-Y, Zhu H-Z, Chen X-H (2017) Study of acupuncture for low back pain in recent 20 years: a bibliometric analysis via CiteSpace. J Pain Res 10:951–964. https://doi.org/10.2147/jpr.S132808
Liu W, Liao H (2017) A bibliometric analysis of fuzzy decision research during 1970-2015. Int J Fuzzy Syst 19(1):1–14. https://doi.org/10.1007/s40815-016-0272-z
Liu C-Y, Wang J-C (2010) Forecasting the development of the biped robot walking technique in Japan through S-curve model analysis. Scientometrics. 82(1):21–36. https://doi.org/10.1007/s11192-009-0055-5
Liu SH, Fang PP, Ren J, Li SF (2020) Application of lime neutralised phosphogypsum in supersulfated cement. J Clean Prod 272:10. https://doi.org/10.1016/j.jclepro.2020.122660
Liu Y, Qiao D, He F, Su L, Liu Z, Yang Q, Pan Z, Xia Y, Qin Z, Zhang J, Ao Q, Gong G, Wang X, Zhu X, Cheng Y Preparing industrial solid waste composite material brick used in building material, involves preparing fine particles of phosphorus residue and steel residue, grinding, stirring products with phosphogypsum and alkali activator and steaming. In: GUIZHOU HONGXIN CHUANGDA ENG DETECTION (GUIZ-Non-standard)
Lu WD, Ma BG, Su Y, He XY, Jin ZH, Qi HH (2019) Preparation of alpha-hemihydrate gypsum from phosphogypsum in recycling CaCl2 solution. Constr Build Mater 214:399–412. https://doi.org/10.1016/j.conbuildmat.2019.04.148
Lu DH, Chen QL, Li CQ, Gong S (2020) Effect of potassium feldspar on the decomposition rate of phosphogypsum. J Chem Technol Biotechnol 10:374–383. https://doi.org/10.1002/jctb.6549
Luis Guerrero J, Gutierrez-Alvarez I, Mosqueda F, Jesus Gazquez M, Garcia-Tenorio R, Olias M, Pedro Bolivar J (2020) Evaluation of the radioactive pollution in the salt-marshes under a phosphogypsum stack system. Environ Pollut 258:113729. https://doi.org/10.1016/j.envpol.2019.113729
Lütke SF, Oliveira MLS, Silva LFO, Cadaval TRS, Dotto GL (2020) Nanominerals assemblages and hazardous elements assessment in phosphogypsum from an abandoned phosphate fertilizer industry. Chemosphere. 256:127138. https://doi.org/10.1016/j.chemosphere.2020.127138
Lv PH, Wang G-F, Wan Y, Liu J, Liu Q, Ma, F.-c. (2011) Bibliometric trend analysis on global graphene research. Scientometrics. 88(2):399–419. https://doi.org/10.1007/s11192-011-0386-x
Masmoudi-Soussi A, Hammas-Nasri I, Horchani-Naifer K, Ferid M (2020) Rare earths recovery by fractional precipitation from a sulfuric leach liquor obtained after phosphogypsum processing. Hydrometallurgy. 191:8. https://doi.org/10.1016/j.hydromet.2020.105253
Meyer PS, Yung JW, Ausubel JH (1999) A primer on logistic growth and substitution - the mathematics of the Loglet Lab software. Technol Forecast Soc Chang 61(3):247–271. https://doi.org/10.1016/s0040-1625(99)00021-9
Millan-Becerro R, Perez-Lopez R, Macias F, Canovas CR (2020) Design and optimization of sustainable passive treatment systems for phosphogypsum leachates in an orphan disposal site. J Environ Manag 275:111251. https://doi.org/10.1016/j.jenvman.2020.111251
Mohammed F, Biswas WK, Yao H, Tadé M (2018) Sustainability assessment of symbiotic processes for the reuse of phosphogypsum. J Clean Prod 188:497–507. https://doi.org/10.1016/j.jclepro.2018.03.309
Moreira RH, Queiroga FS, Paiva HA, Medina NH, Fontana G, Guazzelli MA (2018) Extraction of natural radionuclides in TENORM waste phosphogypsum. J Environ Chem Eng 6(5):6664–6668. https://doi.org/10.1016/j.jece.2018.10.019
Msila X, Billing DG, Barnard W (2016) Capture and storage of CO2 into waste phosphogypsum: the modified Merseburg process. Clean Technol. Environ Policy 18(8):2709–2715. https://doi.org/10.1007/s10098-016-1157-4
