The effect of two-component bidisperse filler on the physico-mechanical and thermophysical properties of epoxy composites has been studied. A coating with an aluminum oxide content of 60 parts by weight and a crystalline boron content of 40 parts by weight per 100 parts by weight of ED-20 epoxy oligomer and 10 parts by weight of a hardener (polyethylenepolyamine) with improved operating characteristics has been developed. The reliability of the obtained results is verified by modern methods of investigation, i.e., by the thermogravimetric and differential thermal analysis of materials under investigation.
Similar content being viewed by others
References
T. S. Tikhomirova and A. N. Rassokha, “Anticorrosive epoxy composites. Effect of modifiers on internal stresses,” Vost.-Evrop. Zhurn. Peredov. Tekhnol., No. 1, 45–49 (2009).
A. V. Buketov and V. M. Krasnen’kyi, “Influence of the range of particle sizes of the filler on the adhesion strength and residual stresses in epoxy composites,” Mater. Sci., 48, No. 4, 521–530 (2013).
A. V. Buketov, Yu. A. Karpenko, O. O. Sapronov, and V. O. Skirdenko, “Effect of pulsed magnetic field on properties of epoxy nanocomposites,” Metallurgy, 51, No. 3, 385 (2012).
K. Jung-il, P. H. Kang, and Y. C. Nho, “Positive temperature coefficient behavior of polymer composites having a high melting temperature,” J. Appl. Polym. Sci., 92, 394–401 (2004).
T. Niranjana Prabhu, V. Harish, and N. Demappa, “Thermal degradation of HDPE short fibers reinforced epoxy composites,” IOSR J. Appl. Chem., 2, Issue 1, 39–44 (2012).
R. A. Yakovleva, A. N. Grigorenko, and A. M. Bezuglyi, “Effect of additives on the processes of thermal oxidative destruction of filled epoxy polymers,” Visn. KNUTD, 2, Issue 5 (25), 192–196 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Problemy Prochnosti, No. 5, pp. 160 – 167, September – October, 2014.
Rights and permissions
About this article
Cite this article
Buketov, A.V., Sapronov, O.O. & Brailo, M.V. Investigation of the Physico-Mechanical and Thermophysical Properties of Epoxy Composites with a Two-Component Bidisperse Filler. Strength Mater 46, 717–723 (2014). https://doi.org/10.1007/s11223-014-9605-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-014-9605-z