Erratum to: Exp Mech
DOI 10.1007/s11340-016-0152-3
The authors regret the following error. We have incorrectly uploaded the wrong Fig. 5(c). The correct figure is as shown here.
(c) Stress-time response (squares) and strain-time response (circles) for a Cu-10 sample loaded rapidly to a maximum stress (81 MPa) above the OPRA yield point (58 MPa) and then unloaded rapidly. Inset shows the stress–strain curve for this load-unload test which includes extensive plastic flow as well as anelastic strain recovery.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1007/s11340-016-0152-3.
Rights and permissions
About this article
Cite this article
Pandey, A., Wheeler, R., Shyam, A. et al. Erratum to: Onset of Plasticity via Relaxation Analysis (OPRA). Exp Mech 56, 1109 (2016). https://doi.org/10.1007/s11340-016-0166-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-016-0166-x