Nayak S, Mishra CSK, Guru BC, Samal S (2018) Histological anomalies and alterations in enzyme activities of the earthworm Glyphidrillus tuberosus exposed to high concentrations of phosphogypsum. Environ Monit Assess 190(9):529. https://doi.org/10.1007/s10661-018-6933-7
Peng B, Guo D, Qiao H, Yang Q, Zhang B, Hayat T, Alsaedi A, Ahmad B (2018) Bibliometric and visualized analysis of China’s coal research 2000–2015. J Clean Prod 197:1177–1189. https://doi.org/10.1016/j.jclepro.2018.06.283
Pérez-López R, Macías F, Cánovas CR, Sarmiento AM, Pérez-Moreno SM (2016) Pollutant flows from a phosphogypsum disposal area to an estuarine environment: an insight from geochemical signatures. Sci Total Environ 553:42–51. https://doi.org/10.1016/j.scitotenv.2016.02.070
Pinto SR, da Luz CA, Munhoz GS, Medeiros RA (2020) Durability of phosphogypsum-based supersulfated cement mortar against external attack by sodium and magnesium sulfate. Cem Concr Res 136:19. https://doi.org/10.1016/j.cemconres.2020.106172
Qamouche K, Chetaine A, Elyahyaoui A, Moussaif A, Touzani R, Benkdad A, Amsil H, Laraki K, Marah H (2020) Radiological characterization of phosphate rocks, phosphogypsum, phosphoric acid and phosphate fertilizers in Morocco: an assessment of the radiological hazard impact on the environment. Mater Today Proc 27:3234–3242. https://doi.org/10.1016/j.matpr.2020.04.703
Rashad AM (2015) Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles. J Clean Prod 87:717–725. https://doi.org/10.1016/j.jclepro.2014.09.080
Ru XH, Ma BG, Huang J, Huang Y (2012) Phosphogypsum transition to alpha-calcium sulfate hemihydrate in the presence of omongwaite in NaCl solutions under atmospheric pressure. J Am Ceram Soc 95(11):3478–3482. https://doi.org/10.1111/j.1551-2916.2012.05429.x
Ruiz Canovas C, Macias F, Perez Lopez R, Miguel Nieto J (2018) Mobility of rare earth elements, yttrium and scandium from a phosphogypsum stack: environmental and economic implications. Sci Total Environ 618:847–857. https://doi.org/10.1016/j.scitotenv.2017.08.220
Salo M, Knauf O, Makinen J, Yang XS, Koukkari P (2020) Integrated acid leaching and biological sulfate reduction of phosphogypsum for REE recovery. Miner Eng 155:7. https://doi.org/10.1016/j.mineng.2020.106408
Shen C, Yang M, Chen K Preparing high-strength water-resistant autoclaved brick comprises e.g. mixing phosphogypsum and quicklime to obtain mixture, spraying with water mist, allowing to stand, grinding and discharging to obtain modified phosphogypsum powder. In: FOSHAN JIUMO TECHNOLOGY INFORMATION CONS (FOSH-Non-standard)
Sheng Z, Zhou J, Shu Z, Yakubu Y, Chen Y, Wang W, Wang Y (2018) Calcium sulfate whisker reinforced non-fired ceramic tiles prepared from phosphogypsum. Bolet Soc Española Cerámica Vidrio 57(2):73–78. https://doi.org/10.1016/j.bsecv.2017.09.005
Sinfort C, Perignon M, Drogue S, Amiot MJ (2019) Dataset on potential environmental impacts of water deprivation and land use for food consumption in France and Tunisia. Data Brief 27:104661. https://doi.org/10.1016/j.dib.2019.104661
Sonnenwald DH (2007) Scientific collaboration. Annu Rev Inf Sci Technol 41:643–668. https://doi.org/10.1002/aris.2007.1440410121
Su Y, Xiong G, Lu F, He X, Chen S, Chen W, Yang J, Wang Y, Huang Z, Liu Q, Jiang Y Preparing phosphogypsum slurry material comprises mixing phosphogypsum hemihydrate powder, modified nano-phosphogypsum powder, fumed silica, nano-alumina aerogel powder, gypsum activator and water, and stirring. In: Univ Hubei Technology (Uyhi-C)
Sun Y, Zhai Y (2018) Mapping the knowledge domain and the theme evolution of appropriability research between 1986 and 2016: a scientometric review. Scientometrics 116(1):203–230. https://doi.org/10.1007/s11192-018-2748-0
Tayibi H, Choura M, Lopez FA, Alguacil FJ, Lopez-Delgado A (2009) Environmental impact and management of phosphogypsum. J Environ Manag 90(8):2377–2386. https://doi.org/10.1016/j.jenvman.2009.03.007
Tayibi H, Gasco C, Navarro N, Lopez-Delgado A, Alvarez A, Yaguee L, Alguacil FJ, Lopez FA (2011) Valorisation of phosphogypsum as building material: radiological aspects. Mater Constr 61(304):503–515. https://doi.org/10.3989/mc.2010.58910
Tsioka M, Voudrias EA (2020) Comparison of alternative management methods for phosphogypsum waste using life cycle analysis. J Clean Prod 266:12. https://doi.org/10.1016/j.jclepro.2020.121386
Vasconez-Maza MD, Bueso MC, Faz A, Acosta JA, Martinez-Segura MA (2021) Assessing the behaviour of heavy metals in abandoned phosphogypsum deposits combining electrical resistivity tomography and multivariate analysis. J Environ Manag 278(Pt 1):111517. https://doi.org/10.1016/j.jenvman.2020.111517
Vital C, Martins EP (2009) Using graph theory metrics to infer information flow through animal social groups: a computer simulation analysis. Ethology 115(4):347–355. https://doi.org/10.1111/j.1439-0310.2009.01613.x
Wang JM (2020) Utilization effects and environmental risks of phosphogypsum in agriculture: a review. J Clean Prod 276:123337. https://doi.org/10.1016/j.jclepro.2020.123337
Wang XW, Zhang X, Xu SM (2011) Patent co-citation networks of Fortune 500 companies. Scientometrics 88(3):761–770. https://doi.org/10.1007/s11192-011-0414-x
Wang CQ, Mei XD, Zhang C, Liu DS, Xu FL (2020) Mechanism study on co-processing of water-based drilling cuttings and phosphogypsum in non-autoclaved aerated concrete. Environ Sci Pollut Res 27(18):23364–23368. https://doi.org/10.1007/s11356-020-09029-z
Xu H, He Z, Yang B, Zhang Q, An G, Peng B, Song W, Xu W, Li G, Zhu G, Yang Y, Yao M, Wei M, Wang Q, Zhang Y, Shi H, Mi L, Liu X, Luo J, Cui J Preparing high-strength lightweight keel comprises performing gypsum pretreatment, calcination, and shaping of phosphogypsum, polypropylene fiber, water reducing agent, and strengthening materials. In: Guizhou Kailin Ardealite Comprehensive (Guiz-C)
Yang JK, Liu WC, Zhang LL, Xiao B (2009) Preparation of load-bearing building materials from autoclaved phosphogypsum. Constr Build Mater 23(2):687–693. https://doi.org/10.1016/j.conbuildmat.2008.02.011
Yang J, Ma LP, Dong SL, Liu HP, Zhao SQ, Cui XJ, Zheng DL, Yang J (2017) Theoretical and experimental demonstration of lignite chemical looping gasification of phosphogypsum oxygen carrier for syngas generation. Fuel 194:448–459. https://doi.org/10.1016/j.fuel.2016.12.077
Yang J, Ma LP, Zheng DL, Zhao SQ, Peng YH (2018) Reaction mechanism for syngas preparation by lignite chemical looping gasification using phosphogypsum oxygen carrier. Energy Fuel 32(7):7857–7867. https://doi.org/10.1021/acs.energyfuels.8b01112
Yang J, Wei Y, Yang J, Xiang HP, Ma LP, Zhang W, Wang LC, Peng YH, Liu HP (2019) Syngas production by chemical looping gasification using Fe supported on phosphogypsum compound oxygen carrier. Energy. 168:126–135. https://doi.org/10.1016/j.energy.2018.11.106
Yin D, Wang P, Tan D, Jian M Machine spraying heat preservation layer plastering gypsum comprises pre-treated phosphogypsum and accelerator and prepared by pretreating phosphogypsum and adjusting the pH of phosphogypsum to neutral or weakly alkaline, calcinating. Beijing New Building Material Gen Factor (Chnb-C)
Zeng LL, Bian X, Zhao L, Wang YJ, Hong ZS (2021) Effect of phosphogypsum on physiochemical and mechanical behaviour of cement stabilized dredged soil from Fuzhou, China. Geomech Energy Environ 25:100195. https://doi.org/10.1016/j.gete.2020.100195
Zhang W, Zhang WR (2018) Knowledge creation through industry chain in resource-based industry: case study on phosphorus chemical industry chain in western Guizhou of China. J Knowl Manag 22(5):1037–1060. https://doi.org/10.1108/jkm-02-2017-0061
Zhang GP, Shi Q, Li QN, Wang HT, Yuan HY, Guo WJ, Lu YF (2020a) Agents for sludge dewatering in fundamental research and applied research: A bibliometric analysis. J Clean Prod 273:122907. https://doi.org/10.1016/j.jclepro.2020.122907
Zhang W, Zhang FZ, Ma LP, Yang J, Wei Y, Kong DQ (2020b) CO2 capture and process reinforcement by hydrolysate of phosphogypsum decomposition products. J CO2 Util 36:253–262. https://doi.org/10.1016/j.jcou.2019.11.020
Zhou P, Shen P (n.d) Building putty powder thickening material comprises phosphogypsum, fly ash, cellulose ether, redispersible latex powder, water reducing agent, etherified starch and antifungal agent. GUANGDONG YUEGU BUILDING MATERIAL TECHNO (GUAN-Non-standard)
Zhou L, Huang Y, Chen B, Zhang C Method for manufacturing cold-formed thin-walled C-shaped steel edging phosphogypsum module filling wall, involves injecting polyurethane foam into gap between top of wall and bottom of beam, and completing construction of wall structure. Univ Guizhou (Uygz-C)
Zhou L, Ma H, Su Q, Zeng Y, Mo F, Zhao Y Phosphogypsum pretreatment device comprises first grade rinsing pool, secondary rinsing pool and washing pool, where first grade rinsing pool, secondary rinsing and washing pool are arranged from left to right and separated by clapboard. Univ Guilin Technology at Nanning (Uygi-C)
Zhu X Pretreatment system useful for industrial phosphogypsum, comprises e.g. control and management of the phosphogypsum entering the field includes the setting of the control items and detection methods. GUIZHOU SANDU SOUTHWEST CEMENT CO LTD (GUIZ-Non-standard)
Zupic I, Cater T (2015) Bibliometric methods in management and organization. Organ Res Methods 18(3):429–472. https://doi.org/10.1177/1094428114562629
Availability of data and materials
The datasets used and analyzed during the current study are available from the corresponding author on reasonable request.
Funding
This research is supported by the National Key R & D Program of China (2018YFC1903604).
Author information
Authors and Affiliations
Contributions
C YM: methodology, data collection and processing, writing — original draft, writing — review and editing. C Y: data collection and processing, visualization, writing — review and editing. Y XK: data collection and processing, visualization. L T: writing — review and editing. C IS: supervision. W J: conceptualization, supervision. All authors read and approved the final manuscript.
Corresponding authors
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
ESM 1
(DOCX 1.55 mb)
Rights and permissions
About this article
Cite this article
Cao, Y., Cui, Y., Yu, X. et al. Bibliometric analysis of phosphogypsum research from 1990 to 2020 based on literatures and patents. Environ Sci Pollut Res 28, 66845–66857 (2021). https://doi.org/10.1007/s11356-021-15237-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-021-15237-y